Golang ipcmd.NewTransaction函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Golang中github.com/openshift/origin/pkg/util/ipcmd.NewTransaction函数的典型用法代码示例。如果您正苦于以下问题：Golang NewTransaction函数的具体用法？Golang NewTransaction怎么用？Golang NewTransaction使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了NewTransaction函数的7个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Golang代码示例。

示例1: deleteLocalSubnetRoute

func deleteLocalSubnetRoute(device, localSubnetCIDR string) {
	backoff := utilwait.Backoff{
		Duration: 100 * time.Millisecond,
		Factor:   1.25,
		Steps:    6,
	}
	err := utilwait.ExponentialBackoff(backoff, func() (bool, error) {
		itx := ipcmd.NewTransaction(kexec.New(), device)
		routes, err := itx.GetRoutes()
		if err != nil {
			return false, fmt.Errorf("could not get routes: %v", err)
		}
		for _, route := range routes {
			if strings.Contains(route, localSubnetCIDR) {
				itx.DeleteRoute(localSubnetCIDR)
				err = itx.EndTransaction()
				if err != nil {
					return false, fmt.Errorf("could not delete route: %v", err)
				}
				return true, nil
			}
		}
		return false, nil
	})

	if err != nil {
		glog.Errorf("Error removing %s route from dev %s: %v; if the route appears later it will not be deleted.", localSubnetCIDR, device, err)
	}
}

开发者ID:thrasher-redhat，项目名称:origin，代码行数:29，代码来源:controller.go

示例2: dockerPreCNICleanup

// Detect whether we are upgrading from a pre-CNI openshift and clean up
// interfaces and iptables rules that are no longer required
func (node *OsdnNode) dockerPreCNICleanup() error {
	exec := kexec.New()
	itx := ipcmd.NewTransaction(exec, "lbr0")
	itx.SetLink("down")
	if err := itx.EndTransaction(); err != nil {
		// no cleanup required
		return nil
	}

	node.clearLbr0IptablesRule = true

	// Restart docker to kill old pods and make it use docker0 again.
	// "systemctl restart" will bail out (unnecessarily) in the
	// OpenShift-in-a-container case, so we work around that by sending
	// the messages by hand.
	if _, err := osexec.Command("dbus-send", "--system", "--print-reply", "--reply-timeout=2000", "--type=method_call", "--dest=org.freedesktop.systemd1", "/org/freedesktop/systemd1", "org.freedesktop.systemd1.Manager.Reload").CombinedOutput(); err != nil {
		log.Error(err)
	}
	if _, err := osexec.Command("dbus-send", "--system", "--print-reply", "--reply-timeout=2000", "--type=method_call", "--dest=org.freedesktop.systemd1", "/org/freedesktop/systemd1", "org.freedesktop.systemd1.Manager.RestartUnit", "string:'docker.service' string:'replace'").CombinedOutput(); err != nil {
		log.Error(err)
	}

	// Delete pre-CNI interfaces
	for _, intf := range []string{"lbr0", "vovsbr", "vlinuxbr"} {
		itx := ipcmd.NewTransaction(exec, intf)
		itx.DeleteLink()
		itx.IgnoreError()
		itx.EndTransaction()
	}

	// Wait until docker has restarted since kubelet will exit it docker isn't running
	dockerClient, err := docker.NewClientFromEnv()
	if err != nil {
		return fmt.Errorf("failed to get docker client: %v", err)
	}
	err = kwait.ExponentialBackoff(
		kwait.Backoff{
			Duration: 100 * time.Millisecond,
			Factor:   1.2,
			Steps:    6,
		},
		func() (bool, error) {
			if err := dockerClient.Ping(); err != nil {
				// wait longer
				return false, nil
			}
			return true, nil
		})
	if err != nil {
		return fmt.Errorf("failed to connect to docker after SDN cleanup restart: %v", err)
	}

	log.Infof("Cleaned up left-over openshift-sdn docker bridge and interfaces")

	return nil
}

开发者ID:php-coder，项目名称:origin，代码行数:58，代码来源:node.go

示例3: deleteLocalSubnetRoute

func deleteLocalSubnetRoute(device, localSubnetCIDR string) {
	const (
		timeInterval = 100 * time.Millisecond
		maxIntervals = 20
	)

	for i := 0; i < maxIntervals; i++ {
		itx := ipcmd.NewTransaction(kexec.New(), device)
		routes, err := itx.GetRoutes()
		if err != nil {
			glog.Errorf("Could not get routes for dev %s: %v", device, err)
			return
		}
		for _, route := range routes {
			if strings.Contains(route, localSubnetCIDR) {
				itx.DeleteRoute(localSubnetCIDR)
				err = itx.EndTransaction()
				if err != nil {
					glog.Errorf("Could not delete subnet route %s from dev %s: %v", localSubnetCIDR, device, err)
				}
				return
			}
		}

		time.Sleep(timeInterval)
	}

	glog.Errorf("Timed out looking for %s route for dev %s; if it appears later it will not be deleted.", localSubnetCIDR, device)
}

开发者ID:pecameron，项目名称:origin，代码行数:29，代码来源:controller.go

示例4: alreadySetUp

func alreadySetUp(multitenant bool, localSubnetGatewayCIDR string) bool {
	var found bool

	exec := kexec.New()
	itx := ipcmd.NewTransaction(exec, LBR)
	addrs, err := itx.GetAddresses()
	itx.EndTransaction()
	if err != nil {
		return false
	}
	found = false
	for _, addr := range addrs {
		if addr == localSubnetGatewayCIDR {
			found = true
			break
		}
	}
	if !found {
		return false
	}

	otx := ovs.NewTransaction(exec, BR)
	flows, err := otx.DumpFlows()
	otx.EndTransaction()
	if err != nil {
		return false
	}
	found = false
	for _, flow := range flows {
		if !strings.Contains(flow, VERSION_TABLE) {
			continue
		}
		idx := strings.Index(flow, VERSION_ACTION)
		if idx < 0 {
			continue
		}

		// OVS note action format hex bytes separated by '.'; first
		// byte is plugin type (multi-tenant/single-tenant) and second
		// byte is flow rule version
		expected := getPluginVersion(multitenant)
		existing := strings.Split(flow[idx+len(VERSION_ACTION):], ".")
		if len(existing) >= 2 && existing[0] == expected[0] && existing[1] == expected[1] {
			found = true
			break
		}
	}
	if !found {
		return false
	}

	return true
}

开发者ID:tracyrankin，项目名称:origin，代码行数:53，代码来源:controller.go

示例5: alreadySetUp

func (plugin *OsdnNode) alreadySetUp(localSubnetGatewayCIDR, clusterNetworkCIDR string) bool {
	var found bool

	exec := kexec.New()
	itx := ipcmd.NewTransaction(exec, TUN)
	addrs, err := itx.GetAddresses()
	itx.EndTransaction()
	if err != nil {
		return false
	}
	found = false
	for _, addr := range addrs {
		if strings.Contains(addr, localSubnetGatewayCIDR+" ") {
			found = true
			break
		}
	}
	if !found {
		return false
	}

	itx = ipcmd.NewTransaction(exec, TUN)
	routes, err := itx.GetRoutes()
	itx.EndTransaction()
	if err != nil {
		return false
	}
	found = false
	for _, route := range routes {
		if strings.Contains(route, clusterNetworkCIDR+" ") {
			found = true
			break
		}
	}
	if !found {
		return false
	}

	flows, err := plugin.ovs.DumpFlows()
	if err != nil {
		return false
	}
	found = false
	for _, flow := range flows {
		if !strings.Contains(flow, VERSION_TABLE) {
			continue
		}
		idx := strings.Index(flow, VERSION_ACTION)
		if idx < 0 {
			continue
		}

		// OVS note action format hex bytes separated by '.'; first
		// byte is plugin type (multi-tenant/single-tenant) and second
		// byte is flow rule version
		expected := getPluginVersion(plugin.multitenant)
		existing := strings.Split(flow[idx+len(VERSION_ACTION):], ".")
		if len(existing) >= 2 && existing[0] == expected[0] && existing[1] == expected[1] {
			found = true
			break
		}
	}
	if !found {
		return false
	}

	return true
}

开发者ID:thrasher-redhat，项目名称:origin，代码行数:68，代码来源:controller.go

示例6: SetupSDN

func (plugin *OsdnNode) SetupSDN() (bool, error) {
	clusterNetworkCIDR := plugin.networkInfo.ClusterNetwork.String()
	serviceNetworkCIDR := plugin.networkInfo.ServiceNetwork.String()

	localSubnetCIDR := plugin.localSubnetCIDR
	_, ipnet, err := net.ParseCIDR(localSubnetCIDR)
	localSubnetMaskLength, _ := ipnet.Mask.Size()
	localSubnetGateway := netutils.GenerateDefaultGateway(ipnet).String()

	glog.V(5).Infof("[SDN setup] node pod subnet %s gateway %s", ipnet.String(), localSubnetGateway)

	exec := kexec.New()

	if plugin.clearLbr0IptablesRule {
		// Delete docker's left-over lbr0 rule; cannot do this from
		// NewNodePlugin (where docker is cleaned up) because we need
		// localSubnetCIDR which is only valid after plugin start
		ipt := iptables.New(exec, utildbus.New(), iptables.ProtocolIpv4)
		ipt.DeleteRule(iptables.TableNAT, iptables.ChainPostrouting, "-s", localSubnetCIDR, "!", "-o", "lbr0", "-j", "MASQUERADE")
	}

	gwCIDR := fmt.Sprintf("%s/%d", localSubnetGateway, localSubnetMaskLength)
	if plugin.alreadySetUp(gwCIDR, clusterNetworkCIDR) {
		glog.V(5).Infof("[SDN setup] no SDN setup required")
		return false, nil
	}
	glog.V(5).Infof("[SDN setup] full SDN setup required")

	if err := os.MkdirAll("/run/openshift-sdn", 0700); err != nil {
		return false, err
	}
	config := fmt.Sprintf("export OPENSHIFT_CLUSTER_SUBNET=%s", clusterNetworkCIDR)
	err = ioutil.WriteFile("/run/openshift-sdn/config.env", []byte(config), 0644)
	if err != nil {
		return false, err
	}

	err = plugin.ovs.AddBridge("fail-mode=secure", "protocols=OpenFlow13")
	if err != nil {
		return false, err
	}
	_ = plugin.ovs.DeletePort(VXLAN)
	_, err = plugin.ovs.AddPort(VXLAN, 1, "type=vxlan", `options:remote_ip="flow"`, `options:key="flow"`)
	if err != nil {
		return false, err
	}
	_ = plugin.ovs.DeletePort(TUN)
	_, err = plugin.ovs.AddPort(TUN, 2, "type=internal")
	if err != nil {
		return false, err
	}

	otx := plugin.ovs.NewTransaction()
	// Table 0: initial dispatch based on in_port
	// vxlan0
	otx.AddFlow("table=0, priority=200, in_port=1, arp, nw_src=%s, nw_dst=%s, actions=move:NXM_NX_TUN_ID[0..31]->NXM_NX_REG0[],goto_table:1", clusterNetworkCIDR, localSubnetCIDR)
	otx.AddFlow("table=0, priority=200, in_port=1, ip, nw_src=%s, nw_dst=%s, actions=move:NXM_NX_TUN_ID[0..31]->NXM_NX_REG0[],goto_table:1", clusterNetworkCIDR, localSubnetCIDR)
	otx.AddFlow("table=0, priority=150, in_port=1, actions=drop")
	// tun0
	otx.AddFlow("table=0, priority=200, in_port=2, arp, nw_src=%s, nw_dst=%s, actions=goto_table:5", localSubnetGateway, clusterNetworkCIDR)
	otx.AddFlow("table=0, priority=200, in_port=2, ip, actions=goto_table:5")
	otx.AddFlow("table=0, priority=150, in_port=2, actions=drop")
	// else, from a container
	otx.AddFlow("table=0, priority=100, arp, actions=goto_table:2")
	otx.AddFlow("table=0, priority=100, ip, actions=goto_table:2")
	otx.AddFlow("table=0, priority=0, actions=drop")

	// Table 1: VXLAN ingress filtering; filled in by AddHostSubnetRules()
	// eg, "table=1, priority=100, tun_src=${remote_node_ip}, actions=goto_table:5"
	otx.AddFlow("table=1, priority=0, actions=drop")

	// Table 2: from OpenShift container; validate IP/MAC, assign tenant-id; filled in by openshift-sdn-ovs
	// eg, "table=2, priority=100, in_port=${ovs_port}, arp, nw_src=${ipaddr}, arp_sha=${macaddr}, actions=load:${tenant_id}->NXM_NX_REG0[], goto_table:5"
	//     "table=2, priority=100, in_port=${ovs_port}, ip, nw_src=${ipaddr}, actions=load:${tenant_id}->NXM_NX_REG0[], goto_table:3"
	// (${tenant_id} is always 0 for single-tenant)
	otx.AddFlow("table=2, priority=0, actions=drop")

	// Table 3: from OpenShift container; service vs non-service
	otx.AddFlow("table=3, priority=100, ip, nw_dst=%s, actions=goto_table:4", serviceNetworkCIDR)
	otx.AddFlow("table=3, priority=0, actions=goto_table:5")

	// Table 4: from OpenShift container; service dispatch; filled in by AddServiceRules()
	otx.AddFlow("table=4, priority=200, reg0=0, actions=output:2")
	// eg, "table=4, priority=100, reg0=${tenant_id}, ${service_proto}, nw_dst=${service_ip}, tp_dst=${service_port}, actions=output:2"
	otx.AddFlow("table=4, priority=0, actions=drop")

	// Table 5: general routing
	otx.AddFlow("table=5, priority=300, arp, nw_dst=%s, actions=output:2", localSubnetGateway)
	otx.AddFlow("table=5, priority=300, ip, nw_dst=%s, actions=output:2", localSubnetGateway)
	otx.AddFlow("table=5, priority=200, arp, nw_dst=%s, actions=goto_table:6", localSubnetCIDR)
	otx.AddFlow("table=5, priority=200, ip, nw_dst=%s, actions=goto_table:7", localSubnetCIDR)
	otx.AddFlow("table=5, priority=100, arp, nw_dst=%s, actions=goto_table:8", clusterNetworkCIDR)
	otx.AddFlow("table=5, priority=100, ip, nw_dst=%s, actions=goto_table:8", clusterNetworkCIDR)
	otx.AddFlow("table=5, priority=0, ip, actions=goto_table:9")
	otx.AddFlow("table=5, priority=0, arp, actions=drop")

	// Table 6: ARP to container, filled in by openshift-sdn-ovs
	// eg, "table=6, priority=100, arp, nw_dst=${container_ip}, actions=output:${ovs_port}"
	otx.AddFlow("table=6, priority=0, actions=drop")

//.........这里部分代码省略.........

开发者ID:thrasher-redhat，项目名称:origin，代码行数:101，代码来源:controller.go

示例7: SetupSDN

func (plugin *OsdnNode) SetupSDN() (bool, error) {
	localSubnetCIDR, err := plugin.getLocalSubnet()
	if err != nil {
		return false, err
	}
	clusterNetworkCIDR := plugin.networkInfo.ClusterNetwork.String()
	serviceNetworkCIDR := plugin.networkInfo.ServiceNetwork.String()

	_, ipnet, err := net.ParseCIDR(localSubnetCIDR)
	localSubnetMaskLength, _ := ipnet.Mask.Size()
	localSubnetGateway := netutils.GenerateDefaultGateway(ipnet).String()

	glog.V(5).Infof("[SDN setup] node pod subnet %s gateway %s", ipnet.String(), localSubnetGateway)

	gwCIDR := fmt.Sprintf("%s/%d", localSubnetGateway, localSubnetMaskLength)
	if plugin.alreadySetUp(gwCIDR, clusterNetworkCIDR) {
		glog.V(5).Infof("[SDN setup] no SDN setup required")
		return false, nil
	}
	glog.V(5).Infof("[SDN setup] full SDN setup required")

	mtuStr := fmt.Sprint(plugin.mtu)

	exec := kexec.New()
	itx := ipcmd.NewTransaction(exec, LBR)
	itx.SetLink("down")
	itx.IgnoreError()
	itx.DeleteLink()
	itx.IgnoreError()
	itx.AddLink("type", "bridge")
	itx.AddAddress(gwCIDR)
	itx.SetLink("up")
	err = itx.EndTransaction()
	if err != nil {
		glog.Errorf("Failed to configure docker bridge: %v", err)
		return false, err
	}
	defer deleteLocalSubnetRoute(LBR, localSubnetCIDR)

	glog.V(5).Infof("[SDN setup] docker setup %s mtu %s", LBR, mtuStr)
	out, err := exec.Command("openshift-sdn-docker-setup.sh", LBR, mtuStr).CombinedOutput()
	if err != nil {
		glog.Errorf("Failed to configure docker networking: %v\n%s", err, out)
		return false, err
	} else {
		glog.V(5).Infof("[SDN setup] docker setup success:\n%s", out)
	}

	config := fmt.Sprintf("export OPENSHIFT_CLUSTER_SUBNET=%s", clusterNetworkCIDR)
	err = ioutil.WriteFile("/run/openshift-sdn/config.env", []byte(config), 0644)
	if err != nil {
		return false, err
	}

	itx = ipcmd.NewTransaction(exec, VLINUXBR)
	itx.DeleteLink()
	itx.IgnoreError()
	itx.AddLink("mtu", mtuStr, "type", "veth", "peer", "name", VOVSBR, "mtu", mtuStr)
	itx.SetLink("up")
	itx.SetLink("txqueuelen", "0")
	err = itx.EndTransaction()
	if err != nil {
		return false, err
	}

	itx = ipcmd.NewTransaction(exec, VOVSBR)
	itx.SetLink("up")
	itx.SetLink("txqueuelen", "0")
	err = itx.EndTransaction()
	if err != nil {
		return false, err
	}

	itx = ipcmd.NewTransaction(exec, LBR)
	itx.AddSlave(VLINUXBR)
	err = itx.EndTransaction()
	if err != nil {
		return false, err
	}

	err = plugin.ovs.AddBridge("fail-mode=secure", "protocols=OpenFlow13")
	if err != nil {
		return false, err
	}
	_ = plugin.ovs.DeletePort(VXLAN)
	_, err = plugin.ovs.AddPort(VXLAN, 1, "type=vxlan", `options:remote_ip="flow"`, `options:key="flow"`)
	if err != nil {
		return false, err
	}
	_ = plugin.ovs.DeletePort(TUN)
	_, err = plugin.ovs.AddPort(TUN, 2, "type=internal")
	if err != nil {
		return false, err
	}
	_, err = plugin.ovs.AddPort(VOVSBR, 3)
	if err != nil {
		return false, err
	}

	otx := plugin.ovs.NewTransaction()
//.........这里部分代码省略.........

开发者ID:pweil-，项目名称:origin，代码行数:101，代码来源:controller.go

注：本文中的github.com/openshift/origin/pkg/util/ipcmd.NewTransaction函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。