本文整理汇总了Golang中github.com/v2ray/v2ray-core/common/net.NewTimeOutReader函数的典型用法代码示例。如果您正苦于以下问题:Golang NewTimeOutReader函数的具体用法?Golang NewTimeOutReader怎么用?Golang NewTimeOutReader使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了NewTimeOutReader函数的18个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的Golang代码示例。
示例1: Dispatch
func (this *FreedomConnection) Dispatch(firstPacket v2net.Packet, ray ray.OutboundRay) error {
log.Info("Freedom: Opening connection to ", firstPacket.Destination())
var conn net.Conn
err := retry.Timed(5, 100).On(func() error {
rawConn, err := dialer.Dial(firstPacket.Destination())
if err != nil {
return err
}
conn = rawConn
return nil
})
if err != nil {
close(ray.OutboundOutput())
log.Error("Freedom: Failed to open connection to ", firstPacket.Destination(), ": ", err)
return err
}
defer conn.Close()
input := ray.OutboundInput()
output := ray.OutboundOutput()
var readMutex, writeMutex sync.Mutex
readMutex.Lock()
writeMutex.Lock()
if chunk := firstPacket.Chunk(); chunk != nil {
conn.Write(chunk.Value)
chunk.Release()
}
if !firstPacket.MoreChunks() {
writeMutex.Unlock()
} else {
go func() {
v2io.ChanToRawWriter(conn, input)
writeMutex.Unlock()
}()
}
go func() {
defer readMutex.Unlock()
defer close(output)
var reader io.Reader = conn
if firstPacket.Destination().IsUDP() {
reader = v2net.NewTimeOutReader(16 /* seconds */, conn)
}
v2io.RawReaderToChan(output, reader)
}()
writeMutex.Lock()
if tcpConn, ok := conn.(*net.TCPConn); ok {
tcpConn.CloseWrite()
}
readMutex.Lock()
return nil
}
开发者ID:orvice,项目名称:v2ray-core,代码行数:60,代码来源:freedom.go
示例2: handleConnection
func (this *Server) handleConnection(connection internet.Connection) {
defer connection.Close()
timedReader := v2net.NewTimeOutReader(this.config.Timeout, connection)
reader := v2io.NewBufferedReader(timedReader)
defer reader.Release()
writer := v2io.NewBufferedWriter(connection)
defer writer.Release()
auth, auth4, err := protocol.ReadAuthentication(reader)
if err != nil && err != protocol.Socks4Downgrade {
if err != io.EOF {
log.Warning("Socks: failed to read authentication: ", err)
}
return
}
clientAddr := connection.RemoteAddr().String()
if err != nil && err == protocol.Socks4Downgrade {
this.handleSocks4(clientAddr, reader, writer, auth4)
} else {
this.handleSocks5(clientAddr, reader, writer, auth)
}
}
开发者ID:yueyingjuesha,项目名称:v2ray-core,代码行数:25,代码来源:server.go
示例3: handleConnection
func (this *Server) handleConnection(conn internet.Connection) {
defer conn.Close()
timedReader := v2net.NewTimeOutReader(this.config.Timeout, conn)
reader := bufio.NewReaderSize(timedReader, 2048)
request, err := http.ReadRequest(reader)
if err != nil {
if err != io.EOF {
log.Warning("HTTP: Failed to read http request: ", err)
}
return
}
log.Info("HTTP: Request to Method [", request.Method, "] Host [", request.Host, "] with URL [", request.URL, "]")
defaultPort := v2net.Port(80)
if strings.ToLower(request.URL.Scheme) == "https" {
defaultPort = v2net.Port(443)
}
host := request.Host
if len(host) == 0 {
host = request.URL.Host
}
dest, err := parseHost(host, defaultPort)
if err != nil {
log.Warning("HTTP: Malformed proxy host (", host, "): ", err)
return
}
log.Access(conn.RemoteAddr(), request.URL, log.AccessAccepted, "")
if strings.ToUpper(request.Method) == "CONNECT" {
this.handleConnect(request, dest, reader, conn)
} else {
this.handlePlainHTTP(request, dest, reader, conn)
}
}
开发者ID:ChoyesYan,项目名称:v2ray-core,代码行数:33,代码来源:server.go
示例4: HandleConnection
func (this *VMessInboundHandler) HandleConnection(connection *net.TCPConn) error {
defer connection.Close()
connReader := v2net.NewTimeOutReader(16, connection)
requestReader := protocol.NewVMessRequestReader(this.clients)
request, err := requestReader.Read(connReader)
if err != nil {
log.Access(connection.RemoteAddr().String(), "", log.AccessRejected, err.Error())
log.Warning("VMessIn: Invalid request from (%s): %v", connection.RemoteAddr().String(), err)
return err
}
log.Access(connection.RemoteAddr().String(), request.Address.String(), log.AccessAccepted, "")
log.Debug("VMessIn: Received request for %s", request.Address.String())
ray := this.space.PacketDispatcher().DispatchToOutbound(v2net.NewPacket(request.Destination(), nil, true))
input := ray.InboundInput()
output := ray.InboundOutput()
var readFinish, writeFinish sync.Mutex
readFinish.Lock()
writeFinish.Lock()
userSettings := vmess.GetUserSettings(request.User.Level)
connReader.SetTimeOut(userSettings.PayloadReadTimeout)
go handleInput(request, connReader, input, &readFinish)
responseKey := md5.Sum(request.RequestKey)
responseIV := md5.Sum(request.RequestIV)
aesStream, err := v2crypto.NewAesEncryptionStream(responseKey[:], responseIV[:])
if err != nil {
log.Error("VMessIn: Failed to create AES decryption stream: %v", err)
close(input)
return err
}
responseWriter := v2crypto.NewCryptionWriter(aesStream, connection)
// Optimize for small response packet
buffer := alloc.NewLargeBuffer().Clear()
defer buffer.Release()
buffer.AppendBytes(request.ResponseHeader[0] ^ request.ResponseHeader[1])
buffer.AppendBytes(request.ResponseHeader[2] ^ request.ResponseHeader[3])
buffer.AppendBytes(byte(0), byte(0))
if data, open := <-output; open {
buffer.Append(data.Value)
data.Release()
responseWriter.Write(buffer.Value)
go handleOutput(request, responseWriter, output, &writeFinish)
writeFinish.Lock()
}
connection.CloseWrite()
readFinish.Lock()
return nil
}
开发者ID:ducktsmt,项目名称:v2ray-core,代码行数:58,代码来源:inbound.go
示例5: HandleConnection
func (handler *VMessInboundHandler) HandleConnection(connection *net.TCPConn) error {
defer connection.Close()
connReader := v2net.NewTimeOutReader(16, connection)
requestReader := protocol.NewVMessRequestReader(handler.clients)
request, err := requestReader.Read(connReader)
if err != nil {
log.Access(connection.RemoteAddr().String(), "", log.AccessRejected, err.Error())
log.Warning("VMessIn: Invalid request from (%s): %v", connection.RemoteAddr().String(), err)
return err
}
log.Access(connection.RemoteAddr().String(), request.Address.String(), log.AccessAccepted, "")
log.Debug("VMessIn: Received request for %s", request.Address.String())
ray := handler.dispatcher.DispatchToOutbound(v2net.NewPacket(request.Destination(), nil, true))
input := ray.InboundInput()
output := ray.InboundOutput()
var readFinish, writeFinish sync.Mutex
readFinish.Lock()
writeFinish.Lock()
connReader.SetTimeOut(120)
go handleInput(request, connReader, input, &readFinish)
responseKey := md5.Sum(request.RequestKey)
responseIV := md5.Sum(request.RequestIV)
responseWriter, err := v2io.NewAesEncryptWriter(responseKey[:], responseIV[:], connection)
if err != nil {
log.Error("VMessIn: Failed to create encrypt writer: %v", err)
return err
}
// Optimize for small response packet
buffer := alloc.NewLargeBuffer().Clear()
buffer.Append(request.ResponseHeader)
if data, open := <-output; open {
buffer.Append(data.Value)
data.Release()
responseWriter.Write(buffer.Value)
buffer.Release()
go handleOutput(request, responseWriter, output, &writeFinish)
writeFinish.Lock()
}
connection.CloseWrite()
readFinish.Lock()
return nil
}
开发者ID:amazted,项目名称:v2ray-core,代码行数:52,代码来源:vmessin.go
示例6: HandleTCPConnection
func (this *DokodemoDoor) HandleTCPConnection(conn internet.Connection) {
defer conn.Close()
var dest v2net.Destination
if this.config.FollowRedirect {
originalDest := GetOriginalDestination(conn)
if originalDest != nil {
log.Info("Dokodemo: Following redirect to: ", originalDest)
dest = originalDest
}
}
if dest == nil && this.address != nil && this.port > v2net.Port(0) {
dest = v2net.TCPDestination(this.address, this.port)
}
if dest == nil {
log.Info("Dokodemo: Unknown destination, stop forwarding...")
return
}
log.Info("Dokodemo: Handling request to ", dest)
ray := this.packetDispatcher.DispatchToOutbound(dest)
defer ray.InboundOutput().Release()
var inputFinish, outputFinish sync.Mutex
inputFinish.Lock()
outputFinish.Lock()
reader := v2net.NewTimeOutReader(this.config.Timeout, conn)
defer reader.Release()
go func() {
v2reader := v2io.NewAdaptiveReader(reader)
defer v2reader.Release()
v2io.Pipe(v2reader, ray.InboundInput())
inputFinish.Unlock()
ray.InboundInput().Close()
}()
go func() {
v2writer := v2io.NewAdaptiveWriter(conn)
defer v2writer.Release()
v2io.Pipe(ray.InboundOutput(), v2writer)
outputFinish.Unlock()
}()
outputFinish.Lock()
inputFinish.Lock()
}
开发者ID:ChoyesYan,项目名称:v2ray-core,代码行数:51,代码来源:dokodemo.go
示例7: HandleConnection
func (handler *VMessInboundHandler) HandleConnection(connection net.Conn) error {
defer connection.Close()
connReader := v2net.NewTimeOutReader(4, connection)
requestReader := protocol.NewVMessRequestReader(handler.clients)
request, err := requestReader.Read(connReader)
if err != nil {
log.Warning("VMessIn: Invalid request from (%s): %v", connection.RemoteAddr().String(), err)
return err
}
log.Debug("VMessIn: Received request for %s", request.Address.String())
ray := handler.vPoint.DispatchToOutbound(v2net.NewPacket(request.Destination(), nil, true))
input := ray.InboundInput()
output := ray.InboundOutput()
var readFinish, writeFinish sync.Mutex
readFinish.Lock()
writeFinish.Lock()
go handleInput(request, connReader, input, &readFinish)
responseKey := md5.Sum(request.RequestKey[:])
responseIV := md5.Sum(request.RequestIV[:])
response := protocol.NewVMessResponse(request)
responseWriter, err := v2io.NewAesEncryptWriter(responseKey[:], responseIV[:], connection)
if err != nil {
return log.Error("VMessIn: Failed to create encrypt writer: %v", err)
}
// Optimize for small response packet
buffer := make([]byte, 0, 2*1024)
buffer = append(buffer, response[:]...)
if data, open := <-output; open {
buffer = append(buffer, data...)
responseWriter.Write(buffer)
go handleOutput(request, responseWriter, output, &writeFinish)
writeFinish.Lock()
}
if tcpConn, ok := connection.(*net.TCPConn); ok {
tcpConn.CloseWrite()
}
readFinish.Lock()
return nil
}
开发者ID:nenew,项目名称:v2ray-core,代码行数:49,代码来源:vmessin.go
示例8: HandleTCPConnection
func (this *DokodemoDoor) HandleTCPConnection(conn *hub.TCPConn) {
defer conn.Close()
packet := v2net.NewPacket(v2net.TCPDestination(this.address, this.port), nil, true)
ray := this.packetDispatcher.DispatchToOutbound(packet)
var inputFinish, outputFinish sync.Mutex
inputFinish.Lock()
outputFinish.Lock()
reader := v2net.NewTimeOutReader(this.config.Timeout, conn)
go dumpInput(reader, ray.InboundInput(), &inputFinish)
go dumpOutput(conn, ray.InboundOutput(), &outputFinish)
outputFinish.Lock()
}
开发者ID:earthGavinLee,项目名称:v2ray-core,代码行数:16,代码来源:dokodemo.go
示例9: HandleConnection
func (server *SocksServer) HandleConnection(connection net.Conn) error {
defer connection.Close()
reader := v2net.NewTimeOutReader(4, connection)
auth, auth4, err := protocol.ReadAuthentication(reader)
if err != nil && !errors.HasCode(err, 1000) {
log.Error("Socks failed to read authentication: %v", err)
return err
}
if err != nil && errors.HasCode(err, 1000) {
return server.handleSocks4(reader, connection, auth4)
} else {
return server.handleSocks5(reader, connection, auth)
}
}
开发者ID:iusky,项目名称:v2ray-core,代码行数:17,代码来源:socks.go
示例10: handleConnection
func (this *SocksServer) handleConnection(connection *hub.TCPConn) {
defer connection.Close()
reader := v2net.NewTimeOutReader(120, connection)
auth, auth4, err := protocol.ReadAuthentication(reader)
if err != nil && err != protocol.Socks4Downgrade {
log.Error("Socks: failed to read authentication: ", err)
return
}
if err != nil && err == protocol.Socks4Downgrade {
this.handleSocks4(reader, connection, auth4)
} else {
this.handleSocks5(reader, connection, auth)
}
}
开发者ID:jim1568cas,项目名称:v2ray-core,代码行数:17,代码来源:socks.go
示例11: HandleConnection
func (server *SocksServer) HandleConnection(connection *net.TCPConn) error {
defer connection.Close()
reader := v2net.NewTimeOutReader(120, connection)
auth, auth4, err := protocol.ReadAuthentication(reader)
if err != nil && err != protocol.Socks4Downgrade {
log.Error("Socks failed to read authentication: %v", err)
return err
}
if err != nil && err == protocol.Socks4Downgrade {
return server.handleSocks4(reader, connection, auth4)
} else {
return server.handleSocks5(reader, connection, auth)
}
}
开发者ID:kennshi,项目名称:v2ray-core,代码行数:17,代码来源:socks.go
示例12: handleConnection
func (this *Server) handleConnection(conn internet.Connection) {
defer conn.Close()
buffer := alloc.NewSmallBuffer()
defer buffer.Release()
timedReader := v2net.NewTimeOutReader(16, conn)
defer timedReader.Release()
bufferedReader := v2io.NewBufferedReader(timedReader)
defer bufferedReader.Release()
ivLen := this.config.Cipher.IVSize()
_, err := io.ReadFull(bufferedReader, buffer.Value[:ivLen])
if err != nil {
if err != io.EOF {
log.Access(conn.RemoteAddr(), "", log.AccessRejected, err)
log.Warning("Shadowsocks: Failed to read IV: ", err)
}
return
}
iv := buffer.Value[:ivLen]
key := this.config.Key
stream, err := this.config.Cipher.NewDecodingStream(key, iv)
if err != nil {
log.Error("Shadowsocks: Failed to create decoding stream: ", err)
return
}
reader := crypto.NewCryptionReader(stream, bufferedReader)
request, err := ReadRequest(reader, NewAuthenticator(HeaderKeyGenerator(key, iv)), false)
if err != nil {
log.Access(conn.RemoteAddr(), "", log.AccessRejected, err)
log.Warning("Shadowsocks: Invalid request from ", conn.RemoteAddr(), ": ", err)
return
}
defer request.Release()
bufferedReader.SetCached(false)
userSettings := protocol.GetUserSettings(this.config.Level)
timedReader.SetTimeOut(userSettings.PayloadReadTimeout)
dest := v2net.TCPDestination(request.Address, request.Port)
log.Access(conn.RemoteAddr(), dest, log.AccessAccepted, "")
log.Info("Shadowsocks: Tunnelling request to ", dest)
ray := this.packetDispatcher.DispatchToOutbound(dest)
defer ray.InboundOutput().Release()
var writeFinish sync.Mutex
writeFinish.Lock()
go func() {
if payload, err := ray.InboundOutput().Read(); err == nil {
payload.SliceBack(ivLen)
rand.Read(payload.Value[:ivLen])
stream, err := this.config.Cipher.NewEncodingStream(key, payload.Value[:ivLen])
if err != nil {
log.Error("Shadowsocks: Failed to create encoding stream: ", err)
return
}
stream.XORKeyStream(payload.Value[ivLen:], payload.Value[ivLen:])
conn.Write(payload.Value)
payload.Release()
writer := crypto.NewCryptionWriter(stream, conn)
v2writer := v2io.NewAdaptiveWriter(writer)
v2io.Pipe(ray.InboundOutput(), v2writer)
writer.Release()
v2writer.Release()
}
writeFinish.Unlock()
}()
var payloadReader v2io.Reader
if request.OTA {
payloadAuth := NewAuthenticator(ChunkKeyGenerator(iv))
payloadReader = NewChunkReader(reader, payloadAuth)
} else {
payloadReader = v2io.NewAdaptiveReader(reader)
}
v2io.Pipe(payloadReader, ray.InboundInput())
ray.InboundInput().Close()
payloadReader.Release()
writeFinish.Lock()
}
开发者ID:xiaomotou,项目名称:v2ray-core,代码行数:93,代码来源:server.go
示例13: HandleConnection
func (server *SocksServer) HandleConnection(connection net.Conn) error {
defer connection.Close()
reader := v2net.NewTimeOutReader(4, connection)
auth, auth4, err := protocol.ReadAuthentication(reader)
if err != nil && err != protocol.ErrorSocksVersion4 {
log.Error("Error on reading authentication: %v", err)
return err
}
var dest v2net.Destination
// TODO refactor this part
if err == protocol.ErrorSocksVersion4 {
result := protocol.Socks4RequestGranted
if auth4.Command == protocol.CmdBind {
result = protocol.Socks4RequestRejected
}
socks4Response := protocol.NewSocks4AuthenticationResponse(result, auth4.Port, auth4.IP[:])
protocol.WriteSocks4AuthenticationResponse(connection, socks4Response)
if result == protocol.Socks4RequestRejected {
return ErrorCommandNotSupported
}
dest = v2net.NewTCPDestination(v2net.IPAddress(auth4.IP[:], auth4.Port))
} else {
expectedAuthMethod := protocol.AuthNotRequired
if server.config.AuthMethod == JsonAuthMethodUserPass {
expectedAuthMethod = protocol.AuthUserPass
}
if !auth.HasAuthMethod(expectedAuthMethod) {
authResponse := protocol.NewAuthenticationResponse(protocol.AuthNoMatchingMethod)
err = protocol.WriteAuthentication(connection, authResponse)
if err != nil {
log.Error("Error on socksio write authentication: %v", err)
return err
}
log.Warning("Client doesn't support allowed any auth methods.")
return ErrorAuthenticationFailed
}
authResponse := protocol.NewAuthenticationResponse(expectedAuthMethod)
err = protocol.WriteAuthentication(connection, authResponse)
if err != nil {
log.Error("Error on socksio write authentication: %v", err)
return err
}
if server.config.AuthMethod == JsonAuthMethodUserPass {
upRequest, err := protocol.ReadUserPassRequest(reader)
if err != nil {
log.Error("Failed to read username and password: %v", err)
return err
}
status := byte(0)
if !upRequest.IsValid(server.config.Username, server.config.Password) {
status = byte(0xFF)
}
upResponse := protocol.NewSocks5UserPassResponse(status)
err = protocol.WriteUserPassResponse(connection, upResponse)
if err != nil {
log.Error("Error on socksio write user pass response: %v", err)
return err
}
if status != byte(0) {
return ErrorInvalidUser
}
}
request, err := protocol.ReadRequest(reader)
if err != nil {
log.Error("Error on reading socks request: %v", err)
return err
}
response := protocol.NewSocks5Response()
if request.Command == protocol.CmdBind || request.Command == protocol.CmdUdpAssociate {
response := protocol.NewSocks5Response()
response.Error = protocol.ErrorCommandNotSupported
err = protocol.WriteResponse(connection, response)
if err != nil {
log.Error("Error on socksio write response: %v", err)
return err
}
log.Warning("Unsupported socks command %d", request.Command)
return ErrorCommandNotSupported
}
response.Error = protocol.ErrorSuccess
response.Port = request.Port
response.AddrType = request.AddrType
switch response.AddrType {
case protocol.AddrTypeIPv4:
copy(response.IPv4[:], request.IPv4[:])
case protocol.AddrTypeIPv6:
copy(response.IPv6[:], request.IPv6[:])
case protocol.AddrTypeDomain:
//.........这里部分代码省略.........
开发者ID:xcxv,项目名称:v2ray-core,代码行数:101,代码来源:socks.go
示例14: handleConnection
func (this *Shadowsocks) handleConnection(conn *hub.TCPConn) {
defer conn.Close()
buffer := alloc.NewSmallBuffer()
defer buffer.Release()
timedReader := v2net.NewTimeOutReader(16, conn)
_, err := io.ReadFull(timedReader, buffer.Value[:this.config.Cipher.IVSize()])
if err != nil {
log.Access(conn.RemoteAddr(), serial.StringLiteral(""), log.AccessRejected, serial.StringLiteral(err.Error()))
log.Error("Shadowsocks: Failed to read IV: ", err)
return
}
iv := buffer.Value[:this.config.Cipher.IVSize()]
key := this.config.Key
reader, err := this.config.Cipher.NewDecodingStream(key, iv, timedReader)
if err != nil {
log.Error("Shadowsocks: Failed to create decoding stream: ", err)
return
}
request, err := ReadRequest(reader, NewAuthenticator(HeaderKeyGenerator(iv, key)), false)
if err != nil {
log.Access(conn.RemoteAddr(), serial.StringLiteral(""), log.AccessRejected, serial.StringLiteral(err.Error()))
log.Warning("Shadowsocks: Invalid request from ", conn.RemoteAddr(), ": ", err)
return
}
userSettings := protocol.GetUserSettings(this.config.Level)
timedReader.SetTimeOut(userSettings.PayloadReadTimeout)
dest := v2net.TCPDestination(request.Address, request.Port)
log.Access(conn.RemoteAddr(), dest, log.AccessAccepted, serial.StringLiteral(""))
log.Info("Shadowsocks: Tunnelling request to ", dest)
packet := v2net.NewPacket(dest, nil, true)
ray := this.packetDispatcher.DispatchToOutbound(packet)
var writeFinish sync.Mutex
writeFinish.Lock()
go func() {
if payload, ok := <-ray.InboundOutput(); ok {
payload.SliceBack(16)
rand.Read(payload.Value[:16])
writer, err := this.config.Cipher.NewEncodingStream(key, payload.Value[:16], conn)
if err != nil {
log.Error("Shadowsocks: Failed to create encoding stream: ", err)
return
}
writer.Write(payload.Value)
payload.Release()
v2io.ChanToRawWriter(writer, ray.InboundOutput())
}
writeFinish.Unlock()
}()
var payloadReader v2io.Reader
if request.OTA {
payloadAuth := NewAuthenticator(ChunkKeyGenerator(iv))
payloadReader = NewChunkReader(reader, payloadAuth)
} else {
payloadReader = v2io.NewAdaptiveReader(reader)
}
v2io.ReaderToChan(ray.InboundInput(), payloadReader)
close(ray.InboundInput())
writeFinish.Lock()
}
开发者ID:jim1568cas,项目名称:v2ray-core,代码行数:74,代码来源:shadowsocks.go
示例15: HandleConnection
func (this *VMessInboundHandler) HandleConnection(connection *hub.TCPConn) {
defer connection.Close()
connReader := v2net.NewTimeOutReader(16, connection)
reader := v2io.NewBufferedReader(connReader)
session := raw.NewServerSession(this.clients)
request, err := session.DecodeRequestHeader(reader)
if err != nil {
log.Access(connection.RemoteAddr(), serial.StringLiteral(""), log.AccessRejected, serial.StringLiteral(err.Error()))
log.Warning("VMessIn: Invalid request from ", connection.RemoteAddr(), ": ", err)
return
}
log.Access(connection.RemoteAddr(), request.Destination(), log.AccessAccepted, serial.StringLiteral(""))
log.Debug("VMessIn: Received request for ", request.Destination())
ray := this.packetDispatcher.DispatchToOutbound(v2net.NewPacket(request.Destination(), nil, true))
input := ray.InboundInput()
output := ray.InboundOutput()
var readFinish, writeFinish sync.Mutex
readFinish.Lock()
writeFinish.Lock()
userSettings := proto.GetUserSettings(request.User.Level)
connReader.SetTimeOut(userSettings.PayloadReadTimeout)
reader.SetCached(false)
go func() {
defer close(input)
defer readFinish.Unlock()
bodyReader := session.DecodeRequestBody(reader)
var requestReader v2io.Reader
if request.Option.IsChunkStream() {
requestReader = vmessio.NewAuthChunkReader(bodyReader)
} else {
requestReader = v2io.NewAdaptiveReader(bodyReader)
}
v2io.ReaderToChan(input, requestReader)
}()
writer := v2io.NewBufferedWriter(connection)
response := &proto.ResponseHeader{
Command: this.generateCommand(request),
}
session.EncodeResponseHeader(response, writer)
bodyWriter := session.EncodeResponseBody(writer)
// Optimize for small response packet
if data, open := <-output; open {
if request.Option.IsChunkStream() {
vmessio.Authenticate(data)
}
bodyWriter.Write(data.Value)
data.Release()
writer.SetCached(false)
go func(finish *sync.Mutex) {
var writer v2io.Writer = v2io.NewAdaptiveWriter(bodyWriter)
if request.Option.IsChunkStream() {
writer = vmessio.NewAuthChunkWriter(writer)
}
v2io.ChanToWriter(writer, output)
finish.Unlock()
}(&writeFinish)
writeFinish.Lock()
}
connection.CloseWrite()
readFinish.Lock()
}
开发者ID:caizixian,项目名称:v2ray-core,代码行数:73,代码来源:inbound.go
示例16: HandleConnection
func (this *VMessInboundHandler) HandleConnection(connection *hub.TCPConn) {
defer connection.Close()
connReader := v2net.NewTimeOutReader(16, connection)
requestReader := protocol.NewVMessRequestReader(this.clients)
request, err := requestReader.Read(connReader)
if err != nil {
log.Access(connection.RemoteAddr(), serial.StringLiteral(""), log.AccessRejected, serial.StringLiteral(err.Error()))
log.Warning("VMessIn: Invalid request from ", connection.RemoteAddr(), ": ", err)
return
}
log.Access(connection.RemoteAddr(), request.Address, log.AccessAccepted, serial.StringLiteral(""))
log.Debug("VMessIn: Received request for ", request.Address)
ray := this.packetDispatcher.DispatchToOutbound(v2net.NewPacket(request.Destination(), nil, true))
input := ray.InboundInput()
output := ray.InboundOutput()
var readFinish, writeFinish sync.Mutex
readFinish.Lock()
writeFinish.Lock()
userSettings := vmess.GetUserSettings(request.User.Level)
connReader.SetTimeOut(userSettings.PayloadReadTimeout)
go handleInput(request, connReader, input, &readFinish)
responseKey := md5.Sum(request.RequestKey)
responseIV := md5.Sum(request.RequestIV)
aesStream, err := v2crypto.NewAesEncryptionStream(responseKey[:], responseIV[:])
if err != nil {
log.Error("VMessIn: Failed to create AES decryption stream: ", err)
close(input)
return
}
responseWriter := v2crypto.NewCryptionWriter(aesStream, connection)
// Optimize for small response packet
buffer := alloc.NewLargeBuffer().Clear()
defer buffer.Release()
buffer.AppendBytes(request.ResponseHeader, byte(0))
this.generateCommand(buffer)
if data, open := <-output; open {
if request.IsChunkStream() {
vmessio.Authenticate(data)
}
buffer.Append(data.Value)
data.Release()
responseWriter.Write(buffer.Value)
go func(finish *sync.Mutex) {
var writer v2io.Writer
writer = v2io.NewAdaptiveWriter(responseWriter)
if request.IsChunkStream() {
writer = vmessio.NewAuthChunkWriter(writer)
}
v2io.ChanToWriter(writer, output)
finish.Unlock()
}(&writeFinish)
writeFinish.Lock()
}
connection.CloseWrite()
readFinish.Lock()
}
开发者ID:earthGavinLee,项目名称:v2ray-core,代码行数:66,代码来源:inbound.go
示例17: HandleConnection
func (this *VMessInboundHandler) HandleConnection(connection internet.Connection) {
defer connection.Close()
if !this.accepting {
return
}
connReader := v2net.NewTimeOutReader(8, connection)
defer connReader.Release()
reader := v2io.NewBufferedReader(connReader)
defer reader.Release()
this.RLock()
if !this.accepting {
this.RUnlock()
return
}
session := raw.NewServerSession(this.clients)
defer session.Release()
request, err := session.DecodeRequestHeader(reader)
this.RUnlock()
if err != nil {
if err != io.EOF {
log.Access(connection.RemoteAddr(), "", log.AccessRejected, err)
log.Warning("VMessIn: Invalid request from ", connection.RemoteAddr(), ": ", err)
}
connection.SetReusable(false)
return
}
log.Access(connection.RemoteAddr(), request.Destination(), log.AccessAccepted, "")
log.Info("VMessIn: Received request for ", request.Destination())
connection.SetReusable(request.Option.Has(protocol.RequestOptionConnectionReuse))
ray := this.packetDispatcher.DispatchToOutbound(request.Destination())
input := ray.InboundInput()
output := ray.InboundOutput()
defer input.Close()
defer output.Release()
var readFinish sync.Mutex
readFinish.Lock()
userSettings := protocol.GetUserSettings(request.User.Level)
connReader.SetTimeOut(userSettings.PayloadReadTimeout)
reader.SetCached(false)
go func() {
bodyReader := session.DecodeRequestBody(reader)
var requestReader v2io.Reader
if request.Option.Has(protocol.RequestOptionChunkStream) {
requestReader = vmessio.NewAuthChunkReader(bodyReader)
} else {
requestReader = v2io.NewAdaptiveReader(bodyReader)
}
err := v2io.Pipe(requestReader, input)
if err != io.EOF {
connection.SetReusable(false)
}
requestReader.Release()
input.Close()
readFinish.Unlock()
}()
writer := v2io.NewBufferedWriter(connection)
defer writer.Release()
response := &protocol.ResponseHeader{
Command: this.generateCommand(request),
}
if connection.Reusable() {
response.Option.Set(protocol.ResponseOptionConnectionReuse)
}
session.EncodeResponseHeader(response, writer)
bodyWriter := session.EncodeResponseBody(writer)
var v2writer v2io.Writer = v2io.NewAdaptiveWriter(bodyWriter)
if request.Option.Has(protocol.RequestOptionChunkStream) {
v2writer = vmessio.NewAuthChunkWriter(v2writer)
}
// Optimize for small response packet
if data, err := output.Read(); err == nil {
if err := v2writer.Write(data); err != nil {
connection.SetReusable(false)
}
writer.SetCached(false)
err = v2io.Pipe(output, v2writer)
if err != io.EOF {
connection.SetReusable(false)
}
//.........这里部分代码省略.........
开发者ID:yueyingjuesha,项目名称:v2ray-core,代码行数:101,代码来源:inbound.go
示例18: Dispatch
func (this *FreedomConnection) Dispatch(destination v2net.Destination, payload *alloc.Buffer, ray ray.OutboundRay) error {
log.Info("Freedom: Opening connection to ", destination)
defer payload.Release()
defer ray.OutboundInput().Release()
defer ray.OutboundOutput().Close()
var conn internet.Connection
if this.domainStrategy == DomainStrategyUseIP && destination.Address().IsDomain() {
destination = this.ResolveIP(destination)
}
err := retry.Timed(5, 100).On(func() error {
rawConn, err := internet.Dial(this.meta.Address, destination, this.meta.StreamSettings)
if err != nil {
return err
}
conn = rawConn
return nil
})
if err != nil {
log.Warning("Freedom: Failed to open connection to ", destination, ": ", err)
return err
}
defer conn.Close()
input := ray.OutboundInput()
output := ray.OutboundOutput()
var readMutex, writeMutex sync.Mutex
readMutex.Lock()
writeMutex.Lock()
conn.Write(payload.Value)
go func() {
v2writer := v2io.NewAdaptiveWriter(conn)
defer v2writer.Release()
v2io.Pipe(input, v2writer)
writeMutex.Unlock()
}()
go func() {
defer readMutex.Unlock()
var reader io.Reader = conn
timeout := this.timeout
if destination.IsUDP() {
timeout = 16
}
if timeout > 0 {
reader = v2net.NewTimeOutReader(int(timeout) /* seconds */, conn)
}
v2reader := v2io.NewAdaptiveReader(reader)
defer v2reader.Release()
v2io.Pipe(v2reader, output)
ray.OutboundOutput().Close()
}()
writeMutex.Lock()
if tcpConn, ok := conn.(*tcp.RawConnection); ok {
tcpConn.CloseWrite()
}
readMutex.Lock()
return nil
}
开发者ID:ChoyesYan,项目名称:v2ray-core,代码行数:69,代码来源:freedom.go
注:本文中的github.com/v2ray/v2ray-core/common/net.NewTimeOutReader函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论