Golang pqueue.PQueue类代码示例

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Golang中github.com/vburenin/firempq/pqueue.PQueue类的典型用法代码示例。如果您正苦于以下问题：Golang PQueue类的具体用法？Golang PQueue怎么用？Golang PQueue使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。

在下文中一共展示了PQueue类的8个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Golang代码示例。

示例1: ReceiveMessage

func ReceiveMessage(pq *pqueue.PQueue, sqsQuery *urlutils.SQSQuery) sqs_response.SQSResponse {
	pqCfg := pq.Config()
	opts := &ReceiveMessageOptions{
		WaitTimeSeconds:     pqCfg.PopWaitTimeout,
		VisibilityTimeout:   pqCfg.PopLockTimeout,
		MaxNumberOfMessages: 1,
		Attributes:          nil,
		MessageAttributes:   nil,
	}

	paramsLen := len(sqsQuery.ParamsList) - 1
	for i := 0; i < paramsLen; i += 2 {
		err := opts.Parse(sqsQuery.ParamsList[i], sqsQuery.ParamsList[i+1])
		if err != nil {
			return err
		}
	}
	// All messages received from SQS must be locked.
	res := pq.Pop(opts.VisibilityTimeout, opts.WaitTimeSeconds, opts.MaxNumberOfMessages, true)
	if res.IsError() {
		e, _ := res.(error)
		return sqserr.InvalidParameterValueError(e.Error())
	}

	m, _ := res.(*resp.MessagesResponse)
	items := m.GetItems()

	output := &ReceiveMessageResponse{}
	for _, item := range items {
		if msgResp := MakeMessageResponse(item, opts, sqsQuery); msgResp != nil {
			output.Message = append(output.Message, msgResp)
		}
	}
	return output
}

开发者ID:vburenin，项目名称:firempq，代码行数:35，代码来源:receive_message.go

示例2: ChangeMessageVisibility

func ChangeMessageVisibility(pq *pqueue.PQueue, sqsQuery *urlutils.SQSQuery) sqs_response.SQSResponse {
	var receipt string
	var visibilityTimeout int64 = -1
	paramsLen := len(sqsQuery.ParamsList) - 1

	for i := 0; i < paramsLen; i += 2 {
		switch sqsQuery.ParamsList[i] {
		case "ReceiptHandle":
			receipt = sqsQuery.ParamsList[i+1]
		case "VisibilityTimeout":
			v, err := strconv.ParseInt(sqsQuery.ParamsList[i+1], 10, 0)
			if err != nil || v < 0 {
				return sqserr.MalformedInputError("VisibilityTimeout must be a positive integer value")
			}
			visibilityTimeout = v * 1000
		}
	}

	if receipt == "" {
		return sqserr.MissingParameterError("The request must contain the parameter ReceiptHandle.")
	}

	if visibilityTimeout < 0 {
		return sqserr.MissingParameterError("The request must contain the parameter VisibilityTimeout.")
	}

	resp := pq.UpdateLockByRcpt(receipt, visibilityTimeout)
	if resp == mpqerr.ERR_INVALID_RECEIPT {
		return sqserr.InvalidReceiptHandleError("The input receipt handle is not a valid receipt handle.")
	}

	return &ChangeMessageVisibilityResponse{
		RequestId: "cvtreq",
	}
}

开发者ID:vburenin，项目名称:firempq，代码行数:35，代码来源:change_message_visibility.go

示例3: ChangeMessageVisibilityBatch

func ChangeMessageVisibilityBatch(pq *pqueue.PQueue, sqsQuery *urlutils.SQSQuery) sqs_response.SQSResponse {
	attrs, _ := urlutils.ParseNNotationAttr(
		"ChangeMessageVisibilityBatchRequestEntry.", sqsQuery.ParamsList,
		nil, NewVisibilityBatchParams)
	attrsLen := len(attrs)

	checker, err := validation.NewBatchIdValidation(attrsLen)
	if err != nil {
		return err
	}

	attrList := make([]*VisibilityBatchParams, 0, attrsLen)

	for i := 1; i <= attrsLen; i++ {
		a, ok := attrs[i]
		if !ok {
			return sqserr.MissingParameterError("The request is missing sequence %d", i)
		}
		p, _ := a.(*VisibilityBatchParams)
		if err = checker.Validate(p.Id); err != nil {
			return err
		}
		attrList = append(attrList, p)
	}

	output := &ChangeMessageVisibilityBatchResponse{
		RequestId: "visibilitybatch",
	}

	for _, batchItem := range attrList {
		resp := pq.UpdateLockByRcpt(batchItem.ReceiptHandle, batchItem.VisibilityTimeout)
		if resp == mpqerr.ERR_INVALID_RECEIPT {
			e := sqserr.InvalidReceiptHandleError("The input receipt handle is not a valid receipt handle.")
			output.ErrorEntry = append(output.ErrorEntry, e.BatchResult(batchItem.Id))
		} else {
			output.ResultEntry = append(output.ResultEntry, &OkChange{Id: batchItem.Id})
		}
	}
	return output
}

开发者ID:vburenin，项目名称:firempq，代码行数:40，代码来源:change_message_visibility_batch.go

示例4: DeleteMessage

func DeleteMessage(pq *pqueue.PQueue, sqsQuery *urlutils.SQSQuery) sqs_response.SQSResponse {
	var receipt string
	paramsLen := len(sqsQuery.ParamsList) - 1

	for i := 0; i < paramsLen; i += 2 {
		if sqsQuery.ParamsList[i] == "ReceiptHandle" {
			receipt = sqsQuery.ParamsList[i+1]
		}
	}

	if receipt == "" {
		return sqserr.MissingParameterError("The request must contain the parameter ReceiptHandle.")
	}

	resp := pq.DeleteByReceipt(receipt)
	if resp == mpqerr.ERR_INVALID_RECEIPT {
		return sqserr.InvalidReceiptHandleError("The input receipt handle is not a valid receipt handle.")
	}

	return &DeleteMessageResponse{
		RequestId: "delreq",
	}
}

开发者ID:vburenin，项目名称:firempq，代码行数:23，代码来源:delete_message.go

示例5: PurgeQueue

func PurgeQueue(pq *pqueue.PQueue, sqsQuery *urlutils.SQSQuery) sqs_response.SQSResponse {
	pq.Clear()
	return &PurgeQueueResponse{
		RequestId: "purgeid",
	}
}

开发者ID:vburenin，项目名称:firempq，代码行数:6，代码来源:purge_queue.go

示例6: SetQueueAttributes

func SetQueueAttributes(pq *pqueue.PQueue, sqsQuery *urlutils.SQSQuery) sqs_response.SQSResponse {
	attrs, err := urlutils.ParseNNotationAttr("MessageAttribute.", sqsQuery.ParamsList, nil, NewAttribute)
	if err != nil {
		return err
	}

	attrsLen := len(attrs)

	params := &pqueue.PQueueParams{}

	for i := 1; i < attrsLen; i++ {
		a, ok := attrs[i]
		if !ok {
			return sqserr.InvalidParameterValueError("The request must contain non-empty message attribute name.")
		}
		attr, _ := a.(*Attribute)
		err = nil
		switch attr.Name {
		case "DelaySeconds":
			if v, e := strconv.ParseInt(attr.Value, 10, 0); e == nil {
				v := v * 1000
				if v >= 0 && v <= conf.CFG_PQ.MaxDeliveryDelay {
					params.DeliveryDelay = &v
					continue
				}
			}
			return sqserr.InvalidAttributeValueError(AttrErrText, attr.Name)
		case "MaximumMessageSize":
			if v, e := strconv.ParseInt(attr.Value, 10, 0); e == nil {
				if v >= 1024 && v <= conf.CFG_PQ.MaxMessageSize {
					params.MaxMsgSize = &v
					continue
				}
			}
			return sqserr.InvalidAttributeValueError(AttrErrText, attr.Name)
		case "MessageRetentionPeriod":
			if v, e := strconv.ParseInt(attr.Value, 10, 0); e == nil {
				if v >= 60 && v <= 1209600 {
					v := v * 1000
					params.MsgTTL = &v
					continue
				}
			}
			return sqserr.InvalidAttributeValueError(AttrErrText, attr.Name)
		case "ReceiveMessageWaitTimeSeconds":
			if v, e := strconv.ParseInt(attr.Value, 10, 0); e == nil {
				v := v * 1000
				if v >= 60000 && v <= conf.CFG_PQ.MaxPopWaitTimeout {
					params.PopWaitTimeout = &v
					continue
				}
			}
			return sqserr.InvalidAttributeValueError(AttrErrText, attr.Name)
		case "VisibilityTimeout":
			if v, e := strconv.ParseInt(attr.Value, 10, 0); e == nil {
				v := v * 1000
				if v > 0 && v <= conf.CFG_PQ.MaxLockTimeout {
					params.PopLockTimeout = &v
					continue
				}
			}
			return sqserr.InvalidAttributeValueError(AttrErrText, attr.Name)
		// These parameters are just ignored.
		case "Policy":
		case "ApproximateNumberOfMessages":
		case "ApproximateNumberOfMessagesDelayed":
		case "ApproximateNumberOfMessagesNotVisible":
		case "CreatedTimestamp":
		case "LastModifiedTimestamp":
		case "QueueArn":
		// Any unexpected attribute will produce unexpected attribute error.
		default:
			return sqserr.InvalidAttributeNameError("Unknown Attribute: %s", attr.Name)
		}
	}

	pq.SetParams(params)
	return &SetQueueAttributesResponse{
		RequestId: "req",
	}
}

开发者ID:vburenin，项目名称:firempq，代码行数:81，代码来源:set_queue_attributes.go

示例7: PushAMessage

func PushAMessage(pq *pqueue.PQueue, senderId string, paramList []string) sqs_response.SQSResponse {
	out := &MessageParams{
		DelaySeconds: -1,
		MessageBody:  "",
	}
	attrs, err := urlutils.ParseNNotationAttr("MessageAttribute.", paramList, out.Parse, NewReqQueueAttr)
	if err != nil {
		return err
	}
	attrsLen := len(attrs)
	outAttrs := make(map[string]*sqsmsg.UserAttribute)

	for i := 1; i <= attrsLen; i++ {
		a, ok := attrs[i]
		if !ok {
			return sqserr.InvalidParameterValueError("The request must contain non-empty message attribute name.")
		}
		reqMsgAttr, _ := a.(*ReqMsgAttr)

		sqs_err := validation.ValidateMessageAttrName(reqMsgAttr.Name)
		if sqs_err != nil {
			return sqs_err
		}

		sqs_err = validation.ValidateMessageAttrName(reqMsgAttr.DataType)
		if sqs_err != nil {
			return sqs_err
		}

		if reqMsgAttr.BinaryValue != "" && reqMsgAttr.StringValue != "" {
			return sqserr.InvalidParameterValueError(
				"Message attribute name '%s' has multiple values.", reqMsgAttr.Name)
		}

		if _, ok := outAttrs[reqMsgAttr.Name]; ok {
			return sqserr.InvalidParameterValueError(
				"Message attribute name '%s' already exists.", reqMsgAttr.Name)
		}

		if strings.HasPrefix(reqMsgAttr.DataType, "Number") {
			if _, err := strconv.Atoi(reqMsgAttr.StringValue); err != nil {
				return sqserr.InvalidParameterValueError(
					"Could not cast message attribute '%s' value to number.", reqMsgAttr.Name)
			}
		}

		if reqMsgAttr.BinaryValue != "" {
			if reqMsgAttr.DataType != "Binary" {
				return sqserr.InvalidParameterValueError(
					"The message attribute '%s' with type 'Binary' must use field 'Binary'", reqMsgAttr.Name)
			}
			outAttrs[reqMsgAttr.Name] = &sqsmsg.UserAttribute{
				Type:  reqMsgAttr.DataType,
				Value: reqMsgAttr.BinaryValue,
			}
			continue
		}

		if reqMsgAttr.StringValue != "" {
			if reqMsgAttr.DataType != "String" && reqMsgAttr.DataType != "Number" {
				return sqserr.InvalidParameterValueError(
					"The message attribute '%s' with type 'String' must use field 'String'", reqMsgAttr.Name)
			}
			outAttrs[reqMsgAttr.Name] = &sqsmsg.UserAttribute{
				Type:  reqMsgAttr.DataType,
				Value: reqMsgAttr.StringValue,
			}
		}
	}

	msgId := IdGen.RandId()
	if out.DelaySeconds < 0 {
		out.DelaySeconds = pq.Config().DeliveryDelay
	} else if out.DelaySeconds > conf.CFG_PQ.MaxDeliveryDelay {
		return sqserr.InvalidParameterValueError(
			"Delay secods must be between 0 and %d", conf.CFG_PQ.MaxDeliveryDelay/1000)
	}
	bodyMd5str := fmt.Sprintf("%x", md5.Sum(enc.UnsafeStringToBytes(out.MessageBody)))
	attrMd5 := CalcAttrMd5(outAttrs)

	msgPayload := sqsmsg.SQSMessagePayload{
		UserAttributes:         outAttrs,
		MD5OfMessageBody:       bodyMd5str,
		MD5OfMessageAttributes: attrMd5,
		SenderId:               senderId,
		SentTimestamp:          strconv.FormatInt(utils.Uts(), 10),
		Payload:                out.MessageBody,
	}

	d, marshalErr := msgPayload.Marshal()
	if marshalErr != nil {
		log.Error("Failed to serialize message payload: %v", err)
	}
	payload := enc.UnsafeBytesToString(d)

	resp := pq.Push(msgId, payload, pq.Config().MsgTtl, out.DelaySeconds, 1)
	if resp.IsError() {
		e, _ := resp.(error)
		return sqserr.InvalidParameterValueError(e.Error())
	}
//.........这里部分代码省略.........

开发者ID:vburenin，项目名称:firempq，代码行数:101，代码来源:send_message.go

示例8: GetQueueAttributes

func GetQueueAttributes(pq *pqueue.PQueue, sqsQuery *urlutils.SQSQuery) sqs_response.SQSResponse {
	paramsLen := len(sqsQuery.ParamsList) - 1

	pqCfg := pq.Config()
	pqDesc := pq.Description()

	resp := &GetQueueAttributesResponse{
		RequestId: "reqId",
	}

	for i := 0; i < paramsLen; i += 2 {
		allAttr := false
		if strings.HasPrefix(sqsQuery.ParamsList[i], "AttributeName") {
			attrName := sqsQuery.ParamsList[i+1]
			if attrName == AttrAll {
				allAttr = true
				resp.Attributes = make([]*QAttr, 0, 13) // 13 total attributes
			}

			if allAttr || attrName == AttrApproximateNumberOfMessages {
				resp.Attributes = append(resp.Attributes, &QAttr{
					Name:  AttrApproximateNumberOfMessages,
					Value: pq.AvailableMessages(),
				})
			}

			if allAttr || attrName == AttrApproximateNumberOfMessagesNotVisible {
				resp.Attributes = append(resp.Attributes, &QAttr{
					Name:  AttrApproximateNumberOfMessagesNotVisible,
					Value: pq.LockedCount(),
				})
			}

			if allAttr || attrName == AttrVisibilityTimeout {
				resp.Attributes = append(resp.Attributes, &QAttr{
					Name:  AttrVisibilityTimeout,
					Value: pqCfg.PopLockTimeout / 1000,
				})
			}

			if allAttr || attrName == AttrCreatedTimestamp {
				resp.Attributes = append(resp.Attributes, &QAttr{
					Name:  AttrCreatedTimestamp,
					Value: pqDesc.CreateTs / 1000,
				})
			}

			if allAttr || attrName == AttrLastModifiedTimestamp {
				resp.Attributes = append(resp.Attributes, &QAttr{
					Name:  AttrLastModifiedTimestamp,
					Value: pqCfg.LastUpdateTs / 1000,
				})
			}

			if allAttr || attrName == AttrMaximumMessageSize {
				resp.Attributes = append(resp.Attributes, &QAttr{
					Name:  AttrMaximumMessageSize,
					Value: pqCfg.MaxMsgSize,
				})
			}

			if allAttr || attrName == AttrMessageRetentionPeriod {
				resp.Attributes = append(resp.Attributes, &QAttr{
					Name:  AttrMessageRetentionPeriod,
					Value: pqCfg.MsgTtl / 1000,
				})
			}

			if allAttr || attrName == AttrQueueArn {
				resp.Attributes = append(resp.Attributes, &QAttr{
					Name:  AttrQueueArn,
					Value: makeQueueArn(pqDesc.Name),
				})
			}

			if allAttr || attrName == AttrApproximateNumberOfMessagesDelayed {
				resp.Attributes = append(resp.Attributes, &QAttr{
					Name:  AttrApproximateNumberOfMessagesDelayed,
					Value: pq.DelayedCount(),
				})
			}

			if allAttr || attrName == AttrDelaySeconds {
				resp.Attributes = append(resp.Attributes, &QAttr{
					Name:  AttrDelaySeconds,
					Value: pqCfg.DeliveryDelay / 1000,
				})
			}

			if allAttr || attrName == AttrReceiveMessageWaitTimeSeconds {
				resp.Attributes = append(resp.Attributes, &QAttr{
					Name:  AttrReceiveMessageWaitTimeSeconds,
					Value: pqCfg.PopWaitTimeout / 1000,
				})
			}

			if allAttr || attrName == AttrRedrivePolicy {
				if pqCfg.PopLimitQueueName != "" {
					resp.Attributes = append(resp.Attributes, &QAttr{
						Name: AttrRedrivePolicy,
//.........这里部分代码省略.........

开发者ID:vburenin，项目名称:firempq，代码行数:101，代码来源:get_queue_attributes.go

注：本文中的github.com/vburenin/firempq/pqueue.PQueue类示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。