Golang netlink.LinkSetUp函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Golang中github.com/vishvananda/netlink.LinkSetUp函数的典型用法代码示例。如果您正苦于以下问题：Golang LinkSetUp函数的具体用法？Golang LinkSetUp怎么用？Golang LinkSetUp使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了LinkSetUp函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Golang代码示例。

示例1: SetupNetwork

/*   SetupNetwork()
 */
func SetupNetwork(addr string) error {
	// Bring up loop back interface.
	lo, e := netlink.LinkByName("lo")
	if e != nil {
		return fmt.Errorf("Failed to find loopback interface: %v", e)
	}

	if e := netlink.LinkSetUp(lo); e != nil {
		return fmt.Errorf("Failed to setup loopback interface: %v", e)
	}

	if len(addr) > 0 {
		veth, e := netlink.LinkByName("veth0")
		if e != nil {
			return fmt.Errorf("Failed to find veth interface: %v", e)
		}

		addr, e := netlink.ParseAddr(addr)
		if e != nil {
			return fmt.Errorf("Failed to parse NetworkAddr: %v", e)
		}

		netlink.AddrAdd(veth, addr)
		if e := netlink.LinkSetUp(veth); e != nil {
			return fmt.Errorf("Network link failed to come up: %v", e)
		}
	}

	return nil
}

开发者ID:tswindell，项目名称:nest-boot，代码行数:32，代码来源:main.go

示例2: SetupVeth

// SetupVeth sets up a virtual ethernet link.
// Should be in container netns.
func SetupVeth(contVethName string, mtu int, hostNS *os.File) (hostVeth, contVeth netlink.Link, err error) {
	var hostVethName string
	hostVethName, contVeth, err = makeVeth(contVethName, mtu)
	if err != nil {
		return
	}

	if err = netlink.LinkSetUp(contVeth); err != nil {
		err = fmt.Errorf("failed to set %q up: %v", contVethName, err)
		return
	}

	hostVeth, err = netlink.LinkByName(hostVethName)
	if err != nil {
		err = fmt.Errorf("failed to lookup %q: %v", hostVethName, err)
		return
	}

	if err = netlink.LinkSetUp(hostVeth); err != nil {
		err = fmt.Errorf("failed to set %q up: %v", contVethName, err)
		return
	}

	if err = netlink.LinkSetNsFd(hostVeth, int(hostNS.Fd())); err != nil {
		err = fmt.Errorf("failed to move veth to host netns: %v", err)
		return
	}

	return
}

开发者ID:NeilW，项目名称:cni，代码行数:32，代码来源:link.go

示例3: wireTapInterface

// Wire up a tap interface for communicating with the guest. Returns the name
// of the created tap interface.
func wireTapInterface(config *netConfig) string {
	// Drop link on eth0 before configuring anything
	eth0, err := netlink.LinkByName("eth0")
	if err != nil {
		log.Fatalf("LinkByName(eth0): %v", err)
	}
	if err := netlink.LinkSetDown(eth0); err != nil {
		log.Fatalf("LinkSetDown(eth0): %v", err)
	}
	// Flush any L3 addresses on eth0
	if err := flushAddresses(eth0); err != nil {
		log.Fatalf("flushAddresses(eth0): %v", err)
	}
	// Generate and set random MAC address for eth0
	eth0Addr := generateHardwareAddr()
	if err := netlink.LinkSetHardwareAddr(eth0, eth0Addr); err != nil {
		log.Fatalf("LinkSetHardwareAddr(eth0): %v", err)
	}
	// Create "tap0" (interface to guest)
	tap0Attrs := netlink.NewLinkAttrs()
	tap0Attrs.Name = "tap0"
	tap0 := &netlink.Tuntap{tap0Attrs, netlink.TUNTAP_MODE_TAP}
	if err := netlink.LinkAdd(tap0); err != nil {
		log.Fatalf("LinkAdd(tap0): %v", err)
	}
	// Create a new bridge, br0 and add eth0 and tap0 to it
	br0Attrs := netlink.NewLinkAttrs()
	br0Attrs.Name = "br0"
	br0 := &netlink.Bridge{br0Attrs}
	if err := netlink.LinkAdd(br0); err != nil {
		log.Fatalf("LinkAdd(br0): %v", err)
	}
	if err := netlink.LinkSetMaster(eth0, br0); err != nil {
		log.Fatalf("LinkSetMaster(eth0, br0): %v", err)
	}
	if err := netlink.LinkSetMaster(tap0, br0); err != nil {
		log.Fatalf("LinkSetMaster(tap0, br0): %v", err)
	}
	// Set all links up
	if err := netlink.LinkSetUp(tap0); err != nil {
		log.Fatalf("LinkSetUp(tap0): %v", err)
	}
	if err := netlink.LinkSetUp(eth0); err != nil {
		log.Fatalf("LinkSetUp(eth0): %v", err)
	}
	if err := netlink.LinkSetUp(br0); err != nil {
		log.Fatalf("LinkSetUp(br0): %v", err)
	}
	return tap0Attrs.Name
}

开发者ID:sjfloat，项目名称:docker-unikernel-runner，代码行数:52，代码来源:host.go

示例4: routingUp

func routingUp() {
	veth, err := netlink.LinkByName("myveth1")
	if err != nil {
		panic(err)
	}

	err = netlink.LinkSetUp(veth)
	if err != nil {
		panic(err)
	}

	addr, _ := netlink.ParseAddr("172.19.80.2/24")
	err = netlink.AddrAdd(veth, addr)
	if err != nil {
		panic(err)
	}

	routes := createRoutes(veth)

	for _, route := range routes {
		fmt.Println("Adding route", route)
		err := netlink.RouteAdd(route)
		if err != nil {
			fmt.Println(err)
			// panic(err)
		}
	}
}

开发者ID:mycroft，项目名称:go-snippets，代码行数:28，代码来源:main.go

示例5: endpointCreate

func endpointCreate() {
	hostIfName := "myveth0"
	containerIfName := "myveth1"

	veth, err := netlink.LinkByName("myveth0")
	if err == nil && veth != nil {
		return
	}

	veth = &netlink.Veth{
		LinkAttrs: netlink.LinkAttrs{Name: hostIfName, TxQLen: 0},
		PeerName:  containerIfName}

	if err := netlink.LinkAdd(veth); err != nil {
		panic(err)
	}

	la := netlink.NewLinkAttrs()
	la.Name = "mycbridge"
	mybridge := &netlink.Bridge{la}

	err = netlink.LinkSetMaster(veth, mybridge)
	if err != nil {
		panic(err)
	}

	err = netlink.LinkSetUp(veth)
	if err != nil {
		panic(err)
	}
}

开发者ID:mycroft，项目名称:go-snippets，代码行数:31，代码来源:main.go

示例6: configureIface

func configureIface(ifname string, ipn ip.IP4Net, mtu int) error {
	iface, err := netlink.LinkByName(ifname)
	if err != nil {
		return fmt.Errorf("failed to lookup interface %v", ifname)
	}

	err = netlink.AddrAdd(iface, &netlink.Addr{IPNet: ipn.ToIPNet(), Label: ""})
	if err != nil {
		return fmt.Errorf("failed to add IP address %v to %v: %v", ipn.String(), ifname, err)
	}

	err = netlink.LinkSetMTU(iface, mtu)
	if err != nil {
		return fmt.Errorf("failed to set MTU for %v: %v", ifname, err)
	}

	err = netlink.LinkSetUp(iface)
	if err != nil {
		return fmt.Errorf("failed to set interface %v to UP state: %v", ifname, err)
	}

	// explicitly add a route since there might be a route for a subnet already
	// installed by Docker and then it won't get auto added
	err = netlink.RouteAdd(&netlink.Route{
		LinkIndex: iface.Attrs().Index,
		Scope:     netlink.SCOPE_UNIVERSE,
		Dst:       ipn.Network().ToIPNet(),
	})
	if err != nil && err != syscall.EEXIST {
		return fmt.Errorf("failed to add route (%v -> %v): %v", ipn.Network().String(), ifname, err)
	}

	return nil
}

开发者ID:luxas，项目名称:flannel，代码行数:34，代码来源:network.go

示例7: Join

func (d *Driver) Join(r *dknet.JoinRequest) (*dknet.JoinResponse, error) {
	// create and attach local name to the bridge
	localVethPair := vethPair(truncateID(r.EndpointID))
	if err := netlink.LinkAdd(localVethPair); err != nil {
		log.Errorf("failed to create the veth pair named: [ %v ] error: [ %s ] ", localVethPair, err)
		return nil, err
	}
	// Bring the veth pair up
	err := netlink.LinkSetUp(localVethPair)
	if err != nil {
		log.Warnf("Error enabling  Veth local iface: [ %v ]", localVethPair)
		return nil, err
	}
	bridgeName := d.networks[r.NetworkID].BridgeName
	err = d.addOvsVethPort(bridgeName, localVethPair.Name, 0)
	if err != nil {
		log.Errorf("error attaching veth [ %s ] to bridge [ %s ]", localVethPair.Name, bridgeName)
		return nil, err
	}
	log.Infof("Attached veth [ %s ] to bridge [ %s ]", localVethPair.Name, bridgeName)

	// SrcName gets renamed to DstPrefix + ID on the container iface
	res := &dknet.JoinResponse{
		InterfaceName: dknet.InterfaceName{
			SrcName:   localVethPair.PeerName,
			DstPrefix: containerEthName,
		},
		Gateway: d.networks[r.NetworkID].Gateway,
	}
	log.Debugf("Join endpoint %s:%s to %s", r.NetworkID, r.EndpointID, r.SandboxKey)
	return res, nil
}

开发者ID:zhuchance，项目名称:docker-ovs-plugin，代码行数:32，代码来源:driver.go

示例8: addUplink

// addUplink adds a dummy uplink to ofnet agent
func addUplink(ofa *OfnetAgent, linkName string, ofpPortNo uint32) (*netlink.Veth, error) {
	link := &netlink.Veth{
		LinkAttrs: netlink.LinkAttrs{
			Name:   linkName,
			TxQLen: 100,
			MTU:    1400,
		},
		PeerName: linkName + "peer",
	}
	// delete old link if it exists.. and ignore error
	netlink.LinkDel(link)
	time.Sleep(100 * time.Millisecond)

	if err := netlink.LinkAdd(link); err != nil {
		return nil, err
	}

	// add it to ofnet
	err := ofa.AddUplink(ofpPortNo, linkName)
	if err != nil {
		return nil, err
	}
	time.Sleep(time.Second)

	// mark the link as up
	if err := netlink.LinkSetUp(link); err != nil {
		return nil, err
	}

	return link, nil
}

开发者ID:jojimt，项目名称:ofnet，代码行数:32，代码来源:ofnet_arp_test.go

示例9: configureIface

// ConfigureIface takes the result of IPAM plugin and
// applies to the ifName interface
func configureIface(conf *NetConf) error {
	ifName := conf.IfName
	link, err := netlink.LinkByName(ifName)
	if err != nil {
		return fmt.Errorf("failed to lookup %q: %v", ifName, err)
	}

	if err := netlink.LinkSetUp(link); err != nil {
		return fmt.Errorf("failed to set %q UP: %v", ifName, err)
	}

	i, n, err := net.ParseCIDR(conf.IPAddr)
	if err != nil {
		return fmt.Errorf("failed to parse ip address :%s", conf.IPAddr)
	}

	addr := &net.IPNet{IP: i, Mask: n.Mask}
	nlAddr := &netlink.Addr{IPNet: addr, Label: ""}
	if err = netlink.AddrAdd(link, nlAddr); err != nil {
		return fmt.Errorf("failed to add IP addr to %q: %v", ifName, err)
	}

	gw := net.ParseIP(conf.Gateway)
	if gw == nil {
		return fmt.Errorf("parse gateway: %s return nil", conf.Gateway)
	}

	if err = ip.AddDefaultRoute(gw, link); err != nil {
		// we skip over duplicate routes as we assume the first one wins
		if !os.IsExist(err) {
			return fmt.Errorf("failed to add default route via %v dev %v: %v", gw, ifName, err)
		}
	}
	return nil
}

开发者ID:TencentSA，项目名称:kubernetes-0.5，代码行数:37，代码来源:sriov.go

示例10: createInterface

func createInterface(t *testing.T, name string, nws ...string) {
	// Add interface
	link := &netlink.Bridge{
		LinkAttrs: netlink.LinkAttrs{
			Name: "test",
		},
	}
	bips := []*net.IPNet{}
	for _, nw := range nws {
		bip, err := types.ParseCIDR(nw)
		if err != nil {
			t.Fatal(err)
		}
		bips = append(bips, bip)
	}
	if err := netlink.LinkAdd(link); err != nil {
		t.Fatalf("Failed to create interface via netlink: %v", err)
	}
	for _, bip := range bips {
		if err := netlink.AddrAdd(link, &netlink.Addr{IPNet: bip}); err != nil {
			t.Fatal(err)
		}
	}
	if err := netlink.LinkSetUp(link); err != nil {
		t.Fatal(err)
	}
}

开发者ID:vdemeester，项目名称:libnetwork，代码行数:27，代码来源:utils_test.go

示例11: attach

// attach a container network interface to an external network
func (v *veth) attach(n *configs.Network) (err error) {
	brl, err := netlink.LinkByName(n.Bridge)
	if err != nil {
		return err
	}
	br, ok := brl.(*netlink.Bridge)
	if !ok {
		return fmt.Errorf("Wrong device type %T", brl)
	}
	host, err := netlink.LinkByName(n.HostInterfaceName)
	if err != nil {
		return err
	}

	if err := netlink.LinkSetMaster(host, br); err != nil {
		return err
	}
	if err := netlink.LinkSetMTU(host, n.Mtu); err != nil {
		return err
	}
	if n.HairpinMode {
		if err := netlink.LinkSetHairpin(host, true); err != nil {
			return err
		}
	}
	if err := netlink.LinkSetUp(host); err != nil {
		return err
	}

	return nil
}

开发者ID:johndmulhausen，项目名称:kubernetes，代码行数:32，代码来源:network_linux.go

示例12: loopbackUp

func loopbackUp() error {
	iface, err := netlink.LinkByName("lo")
	if err != nil {
		return err
	}
	return netlink.LinkSetUp(iface)
}

开发者ID:waterytowers，项目名称:global-hack-day-3，代码行数:7，代码来源:namespace_linux.go

示例13: setLinkUp

// setLinkUp sets the link up
func setLinkUp(name string) error {
	iface, err := netlink.LinkByName(name)
	if err != nil {
		return err
	}
	return netlink.LinkSetUp(iface)
}

开发者ID:balajisiva，项目名称:netplugin，代码行数:8，代码来源:ovsSwitch.go

示例14: acquire

func (l *DHCPLease) acquire() error {
	c, err := newDHCPClient(l.link)
	if err != nil {
		return err
	}
	defer c.Close()

	if (l.link.Attrs().Flags & net.FlagUp) != net.FlagUp {
		log.Printf("Link %q down. Attempting to set up", l.link.Attrs().Name)
		if err = netlink.LinkSetUp(l.link); err != nil {
			return err
		}
	}

	pkt, err := backoffRetry(func() (*dhcp4.Packet, error) {
		ok, ack, err := c.Request()
		switch {
		case err != nil:
			return nil, err
		case !ok:
			return nil, fmt.Errorf("DHCP server NACK'd own offer")
		default:
			return &ack, nil
		}
	})
	if err != nil {
		return err
	}

	return l.commit(pkt)
}

开发者ID:blablacar，项目名称:dgr，代码行数:31，代码来源:lease.go

示例15: ensureBridge

func ensureBridge(brName string, mtu int) (*netlink.Bridge, error) {
	br := &netlink.Bridge{
		LinkAttrs: netlink.LinkAttrs{
			Name: brName,
			MTU:  mtu,
		},
	}

	if err := netlink.LinkAdd(br); err != nil {
		if err != syscall.EEXIST {
			return nil, fmt.Errorf("could not add %q: %v", brName, err)
		}

		// it's ok if the device already exists as long as config is similar
		br, err = bridgeByName(brName)
		if err != nil {
			return nil, err
		}
	}

	if err := netlink.LinkSetUp(br); err != nil {
		return nil, err
	}

	return br, nil
}

开发者ID:aanm，项目名称:cni，代码行数:26，代码来源:bridge.go

示例16: ConfigureIface

// ConfigureIface takes the result of IPAM plugin and
// applies to the ifName interface
func ConfigureIface(ifName string, res *types.Result) error {
	link, err := netlink.LinkByName(ifName)
	if err != nil {
		return fmt.Errorf("failed to lookup %q: %v", ifName, err)
	}

	if err := netlink.LinkSetUp(link); err != nil {
		return fmt.Errorf("failed to set %q UP: %v", ifName, err)
	}

	// TODO(eyakubovich): IPv6
	addr := &netlink.Addr{IPNet: &res.IP4.IP, Label: ""}
	if err = netlink.AddrAdd(link, addr); err != nil {
		return fmt.Errorf("failed to add IP addr to %q: %v", ifName, err)
	}

	for _, r := range res.IP4.Routes {
		gw := r.GW
		if gw == nil {
			gw = res.IP4.Gateway
		}
		if err = ip.AddRoute(&r.Dst, gw, link); err != nil {
			// we skip over duplicate routes as we assume the first one wins
			if !os.IsExist(err) {
				return fmt.Errorf("failed to add route '%v via %v dev %v': %v", r.Dst, gw, ifName, err)
			}
		}
	}

	return nil
}

开发者ID:zachgersh，项目名称:cni，代码行数:33，代码来源:ipam.go

示例17: applyNetConf

func applyNetConf(link netlink.Link, netConf config.InterfaceConfig) error {
	if netConf.DHCP {
		log.Infof("Running DHCP on %s", link.Attrs().Name)
		cmd := exec.Command("dhcpcd", "-A4", "-e", "force_hostname=true", link.Attrs().Name)
		cmd.Stdout = os.Stdout
		cmd.Stderr = os.Stderr
		if err := cmd.Run(); err != nil {
			log.Error(err)
		}
	} else if netConf.IPV4LL {
		if err := AssignLinkLocalIP(link); err != nil {
			log.Error("IPV4LL set failed")
			return err
		}
	} else if netConf.Address == "" {
		return nil
	} else {
		addr, err := netlink.ParseAddr(netConf.Address)
		if err != nil {
			return err
		}
		if err := netlink.AddrAdd(link, addr); err != nil {
			log.Error("addr add failed")
			return err
		}
		log.Infof("Set %s on %s", netConf.Address, link.Attrs().Name)
	}

	if netConf.MTU > 0 {
		if err := netlink.LinkSetMTU(link, netConf.MTU); err != nil {
			log.Error("set MTU Failed")
			return err
		}
	}

	if err := netlink.LinkSetUp(link); err != nil {
		log.Error("failed to setup link")
		return err
	}

	if netConf.Gateway != "" {
		gatewayIp := net.ParseIP(netConf.Gateway)
		if gatewayIp == nil {
			return errors.New("Invalid gateway address " + netConf.Gateway)
		}

		route := netlink.Route{
			Scope: netlink.SCOPE_UNIVERSE,
			Gw:    net.ParseIP(netConf.Gateway),
		}
		if err := netlink.RouteAdd(&route); err != nil {
			log.Error("gateway set failed")
			return err
		}

		log.Infof("Set default gateway %s", netConf.Gateway)
	}

	return nil
}

开发者ID:jgatkinsn，项目名称:os，代码行数:60，代码来源:network.go

示例18: testBridgeSimpleSetup

func testBridgeSimpleSetup(t *testing.T, nsPrefix string, br *netlink.Bridge) (
	*netlink.Bridge, []*netlink.Veth, []netns.NsHandle, func()) {
	links, nets, cleanup := testNetnsPair(t, nsPrefix)

	if br == nil {
		br = &netlink.Bridge{
			LinkAttrs: netlink.LinkAttrs{
				Name: "br0",
			},
		}
		if err := netlink.LinkAdd(br); err != nil {
			cleanup()
			t.Fatal(err)
		}
	}

	cleanup2 := func() {
		netlink.LinkDel(br)
		cleanup()
	}

	if err := netlink.LinkSetMaster(links[0], br); err != nil {
		cleanup2()
		t.Fatal(err)
	}
	if err := netlink.LinkSetMaster(links[1], br); err != nil {
		cleanup2()
		t.Fatal(err)
	}
	if err := netlink.LinkSetUp(br); err != nil {
		cleanup2()
		t.Fatal(err)
	}
	return br, links, nets, cleanup2
}

开发者ID:iovisor，项目名称:iomodules，代码行数:35，代码来源:adapter_bridge_test.go

示例19: ensureBridge

func ensureBridge(brName string, mtu int) (*netlink.Bridge, error) {
	br := &netlink.Bridge{
		LinkAttrs: netlink.LinkAttrs{
			Name: brName,
			MTU:  mtu,
			// Let kernel use default txqueuelen; leaving it unset
			// means 0, and a zero-length TX queue messes up FIFO
			// traffic shapers which use TX queue length as the
			// default packet limit
			TxQLen: -1,
		},
	}

	if err := netlink.LinkAdd(br); err != nil {
		if err != syscall.EEXIST {
			return nil, fmt.Errorf("could not add %q: %v", brName, err)
		}

		// it's ok if the device already exists as long as config is similar
		br, err = bridgeByName(brName)
		if err != nil {
			return nil, err
		}
	}

	if err := netlink.LinkSetUp(br); err != nil {
		return nil, err
	}

	return br, nil
}

开发者ID:squaremo，项目名称:cni，代码行数:31，代码来源:bridge.go

示例20: AddInterface

func (n *networkNamespace) AddInterface(i *Interface) error {
	n.Lock()
	i.DstName = fmt.Sprintf("%s%d", i.DstName, n.nextIfIndex)
	n.nextIfIndex++
	n.Unlock()

	runtime.LockOSThread()
	defer runtime.UnlockOSThread()

	origns, err := netns.Get()
	if err != nil {
		return err
	}
	defer origns.Close()

	f, err := os.OpenFile(n.path, os.O_RDONLY, 0)
	if err != nil {
		return fmt.Errorf("failed get network namespace %q: %v", n.path, err)
	}
	defer f.Close()

	// Find the network interface identified by the SrcName attribute.
	iface, err := netlink.LinkByName(i.SrcName)
	if err != nil {
		return err
	}

	// Move the network interface to the destination namespace.
	nsFD := f.Fd()
	if err := netlink.LinkSetNsFd(iface, int(nsFD)); err != nil {
		return err
	}

	if err = netns.Set(netns.NsHandle(nsFD)); err != nil {
		return err
	}
	defer netns.Set(origns)

	// Down the interface before configuring
	if err := netlink.LinkSetDown(iface); err != nil {
		return err
	}

	// Configure the interface now this is moved in the proper namespace.
	if err := configureInterface(iface, i); err != nil {
		return err
	}

	// Up the interface.
	if err := netlink.LinkSetUp(iface); err != nil {
		return err
	}

	n.Lock()
	n.sinfo.Interfaces = append(n.sinfo.Interfaces, i)
	n.Unlock()

	return nil
}

开发者ID:justone，项目名称:docker，代码行数:59，代码来源:namespace_linux.go

注：本文中的github.com/vishvananda/netlink.LinkSetUp函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。