Golang nameserver.DNSServer类代码示例

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Golang中github.com/weaveworks/weave/nameserver.DNSServer类的典型用法代码示例。如果您正苦于以下问题：Golang DNSServer类的具体用法？Golang DNSServer怎么用？Golang DNSServer使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。

在下文中一共展示了DNSServer类的5个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Golang代码示例。

示例1: handleHTTP

func handleHTTP(router *weave.Router, httpAddr string, allocator *ipam.Allocator, defaultSubnet address.CIDR, docker *docker.Client, ns *nameserver.Nameserver, dnsserver *nameserver.DNSServer) {
	muxRouter := mux.NewRouter()

	if allocator != nil {
		allocator.HandleHTTP(muxRouter, defaultSubnet, docker)
	}

	ns.HandleHTTP(muxRouter)

	muxRouter.Methods("GET").Path("/status").Headers("Accept", "application/json").HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
		json, _ := router.StatusJSON(version)
		w.Header().Set("Content-Type", "application/json")
		w.Write(json)
	})

	muxRouter.Methods("GET").Path("/status").HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
		fmt.Fprintln(w, "weave router", version)
		fmt.Fprintln(w, router.Status())
		if allocator != nil {
			fmt.Fprintln(w, allocator.String())
			fmt.Fprintln(w, "Allocator default subnet:", defaultSubnet)
		}
		fmt.Fprintln(w, "")
		fmt.Fprintln(w, dnsserver.String())
		fmt.Fprintln(w, ns.String())
	})

	muxRouter.Methods("POST").Path("/connect").HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
		if err := r.ParseForm(); err != nil {
			http.Error(w, fmt.Sprint("unable to parse form: ", err), http.StatusBadRequest)
		}
		if errors := router.ConnectionMaker.InitiateConnections(r.Form["peer"], r.FormValue("replace") == "true"); len(errors) > 0 {
			http.Error(w, errorMessages(errors), http.StatusBadRequest)
		}
	})

	muxRouter.Methods("POST").Path("/forget").HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
		if err := r.ParseForm(); err != nil {
			http.Error(w, fmt.Sprint("unable to parse form: ", err), http.StatusBadRequest)
		}
		router.ConnectionMaker.ForgetConnections(r.Form["peer"])
	})

	http.Handle("/", muxRouter)

	protocol := "tcp"
	if strings.HasPrefix(httpAddr, "/") {
		os.Remove(httpAddr) // in case it's there from last time
		protocol = "unix"
	}
	l, err := net.Listen(protocol, httpAddr)
	if err != nil {
		Log.Fatal("Unable to create http listener socket: ", err)
	}

	err = http.Serve(l, nil)
	if err != nil {
		Log.Fatal("Unable to create http server", err)
	}
}

开发者ID:OnePaaS，项目名称:weave，代码行数:60，代码来源:main.go

示例2: main


//.........这里部分代码省略.........

	if ifaceName != "" {
		config.Iface, err = weavenet.EnsureInterface(ifaceName, wait)
		if err != nil {
			Log.Fatal(err)
		}
	}

	if routerName == "" {
		if config.Iface == nil {
			Log.Fatal("Either an interface must be specified with --iface or a name with -name")
		}
		routerName = config.Iface.HardwareAddr.String()
	}
	name, err := weave.PeerNameFromUserInput(routerName)
	if err != nil {
		Log.Fatal(err)
	}

	if nickName == "" {
		nickName, err = os.Hostname()
		if err != nil {
			Log.Fatal(err)
		}
	}

	if password == "" {
		password = os.Getenv("WEAVE_PASSWORD")
	}
	if password == "" {
		Log.Println("Communication between peers is unencrypted.")
	} else {
		config.Password = []byte(password)
		Log.Println("Communication between peers is encrypted.")
	}

	if prof != "" {
		p := *profile.CPUProfile
		p.ProfilePath = prof
		p.NoShutdownHook = true
		defer profile.Start(&p).Stop()
	}

	config.BufSz = bufSzMB * 1024 * 1024
	config.LogFrame = logFrameFunc(pktdebug)
	config.PeerDiscovery = !noDiscovery

	router := weave.NewRouter(config, name, nickName)
	Log.Println("Our name is", router.Ourself)

	dockerCli, err := docker.NewClient(apiPath)
	if err != nil {
		Log.Fatal("Unable to start docker client: ", err)
	}

	var allocator *ipam.Allocator
	var defaultSubnet address.CIDR
	if iprangeCIDR != "" {
		allocator, defaultSubnet = createAllocator(router, iprangeCIDR, ipsubnetCIDR, determineQuorum(peerCount, peers))
		if err = dockerCli.AddObserver(allocator); err != nil {
			Log.Fatal("Unable to start watcher", err)
		}
	} else if peerCount > 0 {
		Log.Fatal("--init-peer-count flag specified without --ipalloc-range")
	}

	var (
		ns        *nameserver.Nameserver
		dnsserver *nameserver.DNSServer
	)
	if !noDNS {
		ns = nameserver.New(router.Ourself.Peer.Name, router.Peers, dockerCli, dnsDomain)
		ns.SetGossip(router.NewGossip("nameserver", ns))
		if err = dockerCli.AddObserver(ns); err != nil {
			Log.Fatal("Unable to start watcher", err)
		}
		ns.Start()
		defer ns.Stop()
		dnsserver, err = nameserver.NewDNSServer(ns, dnsDomain, dnsPort, uint32(dnsTTL), dnsClientTimeout)
		if err != nil {
			Log.Fatal("Unable to start dns server: ", err)
		}
		dnsserver.ActivateAndServe()
		defer dnsserver.Stop()
	}

	router.Start()
	if errors := router.ConnectionMaker.InitiateConnections(peers, false); len(errors) > 0 {
		Log.Fatal(errorMessages(errors))
	}

	// The weave script always waits for a status call to succeed,
	// so there is no point in doing "weave launch --http-addr ''".
	// This is here to support stand-alone use of weaver.
	if httpAddr != "" {
		go handleHTTP(router, httpAddr, allocator, defaultSubnet, dockerCli, ns, dnsserver)
	}

	SignalHandlerLoop(router)
}

开发者ID:max-dev，项目名称:weave，代码行数:101，代码来源:main.go

示例3: main


//.........这里部分代码省略.........

	router := weave.NewNetworkRouter(config, networkConfig, name, nickName, overlay, db)
	Log.Println("Our name is", router.Ourself)

	if peers, err = router.InitialPeers(resume, peers); err != nil {
		Log.Fatal("Unable to get initial peer set: ", err)
	}

	var dockerCli *docker.Client
	dockerVersion := "none"
	if dockerAPI != "" {
		dc, err := docker.NewClient(dockerAPI)
		if err != nil {
			Log.Fatal("Unable to start docker client: ", err)
		} else {
			Log.Info(dc.Info())
		}
		dockerCli = dc
		dockerVersion = dockerCli.DockerVersion()
	}

	network := ""
	if isAWSVPC {
		network = "awsvpc"
	}
	checkForUpdates(dockerVersion, network)

	observeContainers := func(o docker.ContainerObserver) {
		if dockerCli != nil {
			if err := dockerCli.AddObserver(o); err != nil {
				Log.Fatal("Unable to start watcher", err)
			}
		}
	}
	isKnownPeer := func(name mesh.PeerName) bool {
		return router.Peers.Fetch(name) != nil
	}

	var (
		allocator     *ipam.Allocator
		defaultSubnet address.CIDR
		trackerName   string
	)
	if ipamConfig.Enabled() {
		var t tracker.LocalRangeTracker
		if isAWSVPC {
			Log.Infoln("Creating AWSVPC LocalRangeTracker")
			t, err = tracker.NewAWSVPCTracker()
			if err != nil {
				Log.Fatalf("Cannot create AWSVPC LocalRangeTracker: %s", err)
			}
			trackerName = "awsvpc"
		}
		allocator, defaultSubnet = createAllocator(router, ipamConfig, db, t, isKnownPeer)
		observeContainers(allocator)
		if dockerCli != nil {
			ids, err := dockerCli.AllContainerIDs()
			checkFatal(err)
			allocator.PruneOwned(ids)
		}
	}

	var (
		ns        *nameserver.Nameserver
		dnsserver *nameserver.DNSServer
	)
	if !noDNS {
		ns, dnsserver = createDNSServer(dnsConfig, router.Router, isKnownPeer)
		observeContainers(ns)
		ns.Start()
		defer ns.Stop()
		dnsserver.ActivateAndServe()
		defer dnsserver.Stop()
	}

	router.Start()
	if errors := router.InitiateConnections(peers, false); len(errors) > 0 {
		Log.Fatal(common.ErrorMessages(errors))
	}

	// The weave script always waits for a status call to succeed,
	// so there is no point in doing "weave launch --http-addr ''".
	// This is here to support stand-alone use of weaver.
	if httpAddr != "" {
		muxRouter := mux.NewRouter()
		if allocator != nil {
			allocator.HandleHTTP(muxRouter, defaultSubnet, trackerName, dockerCli)
		}
		if ns != nil {
			ns.HandleHTTP(muxRouter, dockerCli)
		}
		router.HandleHTTP(muxRouter)
		HandleHTTP(muxRouter, version, router, allocator, defaultSubnet, ns, dnsserver)
		http.Handle("/", common.LoggingHTTPHandler(muxRouter))
		Log.Println("Listening for HTTP control messages on", httpAddr)
		go listenAndServeHTTP(httpAddr)
	}

	common.SignalHandlerLoop(router)
}

开发者ID:n054，项目名称:weave，代码行数:101，代码来源:main.go

示例4: main


//.........这里部分代码省略.........
			Log.Fatal(err)
		}
	}

	if password == "" {
		password = os.Getenv("WEAVE_PASSWORD")
	}
	if password == "" {
		Log.Println("Communication between peers is unencrypted.")
	} else {
		config.Password = []byte(password)
		Log.Println("Communication between peers is encrypted.")
	}

	if prof != "" {
		p := *profile.CPUProfile
		p.ProfilePath = prof
		p.NoShutdownHook = true
		defer profile.Start(&p).Stop()
	}

	config.PeerDiscovery = !noDiscovery
	config.Overlay = weave.NewSleeveOverlay(config.Port)

	if pktdebug {
		config.PacketLogging = packetLogging{}
	} else {
		config.PacketLogging = nopPacketLogging{}
	}

	router := weave.NewRouter(config, name, nickName)
	Log.Println("Our name is", router.Ourself)

	var dockerCli *docker.Client
	if dockerAPI != "" {
		dc, err := docker.NewClient(dockerAPI)
		if err != nil {
			Log.Fatal("Unable to start docker client: ", err)
		}
		dockerCli = dc
	}
	observeContainers := func(o docker.ContainerObserver) {
		if dockerCli != nil {
			if err = dockerCli.AddObserver(o); err != nil {
				Log.Fatal("Unable to start watcher", err)
			}
		}
	}
	var allocator *ipam.Allocator
	var defaultSubnet address.CIDR
	if iprangeCIDR != "" {
		allocator, defaultSubnet = createAllocator(router, iprangeCIDR, ipsubnetCIDR, determineQuorum(peerCount, peers))
		observeContainers(allocator)
	} else if peerCount > 0 {
		Log.Fatal("--init-peer-count flag specified without --ipalloc-range")
	}

	var (
		ns        *nameserver.Nameserver
		dnsserver *nameserver.DNSServer
	)
	if !noDNS {
		ns = nameserver.New(router.Ourself.Peer.Name, router.Peers, dnsDomain)
		ns.SetGossip(router.NewGossip("nameserver", ns))
		observeContainers(ns)
		ns.Start()
		defer ns.Stop()
		dnsserver, err = nameserver.NewDNSServer(ns, dnsDomain, dnsListenAddress,
			dnsEffectiveListenAddress, uint32(dnsTTL), dnsClientTimeout)
		if err != nil {
			Log.Fatal("Unable to start dns server: ", err)
		}
		dnsserver.ActivateAndServe()
		defer dnsserver.Stop()
	}

	router.Start()
	if errors := router.ConnectionMaker.InitiateConnections(peers, false); len(errors) > 0 {
		Log.Fatal(ErrorMessages(errors))
	}

	// The weave script always waits for a status call to succeed,
	// so there is no point in doing "weave launch --http-addr ''".
	// This is here to support stand-alone use of weaver.
	if httpAddr != "" {
		muxRouter := mux.NewRouter()
		if allocator != nil {
			allocator.HandleHTTP(muxRouter, defaultSubnet, dockerCli)
		}
		if ns != nil {
			ns.HandleHTTP(muxRouter, dockerCli)
		}
		router.HandleHTTP(muxRouter)
		HandleHTTP(muxRouter, version, router, allocator, defaultSubnet, ns, dnsserver)
		http.Handle("/", muxRouter)
		go listenAndServeHTTP(httpAddr, muxRouter)
	}

	SignalHandlerLoop(router)
}

开发者ID:pdaniel-frk，项目名称:weave，代码行数:101，代码来源:main.go

示例5: main


//.........这里部分代码省略.........
		p := *profile.CPUProfile
		p.ProfilePath = prof
		p.NoShutdownHook = true
		defer profile.Start(&p).Stop()
	}

	config.PeerDiscovery = !noDiscovery

	if pktdebug {
		networkConfig.PacketLogging = packetLogging{}
	} else {
		networkConfig.PacketLogging = nopPacketLogging{}
	}

	if config.TrustedSubnets, err = parseTrustedSubnets(trustedSubnetStr); err != nil {
		Log.Fatal("Unable to parse trusted subnets: ", err)
	}

	router := weave.NewNetworkRouter(config, networkConfig, name, nickName, overlays)
	Log.Println("Our name is", router.Ourself)

	var dockerCli *docker.Client
	if dockerAPI != "" {
		dc, err := docker.NewClient(dockerAPI)
		if err != nil {
			Log.Fatal("Unable to start docker client: ", err)
		} else {
			Log.Info(dc.Info())
		}
		dockerCli = dc
	}
	observeContainers := func(o docker.ContainerObserver) {
		if dockerCli != nil {
			if err = dockerCli.AddObserver(o); err != nil {
				Log.Fatal("Unable to start watcher", err)
			}
		}
	}
	isKnownPeer := func(name mesh.PeerName) bool {
		return router.Peers.Fetch(name) != nil
	}
	var allocator *ipam.Allocator
	var defaultSubnet address.CIDR
	if iprangeCIDR != "" {
		allocator, defaultSubnet = createAllocator(router.Router, iprangeCIDR, ipsubnetCIDR, determineQuorum(peerCount, peers), isKnownPeer)
		observeContainers(allocator)
	} else if peerCount > 0 {
		Log.Fatal("--init-peer-count flag specified without --ipalloc-range")
	}

	var (
		ns        *nameserver.Nameserver
		dnsserver *nameserver.DNSServer
	)
	if !noDNS {
		ns = nameserver.New(router.Ourself.Peer.Name, dnsDomain, isKnownPeer)
		router.Peers.OnGC(func(peer *mesh.Peer) { ns.PeerGone(peer.Name) })
		ns.SetGossip(router.NewGossip("nameserver", ns))
		observeContainers(ns)
		ns.Start()
		defer ns.Stop()
		dnsserver, err = nameserver.NewDNSServer(ns, dnsDomain, dnsListenAddress,
			dnsEffectiveListenAddress, uint32(dnsTTL), dnsClientTimeout)
		if err != nil {
			Log.Fatal("Unable to start dns server: ", err)
		}
		listenAddr := dnsListenAddress
		if dnsEffectiveListenAddress != "" {
			listenAddr = dnsEffectiveListenAddress
		}
		Log.Println("Listening for DNS queries on", listenAddr)
		dnsserver.ActivateAndServe()
		defer dnsserver.Stop()
	}

	router.Start()
	if errors := router.ConnectionMaker.InitiateConnections(peers, false); len(errors) > 0 {
		Log.Fatal(ErrorMessages(errors))
	}

	// The weave script always waits for a status call to succeed,
	// so there is no point in doing "weave launch --http-addr ''".
	// This is here to support stand-alone use of weaver.
	if httpAddr != "" {
		muxRouter := mux.NewRouter()
		if allocator != nil {
			allocator.HandleHTTP(muxRouter, defaultSubnet, dockerCli)
		}
		if ns != nil {
			ns.HandleHTTP(muxRouter, dockerCli)
		}
		router.HandleHTTP(muxRouter)
		HandleHTTP(muxRouter, version, router, allocator, defaultSubnet, ns, dnsserver)
		http.Handle("/", muxRouter)
		Log.Println("Listening for HTTP control messages on", httpAddr)
		go listenAndServeHTTP(httpAddr, muxRouter)
	}

	SignalHandlerLoop(router)
}

开发者ID:codingbunch，项目名称:weave，代码行数:101，代码来源:main.go

注：本文中的github.com/weaveworks/weave/nameserver.DNSServer类示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。