Golang fuse.ToStatus函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Golang中github.com/y-okubo/go-fuse/fuse.ToStatus函数的典型用法代码示例。如果您正苦于以下问题：Golang ToStatus函数的具体用法？Golang ToStatus怎么用？Golang ToStatus使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了ToStatus函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Golang代码示例。

示例1: Flush

func (f *loopbackFile) Flush() fuse.Status {
	f.lock.Lock()

	// Since Flush() may be called for each dup'd fd, we don't
	// want to really close the file, we just want to flush. This
	// is achieved by closing a dup'd fd.
	newFd, err := syscall.Dup(int(f.File.Fd()))
	f.lock.Unlock()

	if err != nil {
		return fuse.ToStatus(err)
	}
	err = syscall.Close(newFd)
	return fuse.ToStatus(err)
}

开发者ID:y-okubo，项目名称:go-fuse，代码行数:15，代码来源:files.go

示例2: Truncate

func (f *loopbackFile) Truncate(size uint64) fuse.Status {
	f.lock.Lock()
	r := fuse.ToStatus(syscall.Ftruncate(int(f.File.Fd()), int64(size)))
	f.lock.Unlock()

	return r
}

开发者ID:y-okubo，项目名称:go-fuse，代码行数:7，代码来源:files.go

示例3: Fsync

func (f *loopbackFile) Fsync(flags int) (code fuse.Status) {
	f.lock.Lock()
	r := fuse.ToStatus(syscall.Fsync(int(f.File.Fd())))
	f.lock.Unlock()

	return r
}

开发者ID:y-okubo，项目名称:go-fuse，代码行数:7，代码来源:files.go

示例4: Chown

func (f *loopbackFile) Chown(uid uint32, gid uint32) fuse.Status {
	f.lock.Lock()
	r := fuse.ToStatus(f.File.Chown(int(uid), int(gid)))
	f.lock.Unlock()

	return r
}

开发者ID:y-okubo，项目名称:go-fuse，代码行数:7，代码来源:files.go

示例5: Chmod

func (f *loopbackFile) Chmod(mode uint32) fuse.Status {
	f.lock.Lock()
	r := fuse.ToStatus(f.File.Chmod(os.FileMode(mode)))
	f.lock.Unlock()

	return r
}

开发者ID:y-okubo，项目名称:go-fuse，代码行数:7，代码来源:files.go

示例6: TestUnionFSBarf

func TestUnionFSBarf(t *testing.T) {
	wd, clean := setupUfs(t)
	defer clean()

	if err := os.Mkdir(wd+"/mnt/dir", 0755); err != nil {
		t.Fatalf("os.Mkdir: %v", err)
	}
	if err := os.Mkdir(wd+"/mnt/dir2", 0755); err != nil {
		t.Fatalf("os.Mkdir: %v", err)
	}
	if err := ioutil.WriteFile(wd+"/rw/dir/file", []byte("bla"), 0644); err != nil {
		t.Fatalf("WriteFile failed: %v", err)
	}
	if _, err := os.Lstat(wd + "/mnt/dir/file"); err != nil {
		t.Fatalf("Lstat: %v", err)
	}
	if err := os.Rename(wd+"/rw/dir/file", wd+"/rw/file"); err != nil {
		t.Fatalf("os.Rename: %v", err)
	}

	err := os.Rename(wd+"/mnt/file", wd+"/mnt/dir2/file")
	if fuse.ToStatus(err) != fuse.ENOENT {
		// TODO - this should just succeed?
		t.Fatalf("os.Rename: %v", err)
	}
}

开发者ID:y-okubo，项目名称:go-fuse，代码行数:26，代码来源:unionfs_test.go

示例7: Open

func (fs *loopbackFileSystem) Open(name string, flags uint32, context *fuse.Context) (fuseFile nodefs.File, status fuse.Status) {
	f, err := os.OpenFile(fs.GetPath(name), int(flags), 0)
	if err != nil {
		return nil, fuse.ToStatus(err)
	}
	return nodefs.NewLoopbackFile(f), fuse.OK
}

开发者ID:y-okubo，项目名称:go-fuse，代码行数:7，代码来源:loopback.go

示例8: Open

func (n *memNode) Open(flags uint32, context *fuse.Context) (file File, code fuse.Status) {
	f, err := os.OpenFile(n.filename(), int(flags), 0666)
	if err != nil {
		return nil, fuse.ToStatus(err)
	}

	return n.newFile(f), fuse.OK
}

开发者ID:y-okubo，项目名称:go-fuse，代码行数:8，代码来源:memnode.go

示例9: Allocate

func (f *loopbackFile) Allocate(off uint64, sz uint64, mode uint32) fuse.Status {
	f.lock.Lock()
	err := syscall.Fallocate(int(f.File.Fd()), mode, int64(off), int64(sz))
	f.lock.Unlock()
	if err != nil {
		return fuse.ToStatus(err)
	}
	return fuse.OK
}

开发者ID:y-okubo，项目名称:go-fuse，代码行数:9，代码来源:files_linux.go

示例10: Create

func (n *memNode) Create(name string, flags uint32, mode uint32, context *fuse.Context) (file File, node *Inode, code fuse.Status) {
	ch := n.newNode(name, false)
	ch.info.Mode = mode | fuse.S_IFREG

	f, err := os.Create(ch.filename())
	if err != nil {
		return nil, nil, fuse.ToStatus(err)
	}
	return ch.newFile(f), ch.Inode(), fuse.OK
}

开发者ID:y-okubo，项目名称:go-fuse，代码行数:10，代码来源:memnode.go

示例11: Utimens

func (fs *loopbackFileSystem) Utimens(path string, Atime *time.Time, Mtime *time.Time, context *fuse.Context) (code fuse.Status) {
	var a time.Time
	if Atime != nil {
		a = *Atime
	}
	var m time.Time
	if Mtime != nil {
		m = *Mtime
	}
	return fuse.ToStatus(os.Chtimes(fs.GetPath(path), a, m))
}

开发者ID:y-okubo，项目名称:go-fuse，代码行数:11，代码来源:loopback.go

示例12: GetAttr

func (f *loopbackFile) GetAttr(a *fuse.Attr) fuse.Status {
	st := syscall.Stat_t{}
	f.lock.Lock()
	err := syscall.Fstat(int(f.File.Fd()), &st)
	f.lock.Unlock()
	if err != nil {
		return fuse.ToStatus(err)
	}
	a.FromStat(&st)

	return fuse.OK
}

开发者ID:y-okubo，项目名称:go-fuse，代码行数:12，代码来源:files.go

示例13: Allocate

func (f *loopbackFile) Allocate(off uint64, sz uint64, mode uint32) fuse.Status {
	// TODO: Handle `mode` parameter.

	// From `man fcntl` on OSX:
	//     The F_PREALLOCATE command operates on the following structure:
	//
	//             typedef struct fstore {
	//                 u_int32_t fst_flags;      /* IN: flags word */
	//                 int       fst_posmode;    /* IN: indicates offset field */
	//                 off_t     fst_offset;     /* IN: start of the region */
	//                 off_t     fst_length;     /* IN: size of the region */
	//                 off_t     fst_bytesalloc; /* OUT: number of bytes allocated */
	//             } fstore_t;
	//
	//     The flags (fst_flags) for the F_PREALLOCATE command are as follows:
	//
	//           F_ALLOCATECONTIG   Allocate contiguous space.
	//
	//           F_ALLOCATEALL      Allocate all requested space or no space at all.
	//
	//     The position modes (fst_posmode) for the F_PREALLOCATE command indicate how to use the offset field.  The modes are as fol-
	//     lows:
	//
	//           F_PEOFPOSMODE   Allocate from the physical end of file.
	//
	//           F_VOLPOSMODE    Allocate from the volume offset.

	k := struct {
		Flags      uint32 // u_int32_t
		Posmode    int64  // int
		Offset     int64  // off_t
		Length     int64  // off_t
		Bytesalloc int64  // off_t
	}{
		0,
		0,
		int64(off),
		int64(sz),
		0,
	}

	// Linux version for reference:
	// err := syscall.Fallocate(int(f.File.Fd()), mode, int64(off), int64(sz))

	f.lock.Lock()
	_, _, errno := syscall.Syscall(syscall.SYS_FCNTL, f.File.Fd(), uintptr(syscall.F_PREALLOCATE), uintptr(unsafe.Pointer(&k)))
	f.lock.Unlock()
	if errno != 0 {
		return fuse.ToStatus(errno)
	}
	return fuse.OK
}

开发者ID:y-okubo，项目名称:go-fuse，代码行数:52，代码来源:files_darwin.go

示例14: Flush

func (n *memNodeFile) Flush() fuse.Status {
	code := n.File.Flush()

	if !code.Ok() {
		return code
	}

	st := syscall.Stat_t{}
	err := syscall.Stat(n.node.filename(), &st)
	n.node.info.Size = uint64(st.Size)
	n.node.info.Blocks = uint64(st.Blocks)
	return fuse.ToStatus(err)
}

开发者ID:y-okubo，项目名称:go-fuse，代码行数:13，代码来源:memnode.go

示例15: TestCreationChecks

func TestCreationChecks(t *testing.T) {
	wd, clean := setup(t)
	defer clean()

	err := os.Mkdir(wd+"/store/foo", 0755)
	if err != nil {
		t.Fatalf("Mkdir failed: %v", err)
	}
	os.Symlink(wd+"/ro", wd+"/store/foo/READONLY")
	if err != nil {
		t.Fatalf("Symlink failed: %v", err)
	}

	err = os.Mkdir(wd+"/store/ws2", 0755)
	if err != nil {
		t.Fatalf("Mkdir failed: %v", err)
	}
	os.Symlink(wd+"/ro", wd+"/store/ws2/READONLY")
	if err != nil {
		t.Fatalf("Symlink failed: %v", err)
	}

	err = os.Symlink(wd+"/store/foo", wd+"/mnt/config/bar")
	if err != nil {
		t.Fatalf("Symlink failed: %v", err)
	}

	err = os.Symlink(wd+"/store/foo", wd+"/mnt/config/foo")
	code := fuse.ToStatus(err)
	if code != fuse.EBUSY {
		t.Error("Should return EBUSY", err)
	}

	err = os.Symlink(wd+"/store/ws2", wd+"/mnt/config/config")
	code = fuse.ToStatus(err)
	if code != fuse.EINVAL {
		t.Error("Should return EINVAL", err)
	}
}

开发者ID:y-okubo，项目名称:go-fuse，代码行数:39，代码来源:autounion_test.go

示例16: TestUnionFsChown

func TestUnionFsChown(t *testing.T) {
	wd, clean := setupUfs(t)
	defer clean()

	ro_fn := wd + "/ro/file"
	m_fn := wd + "/mnt/file"
	WriteFile(t, ro_fn, "a")

	err := os.Chown(m_fn, 0, 0)
	code := fuse.ToStatus(err)
	if code != fuse.EPERM {
		t.Error("Unexpected error code", code, err)
	}
}

开发者ID:y-okubo，项目名称:go-fuse，代码行数:14，代码来源:unionfs_test.go

示例17: TestMountRename

func TestMountRename(t *testing.T) {
	ts := NewTestCase(t)
	defer ts.Cleanup()

	fs := pathfs.NewPathNodeFs(pathfs.NewLoopbackFileSystem(ts.orig), nil)
	code := ts.connector.Mount(ts.rootNode(), "mnt", fs.Root(), nil)
	if !code.Ok() {
		t.Fatal("mount should succeed")
	}
	err := os.Rename(ts.mnt+"/mnt", ts.mnt+"/foobar")
	if fuse.ToStatus(err) != fuse.EBUSY {
		t.Fatal("rename mount point should fail with EBUSY:", err)
	}
	ts.pathFs.Unmount("mnt")
}

开发者ID:y-okubo，项目名称:go-fuse，代码行数:15，代码来源:mount_test.go

示例18: Truncate

func (n *memNode) Truncate(file File, size uint64, context *fuse.Context) (code fuse.Status) {
	if file != nil {
		code = file.Truncate(size)
	} else {
		err := os.Truncate(n.filename(), int64(size))
		code = fuse.ToStatus(err)
	}
	if code.Ok() {
		now := time.Now()
		n.info.SetTimes(nil, nil, &now)
		// TODO - should update mtime too?
		n.info.Size = size
	}
	return code
}

开发者ID:y-okubo，项目名称:go-fuse，代码行数:15，代码来源:memnode.go

示例19: GetAttr

func (fs *loopbackFileSystem) GetAttr(name string, context *fuse.Context) (a *fuse.Attr, code fuse.Status) {
	fullPath := fs.GetPath(name)
	var err error = nil
	st := syscall.Stat_t{}
	if name == "" {
		// When GetAttr is called for the toplevel directory, we always want
		// to look through symlinks.
		err = syscall.Stat(fullPath, &st)
	} else {
		err = syscall.Lstat(fullPath, &st)
	}

	if err != nil {
		return nil, fuse.ToStatus(err)
	}
	a = &fuse.Attr{}
	a.FromStat(&st)
	return a, fuse.OK
}

开发者ID:y-okubo，项目名称:go-fuse，代码行数:19，代码来源:loopback.go

示例20: Utimens

func (f *loopbackFile) Utimens(a *time.Time, m *time.Time) fuse.Status {
	var ts = make([]syscall.Timeval, 2)

	if a == nil {
		ts[0].Sec = _UTIME_OMIT
	} else {
		ts[0].Sec = a.Unix()
	}

	if m == nil {
		ts[1].Sec = _UTIME_OMIT
	} else {
		ts[1].Sec = m.Unix()
	}

	f.lock.Lock()
	err := syscall.Futimes(int(f.File.Fd()), ts)
	f.lock.Unlock()
	return fuse.ToStatus(err)
}

开发者ID:y-okubo，项目名称:go-fuse，代码行数:20，代码来源:files.go

注：本文中的github.com/y-okubo/go-fuse/fuse.ToStatus函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。