func (scw *SplitCloneWorker) initShardsForHorizontalResharding(ctx context.Context) error {
	// find the OverlappingShards in the keyspace
	shortCtx, cancel := context.WithTimeout(ctx, *remoteActionsTimeout)
	osList, err := topotools.FindOverlappingShards(shortCtx, scw.wr.TopoServer(), scw.destinationKeyspace)
	cancel()
	if err != nil {
		return fmt.Errorf("cannot FindOverlappingShards in %v: %v", scw.destinationKeyspace, err)
	}

	// find the shard we mentioned in there, if any
	os := topotools.OverlappingShardsForShard(osList, scw.shard)
	if os == nil {
		return fmt.Errorf("the specified shard %v/%v is not in any overlapping shard", scw.destinationKeyspace, scw.shard)
	}
	scw.wr.Logger().Infof("Found overlapping shards: %+v\n", os)

	// one side should have served types, the other one none,
	// figure out wich is which, then double check them all
	if len(os.Left[0].ServedTypes) > 0 {
		scw.sourceShards = os.Left
		scw.destinationShards = os.Right
	} else {
		scw.sourceShards = os.Right
		scw.destinationShards = os.Left
	}

	return nil
}

// init phase:
// - read the destination keyspace, make sure it has 'servedFrom' values
func (scw *SplitCloneWorker) init(ctx context.Context) error {
	scw.setState(WorkerStateInit)
	var err error

	// read the keyspace and validate it
	shortCtx, cancel := context.WithTimeout(ctx, *remoteActionsTimeout)
	scw.keyspaceInfo, err = scw.wr.TopoServer().GetKeyspace(shortCtx, scw.keyspace)
	cancel()
	if err != nil {
		return fmt.Errorf("cannot read keyspace %v: %v", scw.keyspace, err)
	}

	// find the OverlappingShards in the keyspace
	shortCtx, cancel = context.WithTimeout(ctx, *remoteActionsTimeout)
	osList, err := topotools.FindOverlappingShards(shortCtx, scw.wr.TopoServer(), scw.keyspace)
	cancel()
	if err != nil {
		return fmt.Errorf("cannot FindOverlappingShards in %v: %v", scw.keyspace, err)
	}

	// find the shard we mentioned in there, if any
	os := topotools.OverlappingShardsForShard(osList, scw.shard)
	if os == nil {
		return fmt.Errorf("the specified shard %v/%v is not in any overlapping shard", scw.keyspace, scw.shard)
	}
	scw.wr.Logger().Infof("Found overlapping shards: %+v\n", os)

	// one side should have served types, the other one none,
	// figure out wich is which, then double check them all
	if len(os.Left[0].ServedTypes) > 0 {
		scw.sourceShards = os.Left
		scw.destinationShards = os.Right
	} else {
		scw.sourceShards = os.Right
		scw.destinationShards = os.Left
	}

	// validate all serving types
	servingTypes := []pb.TabletType{pb.TabletType_MASTER, pb.TabletType_REPLICA, pb.TabletType_RDONLY}
	for _, st := range servingTypes {
		for _, si := range scw.sourceShards {
			if si.GetServedType(st) == nil {
				return fmt.Errorf("source shard %v/%v is not serving type %v", si.Keyspace(), si.ShardName(), st)
			}
		}
	}
	for _, si := range scw.destinationShards {
		if len(si.ServedTypes) > 0 {
			return fmt.Errorf("destination shard %v/%v is serving some types", si.Keyspace(), si.ShardName())
		}
	}

	return nil
}

// init phase:
// - read the destination keyspace, make sure it has 'servedFrom' values
func (scw *SplitCloneWorker) init() error {
	scw.setState(stateSCInit)
	var err error

	// read the keyspace and validate it
	scw.keyspaceInfo, err = scw.wr.TopoServer().GetKeyspace(scw.keyspace)
	if err != nil {
		return fmt.Errorf("cannot read keyspace %v: %v", scw.keyspace, err)
	}

	// find the OverlappingShards in the keyspace
	osList, err := topotools.FindOverlappingShards(scw.wr.TopoServer(), scw.keyspace)
	if err != nil {
		return fmt.Errorf("cannot FindOverlappingShards in %v: %v", scw.keyspace, err)
	}

	// find the shard we mentioned in there, if any
	os := topotools.OverlappingShardsForShard(osList, scw.shard)
	if os == nil {
		return fmt.Errorf("the specified shard %v/%v is not in any overlapping shard", scw.keyspace, scw.shard)
	}

	// one side should have served types, the other one none,
	// figure out wich is which, then double check them all
	if len(os.Left[0].ServedTypesMap) > 0 {
		scw.sourceShards = os.Left
		scw.destinationShards = os.Right
	} else {
		scw.sourceShards = os.Right
		scw.destinationShards = os.Left
	}

	// validate all serving types
	servingTypes := []topo.TabletType{topo.TYPE_MASTER, topo.TYPE_REPLICA, topo.TYPE_RDONLY}
	for _, st := range servingTypes {
		for _, si := range scw.sourceShards {
			if _, ok := si.ServedTypesMap[st]; !ok {
				return fmt.Errorf("source shard %v/%v is not serving type %v", si.Keyspace(), si.ShardName(), st)
			}
		}
	}
	for _, si := range scw.destinationShards {
		if len(si.ServedTypesMap) > 0 {
			return fmt.Errorf("destination shard %v/%v is serving some types", si.Keyspace(), si.ShardName())
		}
	}

	return nil
}

// MigrateServedTypes is used during horizontal splits to migrate a
// served type from a list of shards to another.
func (wr *Wrangler) MigrateServedTypes(ctx context.Context, keyspace, shard string, cells []string, servedType topodatapb.TabletType, reverse, skipReFreshState bool, filteredReplicationWaitTime time.Duration) error {
	if servedType == topodatapb.TabletType_MASTER {
		// we cannot migrate a master back, since when master migration
		// is done, the source shards are dead
		if reverse {
			return fmt.Errorf("Cannot migrate master back to %v/%v", keyspace, shard)
		}
		// we cannot skip refresh state for a master
		if skipReFreshState {
			return fmt.Errorf("Cannot skip refresh state for master migration on %v/%v", keyspace, shard)
		}
	}

	// find overlapping shards in this keyspace
	wr.Logger().Infof("Finding the overlapping shards in keyspace %v", keyspace)
	osList, err := topotools.FindOverlappingShards(ctx, wr.ts, keyspace)
	if err != nil {
		return fmt.Errorf("FindOverlappingShards failed: %v", err)
	}

	// find our shard in there
	os := topotools.OverlappingShardsForShard(osList, shard)
	if os == nil {
		return fmt.Errorf("Shard %v is not involved in any overlapping shards", shard)
	}

	// find which list is which: the sources have no source
	// shards, the destination have source shards. We check the
	// first entry in the lists, then just check they're
	// consistent
	var sourceShards []*topo.ShardInfo
	var destinationShards []*topo.ShardInfo
	if len(os.Left[0].SourceShards) == 0 {
		sourceShards = os.Left
		destinationShards = os.Right
	} else {
		sourceShards = os.Right
		destinationShards = os.Left
	}

	// Verify the sources has the type we're migrating (or not if reverse)
	for _, si := range sourceShards {
		if err := si.CheckServedTypesMigration(servedType, cells, !reverse); err != nil {
			return err
		}
	}

	// Verify the destinations do not have the type we're
	// migrating (or do if reverse)
	for _, si := range destinationShards {
		if err := si.CheckServedTypesMigration(servedType, cells, reverse); err != nil {
			return err
		}
	}

	// lock the shards: sources, then destinations
	// (note they're all ordered by shard name)
	actionNode := actionnode.MigrateServedTypes(servedType)
	sourceLockPath := make([]string, len(sourceShards))
	for i, si := range sourceShards {
		sourceLockPath[i], err = wr.lockShard(ctx, si.Keyspace(), si.ShardName(), actionNode)
		if err != nil {
			wr.Logger().Errorf("Failed to lock source shard %v/%v, may need to unlock other shards manually", si.Keyspace(), si.ShardName())
			return err
		}
	}
	destinationLockPath := make([]string, len(destinationShards))
	for i, si := range destinationShards {
		destinationLockPath[i], err = wr.lockShard(ctx, si.Keyspace(), si.ShardName(), actionNode)
		if err != nil {
			wr.Logger().Errorf("Failed to lock destination shard %v/%v, may need to unlock other shards manually", si.Keyspace(), si.ShardName())
			return err
		}
	}

	// record the action error and all unlock errors
	rec := concurrency.AllErrorRecorder{}

	// execute the migration
	rec.RecordError(wr.migrateServedTypes(ctx, keyspace, sourceShards, destinationShards, cells, servedType, reverse, filteredReplicationWaitTime))

	// unlock the shards, we're done
	for i := len(destinationShards) - 1; i >= 0; i-- {
		rec.RecordError(wr.unlockShard(ctx, destinationShards[i].Keyspace(), destinationShards[i].ShardName(), actionNode, destinationLockPath[i], nil))
	}
	for i := len(sourceShards) - 1; i >= 0; i-- {
		rec.RecordError(wr.unlockShard(ctx, sourceShards[i].Keyspace(), sourceShards[i].ShardName(), actionNode, sourceLockPath[i], nil))
	}

	// rebuild the keyspace serving graph if there was no error
	if !rec.HasErrors() {
		rec.RecordError(wr.RebuildKeyspaceGraph(ctx, keyspace, cells, false))
	}

	// Send a refresh to the tablets we just disabled, iff:
	// - we're not migrating a master
	// - we don't have any errors
	// - we're not told to skip the refresh
//.........这里部分代码省略.........

// MigrateServedTypes is used during horizontal splits to migrate a
// served type from a list of shards to another.
func (wr *Wrangler) MigrateServedTypes(ctx context.Context, keyspace, shard string, cells []string, servedType topodatapb.TabletType, reverse, skipReFreshState bool, filteredReplicationWaitTime time.Duration) (err error) {
	// check input parameters
	if servedType == topodatapb.TabletType_MASTER {
		// we cannot migrate a master back, since when master migration
		// is done, the source shards are dead
		if reverse {
			return fmt.Errorf("Cannot migrate master back to %v/%v", keyspace, shard)
		}
		// we cannot skip refresh state for a master
		if skipReFreshState {
			return fmt.Errorf("Cannot skip refresh state for master migration on %v/%v", keyspace, shard)
		}
	}

	// lock the keyspace
	ctx, unlock, lockErr := wr.ts.LockKeyspace(ctx, keyspace, fmt.Sprintf("MigrateServedTypes(%v)", servedType))
	if lockErr != nil {
		return lockErr
	}
	defer unlock(&err)

	// find overlapping shards in this keyspace
	wr.Logger().Infof("Finding the overlapping shards in keyspace %v", keyspace)
	osList, err := topotools.FindOverlappingShards(ctx, wr.ts, keyspace)
	if err != nil {
		return fmt.Errorf("FindOverlappingShards failed: %v", err)
	}

	// find our shard in there
	os := topotools.OverlappingShardsForShard(osList, shard)
	if os == nil {
		return fmt.Errorf("Shard %v is not involved in any overlapping shards", shard)
	}

	// find which list is which: the sources have no source
	// shards, the destination have source shards. We check the
	// first entry in the lists, then just check they're
	// consistent
	var sourceShards []*topo.ShardInfo
	var destinationShards []*topo.ShardInfo
	if len(os.Left[0].SourceShards) == 0 {
		sourceShards = os.Left
		destinationShards = os.Right
	} else {
		sourceShards = os.Right
		destinationShards = os.Left
	}

	// Verify the sources has the type we're migrating (or not if reverse)
	for _, si := range sourceShards {
		if err := si.CheckServedTypesMigration(servedType, cells, !reverse); err != nil {
			return err
		}
	}

	// Verify the destinations do not have the type we're
	// migrating (or do if reverse)
	for _, si := range destinationShards {
		if err := si.CheckServedTypesMigration(servedType, cells, reverse); err != nil {
			return err
		}
	}

	// execute the migration
	if err = wr.migrateServedTypesLocked(ctx, keyspace, sourceShards, destinationShards, cells, servedType, reverse, filteredReplicationWaitTime); err != nil {
		return err
	}

	// rebuild the keyspace serving graph now that there is no error
	if err = topotools.RebuildKeyspaceLocked(ctx, wr.logger, wr.ts, keyspace, cells); err != nil {
		return err
	}

	// Send a refresh to the tablets we just disabled, iff:
	// - we're not migrating a master
	// - we don't have any errors
	// - we're not told to skip the refresh
	if servedType != topodatapb.TabletType_MASTER && !skipReFreshState {
		rec := concurrency.AllErrorRecorder{}
		var refreshShards []*topo.ShardInfo
		if reverse {
			// For a backwards migration, we just disabled query service on the destination shards
			refreshShards = destinationShards
		} else {
			// For a forwards migration, we just disabled query service on the source shards
			refreshShards = sourceShards
		}
		for _, si := range refreshShards {
			rec.RecordError(wr.RefreshTabletsByShard(ctx, si, servedType, cells))
		}
		return rec.Error()
	}

	return nil
}

// init phase:
// - read the destination keyspace, make sure it has 'servedFrom' values
func (scw *SplitCloneWorker) init(ctx context.Context) error {
	scw.setState(WorkerStateInit)
	var err error

	// read the keyspace and validate it
	shortCtx, cancel := context.WithTimeout(ctx, *remoteActionsTimeout)
	scw.keyspaceInfo, err = scw.wr.TopoServer().GetKeyspace(shortCtx, scw.keyspace)
	cancel()
	if err != nil {
		return fmt.Errorf("cannot read keyspace %v: %v", scw.keyspace, err)
	}

	// find the OverlappingShards in the keyspace
	shortCtx, cancel = context.WithTimeout(ctx, *remoteActionsTimeout)
	osList, err := topotools.FindOverlappingShards(shortCtx, scw.wr.TopoServer(), scw.keyspace)
	cancel()
	if err != nil {
		return fmt.Errorf("cannot FindOverlappingShards in %v: %v", scw.keyspace, err)
	}

	// find the shard we mentioned in there, if any
	os := topotools.OverlappingShardsForShard(osList, scw.shard)
	if os == nil {
		return fmt.Errorf("the specified shard %v/%v is not in any overlapping shard", scw.keyspace, scw.shard)
	}
	scw.wr.Logger().Infof("Found overlapping shards: %+v\n", os)

	// one side should have served types, the other one none,
	// figure out wich is which, then double check them all
	if len(os.Left[0].ServedTypes) > 0 {
		scw.sourceShards = os.Left
		scw.destinationShards = os.Right
	} else {
		scw.sourceShards = os.Right
		scw.destinationShards = os.Left
	}

	// Verify that filtered replication is not already enabled.
	for _, si := range scw.destinationShards {
		if len(si.SourceShards) > 0 {
			return fmt.Errorf("destination shard %v/%v has filtered replication already enabled from a previous resharding (ShardInfo is set)."+
				" This requires manual intervention e.g. use vtctl SourceShardDelete to remove it",
				si.Keyspace(), si.ShardName())
		}
	}

	// validate all serving types
	servingTypes := []topodatapb.TabletType{topodatapb.TabletType_MASTER, topodatapb.TabletType_REPLICA, topodatapb.TabletType_RDONLY}
	for _, st := range servingTypes {
		for _, si := range scw.sourceShards {
			if si.GetServedType(st) == nil {
				return fmt.Errorf("source shard %v/%v is not serving type %v", si.Keyspace(), si.ShardName(), st)
			}
		}
	}
	for _, si := range scw.destinationShards {
		if len(si.ServedTypes) > 0 {
			return fmt.Errorf("destination shard %v/%v is serving some types", si.Keyspace(), si.ShardName())
		}
	}

	// read the vschema if needed
	var keyspaceSchema *vindexes.KeyspaceSchema
	if *useV3ReshardingMode {
		kschema, err := scw.wr.TopoServer().GetVSchema(ctx, scw.keyspace)
		if err != nil {
			return fmt.Errorf("cannot load VSchema for keyspace %v: %v", scw.keyspace, err)
		}
		if kschema == nil {
			return fmt.Errorf("no VSchema for keyspace %v", scw.keyspace)
		}

		keyspaceSchema, err = vindexes.BuildKeyspaceSchema(kschema, scw.keyspace)
		if err != nil {
			return fmt.Errorf("cannot build vschema for keyspace %v: %v", scw.keyspace, err)
		}
		scw.keyspaceSchema = keyspaceSchema
	}

	// Initialize healthcheck and add destination shards to it.
	scw.healthCheck = discovery.NewHealthCheck(*remoteActionsTimeout, *healthcheckRetryDelay, *healthCheckTimeout)
	allShards := append(scw.sourceShards, scw.destinationShards...)
	for _, si := range allShards {
		watcher := discovery.NewShardReplicationWatcher(scw.wr.TopoServer(), scw.healthCheck,
			scw.cell, si.Keyspace(), si.ShardName(),
			*healthCheckTopologyRefresh, discovery.DefaultTopoReadConcurrency)
		scw.shardWatchers = append(scw.shardWatchers, watcher)
	}

	return nil
}

// MigrateServedTypes is used during horizontal splits to migrate a
// served type from a list of shards to another.
func (wr *Wrangler) MigrateServedTypes(keyspace, shard string, servedType topo.TabletType, reverse, skipRebuild bool) error {
	if servedType == topo.TYPE_MASTER {
		// we cannot migrate a master back, since when master migration
		// is done, the source shards are dead
		if reverse {
			return fmt.Errorf("Cannot migrate master back to %v/%v", keyspace, shard)
		}
		// we cannot skip rebuild for a master
		if skipRebuild {
			return fmt.Errorf("Cannot skip rebuild for master migration on %v/%v", keyspace, shard)
		}
	}

	// find overlapping shards in this keyspace
	wr.Logger().Infof("Finding the overlapping shards in keyspace %v", keyspace)
	osList, err := topotools.FindOverlappingShards(wr.ts, keyspace)
	if err != nil {
		return fmt.Errorf("FindOverlappingShards failed: %v", err)
	}

	// find our shard in there
	os := topotools.OverlappingShardsForShard(osList, shard)
	if os == nil {
		return fmt.Errorf("Shard %v is not involved in any overlapping shards", shard)
	}

	// find which list is which: the sources have no source
	// shards, the destination have source shards. We check the
	// first entry in the lists, then just check they're
	// consistent
	var sourceShards []*topo.ShardInfo
	var destinationShards []*topo.ShardInfo
	if len(os.Left[0].SourceShards) == 0 {
		sourceShards = os.Left
		destinationShards = os.Right
	} else {
		sourceShards = os.Right
		destinationShards = os.Left
	}

	// Verify the sources has the type we're migrating (or not if reverse)
	for _, si := range sourceShards {
		foundType := topo.IsTypeInList(servedType, si.ServedTypes)
		if reverse {
			if foundType {
				return fmt.Errorf("Source shard %v/%v is already serving type %v", si.Keyspace(), si.ShardName(), servedType)
			}
		} else {
			if !foundType {
				return fmt.Errorf("Source shard %v/%v is not serving type %v", si.Keyspace, si.ShardName(), servedType)
			}
		}

		if servedType == topo.TYPE_MASTER && len(si.ServedTypes) > 1 {
			return fmt.Errorf("Cannot migrate master out of %v/%v until everything else is migrated out", si.Keyspace(), si.ShardName())
		}
	}

	// Verify the destinations do not have the type we're
	// migrating (or do if reverse)
	for _, si := range destinationShards {
		foundType := topo.IsTypeInList(servedType, si.ServedTypes)
		if reverse {
			if !foundType {
				return fmt.Errorf("Destination shard %v/%v is not serving type %v", si.Keyspace, si.ShardName(), servedType)
			}
		} else {
			if foundType {
				return fmt.Errorf("Destination shard %v/%v is already serving type %v", si.Keyspace(), si.ShardName(), servedType)
			}
		}
	}

	// lock the shards: sources, then destinations
	// (note they're all ordered by shard name)
	actionNode := actionnode.MigrateServedTypes(servedType)
	sourceLockPath := make([]string, len(sourceShards))
	for i, si := range sourceShards {
		sourceLockPath[i], err = wr.lockShard(si.Keyspace(), si.ShardName(), actionNode)
		if err != nil {
			wr.Logger().Errorf("Failed to lock source shard %v/%v, may need to unlock other shards manually", si.Keyspace(), si.ShardName())
			return err
		}
	}
	destinationLockPath := make([]string, len(destinationShards))
	for i, si := range destinationShards {
		destinationLockPath[i], err = wr.lockShard(si.Keyspace(), si.ShardName(), actionNode)
		if err != nil {
			wr.Logger().Errorf("Failed to lock destination shard %v/%v, may need to unlock other shards manually", si.Keyspace(), si.ShardName())
			return err
		}
	}

	// record the action error and all unlock errors
	rec := concurrency.AllErrorRecorder{}

	// execute the migration
	shardCache := make(map[string]*topo.ShardInfo)
//.........这里部分代码省略.........

// MigrateServedTypes is used during horizontal splits to migrate a
// served type from a list of shards to another.
func (wr *Wrangler) MigrateServedTypes(ctx context.Context, keyspace, shard string, cells []string, servedType topodatapb.TabletType, reverse, skipReFreshState bool, filteredReplicationWaitTime time.Duration) (err error) {
	// check input parameters
	if servedType == topodatapb.TabletType_MASTER {
		// we cannot migrate a master back, since when master migration
		// is done, the source shards are dead
		if reverse {
			return fmt.Errorf("Cannot migrate master back to %v/%v", keyspace, shard)
		}
		// we cannot skip refresh state for a master
		if skipReFreshState {
			return fmt.Errorf("Cannot skip refresh state for master migration on %v/%v", keyspace, shard)
		}
	}

	// lock the keyspace
	ctx, unlock, lockErr := wr.ts.LockKeyspace(ctx, keyspace, fmt.Sprintf("MigrateServedTypes(%v)", servedType))
	if lockErr != nil {
		return lockErr
	}
	defer unlock(&err)

	// find overlapping shards in this keyspace
	wr.Logger().Infof("Finding the overlapping shards in keyspace %v", keyspace)
	osList, err := topotools.FindOverlappingShards(ctx, wr.ts, keyspace)
	if err != nil {
		return fmt.Errorf("FindOverlappingShards failed: %v", err)
	}

	// find our shard in there
	os := topotools.OverlappingShardsForShard(osList, shard)
	if os == nil {
		return fmt.Errorf("Shard %v is not involved in any overlapping shards", shard)
	}

	// find which list is which: the sources have no source
	// shards, the destination have source shards. We check the
	// first entry in the lists, then just check they're
	// consistent
	var sourceShards []*topo.ShardInfo
	var destinationShards []*topo.ShardInfo
	if len(os.Left[0].SourceShards) == 0 {
		if len(os.Right[0].SourceShards) == 0 {
			return fmt.Errorf("neither Shard '%v' nor Shard '%v' have a 'SourceShards' entry. Did you successfully run vtworker SplitClone before? Or did you already migrate the MASTER type?", os.Left[0].ShardName(), os.Right[0].ShardName())
		}
		sourceShards = os.Left
		destinationShards = os.Right
	} else {
		sourceShards = os.Right
		destinationShards = os.Left
	}

	// Verify the sources has the type we're migrating (or not if reverse)
	for _, si := range sourceShards {
		if err := si.CheckServedTypesMigration(servedType, cells, !reverse); err != nil {
			return err
		}
	}

	// Verify the destinations do not have the type we're
	// migrating (or do if reverse)
	for _, si := range destinationShards {
		if err := si.CheckServedTypesMigration(servedType, cells, reverse); err != nil {
			return err
		}
	}

	// execute the migration
	if err = wr.migrateServedTypesLocked(ctx, keyspace, sourceShards, destinationShards, cells, servedType, reverse, filteredReplicationWaitTime); err != nil {
		return err
	}

	// rebuild the keyspace serving graph now that there is no error
	if err = topotools.RebuildKeyspaceLocked(ctx, wr.logger, wr.ts, keyspace, cells); err != nil {
		return err
	}

	// Send a refresh to the tablets we just disabled, iff:
	// - we're not migrating a master
	// - we don't have any errors
	// - we're not told to skip the refresh
	if servedType != topodatapb.TabletType_MASTER && !skipReFreshState {
		rec := concurrency.AllErrorRecorder{}
		var refreshShards []*topo.ShardInfo
		if reverse {
			// For a backwards migration, we just disabled query service on the destination shards
			refreshShards = destinationShards
		} else {
			// For a forwards migration, we just disabled query service on the source shards
			refreshShards = sourceShards
		}

		// TODO(b/26388813): Integrate vtctl WaitForDrain here instead of just sleeping.
		var waitForDrainSleep time.Duration
		switch servedType {
		case topodatapb.TabletType_RDONLY:
			waitForDrainSleep = *waitForDrainSleepRdonly
		case topodatapb.TabletType_REPLICA:
			waitForDrainSleep = *waitForDrainSleepReplica
//.........这里部分代码省略.........