Python mosq_test.gen_connack函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› Python›Python编程经验

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Python中mosq_test.gen_connack函数的典型用法代码示例。如果您正苦于以下问题：Python gen_connack函数的具体用法？Python gen_connack怎么用？Python gen_connack使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了gen_connack函数的8个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Python代码示例。

示例1: pattern_test

def pattern_test(sub_topic, pub_topic):
    rc = 1
    keepalive = 60
    connect_packet = mosq_test.gen_connect("pattern-sub-test", keepalive=keepalive)
    connack_packet = mosq_test.gen_connack(rc=0)

    publish_packet = mosq_test.gen_publish(pub_topic, qos=0, payload="message")
    publish_retained_packet = mosq_test.gen_publish(pub_topic, qos=0, retain=True, payload="message")

    mid = 312
    subscribe_packet = mosq_test.gen_subscribe(mid, sub_topic, 0)
    suback_packet = mosq_test.gen_suback(mid, 0)

    mid = 234;
    unsubscribe_packet = mosq_test.gen_unsubscribe(mid, sub_topic)
    unsuback_packet = mosq_test.gen_unsuback(mid)

    broker = subprocess.Popen(['../../src/mosquitto', '-p', '1888'], stderr=subprocess.PIPE)

    try:
        time.sleep(0.5)

        sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
        sock.connect(("localhost", 1888))
        sock.settimeout(20)
        sock.send(connect_packet)

        if mosq_test.expect_packet(sock, "connack", connack_packet):
            sock.send(subscribe_packet)

            if mosq_test.expect_packet(sock, "suback", suback_packet):
                pub = subprocess.Popen(['./03-pattern-matching-helper.py', pub_topic])
                pub.wait()

                if mosq_test.expect_packet(sock, "publish", publish_packet):
                    sock.send(unsubscribe_packet)

                    if mosq_test.expect_packet(sock, "unsuback", unsuback_packet):
                        sock.send(subscribe_packet)

                        if mosq_test.expect_packet(sock, "suback", suback_packet):
                            if mosq_test.expect_packet(sock, "publish retained", publish_retained_packet):
                                rc = 0

        sock.close()
    finally:
        broker.terminate()
        broker.wait()
        if rc:
            (stdo, stde) = broker.communicate()
            print(stde)

    return rc

开发者ID:bingogh，项目名称:mosquitto，代码行数:53，代码来源:03-pattern-matching.py

示例2: pattern_test

def pattern_test(sub_topic, pub_topic):
    rc = 1
    keepalive = 60
    connect_packet = mosq_test.gen_connect("pattern-sub-test", keepalive=keepalive)
    connack_packet = mosq_test.gen_connack(rc=0)

    publish_packet = mosq_test.gen_publish(pub_topic, qos=0, payload="message")
    publish_retained_packet = mosq_test.gen_publish(pub_topic, qos=0, retain=True, payload="message")

    mid = 312
    subscribe_packet = mosq_test.gen_subscribe(mid, sub_topic, 0)
    suback_packet = mosq_test.gen_suback(mid, 0)

    mid = 234;
    unsubscribe_packet = mosq_test.gen_unsubscribe(mid, sub_topic)
    unsuback_packet = mosq_test.gen_unsuback(mid)

    port = mosq_test.get_port()
    broker = subprocess.Popen(['../../src/mosquitto', '-p', str(port)], stdout=subprocess.PIPE, stderr=subprocess.PIPE)

    try:
        time.sleep(0.5)

        sock = mosq_test.do_client_connect(connect_packet, connack_packet, timeout=20, port=port)
        sock.send(subscribe_packet)

        if mosq_test.expect_packet(sock, "suback", suback_packet):
            pub = subprocess.Popen(['./03-pattern-matching-helper.py', pub_topic, str(port)], stdout=subprocess.PIPE, stderr=subprocess.PIPE)
            pub.wait()
            (stdo, stde) = pub.communicate()

            if mosq_test.expect_packet(sock, "publish", publish_packet):
                sock.send(unsubscribe_packet)

                if mosq_test.expect_packet(sock, "unsuback", unsuback_packet):
                    sock.send(subscribe_packet)

                    if mosq_test.expect_packet(sock, "suback", suback_packet):
                        if mosq_test.expect_packet(sock, "publish retained", publish_retained_packet):
                            rc = 0

        sock.close()
    finally:
        broker.terminate()
        broker.wait()
        (stdo, stde) = broker.communicate()
        if rc:
            print(stde)
            print(stdo)
            raise

    return rc

开发者ID:PierreF，项目名称:mosquitto，代码行数:52，代码来源:03-pattern-matching.py

示例3: print

if sys.version < '2.7':
    print("WARNING: SSL not supported on Python 2.6")
    exit(0)

import inspect, os, sys
# From http://stackoverflow.com/questions/279237/python-import-a-module-from-a-folder
cmd_subfolder = os.path.realpath(os.path.abspath(os.path.join(os.path.split(inspect.getfile( inspect.currentframe() ))[0],"..")))
if cmd_subfolder not in sys.path:
    sys.path.insert(0, cmd_subfolder)

import mosq_test

rc = 1
keepalive = 10
connect_packet = mosq_test.gen_connect("connect-cert-test", keepalive=keepalive)
connack_packet = mosq_test.gen_connack(rc=0)

broker = mosq_test.start_broker(filename=os.path.basename(__file__), port=1889)

sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
ssock = ssl.wrap_socket(sock, ca_certs="../ssl/test-root-ca.crt", cert_reqs=ssl.CERT_REQUIRED)
ssock.settimeout(20)
try:
    ssock.connect(("localhost", 1888))
except ssl.SSLError as err:
    if err.errno == 1:
        rc = 0
except socket.error as err:
    if err.errno == errno.ECONNRESET:
        rc = 0

开发者ID:120991021，项目名称:mosquitto，代码行数:30，代码来源:08-ssl-connect-cert-auth-without.py

示例4:

import inspect, os, sys
# From http://stackoverflow.com/questions/279237/python-import-a-module-from-a-folder
cmd_subfolder = os.path.realpath(os.path.abspath(os.path.join(os.path.split(inspect.getfile( inspect.currentframe() ))[0],"..")))
if cmd_subfolder not in sys.path:
    sys.path.insert(0, cmd_subfolder)

import mosq_test

port = mosq_test.get_port()

rc = 1
mid = 3265
keepalive = 60
connect_packet = mosq_test.gen_connect("pub-qos1-disco-test", keepalive=keepalive, clean_session=False)
connack1_packet = mosq_test.gen_connack(resv=0, rc=0)
connack2_packet = mosq_test.gen_connack(resv=1, rc=0)

subscribe_packet = mosq_test.gen_subscribe(mid, "qos1/disconnect/test", 1)
suback_packet = mosq_test.gen_suback(mid, 1)

mid = 1
publish_packet = mosq_test.gen_publish("qos1/disconnect/test", qos=1, mid=mid, payload="disconnect-message")
publish_dup_packet = mosq_test.gen_publish("qos1/disconnect/test", qos=1, mid=mid, payload="disconnect-message", dup=True)
puback_packet = mosq_test.gen_puback(mid)

mid = 3266
publish2_packet = mosq_test.gen_publish("qos1/outgoing", qos=1, mid=mid, payload="outgoing-message")
puback2_packet = mosq_test.gen_puback(mid)

broker = mosq_test.start_broker(filename=os.path.basename(__file__), port=port)

开发者ID:physycom，项目名称:mosquitto，代码行数:30，代码来源:03-publish-b2c-disconnect-qos1.py

示例5:

# Test what the broker does if receiving a PUBREC in response to a QoS 1 PUBLISH.

import inspect, os, sys
# From http://stackoverflow.com/questions/279237/python-import-a-module-from-a-folder
cmd_subfolder = os.path.realpath(os.path.abspath(os.path.join(os.path.split(inspect.getfile( inspect.currentframe() ))[0],"..")))
if cmd_subfolder not in sys.path:
    sys.path.insert(0, cmd_subfolder)

import mosq_test
import time

rc = 1
keepalive = 60

connect_packet = mosq_test.gen_connect("subpub-qos1-test", keepalive=keepalive)
connack_packet = mosq_test.gen_connack(rc=0)

mid = 1
subscribe_packet = mosq_test.gen_subscribe(mid, "subpub/qos1", 1)
suback_packet = mosq_test.gen_suback(mid, 1)

helper_connect = mosq_test.gen_connect("helper", keepalive=keepalive)
helper_connack = mosq_test.gen_connack(rc=0)

mid = 1
publish1s_packet = mosq_test.gen_publish("subpub/qos1", qos=1, mid=mid, payload="message")
puback1s_packet = mosq_test.gen_puback(mid)

mid = 1
publish1r_packet = mosq_test.gen_publish("subpub/qos1", qos=1, mid=mid, payload="message")
pubrec1r_packet = mosq_test.gen_pubrec(mid)

开发者ID:physycom，项目名称:mosquitto，代码行数:31，代码来源:02-subpub-qos1-bad-pubrec.py

示例6:

# sub does not receive the message


import inspect, os, sys
# From http://stackoverflow.com/questions/279237/python-import-a-module-from-a-folder
cmd_subfolder = os.path.realpath(os.path.abspath(os.path.join(os.path.split(inspect.getfile( inspect.currentframe() ))[0],"..")))
if cmd_subfolder not in sys.path:
    sys.path.insert(0, cmd_subfolder)

import mosq_test

rc = 1
keepalive = 60
connect_packet_sub_persistent = mosq_test.gen_connect("flipflop-test", keepalive=keepalive, clean_session=False)
connect_packet_sub_clean = mosq_test.gen_connect("flipflop-test", keepalive=keepalive, clean_session=True)
connack_packet_sub = mosq_test.gen_connack(rc=0)

connect_packet_pub = mosq_test.gen_connect("flipflop-test-pub", keepalive=keepalive)
connack_packet_pub = mosq_test.gen_connack(rc=0)

mid=1
subscribe_packet = mosq_test.gen_subscribe(mid, "flipflop/test", 1)
suback_packet = mosq_test.gen_suback(mid, 1)

mid=1
publish_packet = mosq_test.gen_publish("flipflop/test", qos=1, mid=mid, payload="message")
puback_packet = mosq_test.gen_puback(mid)


port = mosq_test.get_port()
broker = mosq_test.start_broker(filename=os.path.basename(__file__), port=port)

开发者ID:physycom，项目名称:mosquitto，代码行数:31，代码来源:02-subscribe-persistence-flipflop.py

示例7:

import socket
import time

import inspect, os, sys
# From http://stackoverflow.com/questions/279237/python-import-a-module-from-a-folder
cmd_subfolder = os.path.realpath(os.path.abspath(os.path.join(os.path.split(inspect.getfile( inspect.currentframe() ))[0],"..")))
if cmd_subfolder not in sys.path:
    sys.path.insert(0, cmd_subfolder)

import mosq_test

rc = 1
mid = 53
keepalive = 60
connect_packet_ok = mosq_test.gen_connect("will-acl-test", keepalive=keepalive, will_topic="ok", will_payload="should be ok")
connack_packet_ok = mosq_test.gen_connack(rc=0)

connect_packet = mosq_test.gen_connect("will-acl-test", keepalive=keepalive, will_topic="will/acl/test", will_payload="should be denied")
connack_packet = mosq_test.gen_connack(rc=5)

broker = subprocess.Popen(['../../src/mosquitto', '-c', '07-will-acl-denied.conf'], stderr=subprocess.PIPE)

try:
    time.sleep(0.5)

    sock_ok = mosq_test.do_client_connect(connect_packet_ok, connack_packet_ok, timeout=5, connack_error="connack ok")
    sock = mosq_test.do_client_connect(connect_packet, connack_packet)
    rc = 0
    sock.close()
    sock_ok.close()
finally:

开发者ID:Allanceng，项目名称:mosquitto-new，代码行数:31，代码来源:07-will-acl-denied.py

示例8: open

    with open(filename, 'w') as f:
        f.write("port %d\n" % (port))
        f.write("persistence true\n")
        f.write("persistence_file mosquitto-%d.db\n" % (port))

port = mosq_test.get_port()
conf_file = os.path.basename(__file__).replace('.py', '.conf')
write_config(conf_file, port)

rc = 1
mid = 530
keepalive = 60
connect_packet = mosq_test.gen_connect(
    "persitent-subscription-test", keepalive=keepalive, clean_session=False,
)
connack_packet = mosq_test.gen_connack(rc=0)
connack_packet2 = mosq_test.gen_connack(rc=0, resv=1)  # session present

subscribe_packet = mosq_test.gen_subscribe(mid, "subpub/qos1", 1)
suback_packet = mosq_test.gen_suback(mid, 1)

mid = 300
publish_packet = mosq_test.gen_publish("subpub/qos1", qos=1, mid=mid, payload="message")
puback_packet = mosq_test.gen_puback(mid)

mid = 1
publish_packet2 = mosq_test.gen_publish("subpub/qos1", qos=1, mid=mid, payload="message")

if os.path.exists('mosquitto-%d.db' % (port)):
    os.unlink('mosquitto-%d.db' % (port))

开发者ID:PierreF，项目名称:mosquitto，代码行数:30，代码来源:11-persistent-subscription.py

注：本文中的mosq_test.gen_connack函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

Python mosq_test.gen_connect函数代码示例发布时间：2022-05-27

Python mosq_test.expect_packet函数代码示例发布时间：2022-05-27

Python util.grid_equal函数代码示例

1 Python 入门教程

Python入门教程 Python 是一种解释型、面向对象、动态数据类型的高级程序设计语言。 P

阅读：13804|2022-01-22

2 Python wikiutil.getFrontPage函数代码示例

Python wikiutil.getFrontPage函数代码示例

阅读：10190|2022-05-24

3 Python 简介

Python 简介 Python 是一个高层次的结合了解释性、编译性、互动性和面向对象的脚本

阅读：4086|2022-01-22

4 Python tests.group函数代码示例

Python tests.group函数代码示例

阅读：4042|2022-05-27

5 Python util.check_if_user_has_permission

Python util.check_if_user_has_permission函数代码示例

阅读：3842|2022-05-27

6 Python 操练实例98

Python 练习实例98 Python 100例题目：从键盘输入一个字符串，将小写字母全部转换成大

阅读：3510|2022-01-22

7 Python 环境搭建

Python 环境搭建本章节我们将向大家介绍如何在本地搭建 Python 开发环境。 Py

阅读：3030|2022-01-22

8 Python output.darkgreen函数代码示例

Python output.darkgreen函数代码示例

阅读：2653|2022-05-25

9 Python 基础语法

Python 基础语法 Python 语言与 Perl，C 和 Java 等语言有许多相似之处。但是，也

阅读：2646|2022-01-22

10 Python 中文编码

Python 中文编码前面章节中我们已经学会了如何用 Python 输出 Hello, World!，英文没

阅读：2302|2022-01-22

客服电话

电子邮件

Python mosq_test.gen_connack函数代码示例

示例1: pattern_test

示例2: pattern_test

示例3: print

示例4:

示例5:

示例6:

示例7:

示例8: open

请发表评论

全部评论

上一篇：

下一篇：

Python util.grid_equal函数代码示例

Python util.get_worker_name函数代码示例

Python util.get_webmention_target函数代

Python util.get_uuid函数代码示例

Python util.get_type_by_name函数代码示例

Python util.grid_equal函数代码示例

Python util.get_worker_name函数代码示例

Python util.get_webmention_target函数代

Python util.get_uuid函数代码示例

Python util.get_type_by_name函数代码示例

Python util.get_stdout函数代码示例

关于我们

产品与服务

解决方案

139-2527-9053