Python myTools.sectionEndTimeStamp函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› Python›Python编程经验

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Python中myTools.sectionEndTimeStamp函数的典型用法代码示例。如果您正苦于以下问题：Python sectionEndTimeStamp函数的具体用法？Python sectionEndTimeStamp怎么用？Python sectionEndTimeStamp使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了sectionEndTimeStamp函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Python代码示例。

示例1: fCreate_Discounts

def fCreate_Discounts(pMonth):
#---------------------------------------------------#

    myTools.sectionStartTimeStamp("discounts" + str(pMonth))
    logging.debug('fCreate_Discounts: ' + str(pMonth))

    # list the client that will get a refund each month
    discountClients = ["Natick","Orange","Oakham","Oak Bluffs","Southampton","Otis","Oxford","Leyden","Monroe","Monson","Methuen","Uxbridge"]
    oneClient = discountClients[(pMonth - 1)]

    myTools.getFocus()

    # open a/r tran list
    type("t",KeyModifier.CTRL)
    myTools.waitForTransList()

    discountAmount = 49 + pMonth/float(100)
    fCreate_OneDiscount(oneClient,pMonth,discountAmount)

    type(Key.F4,KeyModifier.CTRL)
    time.sleep(1) 
    type(Key.F4,KeyModifier.CTRL)
    
    myTools.sectionEndTimeStamp()
    myTools.checkProcesses()

开发者ID:gh-tomhinds，项目名称:ConfirmDataEntry，代码行数:25，代码来源:trans_Discounts.py

示例2: fStartTS_CreateNewDB

def fStartTS_CreateNewDB():
#---------------------------------------------------#
    """
    main driver
    - calls fDelete_DataFolder, fStart_TS, fCheckFor_PEP, 
    - calls fEnter_NewDBWizard, fEnter_GeneralSettings, fEnter_GettingStartedWizard
    - makes backup "-new"
    """    

    myTools.sectionStartTimeStamp("new db")    
    logging.debug('StartTS_CreateNewDB')

    popup("make sure Timeslips is closed")

    fDelete_DataFolder()
    fStart_TS()
    fCheckFor_PEP()
    fEnter_NewDBWizard()
    fEnter_GeneralSettings()
    fEnter_GettingStartedWizard()

# backup
    time.sleep(1)
    if exists("backup_database.png"):
        click("no_btn.png")
        time.sleep(1)
        type("n")

    fCheckFor_BillingDate()
    fCheckFor_SPS()
    fCheckFor_PEP()  
    
    myTools.sectionEndTimeStamp()
    backup_Data.fBackup_Checkpoint("new")

开发者ID:gh-tomhinds，项目名称:Test_It_All，代码行数:34，代码来源:db_New.py

示例3: fCreate_Categories

def fCreate_Categories():
    # ---------------------------------------------------#

    myTools.sectionStartTimeStamp("categories")

    logging.debug("fCreate_Categories")

    # make sure timeslips has focus
    myTools.getFocus()

    logging.debug("- open category list")
    type("p", KeyModifier.ALT)

    # hot keys changed for TS2014
    if int(Settings.tsVersion) < 2014:
        type("i")
    else:
        type("o")
    time.sleep(1)

    for category in ["Construction", "General", "Landscape", "Hardware", "Supplies", "Materials", "Other"]:
        logging.debug("-- create: " + category)
        type("n", KeyModifier.ALT)
        type(category)
        type(Key.ENTER)

    logging.debug("- close list")
    myTools.pressTAB(4)
    type(Key.ENTER)

    myTools.sectionEndTimeStamp()

开发者ID:gh-tomhinds，项目名称:Test_It_All，代码行数:31，代码来源:settings_Categories.py

示例4: fCreate_FinanceCharges

def fCreate_FinanceCharges(pMonth):
#---------------------------------------------------#

    myTools.sectionStartTimeStamp("finance" + str(pMonth))
    logging.debug('Create_FinanceCharges: ' + str(pMonth))

    allClients = names_Init.fInit_Clients()
    count = 0

    myTools.getFocus()

    # client list
    type("i",KeyModifier.CTRL)

    for oneClient in allClients:
        count += 1
        
        # always create finance charge for first 5 clients 
        # then create finance charge for 1 out of 35 next clients
        
        if (count in range(6)) or ((count + pMonth) % 35 == 0):
            financeCharge = str(count) + ".99"            
            fCreate_OneFinanceCharge(oneClient,count,pMonth,financeCharge)
        else:
            logging.debug('-- skip: ' + str(pMonth) + "-" + oneClient)

    type(Key.F4,KeyModifier.CTRL)
    myTools.sectionEndTimeStamp()

开发者ID:gh-tomhinds，项目名称:ConfirmDataEntry，代码行数:28，代码来源:client_FinanceCharges.py

示例5: fCreate_Writeoffs

def fCreate_Writeoffs(pMonth):
#---------------------------------------------------#

    myTools.sectionStartTimeStamp("writeoffs" + str(pMonth))
    logging.debug('Create_Writeoffs: ' + str(pMonth))

    count = 0

    myTools.getFocus()

    # open a/r tran list
    type("t",KeyModifier.CTRL)
    myTools.waitForTransList()

    clientList = ["Blackstone","Carver"]
    for woClient in clientList:    
        count += 1
        if woClient == "Blackstone":
            woAmount = 2
        else:
            woAmount = 3
            
        woAmount = woAmount + pMonth/float(100)            
        fCreate_OneWriteOff(woClient,count,pMonth,woAmount)

    type(Key.F4,KeyModifier.CTRL)
    time.sleep(1) 
    type(Key.F4,KeyModifier.CTRL)
    
    myTools.sectionEndTimeStamp()
    myTools.checkProcesses()

开发者ID:gh-tomhinds，项目名称:Test_It_All，代码行数:31，代码来源:trans_Writeoff.py

示例6: fCreate_ReplacementSlips

def fCreate_ReplacementSlips(pReplClient):
    # ---------------------------------------------------#

    myTools.sectionStartTimeStamp("replacement slips")
    logging.debug("fCreate_ReplacementSlips")

    type("m", KeyModifier.CTRL)
    time.sleep(1)

    # create some time slips
    slips_Create.Create_OneSlip("t", "TomH", "gen004", pReplClient, 1)  # override - General
    slips_Create.Create_OneSlip("t", "CoreyM", "gen005", pReplClient, 2)  # donotbill - General
    slips_Create.Create_OneSlip("t", "SamS", "lnd011", pReplClient, 3)  # billable - Landscape
    slips_Create.Create_OneSlip("t", "ShawnR", "lnd010", pReplClient, 4)  # nocharge - Landscape
    slips_Create.Create_OneSlip("t", "JamesR", "lnd011", pReplClient, 5)  # billable - Landscape

    # create some expense slips
    slips_Create.Create_OneSlip("e", "ShawnR", "e006", pReplClient, 6)  # donotbill - Supplies
    slips_Create.Create_OneSlip("e", "SamS", "e009", pReplClient, 7)  # billable - Supplies
    slips_Create.Create_OneSlip("e", "CoreyM", "e003", pReplClient, 8)  # nocharge - Supplies
    slips_Create.Create_OneSlip("e", "TomH", "e008", pReplClient, 9)  # override - Supplies
    slips_Create.Create_OneSlip("e", "JamesR", "e010", pReplClient, 10)  # billable - Other

    type(Key.F4, KeyModifier.CTRL)
    time.sleep(1)
    type(Key.F4, KeyModifier.CTRL)

    myTools.sectionEndTimeStamp()

开发者ID:gh-tomhinds，项目名称:Test_It_All，代码行数:28，代码来源:slips_ReplacementSlips.py

示例7: fEdit_Client

def fEdit_Client():
#---------------------------------------------------#

    myTools.sectionStartTimeStamp("edit client")
    logging.debug('Edit_Client')

    # make sure timeslips has focus
    myTools.getFocus()

    fEdit_CliGenInfo()
    fEdit_CliCustom()
    fEdit_CliRatesNotes()

    logging.debug('- save')
    type("s",KeyModifier.CTRL)
    time.sleep(1)

    fEdit_DefaultRates()
    fEdit_InterestSetting()

    type(Key.F4,KeyModifier.CTRL)
    time.sleep(1) 
    type(Key.F4,KeyModifier.CTRL)

    myTools.sectionEndTimeStamp()

开发者ID:gh-tomhinds，项目名称:ConfirmDataEntry，代码行数:25，代码来源:client_Edit.py

示例8: fPrecision_Setup

def fPrecision_Setup():
    # - - - - - - - - - - - - - - - - - - - - - - - - - #

    myTools.sectionStartTimeStamp("ba Precision")
    logging.debug("ba Precision")

    # open client
    type("i", KeyModifier.CTRL)
    time.sleep(1)
    type("BA-Precision")
    type(Key.ENTER)
    time.sleep(1)

    # get to Rounding field
    if int(Settings.tsVersion) < 2015:
        myTools.pressF6(4)
        time.sleep(1)
        myTools.pressTAB(8)
    else:
        myTools.pressF6(7)
        time.sleep(1)
        myTools.pressTAB(7)

    time.sleep(1)
    type(Key.UP)

    # save and close
    type("s", KeyModifier.CTRL)

    type(Key.F4, KeyModifier.CTRL)
    time.sleep(1)
    type(Key.F4, KeyModifier.CTRL)

    myTools.sectionEndTimeStamp()

开发者ID:gh-tomhinds，项目名称:Test_It_All，代码行数:34，代码来源:ba_Precision.py

示例9: fProgressTotal_Setup1

def fProgressTotal_Setup1():
    # - - - - - - - - - - - - - - - - - - - - - - - - - #

    myTools.sectionStartTimeStamp("ba ProgressTot1")
    logging.debug("ba ProgressTot1")

    # open client
    type("i", KeyModifier.CTRL)
    time.sleep(1)
    type("BA-ProgressTot")
    type(Key.ENTER)
    time.sleep(1)

    # get to arrangement field for time
    ba__Common.fMoveto_BAPage()
    myTools.pressTAB(4)

    # switch to minimum
    type(Key.HOME)
    myTools.pressDOWN(11)
    # enter details
    type(Key.TAB)
    type(Key.ENTER)
    time.sleep(1)
    type("500")
    time.sleep(1)
    type(Key.ENTER)
    # save and close
    type("s", KeyModifier.CTRL)

    type(Key.F4, KeyModifier.CTRL)
    time.sleep(1)
    type(Key.F4, KEY_CTRL)

    myTools.sectionEndTimeStamp()

开发者ID:gh-tomhinds，项目名称:Test_It_All，代码行数:35，代码来源:ba_ProgressTotal.py

示例10: fCreate_BASlips

def fCreate_BASlips(pBAClient):
    # ---------------------------------------------------#
    """
    calls slips_Create.Create_OneSlip to create 4 time slips and 4 expense slips
    for each billing arrangement bill
    """

    myTools.sectionStartTimeStamp("ba slips")
    logging.debug("fCreate_BASlips")

    type("m", KeyModifier.CTRL)
    time.sleep(1)

    # create some time slips
    slips_Create.Create_OneSlip("t", "TomH", "con001", pBAClient, 1)
    slips_Create.Create_OneSlip("t", "CoreyM", "gen004", pBAClient, 2)
    slips_Create.Create_OneSlip("t", "SamS", "gen005", pBAClient, 3)
    slips_Create.Create_OneSlip("t", "ShawnR", "lnd010", pBAClient, 4)

    # create some expense slips
    slips_Create.Create_OneSlip("e", "ShawnR", "e004", pBAClient, 5)
    slips_Create.Create_OneSlip("e", "SamS", "e005", pBAClient, 6)
    slips_Create.Create_OneSlip("e", "CoreyM", "e006", pBAClient, 7)
    slips_Create.Create_OneSlip("e", "TomH", "e003", pBAClient, 8)

    type(Key.F4, KeyModifier.CTRL)
    time.sleep(1)
    type(Key.F4, KeyModifier.CTRL)

    myTools.sectionEndTimeStamp()

开发者ID:gh-tomhinds，项目名称:Test_It_All，代码行数:30，代码来源:ba__Common.py

示例11: fPrint_BABill

def fPrint_BABill(pBAClient, pBillNum):
    # ---------------------------------------------------#
    """
    backs up the database ("-before")
    prints the bill to text file
    approves the bill
    backs up the database ("-after")
    """

    baBillName = pBAClient + str(pBillNum)
    backup_Data.fBackup_Checkpoint(baBillName + "-before")

    myTools.sectionStartTimeStamp("ba bill")
    logging.debug("BA_Bill: " + baBillName)

    type("b", KeyModifier.CTRL)
    time.sleep(1)
    click("remove_filters.png")
    time.sleep(1)
    type(Key.ENTER)
    type(Key.DOWN)
    type(Key.TAB)
    type(Key.SPACE)
    type(pBAClient)
    time.sleep(1)
    type(Key.F4)
    type(Key.ENTER)

    myTools.pressSHIFTTAB(3)

    type("t")
    type(Key.ENTER)
    time.sleep(1)
    type(Settings.repFolder + "\\" + baBillName + ".txt")

    #    for checkmark in findAll("checkmark.png"):
    #        click(checkmark)

    time.sleep(1)
    type(Key.ENTER)
    time.sleep(1)

    if exists("replace_msg.png"):
        type(Key.ENTER)
        time.sleep(1)

    wait("approve_bill.png", FOREVER)
    click("approve_bill.png")
    type(Key.ENTER)
    time.sleep(1)

    if exists("select_report_to_print.png"):
        type(Key.ESC)

    type(Key.F4, KeyModifier.CTRL)
    time.sleep(1)
    type("n")

    myTools.sectionEndTimeStamp()
    backup_Data.fBackup_Checkpoint(baBillName + "-after")

开发者ID:gh-tomhinds，项目名称:Test_It_All，代码行数:60，代码来源:ba__Common.py

示例12: fBill_BillFields

def fBill_BillFields():
#---------------------------------------------------#

    myTools.sectionStartTimeStamp("bill fields")
    logging.debug("fBill_BillFields")    

    buName = Settings.tsVersion + "-bill-12b"
    backup_Data.fRestore_Backup(buName)

    reportName = "BillFields-13-" + Settings.tsVersion + ".txt"

    myTools.getFocus()                                # make sure timeslips has focus

    if int(Settings.tsVersion) < 2016:                # to get around a defect in pre-2016
        type("i",KeyModifier.CTRL)                    # open client info and close it to load custom fields
        time.sleep(1)
        type("o",KeyModifier.CTRL)
        time.sleep(1)
        type(Key.F4,KeyModifier.CTRL)
        time.sleep(1)
        type(Key.F4,KeyModifier.CTRL)
    
    bill_ImportLayout.fImport_BillLayout("Fields")    # import the layout    
    fSet_BillDate(12)                                 # set billing data to 12/27 for text bills 
    fPrint_BillsToText(reportName)                    # print all bills to one text file
    reports_Compare.Compare_OneReport(reportName)

    myTools.sectionEndTimeStamp()

开发者ID:gh-tomhinds，项目名称:Test_It_All，代码行数:28，代码来源:bill_BillFields.py

示例13: fCreate_PaymentsToAccount

def fCreate_PaymentsToAccount(pMonth):
#---------------------------------------------------#

    myTools.sectionStartTimeStamp("paystoaccount" + str(pMonth))
    logging.debug('Create_PaysToAccount: ' + str(pMonth))

    allClients = names_Init.fInit_Clients()
    count = 0

    myTools.getFocus()

    # open funds list
    type("f",KeyModifier.CTRL)
    myTools.waitForFundsList()    

    # create PTA for first 5 clients and then every 6th client

    for oneClient in allClients:
        count += 1
        if (count in range(6)) or ((count + pMonth) % 6 == 0):
            ptaAmount = 25 + pMonth/float(100)
            fCreate_OnePayToAccount(oneClient,count,pMonth,ptaAmount)
        else:
            logging.debug('-- skip: ' + str(pMonth) + "-" + oneClient)           
     
    type(Key.F4,KeyModifier.CTRL)
    time.sleep(1) 
    type(Key.F4,KeyModifier.CTRL)
    
    myTools.sectionEndTimeStamp()
    myTools.checkProcesses()

开发者ID:gh-tomhinds，项目名称:ConfirmDataEntry，代码行数:31，代码来源:trans_PaymentsToAccount.py

示例14: fCreate_Transfers

def fCreate_Transfers(pMonth):
#---------------------------------------------------#

    myTools.sectionStartTimeStamp("transfers" + str(pMonth))
    logging.debug('Create_Transfers: ' + str(pMonth))

    allClients = ["East.Bridgewater","North.Adams","West.Boylston"]
    count = 0

    myTools.getFocus()

    # open a/r tran list
    type("t",KeyModifier.CTRL)
    myTools.waitForTransList()

    for oneClient in allClients:
        count += 1
        transferAmount = 10 + int(count) + pMonth/float(100)        
        fCreate_OneTransfer(oneClient,count,pMonth,transferAmount)

    type(Key.F4,KeyModifier.CTRL)
    time.sleep(1) 
    type(Key.F4,KeyModifier.CTRL)
    
    myTools.sectionEndTimeStamp()
    myTools.checkProcesses()

开发者ID:gh-tomhinds，项目名称:Test_It_All，代码行数:26，代码来源:trans_Transfers.py

示例15: fContingencyExp_Setup2

def fContingencyExp_Setup2(pBAClient):
#---------------------------------------------------#

    myTools.sectionStartTimeStamp(pBAClient + "2")
    logging.debug(pBAClient + "2")

# open client
    myTools.openClient(pBAClient)

# get to arrangement field for exp
    ba__Common.fMoveto_BAPage()
    myTools.pressTAB(6)
    
# enter details    
    type(Key.ENTER)
    time.sleep(1)
    
#    if int(Settings.tsVersion) > 2014:
#        myTools.pressTAB(1)
#    else:
    myTools.pressTAB(2)
    
    type(Key.DOWN)
    
# save and close    
    type(Key.ENTER)
    type("s",KeyModifier.CTRL)
    
    type(Key.F4,KeyModifier.CTRL)
    time.sleep(1)
    type(Key.F4,KeyModifier.CTRL)

    myTools.sectionEndTimeStamp()

开发者ID:gh-tomhinds，项目名称:ConfirmDataEntry，代码行数:33，代码来源:ba_Contingency_Exp.py

示例16: fPrint_SlipFields

def fPrint_SlipFields(pReportMonth,pRepExt):
#---------------------------------------------------#

    # this does not include applied fields, since we fixed some stuff in ts2016

    myTools.sectionStartTimeStamp("print slipfields")

    # name report file: ex: UDSlip1-03
    reportName = myTools.buildRepName("UDSlip2",pRepExt)
    logging.debug('Print_UDSlip2: ' + reportName)
    myTools.getFocus()

    logging.debug('- open report list')
    type("r",KeyModifier.ALT)
    type("s")
    time.sleep(1)

    logging.debug('- choose report')
    type("UDS SlipFields")
    time.sleep(1)

#    fSort_SlipReportFields()
    fChoose_CSV_Print(reportName)
    myTools.waitForReport()
    reports_Compare.Compare_OneReport(reportName)

    # close the report
    type(Key.F4,KeyModifier.CTRL)
    time.sleep(1)
    type("n")
    type(Key.F4,KeyModifier.CTRL)

    myTools.sectionEndTimeStamp()

开发者ID:gh-tomhinds，项目名称:Test_It_All，代码行数:33，代码来源:report_UDSlip.py

示例17: fCreate_Refunds

def fCreate_Refunds(pMonth):
#---------------------------------------------------#

    myTools.sectionStartTimeStamp("refunds" + str(pMonth))
    logging.debug('fCreate_Refunds: ' + str(pMonth))

    # list the client that will get a refund each month
    refundClients = ["Hawley","Haverhill","Hatfield","Harwich","Harvard","Hawley","Haverhill","Hatfield","Harwich","Harvard","Hawley","Haverhill"]
    oneClient = refundClients[(pMonth - 1)]

    myTools.getFocus()

    # open a/r tran list
    type("t",KeyModifier.CTRL)
    myTools.waitForTransList()

    refundAmount = 99 + pMonth/float(100)        
    fCreate_OneRefund(oneClient,pMonth,refundAmount)

    type(Key.F4,KeyModifier.CTRL)
    time.sleep(1) 
    type(Key.F4,KeyModifier.CTRL)
    
    myTools.sectionEndTimeStamp()
    myTools.checkProcesses()

开发者ID:gh-tomhinds，项目名称:Test_It_All，代码行数:25，代码来源:trans_Refunds.py

示例18: fPrint_SlipListCalc

def fPrint_SlipListCalc(pReportMonth,pRepExt):
#---------------------------------------------------#

    myTools.sectionStartTimeStamp("print slipcalcs")

    # name report file: ex: UDSlip1-03
    reportName = myTools.buildRepName("UDSCalc",pRepExt)
    logging.debug('Print_UDSCalc: ' + reportName)
    myTools.getFocus()

    logging.debug('- open report list')
    type("r",KeyModifier.ALT)
    type("s")
    time.sleep(1)

    logging.debug('- choose report')
    type("uds c")
    time.sleep(1)

#    fSort_SlipReportFields()
    fChoose_CSV_Print(reportName)
    myTools.waitForReport()
    reports_Compare.Compare_OneReport(reportName)

    # close the report
    type(Key.F4,KeyModifier.CTRL)
    time.sleep(1)
    type("n")
    type(Key.F4,KeyModifier.CTRL)

    myTools.sectionEndTimeStamp()

开发者ID:gh-tomhinds，项目名称:Test_It_All，代码行数:31，代码来源:report_UDSlip.py

示例19: fProgressTotal_Setup3

def fProgressTotal_Setup3():
    # - - - - - - - - - - - - - - - - - - - - - - - - - #

    myTools.sectionStartTimeStamp("ba ProgressTot3")
    logging.debug("ba ProgressTot3")

    # open client
    type("i", KeyModifier.CTRL)
    time.sleep(1)
    type("BA-ProgressTot")
    type(Key.ENTER)
    time.sleep(1)

    # get to arrangement field for time
    ba__Common.fMoveto_BAPage()
    myTools.pressTAB(5)

    # enter details
    type(Key.ENTER)
    time.sleep(1)
    type("700")
    time.sleep(1)

    type("u", KeyModifier.ALT)
    type(Key.END)
    type(Key.ENTER)

    # save and close
    type("s", KeyModifier.CTRL)

    type(Key.F4, KeyModifier.CTRL)
    time.sleep(1)
    type(Key.F4, KeyModifier.CTRL)

    myTools.sectionEndTimeStamp()

开发者ID:gh-tomhinds，项目名称:Test_It_All，代码行数:35，代码来源:ba_ProgressTotal.py

示例20: fSetup_ClientHold

def fSetup_ClientHold():
#---------------------------------------------------#

    myTools.sectionStartTimeStamp("set up client hold")
    logging.debug('set up client hold')

    # make sure timeslips has focus
    myTools.getFocus()

    logging.debug('- open client list')
    type("n",KeyModifier.ALT)
    type("i")
    time.sleep(1)

    fHold_Time_NextBill_Hours()
    fHold_Exp_AllBills_Amount()
    fHold_Bill_AllBills_AmountAndHours()
    fHold_AR_AllBills()

    time.sleep(1)
    type(Key.F4,KeyModifier.CTRL)
    time.sleep(1) 
    type(Key.F4,KeyModifier.CTRL)

    myTools.sectionEndTimeStamp()

开发者ID:gh-tomhinds，项目名称:ConfirmDataEntry，代码行数:25，代码来源:client_Hold.py

注：本文中的myTools.sectionEndTimeStamp函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

Python myTools.sectionStartTimeStamp函数代码示例发布时间：2022-05-27

Python myTools.pressTAB函数代码示例发布时间：2022-05-27

Python util.grid_equal函数代码示例

1 Python 入门教程

Python入门教程 Python 是一种解释型、面向对象、动态数据类型的高级程序设计语言。 P

阅读：13804|2022-01-22

2 Python wikiutil.getFrontPage函数代码示例

Python wikiutil.getFrontPage函数代码示例

阅读：10190|2022-05-24

3 Python 简介

Python 简介 Python 是一个高层次的结合了解释性、编译性、互动性和面向对象的脚本

阅读：4086|2022-01-22

4 Python tests.group函数代码示例

Python tests.group函数代码示例

阅读：4042|2022-05-27

5 Python util.check_if_user_has_permission

Python util.check_if_user_has_permission函数代码示例

阅读：3843|2022-05-27

6 Python 操练实例98

Python 练习实例98 Python 100例题目：从键盘输入一个字符串，将小写字母全部转换成大

阅读：3510|2022-01-22

7 Python 环境搭建

Python 环境搭建本章节我们将向大家介绍如何在本地搭建 Python 开发环境。 Py

阅读：3030|2022-01-22

8 Python output.darkgreen函数代码示例

Python output.darkgreen函数代码示例

阅读：2653|2022-05-25

9 Python 基础语法

Python 基础语法 Python 语言与 Perl，C 和 Java 等语言有许多相似之处。但是，也

阅读：2647|2022-01-22

10 Python 中文编码

Python 中文编码前面章节中我们已经学会了如何用 Python 输出 Hello, World!，英文没

阅读：2302|2022-01-22

客服电话

电子邮件

Python myTools.sectionEndTimeStamp函数代码示例

示例1: fCreate_Discounts

示例2: fStartTS_CreateNewDB

示例3: fCreate_Categories

示例4: fCreate_FinanceCharges

示例5: fCreate_Writeoffs

示例6: fCreate_ReplacementSlips

示例7: fEdit_Client

示例8: fPrecision_Setup

示例9: fProgressTotal_Setup1

示例10: fCreate_BASlips

示例11: fPrint_BABill

示例12: fBill_BillFields

示例13: fCreate_PaymentsToAccount

示例14: fCreate_Transfers

示例15: fContingencyExp_Setup2

示例16: fPrint_SlipFields

示例17: fCreate_Refunds

示例18: fPrint_SlipListCalc

示例19: fProgressTotal_Setup3

示例20: fSetup_ClientHold

请发表评论

全部评论

上一篇：

下一篇：

Python util.grid_equal函数代码示例

Python util.get_worker_name函数代码示例

Python util.get_webmention_target函数代

Python util.get_uuid函数代码示例

Python util.get_type_by_name函数代码示例

Python util.grid_equal函数代码示例

Python util.get_worker_name函数代码示例

Python util.get_webmention_target函数代

Python util.get_uuid函数代码示例

Python util.get_type_by_name函数代码示例

Python util.get_stdout函数代码示例

关于我们

产品与服务

解决方案

139-2527-9053