本文整理汇总了Python中netmiko.Netmiko类的典型用法代码示例。如果您正苦于以下问题:Python Netmiko类的具体用法?Python Netmiko怎么用?Python Netmiko使用的例子?那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。
在下文中一共展示了Netmiko类的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的Python代码示例。
示例1: getpass
#!/usr/bin/env python
from netmiko import Netmiko
from getpass import getpass
nxos1 = {
'host': 'nxos1.twb-tech.com',
'username': 'pyclass',
'password': getpass(),
'device_type': 'cisco_nxos',
}
cfg_file = 'config_changes.txt'
net_connect = Netmiko(**nxos1)
print()
print(net_connect.find_prompt())
output = net_connect.send_config_from_file(cfg_file)
print(output)
print()
net_connect.save_config()
net_connect.disconnect()
开发者ID:ilique,项目名称:netmiko,代码行数:22,代码来源:config_change_file.py
示例2: getpass
from getpass import getpass
my_device = {
"host": "host.domain.com",
"username": "pyclass",
"password": getpass(),
"device_type": "cisco_ios",
}
"""
Cisco IOS behavior on file delete:
pynet-rtr1# delete flash:/small_file_bim.txt
Delete flash:/test1.txt? [confirm]y
pynet-rtr1
"""
net_connect = Netmiko(**my_device)
filename = "text1234.txt"
cmd = "delete flash:{}".format(filename)
# send_command_timing as the router prompt is not returned
output = net_connect.send_command_timing(cmd, strip_command=False, strip_prompt=False)
if "confirm" in output:
output += net_connect.send_command_timing(
"\n", strip_command=False, strip_prompt=False
)
net_connect.disconnect()
print(output)
开发者ID:ktbyers,项目名称:netmiko,代码行数:30,代码来源:handle_prompts.py
示例3: getpass
#!/usr/bin/env python
from __future__ import print_function, unicode_literals
# Netmiko is the same as ConnectHandler
from netmiko import Netmiko
from getpass import getpass
my_device = {
'host': "host.domain.com",
'username': 'pyclass',
'password': getpass(),
'device_type': 'cisco_ios',
}
net_connect = Netmiko(**my_device)
cfg_commands = ['logging buffered 10000', 'no logging console']
# send_config_set() will automatically enter/exit config mode
output = net_connect.send_config_set(cfg_commands)
print(output)
net_connect.disconnect()
开发者ID:ilique,项目名称:netmiko,代码行数:22,代码来源:config_changes.py
示例4: getpass
#!/usr/bin/env python
from netmiko import Netmiko
from getpass import getpass
cisco1 = {
"host": "cisco1.twb-tech.com",
"username": "pyclass",
"password": getpass(),
"device_type": "cisco_ios",
}
net_connect = Netmiko(**cisco1)
command = "show ip int brief"
print()
print(net_connect.find_prompt())
output = net_connect.send_command(command, use_textfsm=True)
net_connect.disconnect()
print(output)
print()
开发者ID:ktbyers,项目名称:netmiko,代码行数:20,代码来源:send_command_textfsm.py
示例5: send_command
"""
Optional, use send_command() in conjunction with ntc-templates to execute a show command. Have
TextFSM automatically convert this show command output to structured data.
"""
from __future__ import print_function, unicode_literals
from netmiko import Netmiko
from getpass import getpass
from pprint import pprint
try:
host = raw_input("Enter host to connect to: ")
except NameError:
host = input("Enter host to connect to: ")
password = getpass()
device = {
'host': host,
'username': 'pyclass',
'password': password,
'device_type': 'cisco_ios',
}
command = 'show ip int brief'
net_connect = Netmiko(**device)
output = net_connect.send_command(command, use_textfsm=True)
print()
print('-' * 80)
pprint(output)
print('-' * 80)
print()
开发者ID:McGuireChris,项目名称:pynet,代码行数:30,代码来源:exercise5.py
示例6: getpass
#!/usr/bin/env python
from netmiko import Netmiko
from getpass import getpass
password = getpass()
cisco1 = {
'host': 'cisco1.twb-tech.com',
'username': 'pyclass',
'password': password,
'device_type': 'cisco_ios',
'secret': password,
}
net_connect = Netmiko(**cisco1)
print(net_connect.find_prompt())
net_connect.send_command_timing("disable")
print(net_connect.find_prompt())
net_connect.enable()
print(net_connect.find_prompt())
# Go into config mode
net_connect.config_mode()
print(net_connect.find_prompt())
net_connect.exit_config_mode()
print(net_connect.find_prompt())
net_connect.disconnect()
开发者ID:ilique,项目名称:netmiko,代码行数:27,代码来源:enable.py
示例7: getpass
# SNMPv3
from netmiko.snmp_autodetect import SNMPDetect
from netmiko import Netmiko
from getpass import getpass
device = {
'host': 'cisco1.twb-tech.com',
'username': 'pyclass',
'password': getpass(),
}
snmp_key = getpass("Enter SNMP community: ")
my_snmp = SNMPDetect("cisco1.twb-tech.com", snmp_version="v3", user='pysnmp',
auth_key=snmp_key, encrypt_key=snmp_key, auth_proto="sha",
encrypt_proto="aes128")
device_type = my_snmp.autodetect()
print(device_type)
device['device_type'] = device_type
net_connect = Netmiko(**device)
print(net_connect.find_prompt())
开发者ID:ilique,项目名称:netmiko,代码行数:21,代码来源:autodetect_snmp_v3.py
示例8: getpass
#!/usr/bin/env python
from netmiko import SSHDetect, Netmiko
from getpass import getpass
device = {
'device_type': 'autodetect',
'host': 'cisco1.twb-tech.com',
'username': 'pyclass',
'password': getpass(),
}
guesser = SSHDetect(**device)
best_match = guesser.autodetect()
print(best_match) # Name of the best device_type to use further
print(guesser.potential_matches) # Dictionary of the whole matching result
device['device_type'] = best_match
connection = Netmiko(**device)
print(connection.find_prompt())
开发者ID:ilique,项目名称:netmiko,代码行数:20,代码来源:autodetect_ssh.py
示例9: getpass
#!/usr/bin/env python
from __future__ import print_function, unicode_literals
# Netmiko is the same as ConnectHandler
from netmiko import Netmiko
from getpass import getpass
my_device = {
'host': 'host.domain.com',
'username': 'pyclass',
'password': getpass(),
'device_type': 'cisco_ios',
}
net_connect = Netmiko(**my_device)
output = net_connect.send_command("show ip int brief")
print(output)
net_connect.disconnect()
开发者ID:ilique,项目名称:netmiko,代码行数:20,代码来源:show_command.py
示例10: getpass
#!/usr/bin/env python
from __future__ import print_function, unicode_literals
# Netmiko is the same as ConnectHandler
from netmiko import Netmiko
from getpass import getpass
my_device = {
'host': "host.domain.com",
'username': 'pyclass',
'password': getpass(),
'device_type': 'cisco_ios',
}
net_connect = Netmiko(**my_device)
# Make configuration changes using an external file
output = net_connect.send_config_from_file("change_file.txt")
print(output)
net_connect.disconnect()
开发者ID:ilique,项目名称:netmiko,代码行数:21,代码来源:config_changes_from_file.py
示例11: getpass
#!/usr/bin/env python
from netmiko import Netmiko
from getpass import getpass
device = {
'host': 'srx1.twb-tech.com',
'username': 'pyclass',
'password': getpass(),
'device_type': 'juniper_junos',
}
commands = [
'set system syslog archive size 240k files 3 '
]
net_connect = Netmiko(**device)
print()
print(net_connect.find_prompt())
output = net_connect.send_config_set(commands, exit_config_mode=False)
output += net_connect.commit(and_quit=True)
print(output)
print()
net_connect.disconnect()
开发者ID:ilique,项目名称:netmiko,代码行数:25,代码来源:config_change_jnpr.py
示例12: raw_input
try:
host = raw_input("Enter host to connect to: ")
except NameError:
host = input("Enter host to connect to: ")
password = getpass()
device = {
'host': host,
'username': 'pyclass',
'password': password,
'device_type': 'cisco_ios',
}
filename = 'smallfile'
command = 'delete flash:{}'.format(filename)
net_connect = Netmiko(**device)
output = net_connect.send_command_timing(command, strip_prompt=False, strip_command=False)
if 'confirm' in output:
# I don't confirm the file delete.
output += net_connect.send_command_timing('n', strip_prompt=False, strip_command=False)
else:
raise ValueError("Expected confirm message in output")
print()
print('-' * 80)
print(output)
print('-' * 80)
print()
开发者ID:McGuireChris,项目名称:pynet,代码行数:29,代码来源:exercise3.py
示例13: getpass
#!/usr/bin/env python
from netmiko import Netmiko
from getpass import getpass
R01 = {
"host": "192.168.1.32",
"username": "admin",
"password": getpass(),
"device_type": "cisco_ios",
}
cfg_file = "config_changes.txt"
net_connect = Netmiko(**R01)
# routing table before change #
command = "show ip route"
print('routes PRE changes')
print(net_connect.find_prompt())
pre_routes = net_connect.send_command(command)
print(pre_routes)
print()
# make changes #
print()
print(net_connect.find_prompt())
output = net_connect.send_config_from_file(cfg_file)
print(output)
print()
# routing table after changes #
print('routes POST changes')
开发者ID:befthimi,项目名称:neteng,代码行数:31,代码来源:netmiko_changes_from_file.py
示例14: raw_input
try:
host = raw_input("Enter host to connect to: ")
except NameError:
host = input("Enter host to connect to: ")
password = getpass()
device = {
'host': host,
'username': 'pyclass',
'password': password,
'device_type': 'cisco_ios',
}
net_connect = Netmiko(**device)
# Use send_config_set() to make config change
config = ['logging console', 'logging buffer 15000']
output = net_connect.send_config_set(config)
output_printer(output)
# Use send_config_from_file() to make config change
output = net_connect.send_config_from_file('config.txt')
output_printer(output)
message = "Verifying config change\n"
output = net_connect.send_command("show run | inc logging")
if '8000' in output:
message += "Logging buffer is size 8000"
开发者ID:McGuireChris,项目名称:pynet,代码行数:29,代码来源:exercise4.py
示例15: getpass
#!/usr/bin/env python
from netmiko import Netmiko
from getpass import getpass
cisco1 = {
'host': 'cisco1.twb-tech.com',
'username': 'pyclass',
'password': getpass(),
'device_type': 'cisco_ios',
}
net_connect = Netmiko(**cisco1)
command = 'copy flash:c880data-universalk9-mz.154-2.T1.bin flash:test1.bin'
print()
print(net_connect.find_prompt())
output = net_connect.send_command(command, delay_factor=4)
print(output)
print()
开发者ID:ilique,项目名称:netmiko,代码行数:19,代码来源:send_command_delay.py
示例16: getpass
#!/usr/bin/env python
from netmiko import Netmiko
from getpass import getpass
nxos1 = {
"host": "nxos1.twb-tech.com",
"username": "pyclass",
"password": getpass(),
"device_type": "cisco_nxos",
}
commands = ["logging history size 500"]
net_connect = Netmiko(**nxos1)
print()
print(net_connect.find_prompt())
output = net_connect.send_config_set(commands)
output += net_connect.send_command("copy run start")
print(output)
print()
开发者ID:ktbyers,项目名称:netmiko,代码行数:21,代码来源:config_change.py
示例17: Netmiko
#!/usr/bin/env python
from netmiko import Netmiko
from getpass import getpass
net_connect = Netmiko(
"cisco1.twb-tech.com",
username="pyclass",
password=getpass(),
device_type="cisco_ios",
)
print(net_connect.find_prompt())
net_connect.disconnect()
开发者ID:ktbyers,项目名称:netmiko,代码行数:13,代码来源:simple_conn.py
示例18: getpass
#!/usr/bin/env python
from __future__ import print_function, unicode_literals
# Netmiko is the same as ConnectHandler
from netmiko import Netmiko
from getpass import getpass
my_device = {
'host': 'host.domain.com',
'username': 'pyclass',
'password': getpass(),
'device_type': 'cisco_ios',
}
net_connect = Netmiko(**my_device)
# Requires ntc-templates to be installed in ~/ntc-templates/templates
output = net_connect.send_command("show ip int brief", use_textfsm=True)
print(output)
开发者ID:ilique,项目名称:netmiko,代码行数:18,代码来源:show_command_textfsm.py
示例19: getpass
#!/usr/bin/env python
from __future__ import print_function, unicode_literals
# Netmiko is the same as ConnectHandler
from netmiko import Netmiko
from getpass import getpass
my_device = {
'host': "host.domain.com",
'username': 'pyclass',
'password': getpass(),
'device_type': 'cisco_ios',
# Increase (essentially) all sleeps by a factor of 2
'global_delay_factor': 2,
}
net_connect = Netmiko(**my_device)
# Increase the sleeps for just send_command by a factor of 2
output = net_connect.send_command("show ip int brief", delay_factor=2)
print(output)
net_connect.disconnect()
开发者ID:ilique,项目名称:netmiko,代码行数:21,代码来源:add_delay.py
示例20: Netmiko
#!/usr/bin/env python
from netmiko import Netmiko
from getpass import getpass
key_file = "/home/gituser/.ssh/test_rsa"
cisco1 = {
"device_type": "cisco_ios",
"host": "cisco1.twb-tech.com",
"username": "testuser",
"use_keys": True,
"key_file": key_file,
}
net_connect = Netmiko(**cisco1)
print(net_connect.find_prompt())
output = net_connect.send_command("show ip arp")
print(output)
开发者ID:ktbyers,项目名称:netmiko,代码行数:18,代码来源:conn_ssh_keys.py
注:本文中的netmiko.Netmiko类示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论