Python samples.specify函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› Python›Python编程经验

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Python中samples.specify函数的典型用法代码示例。如果您正苦于以下问题：Python specify函数的具体用法？Python specify怎么用？Python specify使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了specify函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Python代码示例。

示例1: dataSingleMu

 def dataSingleMu() :
     jw = calculables.Other.jsonWeight("cert/Cert_160404-167151_7TeV_PromptReco_Collisions11_JSON.txt") #869/pb            
     out = []
     out += specify(names = "SingleMu.Run2011A-PR-v4.FJ.Burt2_2mu_skim",   weights = jw, overrideLumi = 216.43)
     out += specify(names = "SingleMu.Run2011A-PR-v4.FJ.Burt_2mu_skim",    weights = jw, overrideLumi = 294.45)
     out += specify(names = "SingleMu.Run2011A-May10-v1.FJ.Burt_2mu_skim", weights = jw, overrideLumi = 186.55)
     return out

开发者ID:aharel，项目名称:supy，代码行数:7，代码来源:muonLook.py

示例2: listOfSamples

    def listOfSamples(self,params) :
        from samples import specify

        def dataSingleMu() :
            jw = calculables.Other.jsonWeight("cert/Cert_160404-167151_7TeV_PromptReco_Collisions11_JSON.txt") #869/pb            
            out = []
            out += specify(names = "SingleMu.Run2011A-PR-v4.FJ.Burt2_2mu_skim",   weights = jw, overrideLumi = 216.43)
            out += specify(names = "SingleMu.Run2011A-PR-v4.FJ.Burt_2mu_skim",    weights = jw, overrideLumi = 294.45)
            out += specify(names = "SingleMu.Run2011A-May10-v1.FJ.Burt_2mu_skim", weights = jw, overrideLumi = 186.55)
            return out

        def dataDoubleMu() :
            out = []
            out += specify(names = "DoubleMu.Run2011A-05Aug2011-v1.AOD.job663",  )
            out += specify(names = "DoubleMu.Run2011A-May10ReReco-v1.AOD.job662",)
            #out += specify(names = "DoubleMu.Run2011A-PromptReco-v4.AOD.job664", )
            out += specify(names = "DoubleMu.Run2011A-PromptReco-v6.AOD.job665", )
            out += specify(names = "DoubleMu.Run2011B-PromptReco-v1.AOD.job666", )
            
            return out

        def data() :
            return dataDoubleMu()
        
        eL = 3000 # 1/pb
        #return data()
        return (data() +\
                specify(names = "tt_tauola_mg_2mu_skim", effectiveLumi = eL) +\
                specify(names = "dyll_jets_mg_2mu_skim", effectiveLumi = eL) +\
                specify(names = "w_jets_mg_2mu_skim",    effectiveLumi = eL)
                )

开发者ID:aharel，项目名称:supy，代码行数:31，代码来源:muonLook.py

示例3: listOfSamples

 def listOfSamples(self) :
     from samples import specify
     return [  specify(name = "g_jets_mg_pt40_100",    nFilesMax =  8, color = r.kGreen   ),
               specify(name = "g_jets_mg_pt100_200",   nFilesMax = -1, color = r.kGreen   ),
               specify(name = "g_jets_mg_pt200",       nFilesMax = -1, color = r.kGreen   ),
               specify(name = "z_inv_mg_skim",         nFilesMax = -1, color = r.kMagenta ),
               ]

开发者ID:aharel，项目名称:supy，代码行数:7，代码来源:alphatEtaDependence.py

示例4: listOfSamples

 def listOfSamples(self, params) :
     from samples import specify
     out = []
     out += specify(names = "znunu_jets_mg_ht_50_100")
     out += specify(names = "znunu_jets_mg_ht_100_200")
     out += specify(names = "znunu_jets_mg_ht_200_inf")
     return out

开发者ID:aharel，项目名称:supy，代码行数:7，代码来源:hadronicSkim.py

示例5: data

 def data() :
     jw = calculables.Other.jsonWeight("cert/Cert_160404-163869_7TeV_PromptReco_Collisions11_JSON.txt", acceptFutureRuns = False) #193/pb
     out = []
     out += specify(names = "SingleMu.Run2011A-PR-v2.Alex_1muskim"  , weights = jw, overrideLumi = 12.27)
     out += specify(names = "SingleMu.Run2011A-PR-v2.Robin1_1muskim", weights = jw, overrideLumi = 87.31)
     out += specify(names = "SingleMu.Run2011A-PR-v2.Robin2_1muskim", weights = jw, overrideLumi = 79.34)
     return out

开发者ID:elaird，项目名称:susycaf，代码行数:7，代码来源:muonLook1.py

示例6: dataDoubleMu

 def dataDoubleMu() :
     out = []
     out += specify(names = "DoubleMu.Run2011A-05Aug2011-v1.AOD.job663",  )
     out += specify(names = "DoubleMu.Run2011A-May10ReReco-v1.AOD.job662",)
     #out += specify(names = "DoubleMu.Run2011A-PromptReco-v4.AOD.job664", )
     out += specify(names = "DoubleMu.Run2011A-PromptReco-v6.AOD.job665", )
     out += specify(names = "DoubleMu.Run2011B-PromptReco-v1.AOD.job666", )
     
     return out

开发者ID:aharel，项目名称:supy，代码行数:9，代码来源:muonLook.py

示例7: listOfSamples

 def listOfSamples(self,pars) :
     import ROOT as r
     from samples import specify
     return (specify(names = "tt_tauola_fj_mg", color = r.kRed,
                     #nFilesMax=1, nEventsMax=4100) +
                     effectiveLumi = pars["effectiveLumi"]) +
             specify(names = "tt_tauola_fj_mg", color = r.kBlue, weights = "wQQbar") +
             #specify(names = "tt_tauola_fj", color = r.kBlue,
             #        #nFilesMax=1, nEventsMax=4100)+
             #        effectiveLumi = pars["effectiveLumi"]) +
             #specify( names = "w_jets_mg", effectiveLumi = 100, color = 28 ) +
             [])

开发者ID:aharel，项目名称:supy，代码行数:12，代码来源:topAsymmKinfit.py

示例8: ttbar_py

 def ttbar_py(eL = None) :
     return (specify(names = "tt_tauola_fj", effectiveLumi = eL, color = r.kBlue, weights = ["wNonQQbar",'tw','nvr']) +
             sum( [specify(names = "tt_tauola_fj", effectiveLumi = eL, color = color, weights = [ calculables.Top.wTopAsym(asym), 'tw','nvr' ] )
                   for asym,color in [(0.0,r.kOrange),
                                      (-0.3,r.kGreen),(0.3,r.kRed),
                                      #(-0.6,r.kYellow),(0.6,r.kYellow),
                                      #(-0.5,r.kYellow),(0.5,r.kYellow),
                                      #(-0.4,r.kYellow),(0.4,r.kYellow),
                                      #(-0.2,r.kYellow),(0.2,r.kYellow),
                                      #(-0.1,r.kYellow),(0.1,r.kYellow),
                                      ]], [])
             )[: 0 if "QCD" in pars['tag'] else 2 if 'Wlv' in pars['tag'] else None]

开发者ID:aharel，项目名称:supy，代码行数:12，代码来源:topAsymm.py

示例9: ewk

 def ewk(eL, era = "") :
     zName = ""
     wName = ""
     if era=="spring11" :
         zName = "zinv_jets_mg"
         wName = "w_jets_mg"
     if era=="summer11" :
         zName = "znunu_jets_mg_ht_200_inf_summer11_skim"
         wName = "w_jets_mg_tauola_ht_300_inf_summer11"
     
     return ( specify(names = zName,  effectiveLumi = eL, color = r.kRed + 1) +
              #specify(names = "z_jets_mg_v12_skim", effectiveLumi = eL, color = r.kYellow-3) +
              specify(names = wName, effectiveLumi = eL, color = 28         ) )

开发者ID:aharel，项目名称:supy，代码行数:13，代码来源:hadronicLook.py

示例10: listOfSamples

    def listOfSamples(self,params) :
        from samples import specify
        out = []

        #out += specify(names = "Photon.Run2011A-PromptReco-v4.AOD.Rob3_skim")
        #out += specify(names = "Photon.Run2011A-PromptReco-v4.AOD.Rob4_skim")
        #out += specify(names = "Photon.Run2011A-PromptReco-v4.AOD.Darren1_skim")
        
        #out += specify(names = "HT.Run2011A-PromptReco-v4.AOD.Darren1")
        #out += specify(names = "HT.Run2011A-PromptReco-v4.AOD.Darren2")
        #out += specify(names = "HT.Run2011A-PromptReco-v4.AOD.Darren3")
        out += specify(names = "HT.Run2011A-PromptReco-v4.AOD.Darren4")
        out += specify(names = "HT.Run2011A-PromptReco-v4.AOD.Darren5")
        out += specify(names = "HT.Run2011A-PromptReco-v4.AOD.Darren6")
        return out

开发者ID:tatiana-m，项目名称:supy，代码行数:15，代码来源:triggerLook.py

示例11: listOfSamples

    def listOfSamples(self,params) :
        from samples import specify
        data = [                                                
            specify(name = "Run2010B_J_skim",           nFilesMax = -1, color = r.kBlack   , markerStyle = 20),
            specify(name = "Run2010A_JM_skim",          nFilesMax = -1, color = r.kBlack   , markerStyle = 20),
            #specify(name = "Run2010A_JMT_skim",         nFilesMax = -1, color = r.kBlack   , markerStyle = 20),
            ]                                                       
        outList = data

        for i in range(len(outList)):
            o = outList[i]
            #if "2010" in o.name: continue
            outList[i] = specify(name = o.name, color = o.color, markerStyle = o.markerStyle, nFilesMax = -1, nEventsMax = 50000)
        
        return outList

开发者ID:elaird，项目名称:susycaf，代码行数:15，代码来源:tpLook.py

示例12: listOfSamples

 def listOfSamples(self,params) :
     return ( samples.specify( names = ['SingleMu.2011B-PR1.1b',
                                        'SingleMu.2011B-PR1.1a',
                                        'SingleMu.2011A-Oct.1',
                                        'SingleMu.2011A-Aug.1',
                                        'SingleMu.2011A-PR4.1',
                                        'SingleMu.2011A-May.1'], weights = 'tw') +
              samples.specify( names = ['qcd_py6fjmu_pt_15_20',
                                        'qcd_py6fjmu_pt_20_30',
                                        'qcd_py6fjmu_pt_30_50',
                                        'qcd_py6fjmu_pt_50_80',
                                        'qcd_py6fjmu_pt_80_120',
                                        'qcd_py6fjmu_pt_120_150',
                                        'qcd_py6fjmu_pt_150',
                                        'w_jets_fj_mg',
                                        'tt_tauola_fj_mg'
                                        ], weights = ['tw','nvr'] , effectiveLumi = 300))

开发者ID:aharel，项目名称:supy，代码行数:17，代码来源:triggerWeight.py

示例13: listOfSamples

    def listOfSamples(self,params) :
        from samples import specify
        out = []

        #out += specify(names = "Photon.Run2011A-05Aug2011-v1.AOD.job663")
        #out += specify(names = "Photon.Run2011A-May10ReReco-v1.AOD.job662")
        #out += specify(names = "Photon.Run2011A-PromptReco-v4.AOD.job664")
        #out += specify(names = "Photon.Run2011A-PromptReco-v6.AOD.job667")
        #out += specify(names = "Photon.Run2011B-PromptReco-v1.AOD.job668")

        out += specify(names = "DoubleMu.Run2011A-05Aug2011-v1.AOD.job663",  )
        out += specify(names = "DoubleMu.Run2011A-May10ReReco-v1.AOD.job662",)
        out += specify(names = "DoubleMu.Run2011A-PromptReco-v4.AOD.job664", )
        out += specify(names = "DoubleMu.Run2011A-PromptReco-v6.AOD.job665", )
        out += specify(names = "DoubleMu.Run2011B-PromptReco-v1.AOD.job666", )

        return out

开发者ID:aharel，项目名称:supy，代码行数:17，代码来源:triggerLook.py

示例14: listOfSamples

    def listOfSamples(self,params) :
        from samples import specify

        def data() :
            jw = calculables.Other.jsonWeight("cert/Cert_160404-163869_7TeV_PromptReco_Collisions11_JSON.txt", acceptFutureRuns = False) #193/pb
            out = []
            out += specify(names = "SingleMu.Run2011A-PR-v2.Alex_1muskim"  , weights = jw, overrideLumi = 12.27)
            out += specify(names = "SingleMu.Run2011A-PR-v2.Robin1_1muskim", weights = jw, overrideLumi = 87.31)
            out += specify(names = "SingleMu.Run2011A-PR-v2.Robin2_1muskim", weights = jw, overrideLumi = 79.34)
            return out

        eL = 3000 # 1/pb
        #return data()
        return (data() +\
                specify(names = "tt_tauola_mg_1muskim", effectiveLumi = eL) +\
                specify(names = "dyll_jets_mg_1muskim", effectiveLumi = eL) +\
                specify(names = "w_jets_mg_1muskim",    effectiveLumi = eL)
                )

开发者ID:elaird，项目名称:susycaf，代码行数:18，代码来源:muonLook1.py

示例15: listOfSamples

    def listOfSamples(self,pars) :
        from samples import specify
        eL = pars["effectiveLumi"]

        if type(pars["generator"]) is list :
            suffixColor = zip(pars["generator"],[r.kBlack,r.kRed])
            return sum([specify(names = "tt_tauola_fj_%s"%suf, effectiveLumi = eL, color = col) for suf,col in suffixColor],[])

        sample = "tt_tauola_fj_%s"%pars["generator"]
        asymms = [(r.kBlue, -0.3),
                  (r.kGreen, 0.0),
                  (r.kRed,   0.3)]
        intrinsicR = -0.05 if pars['generator'] == "mg" else 0.0
        return (
            #specify( names = sample, effectiveLumi = 500, color = r.kBlack,     weights = calculables.Gen.wNonQQbar()) +
            #specify( names = sample, effectiveLumi = eL, color = r.kRed,       weights = calculables.Gen.wQQbar()) +
            sum([specify(names = sample, effectiveLumi = eL, color = col, weights = calculables.Top.wTopAsym(A,intrinsicR=intrinsicR)) for col,A in asymms],[]) +
            [])

开发者ID:tatiana-m，项目名称:supy，代码行数:18，代码来源:topAsymmTemplates.py

示例16: listOfSamples

 def listOfSamples(self,params) :
     from samples import specify
     return [
         specify(name = "Run2010B_MJ_skim4", color = r.kBlack   , markerStyle = 20),
         specify(name = "Run2010B_MJ_skim3", color = r.kBlack   , markerStyle = 20),
         specify(name = "Run2010B_MJ_skim2", color = r.kBlack   , markerStyle = 20),
         specify(name = "Run2010B_MJ_skim",  color = r.kBlack   , markerStyle = 20),
         specify(name = "Run2010B_J_skim2",  color = r.kBlack   , markerStyle = 20),
         specify(name = "Run2010B_J_skim",   color = r.kBlack   , markerStyle = 20),
         specify(name = "Run2010A_JM_skim",  color = r.kBlack   , markerStyle = 20),
         specify(name = "Run2010A_JMT_skim", color = r.kBlack   , markerStyle = 20)
         ]

开发者ID:aharel，项目名称:supy，代码行数:12，代码来源:prescales.py

示例17: listOfSamples

 def listOfSamples(self,params) :
     from samples import specify
     outList =[
         #specify(name = "qcd_py6_pt15",          nFilesMax = 3, nEventsMax = -1, color = r.kBlue    ),
         specify(name = "qcd_py6_pt30",          nFilesMax = 3, nEventsMax = -1, color = r.kBlue    ),
         #specify(name = "qcd_py6_pt80",          nFilesMax = 3, nEventsMax = -1, color = r.kBlue    ),
         #specify(name = "qcd_py6_pt170",         nFilesMax = 1, nEventsMax = 1000, color = r.kBlue    ),
         #specify(name = "qcd_py6_pt300",         nFilesMax = 1, nEventsMax = 1000, color = r.kBlue    ),
         ]
     return outList

开发者ID:elaird，项目名称:susycaf，代码行数:10，代码来源:etaLook.py

示例18: listOfSamples

    def listOfSamples(self,pars) :
        import ROOT as r
        eL = pars["effectiveLumi"]

        if type(pars["generator"]) is list :
            suffixColor = zip(pars["generator"],[r.kBlack,r.kRed])
            return sum([samples.specify(names = "tt_tauola_fj%s"%suf, effectiveLumi = eL, color = col ) for suf,col in suffixColor],[])
            #return sum([samples.specify(names = "tt_tauola_fj%s"%suf, effectiveLumi = eL, color = col, weights = "wQQbar" ) for suf,col in suffixColor],[])
            #return sum([samples.specify(names = "tt_tauola_fj%s"%suf, effectiveLumi = eL, color = col, weights = ["wQQbar","TwoToTwo"] ) for suf,col in suffixColor],[])

        sample = "tt_tauola_fj%s"%pars["generator"]
        asymms = [(r.kBlue, -0.3),
                  (r.kGreen, 0.0),
                  (r.kRed,   0.3)]
        R_sm = -0.05 if pars['generator'] == "mg" else 0.0
        return (
            #samples.specify( names = sample, effectiveLumi = 500, color = r.kBlack,     weights = calculables.Gen.wNonQQbar()) +
            #samples.specify( names = sample, effectiveLumi = eL, color = r.kRed,       weights = calculables.Gen.wQQbar()) +
            sum([samples.specify(names = sample, effectiveLumi = eL, color = col, weights = calculables.Top.wTopAsym(R,R_sm=R_sm)) for col,R in asymms],[]) +
            [])

开发者ID:aharel，项目名称:supy，代码行数:20，代码来源:topAsymmTemplates.py

示例19: listOfSamples

 def listOfSamples(self) :
     from samples import specify
     return [  #specify(name = "JetMET_skim",           nFilesMax = 1, color = r.kBlack   , markerStyle = 20),
             ##specify(name = "qcd_mg_ht_250_500_old", nFilesMax = 1, color = r.kBlue    ),
             ##specify(name = "qcd_py_pt30",           nFilesMax = 1, color = r.kBlue    ),
               #specify(name = "qcd_py_pt80",           nFilesMax = 1, color = r.kBlue    ),
               #specify(name = "qcd_py_pt170",          nFilesMax = 1, color = r.kBlue    ),
               #specify(name = "qcd_py_pt300",          nFilesMax = 1, color = r.kBlue    ),
             ##specify(name = "qcd_py_pt470",          nFilesMax = 1, color = r.kBlue    ),
             ##specify(name = "qcd_py_pt800",          nFilesMax = 1, color = r.kBlue    ),
             ##specify(name = "qcd_py_pt1400",         nFilesMax = 1, color = r.kBlue    ),
               #specify(name = "tt_tauola_mg",          nFilesMax = 1, color = r.kOrange  ),
               specify(name = "g_jets_mg_pt40_100",    nFilesMax = 1, color = r.kGreen   ),
               specify(name = "g_jets_mg_pt100_200",   nFilesMax = -1, color = r.kGreen   ),
               specify(name = "g_jets_mg_pt200",       nFilesMax = -1, color = r.kGreen   ),
               specify(name = "z_inv_mg_skim",         nFilesMax = -1,  color = r.kMagenta ),
               #specify(name = "z_jets_mg_skim",        nFilesMax = 1, color = r.kYellow-3),
               #specify(name = "w_jets_mg_skim",        nFilesMax = 1, color = 28         ),
               #specify(name = "lm0",                   nFilesMax = 1, color = r.kRed     ),
               #specify(name = "lm1",                   nFilesMax = 1, color = r.kRed+1   ),
               ]

开发者ID:aharel，项目名称:supy，代码行数:21，代码来源:photonSelection.py

示例20: dataEps

        def dataEps() :
            out = []

            jw = calculables.Other.jsonWeight("cert/Cert_160404-167913_7TeV_PromptReco_Collisions11_JSON.txt") #1078/pb            

            out += specify(names = "HT.Run2011A-May10ReReco-v1.AOD.Bryn",   weights = jw, overrideLumi = 183.0)
            out += specify(names = "HT.Run2011A-PromptReco-v4.AOD.Bryn1",   weights = jw, overrideLumi =  70.2)
            out += specify(names = "HT.Run2011A-PromptReco-v4.AOD.Bryn2",   weights = jw, overrideLumi = 101.3)
            out += specify(names = "HT.Run2011A-PromptReco-v4.AOD.Bryn3",   weights = jw, overrideLumi =  74.8)
            out += specify(names = "HT.Run2011A-PromptReco-v4.AOD.Darren1", weights = jw, overrideLumi = 181.2)
            out += specify(names = "HT.Run2011A-PromptReco-v4.AOD.Darren2", weights = jw, overrideLumi = 122.8)
            out += specify(names = "HT.Run2011A-PromptReco-v4.AOD.Darren3", weights = jw, overrideLumi =  36.4)
            out += specify(names = "HT.Run2011A-PromptReco-v4.AOD.Darren4", weights = jw, overrideLumi =  50.5)
            out += specify(names = "HT.Run2011A-PromptReco-v4.AOD.Darren5", weights = jw, overrideLumi = 130.6)
            out += specify(names = "HT.Run2011A-PromptReco-v4.AOD.Darren6", weights = jw, overrideLumi = 116.0)

            #out += specify(names = "HT_skim")
            #out += specify(names = "MT2_events")
            #out += specify(names = "qcd_py6_375")
            #out += specify(names = "calo_375")
            return out

开发者ID:aharel，项目名称:supy，代码行数:21，代码来源:hadronicLook.py

注：本文中的samples.specify函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

Python samples.SampleBase类代码示例发布时间：2022-05-27

Python samples.loadPacmanData函数代码示例发布时间：2022-05-27

Python util.grid_equal函数代码示例

1 Python 入门教程

Python入门教程 Python 是一种解释型、面向对象、动态数据类型的高级程序设计语言。 P

阅读：13813|2022-01-22

2 Python wikiutil.getFrontPage函数代码示例

Python wikiutil.getFrontPage函数代码示例

阅读：10207|2022-05-24

3 Python 简介

Python 简介 Python 是一个高层次的结合了解释性、编译性、互动性和面向对象的脚本

阅读：4093|2022-01-22

4 Python tests.group函数代码示例

Python tests.group函数代码示例

阅读：4045|2022-05-27

5 Python util.check_if_user_has_permission

Python util.check_if_user_has_permission函数代码示例

阅读：3845|2022-05-27

6 Python 操练实例98

Python 练习实例98 Python 100例题目：从键盘输入一个字符串，将小写字母全部转换成大

阅读：3515|2022-01-22

7 Python 环境搭建

Python 环境搭建本章节我们将向大家介绍如何在本地搭建 Python 开发环境。 Py

阅读：3032|2022-01-22

8 Python output.darkgreen函数代码示例

Python output.darkgreen函数代码示例

阅读：2656|2022-05-25

9 Python 基础语法

Python 基础语法 Python 语言与 Perl，C 和 Java 等语言有许多相似之处。但是，也

阅读：2652|2022-01-22

10 Python 中文编码

Python 中文编码前面章节中我们已经学会了如何用 Python 输出 Hello, World!，英文没

阅读：2303|2022-01-22

客服电话

电子邮件

Python samples.specify函数代码示例

示例1: dataSingleMu

示例2: listOfSamples

示例3: listOfSamples

示例4: listOfSamples

示例5: data

示例6: dataDoubleMu

示例7: listOfSamples

示例8: ttbar_py

示例9: ewk

示例10: listOfSamples

示例11: listOfSamples

示例12: listOfSamples

示例13: listOfSamples

示例14: listOfSamples

示例15: listOfSamples

示例16: listOfSamples

示例17: listOfSamples

示例18: listOfSamples

示例19: listOfSamples

示例20: dataEps

请发表评论

全部评论

上一篇：

下一篇：

Python util.grid_equal函数代码示例

Python util.get_worker_name函数代码示例

Python util.get_webmention_target函数代

Python util.get_uuid函数代码示例

Python util.get_type_by_name函数代码示例

Python util.grid_equal函数代码示例

Python util.get_worker_name函数代码示例

Python util.get_webmention_target函数代

Python util.get_uuid函数代码示例

Python util.get_type_by_name函数代码示例

Python util.get_stdout函数代码示例

关于我们

产品与服务

解决方案

139-2527-9053