def _wait_child(self):
        try:
            # Don't block if no child processes have exited
            pid, status = os.waitpid(0, os.WNOHANG)
            if not pid:
                return None
        except OSError as exc:
            if exc.errno not in (errno.EINTR, errno.ECHILD):
                raise
            return None

        if os.WIFSIGNALED(status):
            sig = os.WTERMSIG(status)
            LOG.info(_('Child %(pid)d killed by signal %(sig)d'),
                     dict(pid=pid, sig=sig))
        else:
            code = os.WEXITSTATUS(status)
            LOG.info(_('Child %(pid)s exited with status %(code)d'),
                     dict(pid=pid, code=code))

        if pid not in self.children:
            LOG.warning(_('pid %d not in child list'), pid)
            return None

        wrap = self.children.pop(pid)
        wrap.children.remove(pid)
        return wrap

def _multi_send(method, context, topic, msg, timeout=None,
                envelope=False, _msg_id=None):
    """Wraps the sending of messages.

    Dispatches to the matchmaker and sends message to all relevant hosts.
    """
    conf = CONF
    LOG.debug(_("%(msg)s") % {'msg': ' '.join(map(pformat, (topic, msg)))})

    queues = _get_matchmaker().queues(topic)
    LOG.debug(_("Sending message(s) to: %s"), queues)

    # Don't stack if we have no matchmaker results
    if not queues:
        LOG.warn(_("No matchmaker results. Not casting."))
        # While not strictly a timeout, callers know how to handle
        # this exception and a timeout isn't too big a lie.
        raise rpc_common.Timeout(_("No match from matchmaker."))

    # This supports brokerless fanout (addresses > 1)
    for queue in queues:
        (_topic, ip_addr) = queue
        _addr = "tcp://%s:%s" % (ip_addr, conf.rpc_zmq_port)

        if method.__name__ == '_cast':
            eventlet.spawn_n(method, _addr, context,
                             _topic, msg, timeout, envelope,
                             _msg_id)
            return
        return method(_addr, context, _topic, msg, timeout,
                      envelope)

    def wait(self):
        """Loop waiting on children to die and respawning as necessary."""

        LOG.debug(_('Full set of CONF:'))
        CONF.log_opt_values(LOG, std_logging.DEBUG)

        while True:
            self.handle_signal()
            self._respawn_children()
            if self.sigcaught:
                signame = _signo_to_signame(self.sigcaught)
                LOG.info(_('Caught %s, stopping children'), signame)
            if not _is_sighup(self.sigcaught):
                break

            for pid in self.children:
                os.kill(pid, signal.SIGHUP)
            self.running = True
            self.sigcaught = None

        for pid in self.children:
            try:
                os.kill(pid, signal.SIGTERM)
            except OSError as exc:
                if exc.errno != errno.ESRCH:
                    raise

        # Wait for children to die
        if self.children:
            LOG.info(_('Waiting on %d children to exit'), len(self.children))
            while self.children:
                self._wait_child()

        def _inner():
            if initial_delay:
                greenthread.sleep(initial_delay)

            try:
                while self._running:
                    start = timeutils.utcnow()
                    self.f(*self.args, **self.kw)
                    end = timeutils.utcnow()
                    if not self._running:
                        break
                    delay = interval - timeutils.delta_seconds(start, end)
                    if delay <= 0:
                        LOG.warn(_('task run outlasted interval by %s sec') %
                                 -delay)
                    greenthread.sleep(delay if delay > 0 else 0)
            except LoopingCallDone as e:
                self.stop()
                done.send(e.retvalue)
            except Exception:
                LOG.exception(_('in fixed duration looping call'))
                done.send_exception(*sys.exc_info())
                return
            else:
                done.send(True)

    def _wait_for_exit_or_signal(self, ready_callback=None):
        status = None
        signo = 0

        LOG.debug(_('Full set of CONF:'))
        CONF.log_opt_values(LOG, std_logging.DEBUG)

        try:
            if ready_callback:
                ready_callback()
            super(ServiceLauncher, self).wait()
        except SignalExit as exc:
            signame = _signo_to_signame(exc.signo)
            LOG.info(_('Caught %s, exiting'), signame)
            status = exc.code
            signo = exc.signo
        except SystemExit as exc:
            status = exc.code
        finally:
            self.stop()
            if rpc:
                try:
                    rpc.cleanup()
                except Exception:
                    # We're shutting down, so it doesn't matter at this point.
                    LOG.exception(_('Exception during rpc cleanup.'))

        return status, signo

    def run_periodic_tasks(self, context, raise_on_error=False):
        """Tasks to be run at a periodic interval."""
        idle_for = DEFAULT_INTERVAL
        for task_name, task in self._periodic_tasks:
            full_task_name = ".".join([self.__class__.__name__, task_name])

            now = timeutils.utcnow()
            spacing = self._periodic_spacing[task_name]
            last_run = self._periodic_last_run[task_name]

            # If a periodic task is _nearly_ due, then we'll run it early
            if spacing is not None and last_run is not None:
                due = last_run + datetime.timedelta(seconds=spacing)
                if not timeutils.is_soon(due, 0.2):
                    idle_for = min(idle_for, timeutils.delta_seconds(now, due))
                    continue

            if spacing is not None:
                idle_for = min(idle_for, spacing)

            LOG.debug(_("Running periodic task %(full_task_name)s"), {"full_task_name": full_task_name})
            self._periodic_last_run[task_name] = timeutils.utcnow()

            try:
                task(self, context)
            except Exception as e:
                if raise_on_error:
                    raise
                LOG.exception(_("Error during %(full_task_name)s: %(e)s"), {"full_task_name": full_task_name, "e": e})
            time.sleep(0)

        return idle_for

            def publisher(waiter):
                LOG.info(_("Creating proxy for topic: %s"), topic)

                try:
                    # The topic is received over the network,
                    # don't trust this input.
                    if self.badchars.search(topic) is not None:
                        emsg = _("Topic contained dangerous characters.")
                        LOG.warn(emsg)
                        raise RPCException(emsg)

                    out_sock = ZmqSocket("ipc://%s/zmq_topic_%s" %
                                         (ipc_dir, topic),
                                         sock_type, bind=True)
                except RPCException:
                    waiter.send_exception(*sys.exc_info())
                    return

                self.topic_proxy[topic] = eventlet.queue.LightQueue(
                    CONF.rpc_zmq_topic_backlog)
                self.sockets.append(out_sock)

                # It takes some time for a pub socket to open,
                # before we can have any faith in doing a send() to it.
                if sock_type == zmq.PUB:
                    eventlet.sleep(.5)

                waiter.send(True)

                while(True):
                    data = self.topic_proxy[topic].get()
                    out_sock.send(data, copy=False)

    def consume_in_thread(self):
        """Runs the ZmqProxy service."""
        ipc_dir = CONF.rpc_zmq_ipc_dir
        consume_in = "tcp://%s:%s" % \
            (CONF.rpc_zmq_bind_address,
             CONF.rpc_zmq_port)
        consumption_proxy = InternalContext(None)

        try:
            os.makedirs(ipc_dir)
        except os.error:
            if not os.path.isdir(ipc_dir):
                with excutils.save_and_reraise_exception():
                    LOG.error(_("Required IPC directory does not exist at"
                                " %s") % (ipc_dir, ))
        try:
            self.register(consumption_proxy,
                          consume_in,
                          zmq.PULL)
        except zmq.ZMQError:
            if os.access(ipc_dir, os.X_OK):
                with excutils.save_and_reraise_exception():
                    LOG.error(_("Permission denied to IPC directory at"
                                " %s") % (ipc_dir, ))
            with excutils.save_and_reraise_exception():
                LOG.error(_("Could not create ZeroMQ receiver daemon. "
                            "Socket may already be in use."))

        super(ZmqProxy, self).consume_in_thread()

    def acquire(self):
        basedir = os.path.dirname(self.fname)

        if not os.path.exists(basedir):
            fileutils.ensure_tree(basedir)
            LOG.info(_('Created lock path: %s'), basedir)

        self.lockfile = open(self.fname, 'w')

        while True:
            try:
                # Using non-blocking locks since green threads are not
                # patched to deal with blocking locking calls.
                # Also upon reading the MSDN docs for locking(), it seems
                # to have a laughable 10 attempts "blocking" mechanism.
                self.trylock()
                LOG.debug(_('Got file lock "%s"'), self.fname)
                return True
            except IOError as e:
                if e.errno in (errno.EACCES, errno.EAGAIN):
                    # external locks synchronise things like iptables
                    # updates - give it some time to prevent busy spinning
                    time.sleep(0.01)
                else:
                    raise threading.ThreadError(_("Unable to acquire lock on"
                                                  " `%(filename)s` due to"
                                                  " %(exception)s") %
                                                {
                                                    'filename': self.fname,
                                                    'exception': e,
                                                })

    def __init__(self, addr, zmq_type, bind=True, subscribe=None):
        self.sock = _get_ctxt().socket(zmq_type)
        self.addr = addr
        self.type = zmq_type
        self.subscriptions = []

        # Support failures on sending/receiving on wrong socket type.
        self.can_recv = zmq_type in (zmq.PULL, zmq.SUB)
        self.can_send = zmq_type in (zmq.PUSH, zmq.PUB)
        self.can_sub = zmq_type in (zmq.SUB, )

        # Support list, str, & None for subscribe arg (cast to list)
        do_sub = {
            list: subscribe,
            str: [subscribe],
            type(None): []
        }[type(subscribe)]

        for f in do_sub:
            self.subscribe(f)

        str_data = {'addr': addr, 'type': self.socket_s(),
                    'subscribe': subscribe, 'bind': bind}

        LOG.debug(_("Connecting to %(addr)s with %(type)s"), str_data)
        LOG.debug(_("-> Subscribed to %(subscribe)s"), str_data)
        LOG.debug(_("-> bind: %(bind)s"), str_data)

        try:
            if bind:
                self.sock.bind(addr)
            else:
                self.sock.connect(addr)
        except Exception:
            raise RPCException(_("Could not open socket."))

def main():
    cfg.CONF(sys.argv[1:], project='solum')
    logging.setup('solum')
    solum.TLS.trace = trace_data.TraceData()

    LOG.info(_('Starting server in PID %s') % os.getpid())
    LOG.debug(_("Configuration:"))
    cfg.CONF.log_opt_values(LOG, std_logging.DEBUG)

    cfg.CONF.import_opt('topic', 'solum.worker.config', group='worker')
    cfg.CONF.import_opt('host', 'solum.worker.config', group='worker')
    cfg.CONF.import_opt('handler', 'solum.worker.config', group='worker')

    handlers = {
        'noop': noop_handler.Handler,
        'shell': shell_handler.Handler,
    }

    endpoints = [
        handlers[cfg.CONF.worker.handler](),
    ]

    server = service.Service(cfg.CONF.worker.topic,
                             cfg.CONF.worker.host, endpoints)
    server.serve()

    def _start_child(self, wrap):
        if len(wrap.forktimes) > wrap.workers:
            # Limit ourselves to one process a second (over the period of
            # number of workers * 1 second). This will allow workers to
            # start up quickly but ensure we don't fork off children that
            # die instantly too quickly.
            if time.time() - wrap.forktimes[0] < wrap.workers:
                LOG.info(_('Forking too fast, sleeping'))
                time.sleep(1)

            wrap.forktimes.pop(0)

        wrap.forktimes.append(time.time())

        pid = os.fork()
        if pid == 0:
            launcher = self._child_process(wrap.service)
            while True:
                self._child_process_handle_signal()
                status, signo = self._child_wait_for_exit_or_signal(launcher)
                if not _is_sighup(signo):
                    break
                launcher.restart()

            os._exit(status)

        LOG.info(_('Started child %d'), pid)

        wrap.children.add(pid)
        self.children[pid] = wrap

        return pid

    def create_consumer(self, topic, proxy, fanout=False):
        # Register with matchmaker.
        _get_matchmaker().register(topic, CONF.rpc_zmq_host)

        # Subscription scenarios
        if fanout:
            sock_type = zmq.SUB
            subscribe = ('', fanout)[type(fanout) == str]
            topic = 'fanout~' + topic.split('.', 1)[0]
        else:
            sock_type = zmq.PULL
            subscribe = None
            topic = '.'.join((topic.split('.', 1)[0], CONF.rpc_zmq_host))

        if topic in self.topics:
            LOG.info(_("Skipping topic registration. Already registered."))
            return

        # Receive messages from (local) proxy
        inaddr = "ipc://%s/zmq_topic_%s" % \
            (CONF.rpc_zmq_ipc_dir, topic)

        LOG.debug(_("Consumer is a zmq.%s"),
                  ['PULL', 'SUB'][sock_type == zmq.SUB])

        self.reactor.register(proxy, inaddr, sock_type,
                              subscribe=subscribe, in_bind=False)
        self.topics.append(topic)

 def _connect(self, params):
     """Connect to rabbit.  Re-establish any queues that may have
     been declared before if we are reconnecting.  Exceptions should
     be handled by the caller.
     """
     if self.connection:
         LOG.info(_("Reconnecting to AMQP server on "
                  "%(hostname)s:%(port)d") % params)
         try:
             self.connection.release()
         except self.connection_errors:
             pass
         # Setting this in case the next statement fails, though
         # it shouldn't be doing any network operations, yet.
         self.connection = None
     self.connection = kombu.connection.BrokerConnection(**params)
     self.connection_errors = self.connection.connection_errors
     if self.memory_transport:
         # Kludge to speed up tests.
         self.connection.transport.polling_interval = 0.0
     self.consumer_num = itertools.count(1)
     self.connection.connect()
     self.channel = self.connection.channel()
     # work around 'memory' transport bug in 1.1.3
     if self.memory_transport:
         self.channel._new_queue('ae.undeliver')
     for consumer in self.consumers:
         consumer.reconnect(self.channel)
     LOG.info(_('Connected to AMQP server on %(hostname)s:%(port)d') %
              params)

    def _process_data(self, ctxt, version, method, namespace, args):
        """Process a message in a new thread.

        If the proxy object we have has a dispatch method
        (see rpc.dispatcher.RpcDispatcher), pass it the version,
        method, and args and let it dispatch as appropriate.  If not, use
        the old behavior of magically calling the specified method on the
        proxy we have here.
        """
        ctxt.update_store()
        try:
            rval = self.proxy.dispatch(ctxt, version, method, namespace,
                                       **args)
            # Check if the result was a generator
            if inspect.isgenerator(rval):
                for x in rval:
                    ctxt.reply(x, None, connection_pool=self.connection_pool)
            else:
                ctxt.reply(rval, None, connection_pool=self.connection_pool)
            # This final None tells multicall that it is done.
            ctxt.reply(ending=True, connection_pool=self.connection_pool)
        except rpc_common.ClientException as e:
            LOG.debug(_('Expected exception during message handling (%s)') %
                      e._exc_info[1])
            ctxt.reply(None, e._exc_info,
                       connection_pool=self.connection_pool,
                       log_failure=False)
        except Exception:
            # sys.exc_info() is deleted by LOG.exception().
            exc_info = sys.exc_info()
            LOG.error(_('Exception during message handling'),
                      exc_info=exc_info)
            ctxt.reply(None, exc_info, connection_pool=self.connection_pool)

    def __call__(self, message_data):
        """Consumer callback to call a method on a proxy object.

        Parses the message for validity and fires off a thread to call the
        proxy object method.

        Message data should be a dictionary with two keys:
            method: string representing the method to call
            args: dictionary of arg: value

        Example: {'method': 'echo', 'args': {'value': 42}}

        """
        # It is important to clear the context here, because at this point
        # the previous context is stored in local.store.context
        if hasattr(local.store, 'context'):
            del local.store.context
        rpc_common._safe_log(LOG.debug, _('received %s'), message_data)
        self.msg_id_cache.check_duplicate_message(message_data)
        ctxt = unpack_context(self.conf, message_data)
        method = message_data.get('method')
        args = message_data.get('args', {})
        version = message_data.get('version')
        namespace = message_data.get('namespace')
        if not method:
            LOG.warn(_('no method for message: %s') % message_data)
            ctxt.reply(_('No method for message: %s') % message_data,
                       connection_pool=self.connection_pool)
            return
        self.pool.spawn_n(self._process_data, ctxt, version, method,
                          namespace, args)

    def consume(self, sock):
        #TODO(ewindisch): use zero-copy (i.e. references, not copying)
        data = sock.recv()
        LOG.debug(_("CONSUMER RECEIVED DATA: %s"), data)

        proxy = self.proxies[sock]

        if data[2] == 'cast':  # Legacy protocol
            packenv = data[3]

            ctx, msg = _deserialize(packenv)
            request = rpc_common.deserialize_msg(msg)
            ctx = RpcContext.unmarshal(ctx)
        elif data[2] == 'impl_zmq_v2':
            packenv = data[4:]

            msg = unflatten_envelope(packenv)
            request = rpc_common.deserialize_msg(msg)

            # Unmarshal only after verifying the message.
            ctx = RpcContext.unmarshal(data[3])
        else:
            LOG.error(_("ZMQ Envelope version unsupported or unknown."))
            return

        self.pool.spawn_n(self.process, proxy, ctx, request)

 def release(self):
     try:
         self.unlock()
         self.lockfile.close()
     except IOError:
         LOG.exception(_("Could not release the acquired lock `%s`"),
                       self.fname)
     LOG.debug(_('Released file lock "%s"'), self.fname)

 def _error_callback(exc):
     if isinstance(exc, qpid_exceptions.Empty):
         LOG.debug(_('Timed out waiting for RPC response: %s') %
                   str(exc))
         raise rpc_common.Timeout()
     else:
         LOG.exception(_('Failed to consume message from queue: %s') %
                       str(exc))

 def inner(*args, **kwargs):
     try:
         with lock(name, lock_file_prefix, external):
             LOG.debug(_('Got semaphore / lock "%(function)s"'),
                       {'function': f.__name__})
             return f(*args, **kwargs)
     finally:
         LOG.debug(_('Semaphore / lock released "%(function)s"'),
                   {'function': f.__name__})