• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    迪恩网络公众号
登陆 注册
描述文字

Python srv_control.build_and_send_config_files函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了Python中srv_control.build_and_send_config_files函数的典型用法代码示例。如果您正苦于以下问题：Python build_and_send_config_files函数的具体用法？Python build_and_send_config_files怎么用？Python build_and_send_config_files使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了build_and_send_config_files函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Python代码示例。

示例1: test_v6_relay_interface_one_subnet_not_matching_id

def test_v6_relay_interface_one_subnet_not_matching_id():

    misc.test_setup()
    srv_control.config_srv_subnet('2001:db8:1::/64', '2001:db8:1::1-2001:db8:1::10')
    srv_control.set_conf_parameter_subnet('interface-id', '"xyz"', '0')
    srv_control.build_and_send_config_files('SSH', 'config-file')
    srv_control.start_srv('DHCP', 'started')

    misc.test_procedure()
    srv_msg.client_does_include('Client', None, 'client-id')
    srv_msg.client_does_include('Client', None, 'IA-NA')
    srv_msg.client_send_msg('SOLICIT')

    srv_msg.client_sets_value('RelayAgent', 'ifaceid', 'abc')
    srv_msg.client_does_include('RelayAgent', None, 'interface-id')
    srv_msg.create_relay_forward()

    misc.pass_criteria()
    srv_msg.send_wait_for_message('MUST', None, 'RELAYREPLY')
    srv_msg.response_check_include_option('Response', None, '18')
    srv_msg.response_check_include_option('Response', None, '9')
    srv_msg.response_check_option_content('Response', '9', None, 'Relayed', 'Message')
    srv_msg.response_check_include_option('Relayed Message', None, '1')
    srv_msg.response_check_include_option('Relayed Message', None, '2')
    srv_msg.response_check_include_option('Relayed Message', None, '3')
    srv_msg.response_check_option_content('Relayed Message', '3', None, 'sub-option', '13')
    srv_msg.response_check_suboption_content('Relayed Message',
                                             '13',
                                             '3',
                                             None,
                                             'statuscode',
                                             '2')

    references.references_check('Kea')
开发者ID:isc-projects，项目名称:forge，代码行数:34，代码来源:test_v6_relay_interfaces.py


示例2: test_v6_basic_message_unicast_local_solicit

def test_v6_basic_message_unicast_local_solicit():
    #  Server MUST discard any Solicit it receives with
    #  a unicast address destination
    #  Message details 		Client		Server
    #  LINK_LOCAL_UNICAST dest  SOLICIT -->
    #  		   						 X	ADVERTISE
    #  correct message		SOLICIT -->
    #  		   						<--	ADVERTISE
    misc.test_setup()
    srv_control.config_srv_subnet('3000::/64', '3000::1-3000::ff')
    srv_control.build_and_send_config_files('SSH', 'config-file')
    srv_control.start_srv('DHCP', 'started')

    misc.test_procedure()
    srv_msg.client_requests_option('7')
    srv_msg.unicast_addres(None, 'LINK_LOCAL')
    srv_msg.client_does_include('Client', None, 'client-id')
    srv_msg.client_does_include('Client', None, 'IA-NA')
    srv_msg.client_send_msg('SOLICIT')

    misc.pass_criteria()
    srv_msg.send_dont_wait_for_message()

    misc.test_procedure()
    srv_msg.client_requests_option('7')
    srv_msg.client_does_include('Client', None, 'client-id')
    srv_msg.client_does_include('Client', None, 'IA-NA')
    srv_msg.client_send_msg('SOLICIT')

    misc.pass_criteria()
    srv_msg.send_wait_for_message('MUST', None, 'ADVERTISE')
    srv_msg.response_check_include_option('Response', None, '3')
    srv_msg.response_check_option_content('Response', '3', None, 'sub-option', '5')

    references.references_check('RFC3315')
开发者ID:isc-projects，项目名称:forge，代码行数:35，代码来源:test_v6_address.py


示例3: test_v6_client_classification_onesubnet_request_success

def test_v6_client_classification_onesubnet_request_success():

    misc.test_setup()
    srv_control.config_srv_subnet('3000::/64', '3000::1-3000::1')
    # Server is configured with client-classification option in subnet 0 with name VENDOR_CLASS_firstclass.
    srv_control.build_and_send_config_files('SSH', 'config-file')
    srv_control.start_srv('DHCP', 'started')

    misc.test_procedure()
    # Client sets vendor_class_data value to firstclass.
    # Client does include vendor-class.
    srv_msg.client_does_include('Client', None, 'client-id')
    srv_msg.client_does_include('Client', None, 'IA-NA')
    srv_msg.client_send_msg('SOLICIT')

    misc.pass_criteria()
    srv_msg.send_wait_for_message('MUST', None, 'ADVERTISE')
    srv_msg.response_check_include_option('Response', None, '3')
    srv_msg.response_check_option_content('Response', '3', None, 'sub-option', '5')
    srv_msg.response_check_suboption_content('Response', '5', '3', None, 'addr', '3000::1')

    misc.test_procedure()
    srv_msg.client_sets_value('Client', 'vendor_class_data', 'firstclass')
    srv_msg.client_does_include('Client', None, 'vendor-class')
    srv_msg.client_copy_option('IA_NA')
    srv_msg.client_copy_option('server-id')
    srv_msg.client_does_include('Client', None, 'client-id')
    srv_msg.client_send_msg('REQUEST')

    misc.pass_criteria()
    srv_msg.send_wait_for_message('MUST', None, 'REPLY')
    srv_msg.response_check_include_option('Response', None, '3')
    srv_msg.response_check_option_content('Response', '3', None, 'sub-option', '5')
    srv_msg.response_check_suboption_content('Response', '5', '3', None, 'addr', '3000::1')
开发者ID:isc-projects，项目名称:forge，代码行数:34，代码来源:test_v6_classification_request.py


示例4: test_v6_mac_in_dhcp6_any

def test_v6_mac_in_dhcp6_any():
    misc.test_setup()
    srv_control.config_srv_subnet('3000::/64', '3000::1-3000::ff')
    srv_control.run_command('"mac-sources": [ "any" ]')
    srv_control.build_and_send_config_files('SSH', 'config-file')
    srv_control.start_srv('DHCP', 'started')

    misc.test_procedure()
    srv_msg.client_sets_value('Client', 'DUID', '00:03:00:01:f6:f5:f4:f3:f2:01')
    srv_msg.client_does_include('Client', None, 'client-id')
    srv_msg.client_does_include('Client', None, 'IA-NA')
    srv_msg.client_send_msg('SOLICIT')

    misc.pass_criteria()
    srv_msg.send_wait_for_message('MUST', None, 'ADVERTISE')

    misc.test_procedure()
    srv_msg.client_copy_option('IA_NA')
    srv_msg.client_copy_option('server-id')
    srv_msg.client_sets_value('Client', 'DUID', '00:03:00:01:f6:f5:f4:f3:f2:01')
    srv_msg.client_does_include('Client', None, 'client-id')
    srv_msg.client_send_msg('REQUEST')

    misc.pass_criteria()
    srv_msg.send_wait_for_message('MUST', None, 'REPLY')
    srv_msg.file_contains_line('$(SOFTWARE_INSTALL_DIR)/var/kea/kea-leases6.csv',
                               None,
                               ',f6:f5:f4:f3:f2:01')
    srv_msg.file_contains_line('$(SOFTWARE_INSTALL_DIR)/var/kea/kea.log',
                               None,
                               'Hardware addr: f6:f5:f4:f3:f2:01')
开发者ID:isc-projects，项目名称:forge，代码行数:31，代码来源:test_mac_in_dhcp6.py


示例5: test_control_channel_keashell_dhcp_disable

def test_control_channel_keashell_dhcp_disable():
    misc.test_setup()
    srv_control.config_srv_subnet('192.168.50.0/24', '192.168.50.1-192.168.50.1')
    srv_control.open_control_channel('unix', '$(SOFTWARE_INSTALL_DIR)/var/kea/control_socket')
    srv_control.agent_control_channel('127.0.0.1',
                                      '8000',
                                      'unix',
                                      '$(SOFTWARE_INSTALL_DIR)/var/kea/control_socket')
    srv_control.build_and_send_config_files('SSH', 'config-file')

    srv_control.start_srv('DHCP', 'started')

    misc.test_procedure()
    srv_msg.client_requests_option('1')
    srv_msg.client_send_msg('DISCOVER')

    misc.pass_criteria()
    srv_msg.send_wait_for_message('MUST', None, 'OFFER')
    srv_msg.response_check_include_option('Response', None, '1')
    srv_msg.response_check_content('Response', None, 'yiaddr', '192.168.50.1')
    srv_msg.response_check_option_content('Response', '1', None, 'value', '255.255.255.0')

    srv_msg.execute_shell_with_args('python',
                                    '$(SOFTWARE_INSTALL_DIR)/sbin/kea-shell',
                                    '--host 127.0.0.1 --port 8000 --service dhcp4 dhcp-disable <<<\'\'')

    misc.test_procedure()
    srv_msg.client_requests_option('1')
    srv_msg.client_send_msg('DISCOVER')

    misc.pass_criteria()
    srv_msg.send_dont_wait_for_message()
开发者ID:isc-projects，项目名称:forge，代码行数:32，代码来源:test_command_control_keashell.py


示例6: test_v4_request_relay_initreboot_no_leases

def test_v4_request_relay_initreboot_no_leases():

    misc.test_setup()
    srv_control.config_srv_subnet('192.168.50.0/24', '192.168.50.1-192.168.50.1')
    srv_control.build_and_send_config_files('SSH', 'config-file')
    srv_control.start_srv('DHCP', 'started')

    misc.test_procedure()
    srv_msg.network_variable('source_port', '67')
    srv_msg.network_variable('source_address', '$(GIADDR4)')
    srv_msg.network_variable('destination_address', '$(SRV4_ADDR)')
    srv_msg.client_sets_value('Client', 'giaddr', '$(GIADDR4)')
    srv_msg.client_sets_value('Client', 'hops', '1')
    srv_msg.client_send_msg('REQUEST')

    misc.pass_criteria()
    srv_msg.send_dont_wait_for_message()

    misc.test_procedure()
    srv_msg.client_sets_value('Client', 'giaddr', '$(GIADDR4)')
    srv_msg.client_sets_value('Client', 'hops', '1')
    srv_msg.client_send_msg('DISCOVER')

    misc.pass_criteria()
    srv_msg.send_wait_for_message('MUST', None, 'OFFER')
开发者ID:isc-projects，项目名称:forge，代码行数:25，代码来源:test_v4_request_relay_part2.py


示例7: test_hook_v4_lease_cmds_add_valid

def test_hook_v4_lease_cmds_add_valid():
    misc.test_setup()
    srv_control.config_srv_subnet('192.168.50.0/24', '192.168.50.5-192.168.50.5')
    srv_control.open_control_channel('unix', '$(SOFTWARE_INSTALL_DIR)/var/kea/control_socket')
    srv_control.add_hooks('$(SOFTWARE_INSTALL_DIR)/lib/kea/hooks/libdhcp_lease_cmds.so')
    srv_control.build_and_send_config_files('SSH', 'config-file')

    srv_control.start_srv('DHCP', 'started')

    misc.test_procedure()
    srv_msg.client_requests_option('1')
    srv_msg.client_send_msg('DISCOVER')

    misc.pass_criteria()
    srv_msg.send_wait_for_message('MUST', None, 'OFFER')
    srv_msg.response_check_include_option('Response', None, '1')
    srv_msg.response_check_content('Response', None, 'yiaddr', '192.168.50.5')
    srv_msg.response_check_option_content('Response', '1', None, 'value', '255.255.255.0')

    srv_msg.send_through_socket_server_site('$(SOFTWARE_INSTALL_DIR)/var/kea/control_socket',
                                            '{"command": "lease4-add","arguments": {"subnet-id": 1,"ip-address": "192.168.50.5","hw-address": "1a:1b:1c:1d:1e:1f"}}')

    misc.test_procedure()
    srv_msg.client_requests_option('1')
    srv_msg.client_sets_value('Client', 'chaddr', 'ff:01:02:03:ff:04')
    srv_msg.client_send_msg('DISCOVER')

    misc.pass_criteria()
    srv_msg.send_dont_wait_for_message()
开发者ID:isc-projects，项目名称:forge，代码行数:29，代码来源:test_leases_cmds.py


示例8: test_v4_echo_client_id_enabled

def test_v4_echo_client_id_enabled():
    misc.test_setup()
    srv_control.config_srv_subnet('192.168.50.0/24', '192.168.50.1-192.168.50.1')
    srv_control.set_conf_parameter_global('echo-client-id', 'true')
    srv_control.build_and_send_config_files('SSH', 'config-file')
    srv_control.start_srv('DHCP', 'started')

    misc.test_procedure()
    srv_msg.client_requests_option('1')
    srv_msg.client_does_include_with_value('client_id', '00010203040506')
    srv_msg.client_send_msg('DISCOVER')

    misc.pass_criteria()
    srv_msg.send_wait_for_message('MUST', None, 'OFFER')
    srv_msg.response_check_include_option('Response', None, '1')
    srv_msg.response_check_include_option('Response', None, '61')
    srv_msg.response_check_option_content('Response', '61', None, 'value', '00010203040506')

    misc.test_procedure()
    srv_msg.client_does_include_with_value('client_id', '00010203040506')
    srv_msg.client_copy_option('server_id')
    srv_msg.client_does_include_with_value('requested_addr', '192.168.50.1')
    srv_msg.client_requests_option('1')
    srv_msg.client_send_msg('REQUEST')

    misc.pass_criteria()
    srv_msg.send_wait_for_message('MUST', None, 'ACK')
    srv_msg.response_check_content('Response', None, 'yiaddr', '192.168.50.1')
    srv_msg.response_check_include_option('Response', None, '1')
    srv_msg.response_check_include_option('Response', None, '61')
    srv_msg.response_check_option_content('Response', '61', None, 'value', '00010203040506')
开发者ID:isc-projects，项目名称:forge，代码行数:31，代码来源:test_server_conf.py


示例9: test_v6_client_classification_onesubnet_eRouter1_0_request_fail

def test_v6_client_classification_onesubnet_eRouter1_0_request_fail():

    misc.test_setup()
    srv_control.config_srv_subnet('3000::/64', '3000::1-3000::1')
    srv_control.config_client_classification('0', 'VENDOR_CLASS_eRouter1.0')
    srv_control.build_and_send_config_files('SSH', 'config-file')
    srv_control.start_srv('DHCP', 'started')

    misc.test_procedure()
    srv_msg.client_requests_option('7')
    srv_msg.client_sets_value('Client', 'vendor_class_data', 'eRouter1.0')
    srv_msg.client_does_include('Client', None, 'vendor-class')
    srv_msg.client_does_include('Client', None, 'client-id')
    srv_msg.client_does_include('Client', None, 'IA-NA')
    srv_msg.client_send_msg('SOLICIT')

    misc.pass_criteria()
    srv_msg.send_wait_for_message('MUST', None, 'ADVERTISE')
    srv_msg.response_check_include_option('Response', None, '3')
    srv_msg.response_check_option_content('Response', '3', None, 'sub-option', '5')
    srv_msg.response_check_suboption_content('Response', '5', '3', None, 'addr', '3000::1')

    misc.test_procedure()
    srv_msg.client_copy_option('IA_NA')
    srv_msg.client_copy_option('server-id')
    srv_msg.client_does_include('Client', None, 'client-id')
    srv_msg.client_send_msg('REQUEST')

    misc.pass_criteria()
    srv_msg.send_wait_for_message('MUST', None, 'REPLY')
    srv_msg.response_check_include_option('Response', None, '3')
    srv_msg.response_check_option_content('Response', '3', None, 'sub-option', '13')
    srv_msg.response_check_suboption_content('Response', '13', '3', None, 'statuscode', '2')
开发者ID:isc-projects，项目名称:forge，代码行数:33，代码来源:test_v6_classification_default_classes.py


示例10: test_hook_v4_subnet_cmds_add

def test_hook_v4_subnet_cmds_add():
    misc.test_setup()
    srv_control.config_srv_subnet('$(EMPTY)', '$(EMPTY)')
    srv_control.config_srv_opt('domain-name-servers', '199.199.199.1,100.100.100.1')
    srv_control.open_control_channel('unix', '$(SOFTWARE_INSTALL_DIR)/var/kea/control_socket')
    srv_control.add_hooks('$(SOFTWARE_INSTALL_DIR)/lib/kea/hooks/libdhcp_subnet_cmds.so')
    srv_control.build_and_send_config_files('SSH', 'config-file')

    srv_control.start_srv('DHCP', 'started')

    misc.test_procedure()
    srv_msg.client_requests_option('1')
    srv_msg.client_sets_value('Client', 'chaddr', 'ff:01:02:03:ff:04')
    srv_msg.client_send_msg('DISCOVER')

    misc.pass_criteria()
    srv_msg.send_dont_wait_for_message()

    # Using UNIX socket on server in path $(SOFTWARE_INSTALL_DIR)/var/kea/control_socket send {"command":"subnet4-list","arguments":{}}
    srv_msg.send_through_socket_server_site('$(SOFTWARE_INSTALL_DIR)/var/kea/control_socket',
                                            '{"command":"subnet4-add","arguments":{"subnet4":[{"subnet":"192.168.50.0/24","interface":"$(SERVER_IFACE)","id":234,"pools":[{"pool":"192.168.50.1-192.168.50.1"}]}]}}')
    srv_msg.send_through_socket_server_site('$(SOFTWARE_INSTALL_DIR)/var/kea/control_socket',
                                            '{"command":"subnet4-get","arguments":{"id": 234}}')

    misc.test_procedure()
    srv_msg.client_requests_option('1')
    srv_msg.client_send_msg('DISCOVER')

    misc.pass_criteria()
    srv_msg.send_wait_for_message('MUST', None, 'OFFER')
    srv_msg.response_check_include_option('Response', None, '1')
    srv_msg.response_check_content('Response', None, 'yiaddr', '192.168.50.1')
    srv_msg.response_check_option_content('Response', '1', None, 'value', '255.255.255.0')
开发者ID:isc-projects，项目名称:forge，代码行数:33，代码来源:test_subnet_cmds.py


示例11: test_v4_host_reservation_one_address_outside_pool

def test_v4_host_reservation_one_address_outside_pool():
    misc.test_setup()
    # outside of the pool
    srv_control.config_srv_subnet('192.168.50.0/24', '192.168.50.30-192.168.50.50')
    srv_control.host_reservation_in_subnet('address',
                                           '192.168.50.10',
                                           '0',
                                           'hw-address',
                                           'ff:01:02:03:ff:04')
    srv_control.build_and_send_config_files('SSH', 'config-file')
    srv_control.start_srv('DHCP', 'started')

    misc.test_procedure()
    srv_msg.client_sets_value('Client', 'chaddr', 'ff:01:02:03:ff:04')
    srv_msg.client_send_msg('DISCOVER')

    misc.pass_criteria()
    srv_msg.send_wait_for_message('MUST', None, 'OFFER')
    srv_msg.response_check_content('Response', None, 'yiaddr', '192.168.50.10')
    srv_msg.response_check_option_content('Response', '1', None, 'value', '255.255.255.0')

    misc.test_procedure()
    srv_msg.client_copy_option('server_id')
    srv_msg.client_does_include_with_value('requested_addr', '192.168.50.10')
    srv_msg.client_sets_value('Client', 'chaddr', 'ff:01:02:03:ff:04')
    srv_msg.client_send_msg('REQUEST')

    misc.pass_criteria()
    srv_msg.send_wait_for_message('MUST', None, 'ACK')
    srv_msg.response_check_content('Response', None, 'yiaddr', '192.168.50.10')
    srv_msg.response_check_include_option('Response', None, '1')
    srv_msg.response_check_option_content('Response', '1', None, 'value', '255.255.255.0')
开发者ID:isc-projects，项目名称:forge，代码行数:32，代码来源:test_host_reservation_address.py


示例12: test_hook_v4_subnet_cmds_del_global_options

def test_hook_v4_subnet_cmds_del_global_options():
    misc.test_setup()
    srv_control.config_srv_subnet('192.168.51.0/24', '192.168.51.1-192.168.51.1')
    srv_control.config_srv_opt('domain-name-servers', '199.199.199.1,100.100.100.1')
    srv_control.open_control_channel('unix', '$(SOFTWARE_INSTALL_DIR)/var/kea/control_socket')
    srv_control.add_hooks('$(SOFTWARE_INSTALL_DIR)/lib/kea/hooks/libdhcp_subnet_cmds.so')
    srv_control.build_and_send_config_files('SSH', 'config-file')

    srv_control.start_srv('DHCP', 'started')

    misc.test_procedure()
    srv_msg.client_requests_option('1')
    srv_msg.client_requests_option('6')
    srv_msg.client_sets_value('Client', 'chaddr', 'ff:01:02:03:ff:04')
    srv_msg.client_send_msg('DISCOVER')

    misc.pass_criteria()
    srv_msg.send_wait_for_message('MUST', None, 'OFFER')
    srv_msg.response_check_include_option('Response', None, '1')
    srv_msg.response_check_content('Response', None, 'yiaddr', '192.168.51.1')
    srv_msg.response_check_option_content('Response', '1', None, 'value', '255.255.255.0')

    srv_msg.send_through_socket_server_site('$(SOFTWARE_INSTALL_DIR)/var/kea/control_socket',
                                            '{"command": "subnet4-del","arguments":{"id":1}}')

    misc.test_procedure()
    srv_msg.client_requests_option('1')
    srv_msg.client_sets_value('Client', 'chaddr', 'ff:01:02:03:ff:04')
    srv_msg.client_send_msg('DISCOVER')

    misc.pass_criteria()
    srv_msg.send_dont_wait_for_message()
开发者ID:isc-projects，项目名称:forge，代码行数:32，代码来源:test_subnet_cmds.py


示例13: test_v4_client_classification_one_class_eRouter1_global_next_server

def test_v4_client_classification_one_class_eRouter1_global_next_server():

    misc.test_setup()
    srv_control.config_srv_subnet('192.168.50.0/24', '192.168.50.1-192.168.50.1')
    srv_control.config_client_classification('0', 'VENDOR_CLASS_eRouter1.0')
    srv_control.config_srv_another_subnet_no_interface('192.168.50.0/24',
                                                       '192.168.50.100-192.168.50.100')
    srv_control.config_srv('boot-file-name', '0', 'somefilename')
    srv_control.global_add_siaddr('192.0.2.2')
    srv_control.build_and_send_config_files('SSH', 'config-file')
    srv_control.start_srv('DHCP', 'started')

    misc.test_procedure()
    srv_msg.client_sets_value('Client', 'chaddr', '00:00:00:00:00:00')
    srv_msg.client_does_include_with_value('client_id', '00010203040506')
    srv_msg.client_does_include_with_value('vendor_class_id', 'eRouter1.0')
    srv_msg.client_requests_option('1')
    srv_msg.client_send_msg('DISCOVER')

    misc.pass_criteria()
    srv_msg.send_wait_for_message('MUST', None, 'OFFER')
    srv_msg.response_check_content('Response', 'NOT ', 'file', 'somefilename')
    srv_msg.response_check_content('Response', None, 'yiaddr', '192.168.50.1')
    srv_msg.response_check_content('Response', None, 'siaddr', '0.0.0.0')
    srv_msg.response_check_content('Response', 'NOT ', 'siaddr', '192.0.2.2')

    srv_msg.response_check_include_option('Response', None, '1')
    srv_msg.response_check_include_option('Response', None, '54')
    srv_msg.response_check_include_option('Response', None, '61')
    srv_msg.response_check_option_content('Response', '1', None, 'value', '255.255.255.0')
    srv_msg.response_check_option_content('Response', '54', None, 'value', '$(SRV4_ADDR)')
    srv_msg.response_check_option_content('Response', '61', None, 'value', '00010203040506')
开发者ID:isc-projects，项目名称:forge，代码行数:32，代码来源:test_v4_classification_default_classes.py


示例14: test_user_check_hook_IA_NA_with_registry_known_user

def test_user_check_hook_IA_NA_with_registry_known_user():
    # With a user registry and multiple subnets
    # an known user should get first subnet

    misc.test_setup()
    srv_msg.send_file_to_server('tests/dhcpv6/kea_only/user_chk/registry_1.txt',
                                '/tmp/user_chk_registry.txt')
    srv_msg.remove_file_from_server('/tmp/user_chk_outcome.txt')
    srv_control.config_srv_subnet('3000::/64', '3000::5-3000::5')
    srv_control.config_srv_another_subnet_no_interface('1000::/64', '1000::5-1000::5')
    srv_control.add_hooks('$(SOFTWARE_INSTALL_DIR)/lib/kea/hooks/libdhcp_user_chk.so')
    srv_control.build_and_send_config_files('SSH', 'config-file')
    srv_control.start_srv('DHCP', 'started')

    misc.test_procedure()
    # Send a query from a registered user
    srv_msg.client_sets_value('Client', 'DUID', '00:03:00:01:11:02:03:04:05:06')
    srv_msg.client_does_include('Client', None, 'client-id')
    srv_msg.client_does_include('Client', None, 'IA-NA')
    srv_msg.client_send_msg('SOLICIT')

    misc.pass_criteria()
    srv_msg.send_wait_for_message('MUST', None, 'ADVERTISE')
    srv_msg.response_check_include_option('Response', None, '3')
    srv_msg.response_check_option_content('Response', '3', None, 'sub-option', '5')
    srv_msg.response_check_suboption_content('Response', '5', '3', None, 'addr', '3000::5')
    # Check the outcome file for correct content
    srv_msg.copy_remote('/tmp/user_chk_outcome.txt')
    srv_msg.compare_file('tests/dhcpv6/kea_only/user_chk/outcome_2.txt')
开发者ID:isc-projects，项目名称:forge，代码行数:29，代码来源:test_v6_user_check_general.py


示例15: test_user_check_IA_NA_with_registry_known_user

def test_user_check_IA_NA_with_registry_known_user():
    # With a user registry and multiple subnets
    # an known user should get first subnet

    misc.test_setup()
    srv_msg.send_file_to_server('tests/dhcpv4/kea_only/user_chk/registry_1.txt',
                                '/tmp/user_chk_registry.txt')
    srv_msg.remove_file_from_server('/tmp/user_chk_outcome.txt')
    srv_control.config_srv_subnet('192.168.50.0/24', '192.168.50.5-192.168.50.5')
    srv_control.config_srv_another_subnet_no_interface('10.0.0.0/24', '10.0.0.5-10.0.0.5')
    srv_control.add_hooks('$(SOFTWARE_INSTALL_DIR)/lib/kea/hooks/libdhcp_user_chk.so')
    srv_control.build_and_send_config_files('SSH', 'config-file')
    srv_control.start_srv('DHCP', 'started')

    misc.test_procedure()
    srv_msg.client_requests_option('1')
    srv_msg.client_sets_value('Client', 'chaddr', '0c:0e:0a:01:ff:04')
    srv_msg.client_send_msg('DISCOVER')

    misc.pass_criteria()
    srv_msg.send_wait_for_message('MUST', None, 'OFFER')
    srv_msg.response_check_include_option('Response', None, '1')
    srv_msg.response_check_content('Response', None, 'yiaddr', '192.168.50.5')
    srv_msg.response_check_option_content('Response', '1', None, 'value', '255.255.255.0')

    # Check the outcome file for correct content
    srv_msg.copy_remote('/tmp/user_chk_outcome.txt')
    srv_msg.compare_file('tests/dhcpv4/kea_only/user_chk/outcome_2.txt')
开发者ID:isc-projects，项目名称:forge，代码行数:28，代码来源:test_v4_user_check_general.py


示例16: test_v4_options_vendor_encapsulated_space

def test_v4_options_vendor_encapsulated_space():

    misc.test_setup()
    srv_control.config_srv_subnet('192.168.50.0/24', '192.168.50.50-192.168.50.50')
    srv_control.config_srv_custom_opt_space('vendor-encapsulated-options-space',
                                            'foo',
                                            '1',
                                            'uint16',
                                            '66')
    srv_control.config_srv_opt('vendor-encapsulated-options', '$(EMPTY)')
    srv_control.build_and_send_config_files('SSH', 'config-file')
    srv_control.start_srv('DHCP', 'started')

    misc.test_procedure()
    srv_msg.client_sets_value('Client', 'chaddr', 'ff:01:02:03:ff:04')
    srv_msg.client_requests_option('43')
    srv_msg.client_does_include_with_value('client_id', 'ff:01:02:03:ff:04:11:22')
    srv_msg.client_send_msg('DISCOVER')

    misc.pass_criteria()
    srv_msg.send_wait_for_message('MUST', None, 'OFFER')
    srv_msg.response_check_content('Response', None, 'yiaddr', '192.168.50.50')
    srv_msg.response_check_include_option('Response', None, '43')
    # option 43 should have suboption code: 1 length: 2 with value 66 (hex:42)
    srv_msg.response_check_option_content('Response', '43', None, 'value', 'HEX:01020042')
开发者ID:isc-projects，项目名称:forge，代码行数:25，代码来源:test_v4_vendor_options.py


示例17: test_v6_relay_invalid_options_reconfigure_accept

def test_v6_relay_invalid_options_reconfigure_accept():

    misc.test_setup()
    srv_control.config_srv_subnet('3000::/64', '3000::1-3000::ff')
    srv_control.build_and_send_config_files('SSH', 'config-file')
    srv_control.start_srv('DHCP', 'started')

    misc.test_procedure()
    srv_msg.client_does_include('Client', None, 'client-id')
    srv_msg.client_does_include('Client', None, 'IA-NA')
    srv_msg.client_send_msg('SOLICIT')

    # add options to relay message
    srv_msg.client_does_include('RelayAgent', None, 'reconfigure-accept')
    srv_msg.client_does_include('RelayAgent', None, 'interface-id')
    srv_msg.create_relay_forward()

    misc.pass_criteria()
    srv_msg.send_dont_wait_for_message()

    misc.test_procedure()
    srv_msg.client_does_include('Client', None, 'client-id')
    srv_msg.client_does_include('Client', None, 'IA-NA')
    srv_msg.client_send_msg('SOLICIT')

    srv_msg.client_does_include('RelayAgent', None, 'interface-id')
    srv_msg.create_relay_forward()

    misc.pass_criteria()
    srv_msg.send_wait_for_message('MUST', None, 'RELAYREPLY')
    srv_msg.response_check_include_option('Response', None, '18')
    srv_msg.response_check_include_option('Response', None, '9')

    references.references_check('RFC3315')
开发者ID:isc-projects，项目名称:forge，代码行数:34，代码来源:test_v6_relay_invalid.py


示例18: test_v4_request_relay_selecting_success_chaddr

def test_v4_request_relay_selecting_success_chaddr():

    misc.test_setup()
    srv_control.config_srv_subnet('192.168.50.0/24', '192.168.50.1-192.168.50.1')
    srv_control.build_and_send_config_files('SSH', 'config-file')
    srv_control.start_srv('DHCP', 'started')

    misc.test_procedure()
    srv_msg.network_variable('source_port', '67')
    srv_msg.network_variable('source_address', '$(GIADDR4)')
    srv_msg.network_variable('destination_address', '$(SRV4_ADDR)')
    srv_msg.client_sets_value('Client', 'giaddr', '$(GIADDR4)')
    srv_msg.client_sets_value('Client', 'hops', '1')
    srv_msg.client_requests_option('1')
    srv_msg.client_send_msg('DISCOVER')

    misc.pass_criteria()
    srv_msg.send_wait_for_message('MUST', None, 'OFFER')
    srv_msg.response_check_include_option('Response', None, '1')
    srv_msg.response_check_content('Response', None, 'yiaddr', '192.168.50.1')
    srv_msg.response_check_option_content('Response', '1', None, 'value', '255.255.255.0')

    misc.test_procedure()
    srv_msg.client_sets_value('Client', 'giaddr', '$(GIADDR4)')
    srv_msg.client_sets_value('Client', 'hops', '1')
    srv_msg.client_copy_option('server_id')
    srv_msg.client_does_include_with_value('requested_addr', '192.168.50.1')
    srv_msg.client_requests_option('1')
    srv_msg.client_send_msg('REQUEST')

    misc.pass_criteria()
    srv_msg.send_wait_for_message('MUST', None, 'ACK')
    srv_msg.response_check_content('Response', None, 'yiaddr', '192.168.50.1')
    srv_msg.response_check_include_option('Response', None, '1')
    srv_msg.response_check_option_content('Response', '1', None, 'value', '255.255.255.0')
开发者ID:isc-projects，项目名称:forge，代码行数:35，代码来源:test_v4_request_relay_part1.py


示例19: test_v6_rapid_commit_basic_one_subnet_rapid_not_included

def test_v6_rapid_commit_basic_one_subnet_rapid_not_included():
    misc.test_setup()
    srv_control.config_srv_subnet('3000::/64', '3000::1-3000::ff')
    srv_control.set_conf_parameter_subnet('rapid-commit', 'true', '0')
    srv_control.build_and_send_config_files('SSH', 'config-file')
    srv_control.start_srv('DHCP', 'started')

    misc.test_procedure()
    srv_msg.client_does_include('Client', None, 'client-id')
    srv_msg.client_does_include('Client', None, 'IA-NA')
    srv_msg.client_send_msg('SOLICIT')

    misc.pass_criteria()
    srv_msg.send_wait_for_message('MUST', None, 'ADVERTISE')
    srv_msg.response_check_include_option('Response', None, '1')
    srv_msg.response_check_include_option('Response', None, '2')
    srv_msg.response_check_include_option('Response', None, '3')
    srv_msg.response_check_option_content('Response', '3', None, 'sub-option', '5')
    srv_msg.response_check_include_option('Response', 'NOT ', '14')

    misc.test_procedure()
    srv_msg.client_copy_option('server-id')
    srv_msg.client_copy_option('IA_NA')
    srv_msg.client_does_include('Client', None, 'client-id')
    srv_msg.client_send_msg('REQUEST')

    misc.pass_criteria()
    srv_msg.send_wait_for_message('MUST', None, 'REPLY')
    srv_msg.response_check_include_option('Response', None, '1')
    srv_msg.response_check_include_option('Response', None, '2')
    srv_msg.response_check_include_option('Response', None, '3')
    srv_msg.response_check_option_content('Response', '3', None, 'sub-option', '5')
    srv_msg.response_check_include_option('Response', 'NOT ', '14')
开发者ID:isc-projects，项目名称:forge，代码行数:33，代码来源:test_v6_rapid.py


示例20: test_v4_loggers_bad_packets_info

def test_v4_loggers_bad_packets_info():
    misc.test_setup()
    srv_control.config_srv_subnet('192.168.50.0/24', '192.168.50.1-192.168.50.1')
    srv_control.configure_loggers('kea-dhcp4.bad-packets', 'INFO', 'None', 'kea.log')
    srv_control.build_and_send_config_files('SSH', 'config-file')
    srv_control.start_srv('DHCP', 'started')

    misc.test_procedure()
    srv_msg.client_requests_option('1')
    srv_msg.client_requests_option('2')
    srv_msg.client_requests_option('7')
    srv_msg.client_send_msg('DISCOVER')

    misc.pass_criteria()
    srv_msg.send_wait_for_message('MUST', None, 'OFFER')
    srv_msg.response_check_include_option('Response', None, '1')
    srv_msg.response_check_content('Response', None, 'yiaddr', '192.168.50.1')
    srv_msg.response_check_option_content('Response', '1', None, 'value', '255.255.255.0')

    misc.test_procedure()
    srv_msg.client_copy_option('server_id')
    srv_msg.client_does_include_with_value('requested_addr', '192.168.50.100')
    srv_msg.client_requests_option('1')
    srv_msg.client_send_msg('REQUEST')

    misc.pass_criteria()
    srv_msg.send_wait_for_message('MUST', None, 'NAK')
    srv_msg.file_contains_line('$(SOFTWARE_INSTALL_DIR)/var/kea/kea.log',
                               'NOT ',
                               r'DEBUG \[kea-dhcp4.bad-packets')
开发者ID:isc-projects，项目名称:forge，代码行数:30，代码来源:test_kea_logging.py



注：本文中的srv_control.build_and_send_config_files函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
Python srv_control.config_srv_opt函数代码示例发布时间：2022-05-27
下一篇：
Python srv_control.add_hooks函数代码示例发布时间：2022-05-27
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap