本文整理汇总了Python中sut.failure函数的典型用法代码示例。如果您正苦于以下问题：Python failure函数的具体用法？Python failure怎么用？Python failure使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了failure函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Python代码示例。
示例1: action
def action():
global actCount, bugs, failPool
act = sut.randomEnabled(rgen)
actCount += 1
ok = sut.safely(act)
if running == 1:
if len(sut.newBranches()) > 0:
print "ACTION:", act[0]
for b in sut.newBranches():
print time.time() - start, len(sut.allBranches()), "New branch", b
for s in sut.newStatements():
print time.time() - start, len(sut.allStatements()),"New statement",s
if not ok:
if faults:
bugs += 1
print "FOUND A FAILURE"
print sut.failure()
print "REDUCING"
failPool.append(sut.test())
collectCoverage()
R = sut.reduce(sut.test(),sut.fails, True, True)
sut.prettyPrintTest(R)
print sut.failure()
fname="failure" + str(bugs) + ".test"
sut.saveTest(sut.test(),fname)
errorSeqs.append(sut.currStatements())
sut.restart()
else:
expand()
return ok
开发者ID:agroce，项目名称:cs569sp16，代码行数:32，代码来源:tester2.py
示例2: randomAction
def randomAction():
global actCount, bugs,newseq,currseq
act = sut.randomEnabled(R)
actCount += 1
ok = sut.safely(act)
if running:
if len(sut.newBranches()) > 0:
print "ACTION:",sut.randomEnabled(random.Random(seed))[0]
for b in sut.newBranches():
print time.time() - start, len(sut.allBranches()),"New branch",b
for s1 in sut.newStatements():
print time.time() - start, len(sut.allStatements()),"New statement",s1
if not ok:
bugs += 1
print "FOUND A FAILURE"
if faults:
f = sut.reduce(sut.test(), sut.fails, True, True)
sut.prettyPrintTest(f)
currseq.append((f,set(sut.currStatements())))
print("SHOW FAULT")
file = 'failure' + str(actCount) + '.test'
sut.saveTest(sut.test(), file)
sut.restart()
print sut.failure()
return ok
开发者ID:agroce，项目名称:cs569sp16，代码行数:29，代码来源:tester2.py
示例3: action
def action():
global actCount, bugs, failPool
act = sut.randomEnabled(rgen)
actCount += 1
ok = sut.safely(act)
if running == 1:
if len(sut.newBranches()) > 0:
print "ACTION:", act[0]
for b in sut.newBranches():
print time.time() - start, len(sut.allBranches()), "New branch", b
if faults:
if not ok:
bugs += 1
print "FOUND A FAILURE"
print sut.failure()
print "REDUCING"
failPool.append(sut.test())
collectCoverage()
R = sut.reduce(sut.test(),sut.fails, True, True)
sut.prettyPrintTest(R)
print sut.failure()
f = open(("failure" + str(bugs) + ".test"),"w")
f.writelines(str(sut.failure()))
f.close()
sut.restart()
else:
expand()
return ok
开发者ID:agroce，项目名称:cs569sp16，代码行数:31，代码来源:tester1.py
示例4: randomAction
def randomAction():
global actCount, bugs, coverageCount, belowMean,lastAddCoverage
act = sut.randomEnabled(random.Random())
actCount += 1
ok = sut.safely(act)
if running:
if len(sut.newBranches()) > 0:
print "ACTION:",sut.randomEnabled(random.Random(seed))[0]
for b in sut.newBranches():
print time.time() - start, len(sut.allBranches()),"New branch",b
for s1 in sut.newStatements():
print time.time() - start, len(sut.allStatements()),"New statement",b
if not ok or not sut.check():
bugs += 1
print "FOUND A FAILURE"
if faults:
print("SHOW FAULT")
print sut.failure()
error.append(sut.test())
R = sut.reduce(sut.test(),sut.fails, True, True)
sut.prettyPrintTest(R)
print sut.failure()
sut.restart()
return ok
开发者ID:agroce，项目名称:cs569sp16，代码行数:28，代码来源:tester1.py
示例5: randomAction
def randomAction():
global bug_no, time_start, allAction, ii
action = sut.randomEnabled(rand)
ok = sut.safely(action)
elapsed = time.time() - time_start
if RUNNING_DETAIL:
if len(sut.newBranches()) > 0:
print "ACTION:", action[0]
for b in sut.newBranches():
print elapsed, len(sut.allBranches()), "New branch", b
if not ok: # found a bug
bug_no += 1
print "FOUND A BUG! #", bug_no
print sut.failure()
print("REDUCING")
reduce = sut.reduce(sut.test(), sut.fails, True, True)
sut.prettyPrintTest(reduce)
print(sut.failure())
# write the bug to file if FAULT_ARGUMENT is enabled
if (FAULT_CHECK):
f = open((failure_file + str(bug_no) + ".test"), "w")
print >> f, sut.failure()
# print sequence that causes failure
j = 0
for (s_reduces, _, _) in reduce:
steps_reduce = "# STEP " + str(j)
print >> f, sut.prettyName(s_reduces).ljust(80 - len(steps_reduce), ' '), steps_reduce
j += 1
f.close()
print "time: ", time.time() - time_start
return ok
开发者ID:Cianna，项目名称:cs569sp16，代码行数:33，代码来源:tester1.py
示例6: tester
def tester():
global sut,act,n,test,para,lCovered,actNum,bugs,M,flag, filename
act = sut.randomEnabled(rgen)
flag = 0
n = sut.safely(act)
if running:
if sut.newBranches() != set([]):
for d in sut.newBranches():
print time.time() - start, len(sut.allBranches()),"New branch",d
if len(sut.newStatements()) > 0:
test = sut.state()
para = True
print sut.newStatements()
if (para == False):
if (lCovered != None):
if (lCovered in sut.currStatements()):
test = sut.state()
para = True
actNum += 1
if (n == 0):
bugs += 1
print "A failure has been found!", bugs
print sut.failure()
M = sut.reduce(sut.test(),sut.fails, True, True)
sut.prettyPrintTest(M)
print sut.failure()
filename ='failure%d.test'%bugs
sut.saveTest(M,filename)
flag = 1
开发者ID:agroce，项目名称:cs569sp16，代码行数:29，代码来源:tester2.py
示例7: Find_bugs
def Find_bugs(list_actions):
# print "Find_bugs"
global coverage_counter
global bugs
global Record
global string
safe = sut.safely(list_actions)
running_oh()
if not safe:
bugs = bugs + 1
print " *** find a bug: ",bugs
# bugs = bugs + 1
for t in sut.currStatements():
if t not in coverage_counter:
coverage_counter[t]=0
coverage_counter[t] = coverage_counter[t] + 1
# Collect_coverage()
print sut.failure()
# string = str(sut.failure)
Record = True
print "reducing..."
R = sut.reduce(sut.test(),sut.fails, True, True)
sut.prettyPrintTest(R)
# record_failures(R)
if FAULTS:
print"create file"
# for x in xrange(1,bugs):
# print "save"
sut.saveTest(R, failure + str(bugs)+ ".test")
# filename = "failure" + str(bugs) + ".test"
# sut.saveTest(sut.test(), filename)
# sut.restart()
return safe
开发者ID:agroce，项目名称:cs569sp16，代码行数:33，代码来源:tester2.py
示例8: newState
def newState():
global rgen,sut,collected_test,storedTest,action_cnt,bugfound
for i in xrange(0,DEPTH):
action = sut.randomEnabled(rgen)
no_bug_found = sut.safely(action)
if RUNNING:
if sut.newBranches() != set([]):
for d in sut.newBranches():
print time.time() - start,len(sut.allBranches()),"New Branches",d
if len(sut.newStatements()) > 0:
collected_test = sut.state()
storedTest = True
print "new statement:",sut.newStatements()
if (not storedTest) and (lst_coverage != None) and (lst_coverage in sut.currStatements()):
collected_test = sut.state()
storedTest = True
action_cnt += 1
if not no_bug_found:
bugfound += 1
print "A failure happened here."
rds = sut.reduce(sut.test(),sut.fails, True, True)
sut.prettyPrintTest(rds)
print sut.failure()
break
开发者ID:agroce，项目名称:cs569sp16，代码行数:25，代码来源:tester1.py
示例9: notOK
def notOK():
global bugs, sut
bugs += 1
print "FOUND A FAILURE"
print sut.failure()
print "REDUCING"
R = sut.reduce(sut.test(), sut.fails, True, True)
sut.prettyPrintTest(R)
print sut.failure()
开发者ID:Cianna，项目名称:cs569sp16，代码行数:9，代码来源:tester1.py
示例10: failures
def failures(sut,bugs, Config, faults_file):
bugs +=1
print "FOUND A FAILURE"
print sut.failure()
print "REDUCING"
failPool.append(sut.test())
collectCoverage()
R = sut.reduce(sut.test(), sut.fails, True, True)
sut.prettyPrintTest(R)
print sut.failure()
开发者ID:agroce，项目名称:cs569sp16，代码行数:11，代码来源:tester2.py
示例11: main
def main():
global config,rgen,actCount,failCount,ntests,coverageCount
parsed_args, parser = parse_args()
config = make_config(parsed_args, parser)
rgen = random.Random(config.seed)
actCount = 0
failCount = 0
coverageCount = {}
start = time.time()
ntests = 0
while True:
elapsed = time.time() - start
if elapsed > config.timeout:
print "STOPPING TEST DUE TO TIMEOUT, TERMINATED AT LENGTH",ntests
break
for i in xrange(0, config.depth):
sut.restart()
ntests += 1
for j in xrange(0, config.width):
act = sut.randomEnabled(rgen)
actCount += 1
ok = sut.safely(act)
if not ok:
failCount += 1
print "FOUND A FAILURE"
collectCoverage()
R = sut.reduce(sut.test(),sut.fails, True, True)
sut.prettyPrintTest(R)
print sut.failure()
break
if config.running:
if sut.newBranches() != set([]):
for b in sut.newBranches():
print time.time()-start, len(sut.allBranches()), "New branch", b
if sut.newStatements() != set([]):
for s in sut.newStatements():
print time.time()-start,len(sut.allStatements()),"New statement",s
collectCoverage()
if config.faults:
print "TOTAL FAULTS", failCount
if config.coverage:
print len(sut.allBranches()),"BRANCHES COVERED"
print len(sut.allStatements()),"STATEMENTS COVERED"
print "TOTAL ACTIONS",actCount
print "TOTAL RUNTIME",time.time()-start
开发者ID:Cianna，项目名称:cs569sp16，代码行数:54，代码来源:tester1.py
示例12: main
def main():
global config,rgen,actCount,failCount,ntests,fullPool
parsed_args, parser = parse_args()
config = make_config(parsed_args, parser)
rgen = random.Random(config.seed)
actCount = 0
failCount = 0
fullPool = []
start = time.time()
ntests = 0
while time.time() - start < config.timeout:
ntests += 1
sut.restart()
for d in xrange(0, config.depth):
act = sut.randomEnabled(rgen)
actCount += 1
ok = sut.safely(act)
expandPool()
if config.running:
if sut.newBranches() != set([]):
for b in sut.newBranches():
print time.time()-start, len(sut.allBranches()), "New branch", b
if sut.newStatements() != set([]):
for s in sut.newStatements():
print time.time()-start, len(sut.allStatements()),"New statement",s
if not ok:
failCount += 1
if config.faults:
failureHandle(failCount)
print "FOUND A FAILURE"
R = sut.reduce(sut.test(),sut.fails, True, True)
sut.prettyPrintTest(R)
print sut.failure()
sut.restart()
break
if time.time() - start > config.timeout:
print "STOPPING TEST DUE TO TIMEOUT, TERMINATED AT LENGTH",ntests
break
if config.faults:
print "TOTAL FAULTS", failCount
if config.coverage:
sut.internalReport()
print "TOTAL ACTIONS",actCount
print "TOTAL RUNTIME",time.time()-start
开发者ID:agroce，项目名称:cs569sp16，代码行数:53，代码来源:tester1.py
示例13: failure
def failure():
global bugs, failPool
bugs += 1
print "FOUND A FAILURE"
print sut.failure()
print "REDUCING"
failPool.append(sut.test())
collectCoverage()
R = sut.reduce(sut.test(),sut.fails, True, True)
sut.prettyPrintTest(R)
print sut.failure()
sut.restart()
return
开发者ID:Cianna，项目名称:cs569sp16，代码行数:13，代码来源:tester1.py
示例14: captureFault
def captureFault():
'Print failure state and reduction, save to file'
global nbugs
nbugs += 1
print "FAILURE LOCATED:"
print sut.failure()
print "REDUCING FAILURE:"
R = sut.reduce(sut.test(),sut.fails, True, True)
sut.prettyPrintTest(R)
print sut.failure()
# output to file for each fault
filename = 'failure%d.test' % nbugs
sut.saveTest(R, filename)
开发者ID:agroce，项目名称:cs569sp16，代码行数:13，代码来源:finaltester.py
示例15: captureFault
def captureFault():
'Print failure state and reduction'
print "FAILURE LOCATED:"
print sut.failure()
print "REDUCING FAILURE:"
R = sut.reduce(sut.test(),sut.fails, True, True)
sut.prettyPrintTest(R)
print sut.failure()
# output to file for each fault
fname = 'failure%d.test' % nbugs
fo = open(fname, "wb")
fo.write(sut.failure())
fo.close()
开发者ID:agroce，项目名称:cs569sp16，代码行数:13，代码来源:tester1.py
示例16: fault_collection
def fault_collection():
if(FAULT_CHECK):
print "use"+str(time.time()-startAll)
print "FOUND A FAILURE"
print sut.failure()
print "REDUCING"
R = sut.reduce(sut.test(),sut.fails, True, True)
sut.prettyPrintTest(R)
print "this is fault:"+ str(sut.failure())
fname = 'failure'+str(bugs)+'.test'
sut.saveTest(R,fname)
开发者ID:agroce，项目名称:cs569sp16，代码行数:14，代码来源:finaltester.py
示例17: notOK
def notOK():
global bugs, sut
bugs += 1
print "FOUND A FAILURE"
print sut.failure()
print "REDUCING"
R = sut.reduce(sut.test(), sut.fails, True, True)
sut.prettyPrintTest(R)
print sut.failure()
# save test
name = "failure" + str(bugs) + ".test"
f = sut.test()
sut.saveTest(f, name)
开发者ID:agroce，项目名称:cs569sp16，代码行数:14，代码来源:tester2.py
示例18: main
def main():
global start,BUDGET,sut,COVERAGE_REPORT,savedcoverage,rgen,storedTest,act,ok,savedcoverage,running,savedcoverage,Num,faults,foundbug,savedTestState
while time.time()-start < BUDGET:
sut.restart()
if (savedcoverage != None) and (rgen.random() > 0.3):
print "Processing"
sut.backtrack(savedcoverage)
storedTest = False
print "First: AVL tree"
for s in xrange(0,100):
act = sut.randomEnabled(rgen)
ok = sut.safely(act)
if running:
if sut.newBranches() != set([]):
## print "ACTION:",a[0],tryStutter
for d in sut.newBranches():
print time.time()-start,len(sut.allBranches()),"New branch",d
if len(sut.newStatements()) > 0:
savedcoverage = sut.state()
storedTest = True
if(running):
print "New Statement",sut.newStatements()
if (not storedTest) and (i != None) and (i in sut.currStatements()):
savedcoverage = sut.state()
storedTest = True
Num += 1
if(faults):
if not ok:
foundbug += 1
print "Failed"
print sut.failure()
print "REDUCE"
R = sut.reduce(sut.test(),sut.fails, True, True)
sut.prettyPrintTest(R)
print sut.failure()
filename = 'failure%d.test'%bugs_found
sut.saveTest(R,filename)
break
savedTestState = sut.state()
expandNewState()
if coverage:
sut.internalReport()
print foundbug,"FAILED"
print "ACTIVE",Num
print "RUNTIME",time.time()-start
开发者ID:agroce，项目名称:cs569sp16，代码行数:50，代码来源:tester2.py
示例19: Find_bugs
def Find_bugs(a):
#print "aaaaa"
global coverage_counter
global bugs
safe = sut.safely(a)
if not safe:
print " find a bug: "
bugs = bugs + 1
for s in sut.currStatements():
if s not in coverage_counter:
coverage_counter[s]=0
coverage_counter[s] = coverage_counter[s] + 1
print sut.failure()
R = sut.reduce(sut.test(),sut.fails, True, True)
sut.prettyPrintTest(R)
开发者ID:Cianna，项目名称:cs569sp16，代码行数:15，代码来源:tester.py
示例20: randomAction
def randomAction():
global actCount,bugs,j,running,actCount,r
test = False
for b in xrange(0,depth):
act = sut.randomEnabled(r)
# actCount += 1
ok = sut.safely(act)
Scheck = sut.check()
if len(sut.newBranches()) > 0:
Stest = sut.state()
test = True
if (not test) and (LCov != None) and (LCov in sut.currBranches()):
Stest = sut.start()
test = True
actCount += 1
if running == 1:
if sut.newBranches() != set([]):
print "ACTIONS:", act[0]
for b in sut.newBranches():
print time.time()-start,len(sut.allBranches()),"New branch",b
if faults == 1:
if not ok:
print "FOUND A FAILURE"
j += 1
bugs += 1
fault = sut.failure()
failurename = 'failure' + str(bugs) + '.test'
sut.saveTest(sut.test(), failurename)
print"the bugs is ",j
sut.restart()
开发者ID:agroce，项目名称:cs569sp16，代码行数:34，代码来源:tester2.py
注：本文中的sut.failure函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论