本文整理汇总了Python中utils.alloc_fail函数的典型用法代码示例。如果您正苦于以下问题：Python alloc_fail函数的具体用法？Python alloc_fail怎么用？Python alloc_fail使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了alloc_fail函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Python代码示例。
示例1: test_ap_ft_oom
def test_ap_ft_oom(dev, apdev):
"""WPA2-PSK-FT and OOM"""
skip_with_fips(dev[0])
ssid = "test-ft"
passphrase="12345678"
params = ft_params1(ssid=ssid, passphrase=passphrase)
hapd0 = hostapd.add_ap(apdev[0]['ifname'], params)
params = ft_params2(ssid=ssid, passphrase=passphrase)
hapd1 = hostapd.add_ap(apdev[1]['ifname'], params)
dev[0].connect(ssid, psk=passphrase, key_mgmt="FT-PSK", proto="WPA2",
scan_freq="2412")
if dev[0].get_status_field('bssid') == apdev[0]['bssid']:
dst = apdev[1]['bssid']
else:
dst = apdev[0]['bssid']
dev[0].scan_for_bss(dst, freq="2412")
with alloc_fail(dev[0], 1, "wpa_ft_gen_req_ies"):
dev[0].roam(dst)
with alloc_fail(dev[0], 1, "wpa_ft_mic"):
dev[0].roam(dst, fail_test=True)
with fail_test(dev[0], 1, "os_get_random;wpa_ft_prepare_auth_request"):
dev[0].roam(dst, fail_test=True)
开发者ID:msolters，项目名称:rpi-softap，代码行数:25，代码来源:test_ap_ft.py
示例2: test_wpas_ap_oom
def test_wpas_ap_oom(dev):
"""wpa_supplicant AP mode - OOM"""
id = dev[0].add_network()
dev[0].set_network(id, "mode", "2")
dev[0].set_network_quoted(id, "ssid", "wpas-ap")
dev[0].set_network_quoted(id, "psk", "1234567890")
dev[0].set_network(id, "frequency", "2412")
dev[0].set_network(id, "scan_freq", "2412")
with alloc_fail(dev[0], 1, "=wpa_supplicant_conf_ap"):
dev[0].select_network(id)
dev[0].wait_disconnected()
dev[0].request("REMOVE_NETWORK all")
id = dev[0].add_network()
dev[0].set_network(id, "mode", "2")
dev[0].set_network_quoted(id, "ssid", "wpas-ap")
dev[0].set_network(id, "psk", "1234567890abcdef1234567890abcdef1234567890abcdef1234567890abcdef")
dev[0].set_network(id, "frequency", "2412")
dev[0].set_network(id, "scan_freq", "2412")
with alloc_fail(dev[0], 1, "=wpa_supplicant_conf_ap"):
dev[0].select_network(id)
dev[0].wait_disconnected()
dev[0].request("REMOVE_NETWORK all")
id = dev[0].add_network()
dev[0].set_network(id, "mode", "2")
dev[0].set_network_quoted(id, "ssid", "wpas-ap")
dev[0].set_network(id, "key_mgmt", "NONE")
dev[0].set_network_quoted(id, "wep_key0", "hello")
dev[0].set_network(id, "frequency", "2412")
dev[0].set_network(id, "scan_freq", "2412")
with alloc_fail(dev[0], 1, "=wpa_supplicant_conf_ap"):
dev[0].select_network(id)
dev[0].wait_disconnected()
dev[0].request("REMOVE_NETWORK all")
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
wpas.interface_add("wlan5")
wpas.request("SET manufacturer test")
wpas.request("SET model_name test")
wpas.request("SET model_number test")
wpas.request("SET serial_number test")
wpas.request("SET serial_number test")
wpas.request("SET serial_number test")
wpas.request("SET ap_vendor_elements dd0411223301")
id = wpas.add_network()
wpas.set_network(id, "mode", "2")
wpas.set_network_quoted(id, "ssid", "wpas-ap")
wpas.set_network(id, "key_mgmt", "NONE")
wpas.set_network(id, "frequency", "2412")
wpas.set_network(id, "scan_freq", "2412")
for i in range(5):
with alloc_fail(wpas, i, "=wpa_supplicant_conf_ap"):
wpas.select_network(id)
ev = dev[0].wait_event([ "CTRL-EVENT-CONNECTED",
"CTRL-EVENT-DISCONNECTED" ], timeout=1)
wpas.request("DISCONNECT")
wpas.wait_disconnected()
开发者ID:cococorp，项目名称:hostap-upstream，代码行数:59，代码来源:test_wpas_ap.py
示例3: test_hapd_ctrl_ext_io_errors
def test_hapd_ctrl_ext_io_errors(dev, apdev):
"""hostapd and external I/O errors"""
ssid = "hapd-ctrl"
params = {"ssid": ssid}
hapd = hostapd.add_ap(apdev[0], params)
tests = ["MGMT_TX 1",
"MGMT_TX 1q",
"MGMT_RX_PROCESS freq=2412",
"EAPOL_RX foo",
"EAPOL_RX 00:11:22:33:44:55 1",
"EAPOL_RX 00:11:22:33:44:55 1q"]
for t in tests:
if "FAIL" not in hapd.request(t):
raise Exception("Invalid command accepted: " + t)
with alloc_fail(hapd, 1, "=hostapd_ctrl_iface_mgmt_tx"):
if "FAIL" not in hapd.request("MGMT_TX 12"):
raise Exception("MGMT_TX accepted during OOM")
with alloc_fail(hapd, 1, "=hostapd_ctrl_iface_eapol_rx"):
if "FAIL" not in hapd.request("EAPOL_RX 00:11:22:33:44:55 11"):
raise Exception("EAPOL_RX accepted during OOM")
hapd.set("ext_mgmt_frame_handling", "1")
tests = ["MGMT_RX_PROCESS freq=2412",
"MGMT_RX_PROCESS freq=2412 ssi_signal=0",
"MGMT_RX_PROCESS freq=2412 frame=1",
"MGMT_RX_PROCESS freq=2412 frame=1q"]
for t in tests:
if "FAIL" not in hapd.request(t):
raise Exception("Invalid command accepted: " + t)
with alloc_fail(hapd, 1, "=hostapd_ctrl_iface_mgmt_rx_process"):
if "FAIL" not in hapd.request("MGMT_RX_PROCESS freq=2412 frame=11"):
raise Exception("MGMT_RX_PROCESS accepted during OOM")
hapd.set("ext_mgmt_frame_handling", "0")
if "OK" not in hapd.request("DATA_TEST_CONFIG 1"):
raise Exception("Failed to enable l2_test")
if "OK" not in hapd.request("DATA_TEST_CONFIG 1"):
raise Exception("Failed to enable l2_test(2)")
tests = ["DATA_TEST_TX foo",
"DATA_TEST_TX 00:11:22:33:44:55 foo",
"DATA_TEST_TX 00:11:22:33:44:55 00:11:22:33:44:55 -1",
"DATA_TEST_TX 00:11:22:33:44:55 00:11:22:33:44:55 256"]
for t in tests:
if "FAIL" not in hapd.request(t):
raise Exception("Invalid command accepted: " + t)
if "OK" not in hapd.request("DATA_TEST_CONFIG 0"):
raise Exception("Failed to disable l2_test")
tests = ["DATA_TEST_TX 00:11:22:33:44:55 00:11:22:33:44:55 0",
"DATA_TEST_FRAME ifname=foo",
"DATA_TEST_FRAME 1",
"DATA_TEST_FRAME 11",
"DATA_TEST_FRAME 112233445566778899aabbccddeefq"]
for t in tests:
if "FAIL" not in hapd.request(t):
raise Exception("Invalid command accepted: " + t)
with alloc_fail(hapd, 1, "=hostapd_ctrl_iface_data_test_frame"):
if "FAIL" not in hapd.request("DATA_TEST_FRAME 112233445566778899aabbccddeeff"):
raise Exception("DATA_TEST_FRAME accepted during OOM")
开发者ID:greearb，项目名称:hostap-ct，代码行数:58，代码来源:test_hapd_ctrl.py
示例4: test_erp_home_realm_oom
def test_erp_home_realm_oom(dev, apdev):
"""ERP and home realm OOM"""
check_erp_capa(dev[0])
params = int_eap_server_params()
params['erp_send_reauth_start'] = '1'
params['erp_domain'] = 'example.com'
params['eap_server_erp'] = '1'
params['disable_pmksa_caching'] = '1'
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
for count in range(1, 3):
with alloc_fail(dev[0], count, "eap_home_realm"):
dev[0].request("ERP_FLUSH")
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="[email protected]",
anonymous_identity="[email protected]",
password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=PAP",
erp="1", scan_freq="2412", wait_connect=False)
dev[0].wait_connected(timeout=10)
wait_fail_trigger(dev[0], "GET_ALLOC_FAIL")
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
for count in range(1, 3):
with alloc_fail(dev[0], count, "eap_home_realm"):
dev[0].request("ERP_FLUSH")
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="erp-ttls",
anonymous_identity="[email protected]",
password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=PAP",
erp="1", scan_freq="2412", wait_connect=False)
dev[0].wait_connected(timeout=10)
wait_fail_trigger(dev[0], "GET_ALLOC_FAIL")
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
for count in range(1, 3):
dev[0].request("ERP_FLUSH")
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
identity="[email protected]",
anonymous_identity="[email protected]",
password="password",
ca_cert="auth_serv/ca.pem", phase2="auth=PAP",
erp="1", scan_freq="2412", wait_connect=False)
dev[0].wait_connected(timeout=10)
if range > 1:
continue
with alloc_fail(dev[0], count, "eap_home_realm"):
dev[0].request("DISCONNECT")
dev[0].wait_disconnected(timeout=15)
dev[0].request("RECONNECT")
wait_fail_trigger(dev[0], "GET_ALLOC_FAIL")
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
开发者ID:islipfd19，项目名称:hostap，代码行数:56，代码来源:test_erp.py
示例5: test_rsn_preauth_local_errors
def test_rsn_preauth_local_errors(dev, apdev):
"""RSN pre-authentication and local errors on AP"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
params['rsn_preauth'] = '1'
params['rsn_preauth_interfaces'] = "lo"
hapd = hostapd.add_ap(apdev[0], params)
bssid = hapd.own_addr()
_bssid = binascii.unhexlify(bssid.replace(':', ''))
sock = socket.socket(socket.AF_PACKET, socket.SOCK_RAW,
socket.htons(0x88c7))
sock.bind(("lo", socket.htons(0x88c7)))
foreign = b"\x02\x03\x04\x05\x06\x07"
foreign2 = b"\x02\x03\x04\x05\x06\x08"
proto = b"\x88\xc7"
with alloc_fail(hapd, 1, "ap_sta_add;rsn_preauth_receive"):
sock.send(_bssid + foreign + proto + struct.pack('>BBH', 2, 1, 0))
wait_fail_trigger(hapd, "GET_ALLOC_FAIL")
with alloc_fail(hapd, 1, "eapol_auth_alloc;rsn_preauth_receive"):
sock.send(_bssid + foreign + proto + struct.pack('>BBH', 2, 1, 0))
wait_fail_trigger(hapd, "GET_ALLOC_FAIL")
sock.send(_bssid + foreign + proto + struct.pack('>BBH', 2, 1, 0))
with alloc_fail(hapd, 1, "eap_server_sm_init;ieee802_1x_new_station;rsn_preauth_receive"):
sock.send(_bssid + foreign2 + proto + struct.pack('>BBH', 2, 1, 0))
wait_fail_trigger(hapd, "GET_ALLOC_FAIL")
sock.send(_bssid + foreign2 + proto + struct.pack('>BBH', 2, 1, 0))
hapd.request("DISABLE")
tests = [(1, "=rsn_preauth_iface_add"),
(2, "=rsn_preauth_iface_add"),
(1, "l2_packet_init;rsn_preauth_iface_add"),
(1, "rsn_preauth_iface_init"),
(1, "rsn_preauth_iface_init")]
for count, func in tests:
with alloc_fail(hapd, count, func):
if "FAIL" not in hapd.request("ENABLE"):
raise Exception("ENABLE succeeded unexpectedly")
hapd.set("rsn_preauth_interfaces", "lo lo lo does-not-exist lo ")
if "FAIL" not in hapd.request("ENABLE"):
raise Exception("ENABLE succeeded unexpectedly")
hapd.set("rsn_preauth_interfaces", " lo lo ")
if "OK" not in hapd.request("ENABLE"):
raise Exception("ENABLE failed")
sock.send(_bssid + foreign + proto + struct.pack('>BBH', 2, 1, 0))
sock.send(_bssid + foreign2 + proto + struct.pack('>BBH', 2, 1, 0))
开发者ID:greearb，项目名称:hostap-ct，代码行数:50，代码来源:test_pmksa_cache.py
示例6: test_gas_anqp_oom_hapd
def test_gas_anqp_oom_hapd(dev, apdev):
"""GAS/ANQP query and OOM in hostapd"""
hapd = start_ap(apdev[0])
bssid = apdev[0]['bssid']
dev[0].scan_for_bss(bssid, freq="2412", force_scan=True)
with alloc_fail(hapd, 1, "gas_build_resp"):
# This query will time out due to the AP not sending a response (OOM).
if "OK" not in dev[0].request("ANQP_GET " + bssid + " 258"):
raise Exception("ANQP_GET command failed")
ev = dev[0].wait_event(["GAS-QUERY-START"], timeout=5)
if ev is None:
raise Exception("GAS query start timed out")
ev = dev[0].wait_event(["GAS-QUERY-DONE"], timeout=10)
if ev is None:
raise Exception("GAS query timed out")
if "result=TIMEOUT" not in ev:
raise Exception("Unexpected result: " + ev)
ev = dev[0].wait_event(["ANQP-QUERY-DONE"], timeout=10)
if ev is None:
raise Exception("ANQP-QUERY-DONE event not seen")
if "result=FAILURE" not in ev:
raise Exception("Unexpected result: " + ev)
with alloc_fail(hapd, 1, "gas_anqp_build_comeback_resp"):
hapd.set("gas_frag_limit", "50")
# The first attempt of this query will time out due to the AP not
# sending a response (OOM), but the retry succeeds.
dev[0].request("FETCH_ANQP")
ev = dev[0].wait_event(["GAS-QUERY-START"], timeout=5)
if ev is None:
raise Exception("GAS query start timed out")
ev = dev[0].wait_event(["GAS-QUERY-DONE"], timeout=10)
if ev is None:
raise Exception("GAS query timed out")
if "result=SUCCESS" not in ev:
raise Exception("Unexpected result: " + ev)
ev = dev[0].wait_event(["ANQP-QUERY-DONE"], timeout=10)
if ev is None:
raise Exception("ANQP-QUERY-DONE event not seen")
if "result=SUCCESS" not in ev:
raise Exception("Unexpected result: " + ev)
开发者ID:AstroProfundis，项目名称:hostap，代码行数:49，代码来源:test_gas.py
示例7: test_nfc_wps_handover_errors
def test_nfc_wps_handover_errors(dev, apdev):
"""WPS AP NFC handover report error cases"""
ssid = "test-wps-nfc-handover"
hapd = hostapd.add_ap(apdev[0],
{ "ssid": ssid, "eap_server": "1", "wps_state": "1" })
sel = hapd.request("NFC_GET_HANDOVER_SEL NDEF WPS-CR").rstrip()
if "FAIL" in sel:
raise Exception("Failed to generate NFC connection handover select")
if "FAIL" not in hapd.request("NFC_REPORT_HANDOVER "):
raise Exception("Unexpected handover report success")
if "FAIL" not in hapd.request("NFC_REPORT_HANDOVER RESP"):
raise Exception("Unexpected handover report success")
if "FAIL" not in hapd.request("NFC_REPORT_HANDOVER RESP WPS"):
raise Exception("Unexpected handover report success")
if "FAIL" not in hapd.request("NFC_REPORT_HANDOVER RESP WPS 001122"):
raise Exception("Unexpected handover report success")
if "FAIL" not in hapd.request("NFC_REPORT_HANDOVER RESP WPS 001122 00"):
raise Exception("Unexpected handover report success")
if "FAIL" not in hapd.request("NFC_REPORT_HANDOVER RESP WPS 0 00"):
raise Exception("Unexpected handover report success")
if "FAIL" not in hapd.request("NFC_REPORT_HANDOVER RESP WPS 001122 0"):
raise Exception("Unexpected handover report success")
if "FAIL" not in hapd.request("NFC_REPORT_HANDOVER RESP WPS 00q122 001122"):
raise Exception("Unexpected handover report success")
if "FAIL" not in hapd.request("NFC_REPORT_HANDOVER RESP WPS 001122 001q22"):
raise Exception("Unexpected handover report success")
if "FAIL" not in hapd.request("NFC_REPORT_HANDOVER RESP FOO 001122 00"):
raise Exception("Unexpected handover report success")
for i in range(1, 3):
with alloc_fail(hapd, i,
"wpabuf_alloc;hostapd_ctrl_iface_nfc_report_handover"):
if "FAIL" not in hapd.request("NFC_REPORT_HANDOVER RESP WPS 001122 001122"):
raise Exception("NFC_REPORT_HANDOVER RESP succeeded during OOM")
开发者ID:gxk，项目名称:hostap，代码行数:33，代码来源:test_nfc_wps.py
示例8: test_ap_qosmap_invalid
def test_ap_qosmap_invalid(dev, apdev):
"""QoS mapping ctrl_iface error handling"""
ssid = "test-qosmap"
params = { "ssid": ssid }
hapd = hostapd.add_ap(apdev[0], params)
if "FAIL" not in hapd.request("SEND_QOS_MAP_CONF 00:11:22:33:44:55"):
raise Exception("Unexpected SEND_QOS_MAP_CONF success")
if "FAIL" not in hapd.request("SET_QOS_MAP_SET "):
raise Exception("Unexpected SET_QOS_MAP_SET success")
if "FAIL" not in hapd.request("SET_QOS_MAP_SET 1,2,3"):
raise Exception("Unexpected SET_QOS_MAP_SET success")
if "FAIL" not in hapd.request("SET_QOS_MAP_SET 1,-2,3"):
raise Exception("Unexpected SET_QOS_MAP_SET success")
if "FAIL" not in hapd.request("SET_QOS_MAP_SET 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59"):
raise Exception("Unexpected SET_QOS_MAP_SET success")
if "FAIL" not in hapd.request("SET_QOS_MAP_SET 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21"):
raise Exception("Unexpected SET_QOS_MAP_SET success")
if "FAIL" in hapd.request("SET_QOS_MAP_SET 22,6,8,15,0,7,255,255,16,31,32,39,255,255,40,47,48,55"):
raise Exception("Unexpected SET_QOS_MAP_SET failure")
if "FAIL" not in hapd.request("SEND_QOS_MAP_CONF 00:11:22:33:44:55"):
raise Exception("Unexpected SEND_QOS_MAP_CONF success")
if "FAIL" not in hapd.request("SEND_QOS_MAP_CONF 00:11:22:33:44"):
raise Exception("Unexpected SEND_QOS_MAP_CONF success")
with fail_test(hapd, 1, "hostapd_ctrl_iface_set_qos_map_set"):
if "FAIL" not in hapd.request("SET_QOS_MAP_SET 22,6,8,15,0,7,255,255,16,31,32,39,255,255,40,47,48,55"):
raise Exception("SET_QOS_MAP_SET accepted during forced driver failure")
dev[0].connect(ssid, key_mgmt="NONE", scan_freq="2412")
with alloc_fail(hapd, 1,
"wpabuf_alloc;hostapd_ctrl_iface_send_qos_map_conf"):
if "FAIL" not in hapd.request("SEND_QOS_MAP_CONF " + dev[0].own_addr()):
raise Exception("SEND_QOS_MAP_CONF accepted during OOM")
开发者ID:gxk，项目名称:hostap，代码行数:34，代码来源:test_ap_qosmap.py
示例9: _test_nfc_wps_handover_init
def _test_nfc_wps_handover_init(dev, apdev):
dev[0].request("SET ignore_old_scan_res 1")
ssid = "test-wps-nfc-handover-init"
hapd = hostapd.add_ap(apdev[0],
{ "ssid": ssid, "eap_server": "1", "wps_state": "1" })
logger.info("NFC connection handover")
req = dev[0].request("NFC_GET_HANDOVER_REQ NDEF WPS-CR").rstrip()
if "FAIL" in req:
raise Exception("Failed to generate NFC connection handover request")
sel = hapd.request("NFC_GET_HANDOVER_SEL NDEF WPS-CR").rstrip()
if "FAIL" in sel:
raise Exception("Failed to generate NFC connection handover select")
res = hapd.request("NFC_REPORT_HANDOVER RESP WPS " + req + " " + sel)
if "FAIL" in res:
raise Exception("Failed to report NFC connection handover to to hostapd")
dev[0].dump_monitor()
res = dev[0].request("NFC_REPORT_HANDOVER INIT WPS " + req + " " + sel)
if "FAIL" in res:
raise Exception("Failed to report NFC connection handover to to wpa_supplicant")
dev[0].wait_connected(timeout=15)
check_wpa2_connection(dev[0], apdev[0], hapd, ssid, mixed=True)
with alloc_fail(hapd, 1, "wps_build_nfc_handover_sel"):
if "FAIL" not in hapd.request("NFC_GET_HANDOVER_SEL NDEF WPS-CR"):
raise Exception("Unexpected NFC_GET_HANDOVER_SEL success during OOM")
开发者ID:AstroProfundis，项目名称:hostap，代码行数:25，代码来源:test_nfc_wps.py
示例10: test_tnc_peap_soh_errors
def test_tnc_peap_soh_errors(dev, apdev):
"""TNC PEAP-SoH local error cases"""
params = int_eap_server_params()
params["tnc"] = "1"
hostapd.add_ap(apdev[0], params)
tests = [ (1, "tncc_build_soh"),
(1, "eap_msg_alloc;=eap_peap_phase2_request") ]
for count, func in tests:
with alloc_fail(dev[0], count, func):
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP",
eap="PEAP", identity="user", password="password",
ca_cert="auth_serv/ca.pem",
phase1="peapver=0 tnc=soh cryptobinding=0",
phase2="auth=MSCHAPV2",
scan_freq="2412", wait_connect=False)
wait_fail_trigger(dev[0], "GET_ALLOC_FAIL")
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
with fail_test(dev[0], 1, "os_get_random;tncc_build_soh"):
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP",
eap="PEAP", identity="user", password="password",
ca_cert="auth_serv/ca.pem",
phase1="peapver=0 tnc=soh cryptobinding=0",
phase2="auth=MSCHAPV2",
scan_freq="2412", wait_connect=False)
wait_fail_trigger(dev[0], "GET_FAIL")
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
开发者ID:9A9A，项目名称:wpa_supplicant-fork，代码行数:30，代码来源:test_tnc.py
示例11: test_ap_acs_errors
def test_ap_acs_errors(dev, apdev):
"""Automatic channel selection failures"""
clear_scan_cache(apdev[0])
force_prev_ap_on_24g(apdev[0])
params = hostapd.wpa2_params(ssid="test-acs", passphrase="12345678")
params['channel'] = '0'
params['acs_num_scans'] = '2'
params['chanlist'] = '1'
hapd = hostapd.add_ap(apdev[0], params, no_enable=True)
with alloc_fail(hapd, 1, "acs_request_scan"):
if "FAIL" not in hapd.request("ENABLE"):
raise Exception("Unexpected success for ENABLE")
hapd.dump_monitor()
with fail_test(hapd, 1, "acs_request_scan"):
if "FAIL" not in hapd.request("ENABLE"):
raise Exception("Unexpected success for ENABLE")
hapd.dump_monitor()
with fail_test(hapd, 1, "acs_scan_complete"):
hapd.enable()
ev = hapd.wait_event(["AP-ENABLED", "AP-DISABLED"], timeout=10)
if not ev:
raise Exception("ACS start timed out")
hapd.dump_monitor()
with fail_test(hapd, 1, "acs_request_scan;acs_scan_complete"):
hapd.enable()
ev = hapd.wait_event(["AP-ENABLED", "AP-DISABLED"], timeout=10)
if not ev:
raise Exception("ACS start timed out")
开发者ID:gxk，项目名称:hostap，代码行数:32，代码来源:test_ap_acs.py
示例12: test_nfc_wps_password_token_sta
def test_nfc_wps_password_token_sta(dev, apdev):
"""NFC tag with password token on the station/Enrollee"""
ssid = "test-wps-nfc-pw-token-conf"
params = ap_wps_params(ssid)
hapd = hostapd.add_ap(apdev[0], params)
logger.info("WPS provisioning step using password token from station")
wps = dev[0].request("WPS_NFC_TOKEN WPS").rstrip()
if "FAIL" in wps:
raise Exception("Failed to generate password token (WPS only)")
pw = dev[0].request("WPS_NFC_TOKEN NDEF").rstrip()
if "FAIL" in pw:
raise Exception("Failed to generate password token")
res = hapd.request("WPS_NFC_TAG_READ " + pw)
if "FAIL" in res:
raise Exception("Failed to provide NFC tag contents to hostapd")
dev[0].dump_monitor()
res = dev[0].request("WPS_NFC")
if "FAIL" in res:
raise Exception("Failed to start Enrollee using NFC password token")
dev[0].wait_connected(timeout=30)
check_wpa2_connection(dev[0], apdev[0], hapd, ssid)
if "FAIL" not in hapd.request("WPS_NFC_TAG_READ 0"):
raise Exception("Invalid WPS_NFC_TAG_READ accepted")
if "FAIL" not in hapd.request("WPS_NFC_TAG_READ 0q"):
raise Exception("Invalid WPS_NFC_TAG_READ accepted")
with alloc_fail(hapd, 1,
"wpabuf_alloc;hostapd_ctrl_iface_wps_nfc_tag_read"):
if "FAIL" not in hapd.request("WPS_NFC_TAG_READ 00"):
raise Exception("WPS_NFC_TAG_READ accepted during OOM")
开发者ID:gxk，项目名称:hostap，代码行数:30，代码来源:test_nfc_wps.py
示例13: test_nfc_wps_config_token
def test_nfc_wps_config_token(dev, apdev):
"""NFC tag with configuration token from AP"""
ssid = "test-wps-nfc-conf-token"
params = ap_wps_params(ssid)
hapd = hostapd.add_ap(apdev[0], params)
logger.info("NFC configuration token from AP to station")
conf = hapd.request("WPS_NFC_CONFIG_TOKEN NDEF").rstrip()
if "FAIL" in conf:
raise Exception("Failed to generate configuration token")
ndef_conf = conf
dev[0].dump_monitor()
res = dev[0].request("WPS_NFC_TAG_READ " + conf)
if "FAIL" in res:
raise Exception("Failed to provide NFC tag contents to wpa_supplicant")
dev[0].wait_connected(timeout=15)
check_wpa2_connection(dev[0], apdev[0], hapd, ssid)
with alloc_fail(hapd, 1, "wps_get_oob_cred"):
conf = hapd.request("WPS_NFC_CONFIG_TOKEN NDEF").rstrip()
if "FAIL" not in conf:
raise Exception("Unexpected configuration token received during OOM")
wps_conf = hapd.request("WPS_NFC_CONFIG_TOKEN WPS").rstrip()
if "FAIL" in wps_conf:
raise Exception("Failed to generate configuration token (WPS)")
if wps_conf not in ndef_conf:
raise Exception("WPS config token not within NDEF encapsulated one")
conf = hapd.request("WPS_NFC_CONFIG_TOKEN FOO").rstrip()
if "FAIL" not in conf:
raise Exception("Invalid WPS_NFC_CONFIG_TOKEN accepted")
开发者ID:gxk，项目名称:hostap，代码行数:31，代码来源:test_nfc_wps.py
示例14: test_bgscan_learn_oom
def test_bgscan_learn_oom(dev, apdev):
"""bgscan_learn OOM"""
hapd = hostapd.add_ap(apdev[0], {"ssid": "bgscan"})
with alloc_fail(dev[0], 1, "bgscan_learn_init"):
dev[0].connect("bgscan", key_mgmt="NONE", scan_freq="2412",
bgscan="learn:1:-20:2")
开发者ID:greearb，项目名称:hostap-ct，代码行数:7，代码来源:test_bgscan.py
示例15: test_ibss_rsn_oom
def test_ibss_rsn_oom(dev):
"""IBSS RSN OOM during wpa_init"""
with alloc_fail(dev[0], 1, "wpa_init"):
ssid="ibss-rsn"
id = add_ibss_rsn(dev[0], ssid)
connect_ibss_cmd(dev[0], id)
bssid0 = wait_ibss_connection(dev[0])
开发者ID:9A9A，项目名称:wpa_supplicant-fork，代码行数:7，代码来源:test_ibss.py
示例16: test_ibss_rsn_oom
def test_ibss_rsn_oom(dev):
"""IBSS RSN OOM during wpa_init"""
with alloc_fail(dev[0], 1, "wpa_init"):
ssid = "ibss-rsn"
id = add_ibss_rsn(dev[0], ssid, scan_freq=2412)
connect_ibss_cmd(dev[0], id)
bssid0 = wait_ibss_connection(dev[0])
dev[0].request("REMOVE_NETWORK all")
dev[0].dump_monitor()
with alloc_fail(dev[0], 1, "=ibss_rsn_init"):
ssid = "ibss-rsn"
id = add_ibss_rsn(dev[0], ssid, scan_freq=2412)
connect_ibss_cmd(dev[0], id)
bssid0 = wait_ibss_connection(dev[0])
dev[0].request("REMOVE_NETWORK all")
dev[0].dump_monitor()
开发者ID:greearb，项目名称:hostap-ct，代码行数:17，代码来源:test_ibss.py
示例17: test_tnc_ttls_errors
def test_tnc_ttls_errors(dev, apdev):
"""TNC TTLS local error cases"""
if not os.path.exists("tnc/libhostap_imc.so"):
raise HwsimSkip("No IMC installed")
check_eap_capa(dev[0], "MSCHAPV2")
params = int_eap_server_params()
params["tnc"] = "1"
params["fragment_size"] = "150"
hostapd.add_ap(apdev[0], params)
tests = [(1, "eap_ttls_process_phase2_eap;eap_ttls_process_tnc_start",
"DOMAIN\mschapv2 user", "auth=MSCHAPV2"),
(1, "eap_ttls_process_phase2_eap;eap_ttls_process_tnc_start",
"mschap user", "auth=MSCHAP"),
(1, "=eap_tnc_init", "chap user", "auth=CHAP"),
(1, "tncc_init;eap_tnc_init", "pap user", "auth=PAP"),
(1, "eap_msg_alloc;eap_tnc_build_frag_ack",
"pap user", "auth=PAP"),
(1, "eap_msg_alloc;eap_tnc_build_msg",
"pap user", "auth=PAP"),
(1, "wpabuf_alloc;=eap_tnc_process_fragment",
"pap user", "auth=PAP"),
(1, "eap_msg_alloc;=eap_tnc_process", "pap user", "auth=PAP"),
(1, "wpabuf_alloc;=eap_tnc_process", "pap user", "auth=PAP"),
(1, "dup_binstr;tncc_process_if_tnccs", "pap user", "auth=PAP"),
(1, "tncc_get_base64;tncc_process_if_tnccs",
"pap user", "auth=PAP"),
(1, "tncc_if_tnccs_start", "pap user", "auth=PAP"),
(1, "tncc_if_tnccs_end", "pap user", "auth=PAP"),
(1, "tncc_parse_imc", "pap user", "auth=PAP"),
(2, "tncc_parse_imc", "pap user", "auth=PAP"),
(3, "tncc_parse_imc", "pap user", "auth=PAP"),
(1, "os_readfile;tncc_read_config", "pap user", "auth=PAP"),
(1, "tncc_init", "pap user", "auth=PAP"),
(1, "TNC_TNCC_ReportMessageTypes", "pap user", "auth=PAP"),
(1, "base64_gen_encode;?base64_encode;TNC_TNCC_SendMessage",
"pap user", "auth=PAP"),
(1, "=TNC_TNCC_SendMessage", "pap user", "auth=PAP"),
(1, "tncc_get_base64;tncc_process_if_tnccs",
"pap user", "auth=PAP")]
for count, func, identity, phase2 in tests:
with alloc_fail(dev[0], count, func):
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP",
scan_freq="2412",
eap="TTLS", anonymous_identity="ttls",
identity=identity, password="password",
ca_cert="auth_serv/ca.pem", phase2=phase2,
fragment_size="150", wait_connect=False)
ev = dev[0].wait_event(["CTRL-EVENT-EAP-PROPOSED-METHOD"],
timeout=15)
if ev is None:
raise Exception("Timeout on EAP start")
wait_fail_trigger(dev[0], "GET_ALLOC_FAIL",
note="Allocation failure not triggered for: %d:%s" % (count, func))
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected()
dev[0].dump_monitor()
开发者ID:greearb，项目名称:hostap-ct，代码行数:58，代码来源:test_tnc.py
示例18: test_hapd_ctrl_vendor_errors
def test_hapd_ctrl_vendor_errors(dev, apdev):
"""hostapd and VENDOR errors"""
ssid = "hapd-ctrl"
params = {"ssid": ssid}
hapd = hostapd.add_ap(apdev[0], params)
tests = ["q",
"10q",
"10 10q",
"10 10 123q",
"10 10"]
for t in tests:
if "FAIL" not in hapd.request("VENDOR " + t):
raise Exception("Invalid VENDOR command accepted: " + t)
with alloc_fail(hapd, 1, "=hostapd_ctrl_iface_vendor"):
if "FAIL" not in hapd.request("VENDOR 10 10 10"):
raise Exception("VENDOR accepted during OOM")
with alloc_fail(hapd, 1, "wpabuf_alloc;hostapd_ctrl_iface_vendor"):
if "FAIL" not in hapd.request("VENDOR 10 10"):
raise Exception("VENDOR accepted during OOM")
开发者ID:greearb，项目名称:hostap-ct，代码行数:19，代码来源:test_hapd_ctrl.py
示例19: test_gas_anqp_oom_wpas
def test_gas_anqp_oom_wpas(dev, apdev):
"""GAS/ANQP query and OOM in wpa_supplicant"""
hapd = start_ap(apdev[0])
bssid = apdev[0]['bssid']
dev[0].scan_for_bss(bssid, freq="2412", force_scan=True)
with alloc_fail(dev[0], 1, "gas_build_req"):
if "FAIL" not in dev[0].request("ANQP_GET " + bssid + " 258"):
raise Exception("Unexpected ANQP_GET command success (OOM)")
开发者ID:AstroProfundis，项目名称:hostap，代码行数:10，代码来源:test_gas.py
示例20: hapd_out_of_mem
def hapd_out_of_mem(hapd, apdev, count, func):
with alloc_fail(hapd, count, func):
started = False
try:
hostapd.add_ap(apdev, { "ssid": "open" })
started = True
except:
pass
if started:
raise Exception("hostapd interface started even with memory allocation failure: %d:%s" % (count, func))
开发者ID:cococorp，项目名称:hostap-upstream，代码行数:10，代码来源:test_ap_open.py
注：本文中的utils.alloc_fail函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论