Python vmtkrenderer.vmtkRenderer函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› Python›Python编程经验

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Python中vmtkrenderer.vmtkRenderer函数的典型用法代码示例。如果您正苦于以下问题：Python vmtkRenderer函数的具体用法？Python vmtkRenderer怎么用？Python vmtkRenderer使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了vmtkRenderer函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Python代码示例。

示例1: Execute

    def Execute(self):

        if self.Image == None:
            self.PrintError('Error: no Image.')

        if self.Interactive == 1:
            
            if not self.vmtkRenderer:
                self.vmtkRenderer = vmtkrenderer.vmtkRenderer()
                self.vmtkRenderer.Initialize()
                self.OwnRenderer = 1

            self.vmtkRenderer.RegisterScript(self)                 

            self.PlaneWidgetX = vtk.vtkImagePlaneWidget()
            self.PlaneWidgetX.SetInteractor(self.vmtkRenderer.RenderWindowInteractor)
            self.PlaneWidgetY = vtk.vtkImagePlaneWidget()
            self.PlaneWidgetY.SetInteractor(self.vmtkRenderer.RenderWindowInteractor)
            self.PlaneWidgetZ = vtk.vtkImagePlaneWidget()
            self.PlaneWidgetZ.SetInteractor(self.vmtkRenderer.RenderWindowInteractor)
            self.BoxWidget = vtk.vtkBoxWidget()
            self.BoxWidget.SetInteractor(self.vmtkRenderer.RenderWindowInteractor)
            self.vmtkRenderer.AddKeyBinding('i','Interact.', self.InteractCallback)

            self.Display()
            while (self.BoxActive == 1):
                self.PaintVOI()
                self.Display()
        else:
            self.PaintVOI()

        if self.OwnRenderer:
            self.vmtkRenderer.Deallocate()

开发者ID:SaraZanchi，项目名称:vmtk，代码行数:33，代码来源:vmtkimagevoipainter.py

示例2: Execute

    def Execute(self):

        if self.Image == None:
            self.PrintError('Error: no Image.')

        self.CroppedImage.DeepCopy(self.Image)

        if self.Interactive == 1:
            
            if not self.vmtkRenderer:
                self.vmtkRenderer = vmtkrenderer.vmtkRenderer()
                self.vmtkRenderer.Initialize()
                self.OwnRenderer = 1
                
            self.PlaneWidgetX = vtk.vtkImagePlaneWidget()
            self.PlaneWidgetX.SetInteractor(self.vmtkRenderer.RenderWindowInteractor)
            self.PlaneWidgetY = vtk.vtkImagePlaneWidget()
            self.PlaneWidgetY.SetInteractor(self.vmtkRenderer.RenderWindowInteractor)
            self.PlaneWidgetZ = vtk.vtkImagePlaneWidget()
            self.PlaneWidgetZ.SetInteractor(self.vmtkRenderer.RenderWindowInteractor)
            self.BoxWidget = vtk.vtkBoxWidget()
            self.BoxWidget.SetInteractor(self.vmtkRenderer.RenderWindowInteractor)

            self.Display()
            while (self.BoxActive == 1):
                self.ExtractVOI()
                self.Image = self.CroppedImage
                self.Display()
        else:
            self.ExtractVOI()

        if self.OwnRenderer:
            self.vmtkRenderer.Deallocate()

        self.Image = self.CroppedImage

开发者ID:ValentinaRossi，项目名称:vmtk，代码行数:35，代码来源:vmtkimagevoiselector.py

示例3: Execute

    def Execute(self):

        if self.Image == None:
            self.PrintError("Error: no Image.")

        if not self.vmtkRenderer:
            self.vmtkRenderer = vmtkrenderer.vmtkRenderer()
            self.vmtkRenderer.Initialize()
            self.OwnRenderer = 1

        self.vmtkRenderer.RegisterScript(self)

        if self.Type == "freehand":
            self.ImageTracerWidget = vtk.vtkImageTracerWidget()
        elif self.Type == "contour":
            self.ImageTracerWidget = vtk.vtkContourWidget()
        self.ImageTracerWidget.SetInteractor(self.vmtkRenderer.RenderWindowInteractor)

        self.SliderWidget = vtk.vtkSliderWidget()
        self.SliderWidget.SetInteractor(self.vmtkRenderer.RenderWindowInteractor)

        self.ImageActor = vtk.vtkImageActor()

        self.vmtkRenderer.AddKeyBinding("n", "Next.", self.NextCallback)
        self.vmtkRenderer.AddKeyBinding("p", "Previous.", self.PreviousCallback)
        self.vmtkRenderer.AddKeyBinding("i", "Interact.", self.InteractCallback)

        self.Display()

        if self.OwnRenderer:
            self.vmtkRenderer.Deallocate()

开发者ID:tangui，项目名称:vmtk，代码行数:31，代码来源:vmtkimagelinetracer.py

示例4: Execute

    def Execute(self):

        if self.Image == None:
            self.PrintError('Error: no Image.')

        if not self.vmtkRenderer:
            self.vmtkRenderer = vmtkrenderer.vmtkRenderer()
            self.vmtkRenderer.Initialize()
            self.OwnRenderer = 1

        if self.Type == 'freehand':
            self.ImageTracerWidget = vtk.vtkImageTracerWidget()
        elif self.Type == 'contour':
            self.ImageTracerWidget = vtk.vtkContourWidget()
        self.ImageTracerWidget.SetInteractor(self.vmtkRenderer.RenderWindowInteractor)

        self.SliderWidget = vtk.vtkSliderWidget()
        self.SliderWidget.SetInteractor(self.vmtkRenderer.RenderWindowInteractor)

        self.ImageActor = vtk.vtkImageActor()

        self.vmtkRenderer.RenderWindowInteractor.AddObserver("KeyPressEvent", self.Keypress)

        self.Display()

        if self.OwnRenderer:
            self.vmtkRenderer.Deallocate()

开发者ID:ValentinaRossi，项目名称:vmtk，代码行数:27，代码来源:vmtkimagelinetracer.py

示例5: Execute

    def Execute(self):

        if self.Image == None:
            self.PrintError('Error: no Image.')

        if not self.vmtkRenderer:
            self.vmtkRenderer = vmtkrenderer.vmtkRenderer()
            self.vmtkRenderer.Initialize()
            self.OwnRenderer = 1

        self.vmtkRenderer.RegisterScript(self) 

        if self.Type == 'freehand':
            self.ImageTracerWidget = vtk.vtkImageTracerWidget()
        elif self.Type == 'contour':
            self.ImageTracerWidget = vtk.vtkContourWidget()
        self.ImageTracerWidget.SetInteractor(self.vmtkRenderer.RenderWindowInteractor)

        self.SliderWidget = vtk.vtkSliderWidget()
        self.SliderWidget.SetInteractor(self.vmtkRenderer.RenderWindowInteractor)

        self.ImageActor = vtk.vtkImageActor()

        self.vmtkRenderer.AddKeyBinding('n','Next.',self.NextCallback)
        self.vmtkRenderer.AddKeyBinding('p','Previous.',self.PreviousCallback)
        self.vmtkRenderer.AddKeyBinding('i','Interact.', self.InteractCallback)

        self.Display()

        if self.OwnRenderer:
            self.vmtkRenderer.Deallocate()

开发者ID:ChaliZhg，项目名称:vmtk，代码行数:31，代码来源:vmtkimagelinetracer.py

示例6: Execute

    def Execute(self):

        if (self._Surface == None):
            self.PrintError('vmtkPickPointSeedSelector Error: Surface not set.')
            return

        self._SourceSeedIds.Initialize()
        self._TargetSeedIds.Initialize()

        if not self.vmtkRenderer:
            self.vmtkRenderer = vmtkrenderer.vmtkRenderer()
            self.vmtkRenderer.Initialize()
            self.OwnRenderer = 1

        glyphs = vtk.vtkGlyph3D()
        glyphSource = vtk.vtkSphereSource()
        glyphs.SetInput(self.PickedSeeds)
        glyphs.SetSource(glyphSource.GetOutput())
        glyphs.SetScaleModeToDataScalingOff()
        glyphs.SetScaleFactor(self._Surface.GetLength()*0.01)
        glyphMapper = vtk.vtkPolyDataMapper()
        glyphMapper.SetInput(glyphs.GetOutput())
        self.SeedActor = vtk.vtkActor()
        self.SeedActor.SetMapper(glyphMapper)
        self.SeedActor.GetProperty().SetColor(1.0,0.0,0.0)
        self.SeedActor.PickableOff()
        self.vmtkRenderer.Renderer.AddActor(self.SeedActor)

        self.vmtkRenderer.RenderWindowInteractor.AddObserver("KeyPressEvent", self.KeyPressed)

        surfaceMapper = vtk.vtkPolyDataMapper()
        surfaceMapper.SetInput(self._Surface)
        surfaceMapper.ScalarVisibilityOff()
        surfaceActor = vtk.vtkActor()
        surfaceActor.SetMapper(surfaceMapper)
        surfaceActor.GetProperty().SetOpacity(1.0)

        self.vmtkRenderer.Renderer.AddActor(surfaceActor)

        self.OutputText('Please position the mouse and press space to add source points, \'u\' to undo\n')

        any = 0
        while any == 0:
            self.InitializeSeeds()
            self.vmtkRenderer.Render()
            any = self.PickedSeedIds.GetNumberOfIds()
        self._SourceSeedIds.DeepCopy(self.PickedSeedIds)

        self.OutputText('Please position the mouse and press space to add target points, \'u\' to undo\n')

        any = 0
        while any == 0:
            self.InitializeSeeds()
            self.vmtkRenderer.Render()
            any = self.PickedSeedIds.GetNumberOfIds()
        self._TargetSeedIds.DeepCopy(self.PickedSeedIds)

        if self.OwnRenderer:
            self.vmtkRenderer.Deallocate()

开发者ID:ValentinaRossi，项目名称:vmtk，代码行数:59，代码来源:vmtkcenterlines.py

示例7: Execute

    def Execute(self):
 
        if not self.Centerlines:
            self.PrintError('Error: No input centerlines.')
            return
        
        if not self.vmtkRenderer:
            self.vmtkRenderer = vmtkrenderer.vmtkRenderer()
            self.vmtkRenderer.Initialize()
            self.OwnRenderer = 1

        self.vmtkRenderer.RegisterScript(self) 

        if self.CellDataArrayName:
            cellCenters = vtk.vtkCellCenters()
            cellCenters.SetInput(self.Centerlines)
            cellCenters.Update()
            cellCenters.GetOutput().GetPointData().SetActiveScalars(self.CellDataArrayName)
            labelsMapper = vtk.vtkLabeledDataMapper();
            labelsMapper.SetInput(cellCenters.GetOutput())
            labelsMapper.SetLabelModeToLabelScalars()
            labelsActor = vtk.vtkActor2D()
            labelsActor.SetMapper(labelsMapper)
            self.vmtkRenderer.Renderer.AddActor(labelsActor)

        centerlineMapper = vtk.vtkPolyDataMapper()
        centerlineMapper.SetInput(self.Centerlines)
        if self.CellDataArrayName and not self.PointDataArrayName:
            centerlineMapper.ScalarVisibilityOn()
            centerlineMapper.SetScalarModeToUseCellData()
            self.Centerlines.GetCellData().SetActiveScalars(self.CellDataArrayName)
            centerlineMapper.SetScalarRange(self.Centerlines.GetCellData().GetScalars().GetRange(0))
        elif self.PointDataArrayName:
            centerlineMapper.ScalarVisibilityOn()
            centerlineMapper.SetScalarModeToUsePointData()
            self.Centerlines.GetPointData().SetActiveScalars(self.PointDataArrayName)
            centerlineMapper.SetScalarRange(self.Centerlines.GetPointData().GetScalars().GetRange(0))
        else:
            centerlineMapper.ScalarVisibilityOff()
        centerlineActor = vtk.vtkActor()
        centerlineActor.SetMapper(centerlineMapper)
        self.vmtkRenderer.Renderer.AddActor(centerlineActor)

        scalarBarActor = None
        if self.Legend and centerlineActor and self.PointDataArrayName:
            scalarBarActor = vtk.vtkScalarBarActor()
            scalarBarActor.SetLookupTable(centerlineActor.GetMapper().GetLookupTable())
            scalarBarActor.GetLabelTextProperty().ItalicOff()
            scalarBarActor.GetLabelTextProperty().BoldOff()
            scalarBarActor.GetLabelTextProperty().ShadowOff()
            scalarBarActor.SetLabelFormat('%.2f')
            scalarBarActor.SetTitle(self.PointDataArrayName)
            self.vmtkRenderer.Renderer.AddActor(scalarBarActor)
	
	if self.Display:
            self.vmtkRenderer.Render()

        if self.OwnRenderer:
            self.vmtkRenderer.Deallocate()

开发者ID:SaraZanchi，项目名称:vmtk，代码行数:59，代码来源:vmtkcenterlineviewer.py

示例8: Execute

    def Execute(self):

        if self.Surface == None:
            self.PrintError('Error: no Surface.')

        if self.WidgetType == "box":
            self.ClipFunction = vtk.vtkPlanes()
        elif self.WidgetType == "sphere":
            self.ClipFunction = vtk.vtkSphere()

        self.Clipper = vtk.vtkClipPolyData()
        self.Clipper.SetInput(self.Surface)
        self.Clipper.SetClipFunction(self.ClipFunction)
        self.Clipper.GenerateClippedOutputOn()
        self.Clipper.InsideOutOn()
        
        if not self.vmtkRenderer:
            self.vmtkRenderer = vmtkrenderer.vmtkRenderer()
            self.vmtkRenderer.Initialize()
            self.OwnRenderer = 1

        mapper = vtk.vtkPolyDataMapper()
        mapper.SetInput(self.Surface)
        mapper.ScalarVisibilityOff()
        self.Actor = vtk.vtkActor()
        self.Actor.SetMapper(mapper)
        self.vmtkRenderer.Renderer.AddActor(self.Actor)

        if self.WidgetType == "box":
            self.ClipWidget = vtk.vtkBoxWidget()
            self.ClipWidget.GetFaceProperty().SetColor(0.6,0.6,0.2)
            self.ClipWidget.GetFaceProperty().SetOpacity(0.25)
        elif self.WidgetType == "sphere":
            self.ClipWidget = vtk.vtkSphereWidget()
            self.ClipWidget.GetSphereProperty().SetColor(0.6,0.6,0.2)
            self.ClipWidget.GetSphereProperty().SetOpacity(0.25)
            self.ClipWidget.GetSelectedSphereProperty().SetColor(0.6,0.0,0.0)
            self.ClipWidget.GetSelectedSphereProperty().SetOpacity(0.75)
            self.ClipWidget.SetRepresentationToSurface()
            self.ClipWidget.SetPhiResolution(20)
            self.ClipWidget.SetThetaResolution(20)

        self.ClipWidget.SetInteractor(self.vmtkRenderer.RenderWindowInteractor)
        self.Display()

        self.Transform = vtk.vtkTransform()
        self.ClipWidget.GetTransform(self.Transform)

        if self.OwnRenderer:
            self.vmtkRenderer.Deallocate()

        if self.CleanOutput == 1:
            cleaner = vtk.vtkCleanPolyData()
            cleaner.SetInput(self.Surface)
            cleaner.Update()
            self.Surface = cleaner.GetOutput()

        if self.Surface.GetSource():
            self.Surface.GetSource().UnRegisterAllOutputs()

开发者ID:ValentinaRossi，项目名称:vmtk，代码行数:59，代码来源:vmtksurfaceclipper.py

示例9: Execute

    def Execute(self):

        if self.Centerlines == None:
            self.PrintError('Error: No input centerlines.')

        if self.ReferenceSystems == None:
            self.PrintError('Error: No input reference systems.')

        if self.Interactive and not self.vmtkRenderer:
            self.vmtkRenderer = vmtkrenderer.vmtkRenderer()
            self.vmtkRenderer.Initialize()
            self.OwnRenderer = 1
 
        if self.Interactive:

            self.vmtkRenderer.RegisterScript(self) 

            viewer = vmtkcenterlineviewer.vmtkCenterlineViewer()
            viewer.Centerlines = self.Centerlines
            viewer.CellDataArrayName = self.GroupIdsArrayName
            viewer.vmtkRenderer = self.vmtkRenderer
            viewer.InputText = self.InputText
            viewer.OutputText = self.OutputText
            viewer.PrintError = self.PrintError
            viewer.PringLog = self.PrintLog
            viewer.Display = 0
	    viewer.Execute()
            
            groupIdString = self.InputText("Please input the reference groupId:\n",self.GroupIdValidator)
            self.ReferenceGroupId = int(groupIdString)

        offsetFilter = vtkvmtk.vtkvmtkCenterlineReferenceSystemAttributesOffset()
        offsetFilter.SetInput(self.Centerlines)
        offsetFilter.SetReferenceSystems(self.ReferenceSystems)
        offsetFilter.SetAbscissasArrayName(self.AbscissasArrayName)
        offsetFilter.SetNormalsArrayName(self.NormalsArrayName)
        if not self.ReplaceAttributes:
            offsetFilter.SetOffsetAbscissasArrayName(self.OffsetAbscissasArrayName)
            offsetFilter.SetOffsetNormalsArrayName(self.OffsetNormalsArrayName)
        else:
            offsetFilter.SetOffsetAbscissasArrayName(self.AbscissasArrayName)
            offsetFilter.SetOffsetNormalsArrayName(self.NormalsArrayName)
        offsetFilter.SetGroupIdsArrayName(self.GroupIdsArrayName)
        offsetFilter.SetCenterlineIdsArrayName(self.CenterlineIdsArrayName)
        offsetFilter.SetReferenceSystemsNormalArrayName(self.ReferenceSystemsNormalArrayName)
        offsetFilter.SetReferenceSystemsGroupIdsArrayName(self.GroupIdsArrayName)
        offsetFilter.SetReferenceGroupId(self.ReferenceGroupId)
        offsetFilter.Update()
        
        self.Centerlines = offsetFilter.GetOutput()

        if self.ReferenceGroupId == -1:
            self.ReferenceGroupId = offsetFilter.GetReferenceGroupId()

        if self.Centerlines.GetSource():
            self.Centerlines.GetSource().UnRegisterAllOutputs()

        if self.OwnRenderer:
            self.vmtkRenderer.Deallocate()

开发者ID:ChaliZhg，项目名称:vmtk，代码行数:59，代码来源:vmtkcenterlineoffsetattributes.py

示例10: Execute

    def Execute(self):

        if self.Surface == None:
            self.PrintError('Error: no Surface.')

        if not self.vmtkRenderer:
            self.vmtkRenderer = vmtkrenderer.vmtkRenderer()
            self.vmtkRenderer.Initialize()
            self.OwnRenderer = 1

        self.vmtkRenderer.RegisterScript(self) 

        triangleFilter = vtk.vtkTriangleFilter()
        triangleFilter.SetInput(self.Surface)
        triangleFilter.Update()

        self.Surface = triangleFilter.GetOutput()

        contourScalars = vtk.vtkDoubleArray()
        contourScalars.SetNumberOfComponents(1)
        contourScalars.SetNumberOfTuples(self.Surface.GetNumberOfPoints())
        contourScalars.SetName(self.ContourScalarsArrayName)
        contourScalars.FillComponent(0,self.OutsideValue)

        self.Surface.GetPointData().AddArray(contourScalars)
        self.Surface.GetPointData().SetActiveScalars(self.ContourScalarsArrayName)

        mapper = vtk.vtkPolyDataMapper()
        mapper.SetInput(self.Surface)
        mapper.ScalarVisibilityOn()
        self.Actor = vtk.vtkActor()
        self.Actor.SetMapper(mapper)
        self.Actor.GetMapper().SetScalarRange(-1.0,0.0)
        self.vmtkRenderer.Renderer.AddActor(self.Actor)

        self.ContourWidget = vtk.vtkContourWidget()
        self.ContourWidget.SetInteractor(self.vmtkRenderer.RenderWindowInteractor)

        rep = vtk.vtkOrientedGlyphContourRepresentation.SafeDownCast(self.ContourWidget.GetRepresentation())
        rep.GetLinesProperty().SetColor(1, 0.2, 0)
        rep.GetLinesProperty().SetLineWidth(3.0)

        pointPlacer = vtk.vtkPolygonalSurfacePointPlacer()
        pointPlacer.AddProp(self.Actor)
        pointPlacer.GetPolys().AddItem(self.Surface)
        rep.SetPointPlacer(pointPlacer)

        self.Interpolator = vtk.vtkPolygonalSurfaceContourLineInterpolator()
        self.Interpolator.GetPolys().AddItem(self.Surface)
        rep.SetLineInterpolator(self.Interpolator)

        self.vmtkRenderer.AddKeyBinding('space','Generate scalars',self.ScalarsCallback)
        self.vmtkRenderer.AddKeyBinding('d','Delete contour',self.DeleteContourCallback)
        self.vmtkRenderer.AddKeyBinding('i','Start interaction',self.InteractCallback)
        self.Display()

        if self.OwnRenderer:
            self.vmtkRenderer.Deallocate()

开发者ID:ChaliZhg，项目名称:vmtk，代码行数:58，代码来源:vmtksurfaceregiondrawing.py

示例11: BuildView

    def BuildView(self):

        if not self.vmtkRenderer:
            self.vmtkRenderer = vmtkrenderer.vmtkRenderer()
            self.vmtkRenderer.Initialize()
            self.OwnRenderer = 1

        self.vmtkRenderer.RegisterScript(self) 

        if self.Actor != None:
            self.vmtkRenderer.Renderer.RemoveActor(self.Actor)

        if self.ScalarBarActor != None:
            self.vmtkRenderer.Renderer.RemoveActor(self.ScalarBarActor)

        if self.Mesh != None:
            mapper = vtk.vtkDataSetMapper()
            mapper.SetInput(self.Mesh)
            if (self.ArrayName != ''):
                self.Mesh.GetPointData().SetActiveScalars(self.ArrayName)
            if (self.Mesh.GetPointData().GetScalars() != None):
                array = self.Mesh.GetPointData().GetScalars()
                if (self.ScalarRange[1] > self.ScalarRange[0]):
                    mapper.SetScalarRange(self.ScalarRange)
                else:
                    mapper.SetScalarRange(array.GetRange(0))
                if (self.Grayscale == 1):
                    lut = vtk.vtkLookupTable()
                    lut.SetValueRange(0.0,1.0)
                    lut.SetSaturationRange(0.0,0.0)
                    mapper.SetLookupTable(lut)
            self.Actor = vtk.vtkActor()
            self.Actor.SetMapper(mapper)
            if (self.FlatInterpolation == 1):
                self.Actor.GetProperty().SetInterpolationToFlat()
            self.Actor.GetProperty().SetOpacity(self.Opacity)
            self.vmtkRenderer.Renderer.AddActor(self.Actor)

        if (self.Legend == 1) & (self.Actor != None):
            self.ScalarBarActor = vtk.vtkScalarBarActor()
            self.ScalarBarActor.SetLookupTable(self.Actor.GetMapper().GetLookupTable())
            self.ScalarBarActor.GetLabelTextProperty().ItalicOff()
            self.ScalarBarActor.GetLabelTextProperty().BoldOff()
            self.ScalarBarActor.GetLabelTextProperty().ShadowOff()
##             self.ScalarBarActor.GetLabelTextProperty().SetColor(0.0,0.0,0.0)
            self.ScalarBarActor.SetLabelFormat('%.2f')
            self.vmtkRenderer.Renderer.AddActor(self.ScalarBarActor)

        if (self.Display == 1):
            self.vmtkRenderer.Render()

        if self.OwnRenderer:
            self.vmtkRenderer.Deallocate()

开发者ID:SaraZanchi，项目名称:vmtk，代码行数:53，代码来源:vmtkmeshviewer.py

示例12: Execute

    def Execute(self):
        if self.Surface == None:
            self.PrintError('Error: no Surface.')

        if not self.vmtkRenderer:
            self.vmtkRenderer = vmtkrenderer.vmtkRenderer()
            self.vmtkRenderer.Initialize()
            self.OwnRenderer = 1

        self.vmtkRenderer.RegisterScript(self) 

        triangleFilter = vtk.vtkTriangleFilter()
        triangleFilter.SetInputData(self.Surface)
        triangleFilter.Update()

        self.Surface = triangleFilter.GetOutput()

        self.tagviewer = vmtkscripts.vmtkSurfaceViewer()
        self.tagviewer.Surface = self.Surface
        self.tagviewer.vmtkRenderer = self.vmtkRenderer
        self.tagviewer.Representation = 'edges'
        self.tagviewer.Opacity = self.Opacity
        self.tagviewer.Execute()

        self.ContourWidget = vtk.vtkContourWidget()
        self.ContourWidget.SetInteractor(self.vmtkRenderer.RenderWindowInteractor)

        rep = vtk.vtkOrientedGlyphContourRepresentation.SafeDownCast(self.ContourWidget.GetRepresentation())
        rep.GetLinesProperty().SetColor(1, 0, 0)
        rep.GetLinesProperty().SetLineWidth(4.0)

        pointPlacer = vtk.vtkPolygonalSurfacePointPlacer()
        pointPlacer.AddProp(self.tagviewer.Actor)
        pointPlacer.GetPolys().AddItem(self.Surface)
        rep.SetPointPlacer(pointPlacer)

        self.Interpolator = vtk.vtkPolygonalSurfaceContourLineInterpolator()
        self.Interpolator.GetPolys().AddItem(self.Surface)
        rep.SetLineInterpolator(self.Interpolator)

        self.InputInfo("Building loop ...\n")

        self.vmtkRenderer.AddKeyBinding('space','Generate loop',self.LoopCallback)
        self.vmtkRenderer.AddKeyBinding('d','Delete contour',self.DeleteContourCallback)
        self.vmtkRenderer.AddKeyBinding('i','Start/stop contour drawing',self.InteractCallback)


        self.Display()


        if self.OwnRenderer:
            self.vmtkRenderer.Deallocate()

开发者ID:151706061，项目名称:vmtk，代码行数:52，代码来源:vmtksurfaceloopextraction.py

示例13: BuildView

    def BuildView(self):

        if not self.vmtkRenderer:
            self.vmtkRenderer = vmtkrenderer.vmtkRenderer()
            self.vmtkRenderer.Initialize()
            self.OwnRenderer = 1

        self.vmtkRenderer.RegisterScript(self) 

        self.PlaneWidget = vtk.vtkImplicitPlaneWidget()
        
        if self.Actor != None:
            self.vmtkRenderer.Renderer.RemoveActor(self.Actor)

        if self.Mesh != None:

            self.MeshCutFilter = vtk.vtkCutter()
            self.MeshCutFilter.SetInputData(self.Mesh)
            cutPlane = vtk.vtkPlane()
            self.PlaneWidget.GetPlane(cutPlane)
            self.MeshCutFilter.SetCutFunction(cutPlane)
            self.MeshCutFilter.Update()
            self.Surface = self.MeshCutFilter.GetOutput()
 
            self.PlaneWidget.AddObserver("StartInteractionEvent",self.StartPlaneCallback)
            self.PlaneWidget.AddObserver("EndInteractionEvent",self.EndPlaneCallback)

            mapper = vtk.vtkDataSetMapper()
            mapper.SetInputData(self.Mesh)
            
            self.Actor = vtk.vtkActor()
            self.Actor.SetMapper(mapper)
            self.vmtkRenderer.Renderer.AddActor(self.Actor)
            self.Actor.GetProperty().SetOpacity(self.Opacity)
            
         
        self.PlaneWidget.SetInteractor(self.vmtkRenderer.RenderWindowInteractor)
        self.PlaneWidget.SetPlaceFactor(1.25)
        self.PlaneWidget.DrawPlaneOn()
        self.PlaneWidget.GetPlaneProperty().SetOpacity(0.1)
        self.PlaneWidget.SetProp3D(self.Actor)
        self.PlaneWidget.PlaceWidget()
        self.PlaneWidget.SetOrigin(self.Actor.GetCenter())
        self.PlaneWidget.On()
        
        if (self.Display == 1):
            self.vmtkRenderer.Render()

        if self.OwnRenderer:
            self.vmtkRenderer.Deallocate()

开发者ID:151706061，项目名称:vmtk，代码行数:50，代码来源:vmtkmeshcutter.py

示例14: BuildView

    def BuildView(self):

        if not self.vmtkRenderer:
            self.vmtkRenderer = vmtkrenderer.vmtkRenderer()
            self.vmtkRenderer.Initialize()
            self.OwnRenderer = 1

        self.vmtkRenderer.RegisterScript(self) 

        if self.Volume:
            self.vmtkRenderer.Renderer.RemoveVolume(self.Volume)

        if (self.ArrayName != ''):
            self.Image.GetPointData().SetActiveScalars(self.ArrayName)

        scalarRange = [0.0, 0.0]

        if self.WindowLevel[0] > 0.0:
            scalarRange = [self.WindowLevel[1] - self.WindowLevel[0]/2.0, self.WindowLevel[1] + self.WindowLevel[0]/2.0]
        else:
            scalarRange = self.Image.GetScalarRange()

        colorTransferFunction = vtk.vtkColorTransferFunction()
        colorTransferFunction.AddRGBPoint(scalarRange[0], 0.0, 0.0, 0.0)
        colorTransferFunction.AddRGBPoint(scalarRange[1], 1.0, 1.0, 1.0)

        volumeMapper = vtk.vtkFixedPointVolumeRayCastMapper()
        volumeMapper.SetInput(self.Image)
        volumeMapper.SetBlendModeToMaximumIntensity()
        if self.AutoSampleDistance:
            volumeMapper.AutoAdjustSampleDistancesOn()
        else:
            volumeMapper.SetSampleDistance(self.SampleDistance)
        
        volumeProperty = vtk.vtkVolumeProperty()
        volumeProperty.ShadeOn()
        volumeProperty.SetInterpolationTypeToLinear()
        volumeProperty.SetColor(colorTransferFunction)
        
        self.Volume = vtk.vtkVolume()
        self.Volume.SetMapper(volumeMapper)
        self.Volume.SetProperty(volumeProperty)
      
        self.vmtkRenderer.Renderer.AddVolume(self.Volume)

        if (self.Display == 1):
            self.vmtkRenderer.Render()

        if self.OwnRenderer:
            self.vmtkRenderer.Deallocate()

开发者ID:ChaliZhg，项目名称:vmtk，代码行数:50，代码来源:vmtkimagemipviewer.py

示例15: Execute

    def Execute(self):
        if (self.Image == None) & (self.Display == 1):
            self.PrintError('Error: no Image.')

        if not self.vmtkRenderer:
            self.vmtkRenderer = vmtkrenderer.vmtkRenderer()
            self.vmtkRenderer.Initialize()
            self.OwnRenderer = 1
            
        self.PaintedImage = vtk.vtkImageData()
        self.PaintedImage.DeepCopy(self.Image)

        self.vmtkRenderer.RegisterScript(self) 

        ##self.PrintLog('Ctrl +  left click to add seed.')
        self.Picker = vtk.vtkCellPicker()
        self.Picker.SetTolerance(0.005)

        self.PlaneWidgetX = vtk.vtkImagePlaneWidget()
        self.PlaneWidgetX.SetInteractor(self.vmtkRenderer.RenderWindowInteractor)
        self.PlaneWidgetX.AddObserver("StartInteractionEvent", self.StartInteraction)
        self.PlaneWidgetX.AddObserver("InteractionEvent", self.Interaction)
        self.PlaneWidgetX.AddObserver("EndInteractionEvent", self.EndInteraction)
        self.PlaneWidgetX.SetPicker(self.Picker)
        self.PlaneWidgetY = vtk.vtkImagePlaneWidget()
        self.PlaneWidgetY.SetInteractor(self.vmtkRenderer.RenderWindowInteractor)
        self.PlaneWidgetY.AddObserver("StartInteractionEvent", self.StartInteraction)
        self.PlaneWidgetY.AddObserver("InteractionEvent", self.Interaction)
        self.PlaneWidgetY.AddObserver("EndInteractionEvent", self.EndInteraction)
        self.PlaneWidgetY.SetPicker(self.Picker)
        self.PlaneWidgetZ = vtk.vtkImagePlaneWidget()
        self.PlaneWidgetZ.SetInteractor(self.vmtkRenderer.RenderWindowInteractor)
        self.PlaneWidgetZ.AddObserver("StartInteractionEvent", self.StartInteraction)
        self.PlaneWidgetZ.AddObserver("InteractionEvent", self.Interaction)
        self.PlaneWidgetZ.AddObserver("EndInteractionEvent", self.EndInteraction)
        self.PlaneWidgetZ.SetPicker(self.Picker)

        self.BuildView()
        
        self.WidgetsOff()

        if self.OwnRenderer:
            self.vmtkRenderer.Deallocate()

开发者ID:tangui，项目名称:vmtk，代码行数:43，代码来源:vmtkimagepainter.py

示例16: Execute

    def Execute(self):

        if (self.Mesh == None):
            self.PrintError('Error: no Mesh.')

        self.Planes = vtk.vtkPlanes()
        self.Clipper = vtk.vtkClipDataSet()
        self.Clipper.SetInput(self.Mesh)
        self.Clipper.SetClipFunction(self.Planes)
        self.Clipper.GenerateClippedOutputOn()
        self.Clipper.InsideOutOn()
        
        if not self.vmtkRenderer:
            self.vmtkRenderer = vmtkrenderer.vmtkRenderer()
            self.vmtkRenderer.Initialize()
            self.OwnRenderer = 1

        self.vmtkRenderer.RegisterScript(self) 

        mapper = vtk.vtkDataSetMapper()
        mapper.SetInput(self.Mesh)
        mapper.ScalarVisibilityOff()
        self.Actor = vtk.vtkActor()
        self.Actor.SetMapper(mapper)
        self.vmtkRenderer.Renderer.AddActor(self.Actor)

        self.BoxWidget = vtk.vtkBoxWidget()
        self.BoxWidget.SetInteractor(self.vmtkRenderer.RenderWindowInteractor)
        self.BoxWidget.GetFaceProperty().SetColor(0.6,0.6,0.2)
        self.BoxWidget.GetFaceProperty().SetOpacity(0.25)

        self.vmtkRenderer.AddKeyBinding('i','Interact.', self.InteractCallback)
        self.vmtkRenderer.AddKeyBinding('space','Clip.', self.ClipCallback)

        self.Display()

        if self.OwnRenderer:
            self.vmtkRenderer.Deallocate()
        
        if self.Mesh.GetSource():
            self.Mesh.GetSource().UnRegisterAllOutputs()

开发者ID:SaraZanchi，项目名称:vmtk，代码行数:41，代码来源:vmtkmeshclipper.py

示例17: Execute

    def Execute(self):

        if not self.Centerlines:
            self.PrintError("Error: No input centerlines.")
            return

        if not self.vmtkRenderer:
            self.vmtkRenderer = vmtkrenderer.vmtkRenderer()
            self.vmtkRenderer.Initialize()
            self.OwnRenderer = 1

        self.vmtkRenderer.RegisterScript(self)

        if self.CellDataArrayName:
            cellCenters = vtk.vtkCellCenters()
            cellCenters.SetInputData(self.Centerlines)
            cellCenters.Update()
            cellCenters.GetOutput().GetPointData().SetActiveScalars(self.CellDataArrayName)
            labelsMapper = vtk.vtkLabeledDataMapper()
            labelsMapper.SetInputConnection(cellCenters.GetOutputPort())
            labelsMapper.SetLabelModeToLabelScalars()
            labelsActor = vtk.vtkActor2D()
            labelsActor.SetMapper(labelsMapper)
            self.vmtkRenderer.Renderer.AddActor(labelsActor)

        centerlineMapper = vtk.vtkPolyDataMapper()
        centerlineMapper.SetInputData(self.Centerlines)
        if self.CellDataArrayName and not self.PointDataArrayName:
            centerlineMapper.ScalarVisibilityOn()
            centerlineMapper.SetScalarModeToUseCellData()
            self.Centerlines.GetCellData().SetActiveScalars(self.CellDataArrayName)
            centerlineMapper.SetScalarRange(self.Centerlines.GetCellData().GetScalars().GetRange(0))
        elif self.PointDataArrayName:
            centerlineMapper.ScalarVisibilityOn()
            centerlineMapper.SetScalarModeToUsePointData()
            self.Centerlines.GetPointData().SetActiveScalars(self.PointDataArrayName)
            centerlineMapper.SetScalarRange(self.Centerlines.GetPointData().GetScalars().GetRange(0))
        else:
            centerlineMapper.ScalarVisibilityOff()

        if self.ColorMap == "grayscale":
            lut = centerlineMapper.GetLookupTable()
            lut.SetNumberOfTableValues(self.NumberOfColors)
            lut.SetValueRange(0.0, 1.0)
            lut.SetSaturationRange(0.0, 0.0)
            lut.Build()
            centerlineMapper.SetLookupTable(lut)

        if self.ColorMap == "rainbow":
            lut = centerlineMapper.GetLookupTable()
            lut.SetHueRange(0.666667, 0.0)
            lut.SetSaturationRange(0.75, 0.75)
            lut.SetValueRange(1.0, 1.0)
            lut.SetAlphaRange(1.0, 1.0)
            lut.SetNumberOfColors(self.NumberOfColors)
            lut.Build()
            centerlineMapper.SetLookupTable(lut)

        if self.ColorMap == "blackbody":
            lut = centerlineMapper.GetLookupTable()
            lut.SetNumberOfTableValues(self.NumberOfColors)
            colorTransferFunction = vtk.vtkColorTransferFunction()
            colorTransferFunction.SetColorSpaceToRGB()
            colorTransferFunction.AddRGBPoint(0, 0.0, 0.0, 0.0)
            colorTransferFunction.AddRGBPoint(0.4, 0.901961, 0.0, 0.0)
            colorTransferFunction.AddRGBPoint(0.8, 0.901961, 0.901961, 0.0)
            colorTransferFunction.AddRGBPoint(1.0, 1.0, 1.0, 1.0)
            for ii, ss in enumerate([float(xx) / float(self.NumberOfColors) for xx in range(self.NumberOfColors)]):
                cc = colorTransferFunction.GetColor(ss)
                lut.SetTableValue(ii, cc[0], cc[1], cc[2], 1.0)
            lut.Build()
            centerlineMapper.SetLookupTable(lut)

        if self.ColorMap == "cooltowarm":
            lut = centerlineMapper.GetLookupTable()
            lut.SetNumberOfTableValues(self.NumberOfColors)
            colorTransferFunction = vtk.vtkColorTransferFunction()
            colorTransferFunction.SetColorSpaceToDiverging()
            colorTransferFunction.AddRGBPoint(0, 0.231373, 0.298039, 0.752941)
            colorTransferFunction.AddRGBPoint(0.5, 0.865003, 0.865003, 0.865003)
            colorTransferFunction.AddRGBPoint(1.0, 0.705882, 0.0156863, 0.14902)
            for ii, ss in enumerate([float(xx) / float(self.NumberOfColors) for xx in range(self.NumberOfColors)]):
                cc = colorTransferFunction.GetColor(ss)
                lut.SetTableValue(ii, cc[0], cc[1], cc[2], 1.0)
            lut.Build()
            centerlineMapper.SetLookupTable(lut)

        centerlineActor = vtk.vtkActor()
        centerlineActor.SetMapper(centerlineMapper)
        self.vmtkRenderer.Renderer.AddActor(centerlineActor)

        scalarBarActor = None
        if self.Legend and centerlineActor and self.PointDataArrayName:
            scalarBarActor = vtk.vtkScalarBarActor()
            scalarBarActor.SetLookupTable(centerlineActor.GetMapper().GetLookupTable())
            scalarBarActor.GetLabelTextProperty().ItalicOff()
            scalarBarActor.GetLabelTextProperty().BoldOff()
            scalarBarActor.GetLabelTextProperty().ShadowOff()
            scalarBarActor.SetLabelFormat("%.2f")
            scalarBarActor.SetTitle(self.PointDataArrayName)
#.........这里部分代码省略.........

开发者ID:aabdulwahed，项目名称:vmtk，代码行数:101，代码来源:vmtkcenterlineviewer.py

示例18: Execute

    def Execute(self):

        if self.Surface == None:
            self.PrintError('Error: No input surface.')

        if self.ExtensionMode == "centerlinedirection" and self.Centerlines == None:
            self.PrintError('Error: No input centerlines.')

        boundaryIds = vtk.vtkIdList()

        if self.Interactive:
            if not self.vmtkRenderer:
                import vmtkrenderer
                self.vmtkRenderer = vmtkrenderer.vmtkRenderer()
                self.vmtkRenderer.Initialize()
                self.OwnRenderer = 1
 
            boundaryExtractor = vtkvmtk.vtkvmtkPolyDataBoundaryExtractor()
            boundaryExtractor.SetInput(self.Surface)
            boundaryExtractor.Update()
            boundaries = boundaryExtractor.GetOutput()
            numberOfBoundaries = boundaries.GetNumberOfCells()
            seedPoints = vtk.vtkPoints()
            for i in range(numberOfBoundaries):
                barycenter = [0.0, 0.0, 0.0]
                vtkvmtk.vtkvmtkBoundaryReferenceSystems.ComputeBoundaryBarycenter(boundaries.GetCell(i).GetPoints(),barycenter)
                seedPoints.InsertNextPoint(barycenter)
            seedPolyData = vtk.vtkPolyData()
            seedPolyData.SetPoints(seedPoints)
            seedPolyData.Update()
            labelsMapper = vtk.vtkLabeledDataMapper();
            labelsMapper.SetInput(seedPolyData)
            labelsMapper.SetLabelModeToLabelIds()
            labelsActor = vtk.vtkActor2D()
            labelsActor.SetMapper(labelsMapper)
    
            self.vmtkRenderer.Renderer.AddActor(labelsActor)
    
            surfaceMapper = vtk.vtkPolyDataMapper()
            surfaceMapper.SetInput(self.Surface)
            surfaceMapper.ScalarVisibilityOff()
            surfaceActor = vtk.vtkActor()
            surfaceActor.SetMapper(surfaceMapper)
            surfaceActor.GetProperty().SetOpacity(0.25)
    
            self.vmtkRenderer.Renderer.AddActor(surfaceActor)
    
            self.vmtkRenderer.Render()
    
            self.vmtkRenderer.Renderer.RemoveActor(labelsActor)
            self.vmtkRenderer.Renderer.RemoveActor(surfaceActor)
            
            ok = False
            while not ok:
                labelString = self.InputText("Please input boundary ids: ",self.LabelValidator)
                labels = [int(label) for label in labelString.split()]
                ok = True
                for label in labels:
                    if label not in range(numberOfBoundaries):
                        ok = False

            for label in labels:
                boundaryIds.InsertNextId(label)

        flowExtensionsFilter = vtkvmtk.vtkvmtkPolyDataFlowExtensionsFilter()
        flowExtensionsFilter.SetInput(self.Surface)
        flowExtensionsFilter.SetCenterlines(self.Centerlines)
        flowExtensionsFilter.SetSigma(self.Sigma)
        flowExtensionsFilter.SetAdaptiveExtensionLength(self.AdaptiveExtensionLength)
        flowExtensionsFilter.SetAdaptiveExtensionRadius(self.AdaptiveExtensionRadius)
        flowExtensionsFilter.SetAdaptiveNumberOfBoundaryPoints(self.AdaptiveNumberOfBoundaryPoints)
        flowExtensionsFilter.SetExtensionLength(self.ExtensionLength)
        flowExtensionsFilter.SetExtensionRatio(self.ExtensionRatio)
        flowExtensionsFilter.SetExtensionRadius(self.ExtensionRadius)
        flowExtensionsFilter.SetTransitionRatio(self.TransitionRatio)
        flowExtensionsFilter.SetCenterlineNormalEstimationDistanceRatio(self.CenterlineNormalEstimationDistanceRatio)
        flowExtensionsFilter.SetNumberOfBoundaryPoints(self.TargetNumberOfBoundaryPoints)
        if self.ExtensionMode == "centerlinedirection":
            flowExtensionsFilter.SetExtensionModeToUseCenterlineDirection()
        elif self.ExtensionMode == "boundarynormal":
            flowExtensionsFilter.SetExtensionModeToUseNormalToBoundary()
        if self.InterpolationMode == "linear":
            flowExtensionsFilter.SetInterpolationModeToLinear()
        elif self.InterpolationMode == "thinplatespline":
            flowExtensionsFilter.SetInterpolationModeToThinPlateSpline()
        if self.Interactive:
            flowExtensionsFilter.SetBoundaryIds(boundaryIds)
        flowExtensionsFilter.Update()

        self.Surface = flowExtensionsFilter.GetOutput()

        if self.Surface.GetSource():
            self.Surface.GetSource().UnRegisterAllOutputs()

开发者ID:ValentinaRossi，项目名称:vmtk，代码行数:93，代码来源:vmtkflowextensions.py

示例19: Execute

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

Python logger.setup_logging函数代码示例发布时间：2022-05-26

Python vms_lib.getsyi函数代码示例发布时间：2022-05-26

Python util.grid_equal函数代码示例

1 Python 入门教程

Python入门教程 Python 是一种解释型、面向对象、动态数据类型的高级程序设计语言。 P

阅读：13772|2022-01-22

2 Python wikiutil.getFrontPage函数代码示例

Python wikiutil.getFrontPage函数代码示例

阅读：9578|2022-05-24

3 Python 简介

Python 简介 Python 是一个高层次的结合了解释性、编译性、互动性和面向对象的脚本

阅读：4066|2022-01-22

4 Python tests.group函数代码示例

Python tests.group函数代码示例

阅读：4039|2022-05-27

5 Python util.check_if_user_has_permission

Python util.check_if_user_has_permission函数代码示例

阅读：3819|2022-05-27

6 Python 操练实例98

Python 练习实例98 Python 100例题目：从键盘输入一个字符串，将小写字母全部转换成大

阅读：3499|2022-01-22

7 Python 环境搭建

Python 环境搭建本章节我们将向大家介绍如何在本地搭建 Python 开发环境。 Py

阅读：3022|2022-01-22

8 Python output.darkgreen函数代码示例

Python output.darkgreen函数代码示例

阅读：2638|2022-05-25

9 Python 基础语法

Python 基础语法 Python 语言与 Perl，C 和 Java 等语言有许多相似之处。但是，也

阅读：2624|2022-01-22

10 Python 中文编码

Python 中文编码前面章节中我们已经学会了如何用 Python 输出 Hello, World!，英文没

阅读：2290|2022-01-22

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服

地址：深圳市南山区西丽大学城创智工业园

电邮：jeky_zhao#qq.com

移动电话：139-2527-9053

客服电话

电子邮件

Python vmtkrenderer.vmtkRenderer函数代码示例

示例1: Execute

示例2: Execute

示例3: Execute

示例4: Execute

示例5: Execute

示例6: Execute

示例7: Execute

示例8: Execute

示例9: Execute

示例10: Execute

示例11: BuildView

示例12: Execute

示例13: BuildView

示例14: BuildView

示例15: Execute

示例16: Execute

示例17: Execute

示例18: Execute

示例19: Execute

请发表评论

全部评论

上一篇：

下一篇：

Python util.grid_equal函数代码示例

Python util.get_worker_name函数代码示例

Python util.get_webmention_target函数代

Python util.get_uuid函数代码示例

Python util.get_type_by_name函数代码示例

Python util.grid_equal函数代码示例

Python util.get_worker_name函数代码示例

Python util.get_webmention_target函数代

Python util.get_uuid函数代码示例

Python util.get_type_by_name函数代码示例

Python util.get_stdout函数代码示例

关于我们

产品与服务

解决方案

139-2527-9053