本文整理汇总了Python中weioLib.weioConfig.getConfiguration函数的典型用法代码示例。如果您正苦于以下问题:Python getConfiguration函数的具体用法?Python getConfiguration怎么用?Python getConfiguration使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了getConfiguration函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的Python代码示例。
示例1: updateNetworkData
def updateNetworkData(self, rq):
data = {}
self.dns_name = rq['data']['dns_name']
self.auto_to_ap = rq['data']['auto_to_ap']
config = weioConfig.getConfiguration()
config['dns_name'] = self.dns_name + ".local"
config['auto_to_ap'] = self.auto_to_ap
if (platform.machine() == 'mips'):
# Change avahi name
command = "sh scripts/change_boardname.sh " + self.dns_name
try:
subprocess.call(command, shell=True)
firstTimeSwitch = "NO"
config['first_time_run']=firstTimeSwitch
data['data'] = "msg_success"
except:
output = "ERR_CMD BRDNAME"
data['data'] = "msg_fail"
print output
else:
# On PC
firstTimeSwitch = "NO"
config['first_time_run']=firstTimeSwitch
data['data'] = "msg_success"
# Save new user data in config file
weioConfig.saveConfiguration(config);
data['requested'] = "updataNetwork"
self.send(json.dumps(data))
开发者ID:jordonwu,项目名称:weio,代码行数:31,代码来源:userSettingsHandler.py
示例2: changeProject
def changeProject(self,rq):
#print "CHANGE PROJECT", rq
# get configuration from file
print "TO CHANGE ", rq
config = weioConfig.getConfiguration()
virtPath = rq['data']
storage = os.path.dirname(virtPath)
print 'STORAGE', storage
path = "www/"+virtPath
print 'STORAGE', path
config["last_opened_project"] = path
weioConfig.saveConfiguration(config);
# In this way we avoid migrations between pc and weio and other archs
try :
os.remove(path+"/www")
except:
print "Symlink don't exist. Will create new one for www in this project"
os.symlink(config["absolut_root_path"] + "/www/", path + "/www")
data = {}
data['requested'] = rq['request']
self.broadcast(clients, json.dumps(data))
rqlist = ["stop", "getLastProjectName", "getUserProjetsFolderList"]
for i in range(0,len(rqlist)):
rq['request'] = rqlist[i]
callbacks[ rq['request'] ](self, rq)
开发者ID:WRTIOT,项目名称:weio,代码行数:31,代码来源:dashboardHandler.py
示例3: decompressNewProject
def decompressNewProject(self, rq):
print "decompress"
f = rq['data']
name = f['name']
contents = f['data']
storageUnit = rq['storageUnit'] +"/"
#print contents
# get configuration from file
confFile = weioConfig.getConfiguration()
pathCurrentProject = "www/" + storageUnit
projectName = name.split(".tar")[0]
data = {}
if (weioFiles.checkIfDirectoryExists(pathCurrentProject+projectName) is False) :
#decode from base64, file is binary
bb = contents
bb = bb.split(",")[1] # split header, for example: "data:image/jpeg;base64,"
weioFiles.saveRawContentToFile(pathCurrentProject+name, bb.decode("base64"))
#print "save to ", pathCurrentProject+name
weioFiles.createDirectory(pathCurrentProject+projectName)
#print "mkdir ", pathCurrentProject+"userProjects/"+projectName
weioFiles.unTarFile(pathCurrentProject+name, pathCurrentProject+projectName)
#print "untar ", pathCurrentProject+"userProjects/"+projectName
data['request'] = "changeProject"
data['data'] = storageUnit+projectName
self.changeProject(data)
else :
data['requested'] = 'status'
data['status'] = "Error this projet already exists"
self.broadcast(clients, json.dumps(data))
开发者ID:Capt-Cpt,项目名称:weio,代码行数:34,代码来源:dashboardHandler.py
示例4: createNewFile
def createNewFile(self, rq):
data = {}
# this function is similar to saveFile
# echo given request
data['requested'] = rq['request']
# don't echo given data to spare unnecessary communication, just return name
f = rq['data']
name = f['name']
contents = f['data']
# get configuration from file
confFile = weioConfig.getConfiguration()
print "WILL BE SAVED IN ", name
if ((".html" in name) or (".py" in name) or (".json" in name) or
(".css" in name) or (".txt" in name) or (".js" in name) or
(".md" in name) or (".svg" in name) or (".xml" in name) or
(".less" in name) or (".coffee" in name)):
weioFiles.saveRawContentToFile(confFile["last_opened_project"] + "/" + name, contents)
else :
#decode from base64, file is binary
bin = contents
bin = bin.split(",")[1] # split header, for example: "data:image/jpeg;base64,"
weioFiles.saveRawContentToFile(confFile["last_opened_project"] + "/" + name, bin.decode("base64"))
#print (pathCurrentProject+pathname)
data['status'] = name + " has been created"
self.broadcast(clients, json.dumps(data))
开发者ID:WRTIOT,项目名称:weio,代码行数:33,代码来源:editorHandler.py
示例5: createTarForProject
def createTarForProject(self, rq):
# TEST IF NAME IS OK FIRST
# get configuration from file
config = weioConfig.getConfiguration()
data = {}
data['requested'] = "status"
data['status'] = "Making archive..."
self.broadcast(clients, json.dumps(data))
data['requested'] = rq['request']
splitted = config["last_opened_project"].split("/")
print "CHOOSE NAME", splitted
lp = splitted[-1]
if (weioFiles.checkIfDirectoryExists(config["last_opened_project"])):
weioFiles.createTarfile(config["last_opened_project"] + "/" + lp + ".tar",
config["last_opened_project"]+"/")
data['status'] = "Project archived"
print "project archived"
else :
data['status'] = "Error archiving project"
self.broadcast(clients, json.dumps(data))
开发者ID:Capt-Cpt,项目名称:weio,代码行数:26,代码来源:dashboardHandler.py
示例6: loadUserProjectMain
def loadUserProjectMain(self):
confFile = weioConfig.getConfiguration()
# Get the last name of project and run it
projectModule = confFile["last_opened_project"].replace('/', '.') + ".main"
#print "CALL", projectModule
result = None
if (self.lastCalledProjectPath == projectModule):
#print "RELOADING"
result = reload(self.userMain)
else :
#print "NEW IMPORT"
# Import userMain from local module
try :
userMain = __import__(projectModule, fromlist=[''])
result = userMain
except :
#print "MODULE CAN'T BE LOADED"
result = None
self.lastCalledProjectPath = projectModule
return result
开发者ID:sethkontny,项目名称:weio,代码行数:25,代码来源:weioRunner.py
示例7: newProject
def newProject(self, rq):
config = weioConfig.getConfiguration()
print "NEW PROJECT", rq
data = {}
data['requested'] = rq['request']
path = ""
storage = rq['storageUnit']
path = "www/" + rq['storageUnit'] + "/" + rq['path']
print "CREATE PROJECT", path
if (len(path)>0):
if (weioFiles.checkIfDirectoryExists(path)):
print "ALREADY EXISTS"
data['status'] = "Can't create project"
data['error'] = "already exists"
data['path'] = path
self.broadcast(clients, json.dumps(data))
else :
weioFiles.createDirectory(path)
# ADD HERE SOME DEFAULT FILES
# adding __init__.py
weioFiles.saveRawContentToFile(path + "/__init__.py", "")
# make symlink to www/
if (storage == "sd" or storage == "usbFlash"):
if (storage == "sd"):
if os.path.isdir(path):
if not (os.path.exists(path + "/www")):
print "COPYING TO ", path + "/www"
copytree(config["absolut_root_path"] + "/www/", path + "/www", ignore=ignore_patterns('sd', 'flash', 'examples', 'usbFlash'))
print "OK"
else:
if not (os.path.exists(path + "/www")):
print "COPYING TO ", path + "/www"
copytree(config["absolut_root_path"] + "/www/", path + "/www", ignore=ignore_patterns('sd', 'flash', 'examples', 'usbFlash'))
print "OK"
else:
try:
os.remove(path + "/www")
except:
print "Symlink don't exist. Will create new one for this project"
os.symlink(config["absolut_root_path"] + "/www/", path + "/www")
# copy all files from directory boilerplate to destination
mypath = "www/libs/weio/boilerPlate/"
onlyfiles = [ f for f in os.listdir(mypath) if isfile(join(mypath,f)) ]
for f in onlyfiles:
copyfile(mypath+f, path +"/"+f)
print "LASTOPENED new project", path
config["last_opened_project"] = path
weioConfig.saveConfiguration(config);
data['status'] = "New project created"
data['path'] = path
self.broadcast(clients, json.dumps(data))
else:
print "BAD PATHNAME"
开发者ID:Capt-Cpt,项目名称:weio,代码行数:59,代码来源:dashboardHandler.py
示例8: sendUserData
def sendUserData(self,rq):
data = {}
# get configuration from file
config = weioConfig.getConfiguration()
data['requested'] = rq['request']
data['name'] = config["user"]
self.broadcast(clients, json.dumps(data))
开发者ID:Capt-Cpt,项目名称:weio,代码行数:8,代码来源:dashboardHandler.py
示例9: checkPermission
def checkPermission(self, password, username):
confFile = weioConfig.getConfiguration()
validPass = confFile['password']
#if username == "admin" and password == "admin":
# return True
if password == validPass:
return True
return False
开发者ID:WRTIOT,项目名称:weio,代码行数:8,代码来源:loginHandler.py
示例10: post
def post(self):
confFile = weioConfig.getConfiguration()
fullName = self.get_argument("fullName", "")
passwd = self.get_argument("password", "")
boardname = self.get_argument("boardname", "")
# This is two letters country code to be used to setup wifi region
countryCode = self.get_argument("countryCode", "")
print "************ ", fullName, passwd, boardname, countryCode
data = {}
# OK now is time to setup username and password
confFile['user'] = fullName
weioConfig.saveConfiguration(confFile)
output = "OK PASSWD"
#echo -e "weio\nweio" | passwd
# ATTENTION, DON'T MESS WITH THIS STUFF ON YOUR LOCAL COMPUTER
# First protection is mips detection, second is your own OS
# who hopefully needs sudo to change passwd on the local machine
if (platform.machine() == 'mips'):
# Change root password
command = "sh scripts/change_root_pswd.sh " + passwd
print "EXEC : " + command
try:
subprocess.call(command, shell=True)
firstTimeSwitch = "NO"
confFile['first_time_run']=firstTimeSwitch
except:
output = "ERR_CMD PASSWD"
print output
# Change avahi name
command = "sh scripts/change_boardname.sh " + boardname
print "EXEC : " + command
try:
subprocess.call(command, shell=True)
except:
output = "ERR_CMD BRDNAME"
else:
# On PC
firstTimeSwitch = "NO"
confFile['first_time_run']=firstTimeSwitch
# Save new password in the config file
confFile['password'] = passwd
# Write in config file
weioConfig.saveConfiguration(confFile)
self.set_secure_cookie("user", tornado.escape.json_encode("weio"))
self.redirect(self.get_argument("next", u"/"))
开发者ID:criptonauta,项目名称:weio,代码行数:58,代码来源:signinHandler.py
示例11: downloadUpdate
def downloadUpdate(self, data):
config = weioConfig.getConfiguration()
# ok now save binary in /tmp (folder in RAM)
print "downloaded"
fileToStoreUpdate = ""
if (platform.machine()=="mips") :
fileToStoreUpdate = "/tmp/weioUpdate.tar.gz"
pathToDecompressUpdate = "/tmp"
else :
fileToStoreUpdate = "./weioUpdate.tar.gz"
pathToDecompressUpdate = "./"
if not(self.downloadUpdateLink is None):
sw = functools.partial(self.sizeWatcher, fileToStoreUpdate, self.updateDownloadSize)
sizeCheckerCallback = ioloop.PeriodicCallback(sw, 500)
sizeCheckerCallback.start()
self.startDownload(self.downloadUpdateLink, fileToStoreUpdate)
sizeCheckerCallback.stop()
# Check is file size is the same as on the server
sizeOnDisk = os.path.getsize(fileToStoreUpdate)
print "comparing sizes", sizeOnDisk, self.updateDownloadSize
if (sizeOnDisk == self.updateDownloadSize):
# OK
print "File size is OK"
self.progressInfo("50%", "File size OK")
print "Bundle decompressing"
tar = tarfile.open(fileToStoreUpdate)
tar.extractall(pathToDecompressUpdate)
tar.close()
print "Bundle decompressed"
#self.progressInfo("80%", "WeIO Bundle decompressed")
# kill arhive that we don't need anymore to free RAM
os.remove(fileToStoreUpdate)
global currentWeioConfigurator
print "Setting kill flag to YES in current config.weio"
print "Now I'm ready to exit Tornado and install new version"
config["kill_flag"] = "YES"
weioConfig.saveConfiguration(config)
#self.progressInfo("81%", "WeIO installing")
# Now quit Tornado and leave script to do his job
ioloop.IOLoop.instance().stop()
exit()
else :
print "MD5 checksum is not OK, retrying..."
if (self.downloadTries<2):
self.progressInfo("5%", "Downloading Bundle again, MD5 checkum was not correct")
self.downloadUpdate(None)
else:
print "Something went wrong. Check Internet connection and try again later"
self.progressInfo("0%", "Something went wrong. Check Internet connection and try again later")
self.downloadTries+=1
开发者ID:ukicar,项目名称:weio-1,代码行数:58,代码来源:updaterHandler.py
示例12: duplicateProject
def duplicateProject(self, rq):
config = weioConfig.getConfiguration()
print "DUPLICATE",rq
storage = rq['storageUnit']
path = "www/" + rq['storageUnit'] + "/" + rq['path']
print "DUPLICATE PROJECT", path
data = {}
if (len(path)>0):
if (storage != "sd" and storage != "usbFlash"):
# Destroy symlink
if os.path.islink(config["last_opened_project"]+"/www"):
os.remove(config["last_opened_project"]+"/www")
else:
shutil.rmtree(config["last_opened_project"]+"/www")
# copy all files
try:
copytree(config["last_opened_project"], path)
except:
print sys.exc_info()[0]
else:
if os.path.isdir("www/"+rq['storageUnit']):
try:
copytree(config["last_opened_project"], path, ignore=ignore_patterns('www'))
except:
print sys.exc_info()[0]
if (storage != "sd" and storage != "usbFlash"):
# Recreate symlink
os.symlink(config["absolut_root_path"] + "/www/", path + "/www")
else:
if not (os.path.exists(path + "/www")):
copytree(config["absolut_root_path"] + "/www/", path + "/www", ignore=ignore_patterns('sd', 'flash', 'examples', 'usbFlash'))
config["last_opened_project"] = path
weioConfig.saveConfiguration(config)
data['status'] = "Project duplicated"
data['requested'] = "status"
self.broadcast(clients, json.dumps(data))
# now go to newely duplicated project
data['request'] = "changeProject"
data['data'] = rq['storageUnit'] + "/" + rq['path']
self.changeProject(data)
else:
print "BAD PATHNAME"
data['status'] = "Error duplicating project"
data['requested'] = "status"
self.broadcast(clients, json.dumps(data))
开发者ID:Capt-Cpt,项目名称:weio,代码行数:57,代码来源:dashboardHandler.py
示例13: sendUserPortNumber
def sendUserPortNumber(self, rq):
# get configuration from file
config = weioConfig.getConfiguration()
data = {}
data['requested'] = rq['request']
data['data'] = config["userAppPort"]
# Send connection information to the client
self.broadcast(clients, json.dumps(data))
开发者ID:WRTIOT,项目名称:weio,代码行数:10,代码来源:editorHandler.py
示例14: checkConnection
def checkConnection(self) :
command = "iwconfig " + self.interface
status = weioSubprocess.shellBlocking(command)
#print(str(status))
# We are in STA mode, so check if we are connected
if (status == "ERR_CMD") or "No such device" in status :
# WiFi is DOWN
print "Wifi is DOWN"
self.mode = None
# Check if wlan0 is in Master mode
elif "Mode:Master" in status :
print "AP Mode"
self.mode = "ap"
#self.essid = status.strip().startswith("ESSID:").split(':')[1]
elif "Mode:Managed" in status :
if "Access Point: Not-Associated" in status :
self.mode = None
else :
self.mode = "sta"
# We can not serve anything if we are not in sta or ap mode
#print "CHECKING WIFI!"
#if (self.mode != None):
# print "self.mode = " + self.mode
#print "weioIpAddress.getLocalIpAddress() = " + weioIpAddress.getLocalIpAddress()
if (self.mode == None):
self.disconnectedCounter = self.disconnectedCounter + 1
else:
self.disconnectedCounter = 0
config = weioConfig.getConfiguration()
if ((self.disconnectedCounter >= 2 or (self.mode == "sta" and weioIpAddress.getLocalIpAddress() == ''))
and config['auto_to_ap'] == "YES"):
# Move to Master mode
print "Trying to move to AP RESCUE mode..."
subprocess.call("scripts/wifi_set_mode.sh rescue", shell=True)
self.disconnectedCounter = 0
# Restart Tornado (shell script bring it up whenever it exits)
#cmd = "/etc/init.d/weio_run restart"
#weioSubprocess.shellBlocking(cmd)
print "************* EXITING ****************"
os._exit(os.EX_OK)
# At this point connection has been maid, and all we have to do is check ESSID
#print "WIFI ESSID : ", status
pat = r"(?<=ESSID:\")(.*\n?)(?=\")"
#print "RESULT", re.findall(pat, status)[0]
essidName = re.findall(pat, status)
if (len(essidName)>0):
self.essid = essidName[0]
开发者ID:Capt-Cpt,项目名称:weio,代码行数:55,代码来源:weioWifi.py
示例15: sendIp
def sendIp(self,rq):
# get configuration from file
config = weioConfig.getConfiguration()
data = {}
ip = weioIpAddress.getLocalIpAddress()
#publicIp = weioIpAddress.getPublicIpAddress()
data['requested'] = rq['request']
data['status'] = config["dns_name"] + " on " + ip
# Send connection information to the client
self.broadcast(clients, json.dumps(data))
开发者ID:Capt-Cpt,项目名称:weio,代码行数:12,代码来源:dashboardHandler.py
示例16: get
def get(self):
global confFile
global firstTimeSwitch
confFile = weioConfig.getConfiguration()
firstTimeSwitch = confFile['first_time_run']
if (firstTimeSwitch=="YES") :
path = "www/firstTime.html"
else :
path = confFile['editor_html_path']
self.render(path, error="")
开发者ID:sethkontny,项目名称:weio,代码行数:12,代码来源:weioServer.py
示例17: play
def play(self, rq={'request':'play'}):
""" This is where all the magic happens.
"Play" button will spawn a new subprocess
which will execute users program written in the editor.
This subprocess will communicate with Tornado wia non-blocking pipes,
so that Tornado can simply transfer subprocess's `stdout` and `stderr`
to the client via WebSockets. """
# get configuration from file
config = weioConfig.getConfiguration()
# stop if process is already running
self.stop()
data = {}
lp = config["last_opened_project"]
# check if user project exists before launching
#if (weioFiles.checkIfFileExists(up+lp+"main.py")):
if (weioFiles.checkIfFileExists(lp+"/main.py")):
#print("weioMain indipendent process launching...")
# Inform client the we run subprocess
data['requested'] = rq['request']
data['status'] = "Warming up the engines..."
self.send(json.dumps(data))
consoleWelcome = {}
consoleWelcome['data'] = "WeIO user program started"
consoleWelcome['serverPush'] = "sysConsole"
self.lastLaunched = datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S")
consoleWelcome['data'] = 'WeIO user server launched ' + self.lastLaunched
if (weioIdeGlobals.CONSOLE != None):
#weioIdeGlobals.CONSOLE.send(json.dumps(data))
weioIdeGlobals.CONSOLE.send(json.dumps(consoleWelcome))
self.playing = True
# send *start* command to user tornado
self.weioPipe.stdin.write("*START*")
else : # FILE DON'T EXIST
warning = {}
warning['requested'] = rq['request']
warning['status'] = "main.py don't exist!"
warning['state'] = "error"
self.send(json.dumps(warning))
开发者ID:criptonauta,项目名称:weio,代码行数:50,代码来源:weioPlayer.py
示例18: get
def get(self):
confFile = weioConfig.getConfiguration()
firstTimeSwitch = confFile['first_time_run']
if (firstTimeSwitch=="YES") :
self.redirect("/signin")
return
if (confFile["login_required"] == "YES"):
if not self.current_user:
self.redirect("/login")
return
path = confFile['editor_html_path']
self.render(path, error="")
开发者ID:WRTIOT,项目名称:weio,代码行数:15,代码来源:weioServer.py
示例19: sendPlatformDetails
def sendPlatformDetails(self, rq):
# get configuration from file
config = weioConfig.getConfiguration()
data = {}
platformS = ""
platformS += "WeIO version " + config["weio_version"] + " with Python " + \
platform.python_version() + " on " + platform.system() + "<br>"
platformS += "GPL 3, Nodesign.net 2013 Uros Petrevski & Drasko Draskovic <br>"
data['serverPush'] = 'sysConsole'
data['data'] = platformS
self.broadcast(clients, json.dumps(data))
开发者ID:WRTIOT,项目名称:weio,代码行数:15,代码来源:editorHandler.py
示例20: checkVersion
def checkVersion(self, response):
print response.body
config = weioConfig.getConfiguration()
data = json.loads(response.body)
lastUpdate = data["recipe"]
# Read version form json file
# XXX it supposes that the distant version number is prefixed with 'v'
# The updater will break here if this prefix is removed in the future
distantVersion = float(lastUpdate["version"].split("v")[1])
# Check the current version
currentVersion = float(config["weio_version"])
print "current",currentVersion,"distant", distantVersion
rsp = {}
rsp['requested'] = "checkVersion"
rsp['localVersion'] = str(currentVersion)
rsp['distantVersion'] = str(distantVersion)
rsp['needsUpdate'] = "NO"
# version differs so we need an update
if (distantVersion > currentVersion):
print "Update is available"
# OK we have to update weio version
rsp['description'] = lastUpdate["title"]
rsp['whatsnew'] = lastUpdate["body"]
#rsp['install_duration'] = self.estimatedInstallTime
self.downloadUpdateLink = ""
# set all parameters for download, but DON'T download yet
# this is a just version check
self.updateFileName = self.fwPath + "updateRecipe"
rsp['needsUpdate'] = "YES"
print "setting parameters :"
self.fwDownloadLink = lastUpdate["download_url"]
print "download url", self.fwDownloadLink
self.fwDownloadSize = lastUpdate["size"]
print "file size", self.fwDownloadSize
self.fwDownloadMD5 = lastUpdate["md5"]
print "md5 checksum", self.fwDownloadSize
self.send(json.dumps(rsp))
开发者ID:badroum,项目名称:weio,代码行数:46,代码来源:updaterHandler.py
注:本文中的weioLib.weioConfig.getConfiguration函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论