C# Arduino.ArduinoSTKv2类代码示例

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C#中MissionPlanner.Arduino.ArduinoSTKv2类的典型用法代码示例。如果您正苦于以下问题：C# ArduinoSTKv2类的具体用法？C# ArduinoSTKv2怎么用？C# ArduinoSTKv2使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。

ArduinoSTKv2类属于MissionPlanner.Arduino命名空间，在下文中一共展示了ArduinoSTKv2类的9个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C#代码示例。

示例1: BUT_flashup_Click

        private void BUT_flashup_Click(object sender, EventArgs e)
        {
            byte[] FLASH = new byte[1];

            try
            {
                StreamReader sr = new StreamReader(Path.GetDirectoryName(Application.ExecutablePath) + Path.DirectorySeparatorChar + @"firmware.hex");
                FLASH = readIntelHEXv2(sr);
                sr.Close();

            }
            catch (Exception ex) { CustomMessageBox.Show("Failed to read firmware.hex : " + ex.Message); }
            IArduinoComms port = new ArduinoSTK();

            if (DialogResult.Yes == CustomMessageBox.Show("is this a 1280?", "", MessageBoxButtons.YesNo))
            {
                port = new ArduinoSTK();
                port.BaudRate = 57600;
            }
            else
            {
                port = new ArduinoSTKv2();
                port.BaudRate = 115200;
            }

            port.DataBits = 8;
            port.StopBits = StopBits.One;
            port.Parity = Parity.None;
            port.DtrEnable = true;

            try
            {
                port.PortName = MissionPlanner.MainV2.comPortName;

                port.Open();

                if (port.connectAP())
                {
                    log.Info("starting");

                    port.uploadflash(FLASH, 0, FLASH.Length, 0);

                    log.Info("Uploaded");

                }
                else
                {

                    CustomMessageBox.Show("Communication Error - no connection");
                }
                port.Close();

            }
            catch (Exception ex) {  CustomMessageBox.Show("Check port settings or Port in use? " + ex.ToString()); port.Close(); }
        }

开发者ID:RealTadango，项目名称:MissionPlanner，代码行数:55，代码来源:temp.cs

示例2: BUT_wipeeeprom_Click

        private void BUT_wipeeeprom_Click(object sender, EventArgs e)
        {
            byte[] EEPROM = new byte[4*1024];

            for (int i = 0; i < EEPROM.Length;i++)
            {
                EEPROM[i] = 0xff;
            }

            IArduinoComms port = new ArduinoSTK();

            if (DialogResult.Yes == CustomMessageBox.Show("is this a 1280?", "", MessageBoxButtons.YesNo))
            {
                port = new ArduinoSTK();
                port.BaudRate = 57600;
            }
            else
            {
                port = new ArduinoSTKv2();
                port.BaudRate = 115200;
            }
            port.DataBits = 8;
            port.StopBits = StopBits.One;
            port.Parity = Parity.None;
            port.DtrEnable = true;

            port.PortName = MissionPlanner.MainV2.comPortName;
            try
            {
                port.Open();

                if (port.connectAP())
                {
                    // waypoints
                    int start = 0;
                    int end = 1024*4;

                        log.Info(start + " to " + end);
                        port.upload(EEPROM, (short)start, (short)(end - start), (short)start);

                        if (port.keepalive())
                        {
                            // Config

                            if (port.keepalive())
                            {
                                System.Threading.Thread.Sleep(2000);
                                //MessageBox.Show("Upload Completed");
                            }
                            else
                            {
                                CustomMessageBox.Show("Communication Error - WPs wrote but no config");
                            }
                        }
                        else
                        {
                            CustomMessageBox.Show("Communication Error - Bad data");
                        }
                }
                else
                {
                    CustomMessageBox.Show("Communication Error - no connection");
                }
                port.Close();
            }
            catch (Exception ex) { CustomMessageBox.Show("Port in use? " + ex.ToString()); port.Close(); }
        }

开发者ID:RealTadango，项目名称:MissionPlanner，代码行数:67，代码来源:temp.cs

示例3: BUT_dleeprom_Click

        private void BUT_dleeprom_Click(object sender, EventArgs e)
        {
            IArduinoComms port = new ArduinoSTK();

            if (DialogResult.Yes == CustomMessageBox.Show("is this a 1280?", "", MessageBoxButtons.YesNo))
            {
                port = new ArduinoSTK();
                port.BaudRate = 57600;
            }
            else
            {
                port = new ArduinoSTKv2();
                port.BaudRate = 115200;
            }
            port.DataBits = 8;
            port.StopBits = StopBits.One;
            port.Parity = Parity.None;
            port.DtrEnable = true;

            try
            {
                port.PortName = MissionPlanner.MainV2.comPortName;

                log.Info("Open Port");
                port.Open();
                log.Info("Connect AP");
                if (port.connectAP())
                {
                    log.Info("Download AP");
                    byte[] EEPROM = new byte[1024*4];

                    for (int a = 0; a < 4 * 1024; a += 0x100)
                    {
                        port.setaddress(a);
                        port.download(0x100).CopyTo(EEPROM,a);
                    }
                    log.Info("Verify State");
                    if (port.keepalive())
                    {
                        StreamWriter sw = new StreamWriter(Path.GetDirectoryName(Application.ExecutablePath) + Path.DirectorySeparatorChar + @"EEPROM.bin");
                        BinaryWriter bw = new BinaryWriter(sw.BaseStream);
                        bw.Write(EEPROM, 0, 1024 * 4);
                        bw.Close();

                    }
                    else
                    {
                        CustomMessageBox.Show("Communication Error - Bad data");
                    }
                }
                else
                {
                    CustomMessageBox.Show("Communication Error - no connection");
                }
                port.Close();
            }
            catch (Exception ex) { CustomMessageBox.Show("Port Error? " + ex.ToString()); if (port != null && port.IsOpen) { port.Close(); } }
        }

开发者ID:RealTadango，项目名称:MissionPlanner，代码行数:58，代码来源:temp.cs

示例4: BUT_flashdl_Click

        private void BUT_flashdl_Click(object sender, EventArgs e)
        {
            byte[] FLASH = new byte[256 * 1024];

            IArduinoComms port = new ArduinoSTK();

            if (DialogResult.Yes == CustomMessageBox.Show("is this a 1280?", "", MessageBoxButtons.YesNo))
            {
                port = new ArduinoSTK();
                port.BaudRate = 57600;
            }
            else
            {
                port = new ArduinoSTKv2();
                port.BaudRate = 115200;
            }
            port.DataBits = 8;
            port.StopBits = StopBits.One;
            port.Parity = Parity.None;
            port.DtrEnable = true;

            port.PortName = MissionPlanner.MainV2.comPortName;
            try
            {
                port.Open();

                System.Threading.Thread.Sleep(100);

                if (port.connectAP())
                {
                    // waypoints
                    int start = 0;
                    short length = 0x100;

                    log.Info(start + " to " + FLASH.Length);

                    while (start < FLASH.Length)
                    {
                        log.Info("Doing " + length + " at " + start);
                        port.setaddress(start);
                        port.downloadflash(length).CopyTo(FLASH, start);
                        start += length;
                    }

                    StreamWriter sw = new StreamWriter(Path.GetDirectoryName(Application.ExecutablePath) + Path.DirectorySeparatorChar + @"flash.bin", false);
                    BinaryWriter bw = new BinaryWriter(sw.BaseStream);
                    bw.Write(FLASH, 0, FLASH.Length);
                    bw.Close();

                    sw = new StreamWriter(Path.GetDirectoryName(Application.ExecutablePath) + Path.DirectorySeparatorChar + @"flash.hex", false);
                    for (int i = 0; i < FLASH.Length; i += 16)
                    {
                        string add = string.Format("{0:X4}", i);
                        if (i % (0x1000 << 4) == 0)
                        {
                            if (i != 0)
                                sw.WriteLine(":02000002{0:X4}{1:X2}", ((i >> 4) & 0xf000), 0x100 - (2 + 2 + (((i >> 4) & 0xf000) >> 8) & 0xff));
                        }
                        if (add.Length == 5)
                        {
                            add = add.Substring(1);
                        }
                        sw.Write(":{0:X2}{1}00", 16, add);
                        byte ck = (byte)(16 + (i & 0xff) + ((i >> 8) & 0xff));
                        for (int a = 0; a < 16; a++)
                        {
                            ck += FLASH[i + a];
                            sw.Write("{0:X2}", FLASH[i + a]);
                        }
                        sw.WriteLine("{0:X2}", (byte)(0x100 - ck));
                    }

                    sw.Close();

                    log.Info("Downloaded");
                }
                else
                {
                    CustomMessageBox.Show("Communication Error - no connection");
                }
                port.Close();
            }
            catch (Exception ex) { CustomMessageBox.Show("Port in use? " + ex.ToString()); port.Close(); }
        }

开发者ID:RealTadango，项目名称:MissionPlanner，代码行数:84，代码来源:temp.cs

示例5: BUT_copy2560_Click

        private void BUT_copy2560_Click(object sender, EventArgs e)
        {
            ArduinoSTKv2 port = new ArduinoSTKv2();
            port.BaudRate = 115200;
            port.DataBits = 8;
            port.StopBits = StopBits.One;
            port.Parity = Parity.None;
            port.DtrEnable = true;

            try
            {
                port.PortName = MissionPlanner.MainV2.comPortName;

                log.Info("Open Port");
                port.Open();
                log.Info("Connect AP");
                if (port.connectAP())
                {
                    log.Info("Download AP");
                    byte[] EEPROM = new byte[1024 * 4];

                    for (int a = 0; a < EEPROM.Length; a += 0x100)
                    {
                        port.setaddress(a);
                        port.download(0x100).CopyTo(EEPROM, a);
                    }
                    log.Info("Verify State");
                    if (port.keepalive())
                    {
                        StreamWriter sw = new StreamWriter(Path.GetDirectoryName(Application.ExecutablePath) + Path.DirectorySeparatorChar + @"EEPROM2560.bin");
                        BinaryWriter bw = new BinaryWriter(sw.BaseStream);
                        bw.Write(EEPROM, 0, EEPROM.Length);
                        bw.Close();

                        log.Info("Download AP");
                        byte[] FLASH = new byte[1024 * 256];

                        for (int a = 0; a < FLASH.Length; a += 0x100)
                        {
                            port.setaddress(a);
                            port.downloadflash(0x100).CopyTo(FLASH, a);
                        }

                        sw = new StreamWriter(Path.GetDirectoryName(Application.ExecutablePath) + Path.DirectorySeparatorChar + @"FLASH2560.bin");
                        bw = new BinaryWriter(sw.BaseStream);
                        bw.Write(FLASH, 0, FLASH.Length);
                        bw.Close();

                    }
                    else
                    {
                        CustomMessageBox.Show("Communication Error - Bad data");
                    }
                }
                else
                {
                    CustomMessageBox.Show("Communication Error - no connection");
                }
                port.Close();
            }
            catch (Exception ex) { CustomMessageBox.Show("Port Error? " + ex.ToString()); if (port != null && port.IsOpen) { port.Close(); } }
        }

开发者ID:RealTadango，项目名称:MissionPlanner，代码行数:62，代码来源:temp.cs

示例6: button1_Click

        private void button1_Click(object sender, EventArgs e)
        {
            OpenFileDialog openFileDialog1 = new OpenFileDialog();
            openFileDialog1.Filter = "EEPROM.bin|*.bin";
            openFileDialog1.FilterIndex = 2;
            openFileDialog1.RestoreDirectory = true;
            openFileDialog1.InitialDirectory = Path.GetDirectoryName(Application.ExecutablePath);

            if (openFileDialog1.ShowDialog() == DialogResult.OK)
            {
                try
                {
                    StreamReader sr = new StreamReader(openFileDialog1.FileName);
                    BinaryReader br = new BinaryReader(sr.BaseStream);
                    byte[] EEPROM = br.ReadBytes(1024 * 4);
                    br.Close();
                    sr.Close();

                    IArduinoComms port = new ArduinoSTK();

                    if (DialogResult.Yes == CustomMessageBox.Show("is this a 1280?", "", MessageBoxButtons.YesNo))
                    {
                        port = new ArduinoSTK();
                        port.BaudRate = 57600;
                    }
                    else
                    {
                        port = new ArduinoSTKv2();
                        port.BaudRate = 115200;
                    }

            port.DataBits = 8;
            port.StopBits = StopBits.One;
            port.Parity = Parity.None;
            port.DtrEnable = true;

            port.PortName = MissionPlanner.MainV2.comPortName;
            try
            {
                port.Open();

                if (port.connectAP())
                {
                    // waypoints
                    int start = 0;
                    int end = 1024*4;

                        log.Info(start + " to " + end);
                        port.upload(EEPROM, (short)start, (short)(end - start), (short)start);

                        if (port.keepalive())
                        {
                            // Config

                            if (port.keepalive())
                            {
                                System.Threading.Thread.Sleep(2000);
                                //MessageBox.Show("Upload Completed");
                            }
                            else
                            {
                                CustomMessageBox.Show("Communication Error - WPs wrote but no config");
                            }
                        }
                        else
                        {
                            CustomMessageBox.Show("Communication Error - Bad data");
                        }
                }
                else
                {
                    CustomMessageBox.Show("Communication Error - no connection");
                }
                port.Close();
            }
            catch (Exception ex) { CustomMessageBox.Show("Port in use? " + ex.ToString()); port.Close(); }
                }
                catch (Exception) { CustomMessageBox.Show("Error reading file"); }
            }
        }

开发者ID:RealTadango，项目名称:MissionPlanner，代码行数:80，代码来源:temp.cs

示例7: UploadFlash

        /// <summary>
        /// upload to arduino standalone
        /// </summary>
        /// <param name="filename"></param>
        /// <param name="board"></param>
        public bool UploadFlash(string comport, string filename, BoardDetect.boards board)
        {
            if (board == BoardDetect.boards.px4 || board == BoardDetect.boards.px4v2 || board == BoardDetect.boards.px4v4)
            {
                try
                {
                    return UploadPX4(filename, board);
                }
                catch (MissingFieldException)
                {
                    CustomMessageBox.Show("Please update, your install is currupt", Strings.ERROR);
                    return false;
                }
            }

            if (board == BoardDetect.boards.vrbrainv40 || board == BoardDetect.boards.vrbrainv45 ||
                board == BoardDetect.boards.vrbrainv50 || board == BoardDetect.boards.vrbrainv51 ||
                board == BoardDetect.boards.vrbrainv52 || board == BoardDetect.boards.vrcorev10 ||
                board == BoardDetect.boards.vrubrainv51 || board == BoardDetect.boards.vrubrainv52)
            {
                return UploadVRBRAIN(filename, board);
            }

            byte[] FLASH = new byte[1];
            try
            {
                updateProgress(0, Strings.ReadingHexFile);
                using (StreamReader sr = new StreamReader(filename))
                {
                    FLASH = readIntelHEXv2(sr);
                }
                log.InfoFormat("\n\nSize: {0}\n\n", FLASH.Length);
            }
            catch (Exception ex)
            {
                updateProgress(0, Strings.FailedReadHEX);
                CustomMessageBox.Show(Strings.FailedToReadHex + ex.Message);
                return false;
            }
            IArduinoComms port = new ArduinoSTK();

            if (board == BoardDetect.boards.b1280)
            {
                if (FLASH.Length > 126976)
                {
                    CustomMessageBox.Show("Firmware is to big for a 1280, Please upgrade your hardware!!");
                    return false;
                }
                //port = new ArduinoSTK();
                port.BaudRate = 57600;
            }
            else if (board == BoardDetect.boards.b2560 || board == BoardDetect.boards.b2560v2)
            {
                port = new ArduinoSTKv2
                {
                    BaudRate = 115200
                };
            }
            port.DataBits = 8;
            port.StopBits = System.IO.Ports.StopBits.One;
            port.Parity = System.IO.Ports.Parity.None;
            port.DtrEnable = true;

            try
            {
                port.PortName = comport;

                port.Open();

                if (port.connectAP())
                {
                    log.Info("starting");
                    updateProgress(0, String.Format(Strings.UploadingBytesToBoard, FLASH.Length) + board);

                    // this is enough to make ap_var reset
                    //port.upload(new byte[256], 0, 2, 0);

                    port.Progress += updateProgress;

                    if (!port.uploadflash(FLASH, 0, FLASH.Length, 0))
                    {
                        if (port.IsOpen)
                            port.Close();
                        throw new Exception("Upload failed. Lost sync. Try Arduino!!");
                    }

                    port.Progress -= updateProgress;

                    updateProgress(100, Strings.UploadComplete);

                    log.Info("Uploaded");

                    int start = 0;
                    short length = 0x100;

//.........这里部分代码省略.........

开发者ID:jmachuca77，项目名称:MissionPlanner，代码行数:101，代码来源:Firmware.cs

示例8: decodeApVar

        /// <summary>
        /// return the software id from eeprom
        /// </summary>
        /// <param name="comport">Port</param>
        /// <param name="version">Board type</param>
        /// <returns></returns>
        public static int decodeApVar(string comport, BoardDetect.boards version)
        {
            IArduinoComms port = new ArduinoSTK();
            if (version == boards.b1280)
            {
                port = new ArduinoSTK();
                port.BaudRate = 57600;
            }
            else if (version == boards.b2560 || version == boards.b2560v2)
            {
                port = new ArduinoSTKv2();
                port.BaudRate = 115200;
            }
            else { return -1; }
            port.PortName = comport;
            port.DtrEnable = true;
            port.Open();
            port.connectAP();
            byte[] buffer = port.download(1024 * 4);
            port.Close();

            if (buffer[0] != 'A' && buffer[0] != 'P' || buffer[1] != 'P' && buffer[1] != 'A') // this is the apvar header
            {
                return -1;
            }
            else
            {
                if (buffer[0] == 'A' && buffer[1] == 'P' && buffer[2] == 2)
                { // apvar header and version
                    int pos = 4;
                    byte key = 0;
                    while (pos < (1024 * 4))
                    {
                        int size = buffer[pos] & 63;
                        pos++;
                        key = buffer[pos];
                        pos++;

                        log.InfoFormat("{0:X4}: key {1} size {2}\n ", pos - 2, key, size + 1);

                        if (key == 0xff)
                        {
                            log.InfoFormat("end sentinal at {0}", pos - 2);
                            break;
                        }

                        if (key == 0)
                        {
                            //Array.Reverse(buffer, pos, 2);
                            return BitConverter.ToUInt16(buffer, pos);
                        }

                        for (int i = 0; i <= size; i++)
                        {
                            Console.Write(" {0:X2}", buffer[pos]);
                            pos++;
                        }
                    }
                }

                if (buffer[0] == 'P' && buffer[1] == 'A' && buffer[2] == 5) // ap param
                {
                    int pos = 4;
                    byte key = 0;
                    while (pos < (1024 * 4))
                    {
                        key = buffer[pos];
                        pos++;
                        int group = buffer[pos];
                        pos++;
                        int type = buffer[pos];
                        pos++;

                        int size = type_size((ap_var_type)Enum.Parse(typeof(ap_var_type), type.ToString()));

                        Console.Write("{0:X4}: type {1} ({2}) key {3} group {4} size {5}\n ", pos - 2, type, type_names[type], key, group, size);

                        if (key == 0xff)
                        {
                            log.InfoFormat("end sentinal at {0}", pos - 2);
                            break;
                        }

                        if (key == 0)
                        {
                            //Array.Reverse(buffer, pos, 2);
                            return BitConverter.ToUInt16(buffer, pos);
                        }

                        for (int i = 0; i < size; i++)
                        {
                            Console.Write(" {0:X2}", buffer[pos]);
                            pos++;
                        }
//.........这里部分代码省略.........

开发者ID:LeoTosti，项目名称:x-drone，代码行数:101，代码来源:BoardDetect.cs

示例9: UploadFlash

        /// <summary>
        /// upload to arduino standalone
        /// </summary>
        /// <param name="filename"></param>
        /// <param name="board"></param>
        public bool UploadFlash(string comport, string filename, BoardDetect.boards board)
        {
            if (board == BoardDetect.boards.px4|| board == BoardDetect.boards.px4v2)
            {
                return UploadPX4(filename);
            }

            byte[] FLASH = new byte[1];
            StreamReader sr = null;
            try
            {
                updateProgress(0, "Reading Hex File");
                sr = new StreamReader(filename);
                FLASH = readIntelHEXv2(sr);
                sr.Close();
                log.InfoFormat("\n\nSize: {0}\n\n", FLASH.Length);
            }
            catch (Exception ex)
            {
                if (sr != null)
                {
                    sr.Dispose();
                }
                updateProgress(0, "Failed read HEX");
                CustomMessageBox.Show("Failed to read firmware.hex : " + ex.Message);
                return false;
            }
            IArduinoComms port = new ArduinoSTK();

            if (board == BoardDetect.boards.b1280)
            {
                if (FLASH.Length > 126976)
                {
                    CustomMessageBox.Show("Firmware is to big for a 1280, Please upgrade your hardware!!");
                    return false;
                }
                //port = new ArduinoSTK();
                port.BaudRate = 57600;
            }
            else if (board == BoardDetect.boards.b2560 || board == BoardDetect.boards.b2560v2)
            {
                port = new ArduinoSTKv2
                {
                    BaudRate = 115200
                };
            }
            port.DataBits = 8;
            port.StopBits = System.IO.Ports.StopBits.One;
            port.Parity = System.IO.Ports.Parity.None;
            port.DtrEnable = true;

            try
            {
                port.PortName = comport;

                port.Open();

                if (port.connectAP())
                {
                    log.Info("starting");
                    updateProgress(0, "Uploading " + FLASH.Length + " bytes to Board: " + board);

                    // this is enough to make ap_var reset
                    //port.upload(new byte[256], 0, 2, 0);

                    port.Progress += updateProgress;

                    if (!port.uploadflash(FLASH, 0, FLASH.Length, 0))
                    {
                        if (port.IsOpen)
                            port.Close();
                        throw new Exception("Upload failed. Lost sync. Try Arduino!!");
                    }

                    port.Progress -= updateProgress;

                    updateProgress(100, "Upload Complete");

                    log.Info("Uploaded");

                    int start = 0;
                    short length = 0x100;

                    byte[] flashverify = new byte[FLASH.Length + 256];

                    updateProgress(0, "Verify Firmware");

                    while (start < FLASH.Length)
                    {
                        updateProgress((int)((start / (float)FLASH.Length) * 100), "Verify Firmware");
                        port.setaddress(start);
                        log.Info("Downloading " + length + " at " + start);
                        port.downloadflash(length).CopyTo(flashverify, start);
                        start += length;
                    }
//.........这里部分代码省略.........

开发者ID:RealTadango，项目名称:MissionPlanner，代码行数:101，代码来源:Firmware.cs

注：本文中的MissionPlanner.Arduino.ArduinoSTKv2类示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C# Comms.SerialPort类代码示例发布时间：2022-05-26

C# Arduino.ArduinoSTK类代码示例发布时间：2022-05-26

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18277|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9677|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8179|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8549|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8457|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9393|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8430|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7865|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8416|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C# Arduino.ArduinoSTKv2类代码示例

示例1: BUT_flashup_Click

示例2: BUT_wipeeeprom_Click

示例3: BUT_dleeprom_Click

示例4: BUT_flashdl_Click

示例5: BUT_copy2560_Click

示例6: button1_Click

示例7: UploadFlash

示例8: decodeApVar

示例9: UploadFlash

请发表评论

全部评论

上一篇：

下一篇：

librespeed/speedtest: Self-hosted Speedt

CVE-2022-2415

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

右的笔顺,诠释右的笔画,关于右的部首

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053