本文整理汇总了Python中wlantest.Wlantest类的典型用法代码示例。如果您正苦于以下问题：Python Wlantest类的具体用法？Python Wlantest怎么用？Python Wlantest使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。
在下文中一共展示了Wlantest类的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Python代码示例。
示例1: check_group_mgmt_cipher
def check_group_mgmt_cipher(dev, ap, cipher, sta_req_cipher=None):
if cipher not in dev.get_capability("group_mgmt"):
raise HwsimSkip("Cipher %s not supported" % cipher)
params = { "ssid": "test-wpa2-psk-pmf",
"wpa_passphrase": "12345678",
"wpa": "2",
"ieee80211w": "2",
"wpa_key_mgmt": "WPA-PSK-SHA256",
"rsn_pairwise": "CCMP",
"group_mgmt_cipher": cipher }
hapd = hostapd.add_ap(ap, params)
Wlantest.setup(hapd)
wt = Wlantest()
wt.flush()
wt.add_passphrase("12345678")
dev.connect("test-wpa2-psk-pmf", psk="12345678", ieee80211w="2",
key_mgmt="WPA-PSK-SHA256", group_mgmt=sta_req_cipher,
pairwise="CCMP", group="CCMP", scan_freq="2412")
hwsim_utils.test_connectivity(dev, hapd)
hapd.request("DEAUTHENTICATE ff:ff:ff:ff:ff:ff")
dev.wait_disconnected()
if wt.get_bss_counter('valid_bip_mmie', ap['bssid']) < 1:
raise Exception("No valid BIP MMIE seen")
if wt.get_bss_counter('bip_deauth', ap['bssid']) < 1:
raise Exception("No valid BIP deauth seen")
if cipher == "AES-128-CMAC":
group_mgmt = "BIP"
else:
group_mgmt = cipher
res = wt.info_bss('group_mgmt', ap['bssid']).strip()
if res != group_mgmt:
raise Exception("Unexpected group mgmt cipher: " + res)
开发者ID:janetuk，项目名称:mech_eap，代码行数:35，代码来源:test_ap_ciphers.py
示例2: wlantest_tdls_packet_counters
def wlantest_tdls_packet_counters(bssid, addr0, addr1):
wt = Wlantest()
dl = wt.get_tdls_counter("valid_direct_link", bssid, addr0, addr1)
inv_dl = wt.get_tdls_counter("invalid_direct_link", bssid, addr0, addr1)
ap = wt.get_tdls_counter("valid_ap_path", bssid, addr0, addr1)
inv_ap = wt.get_tdls_counter("invalid_ap_path", bssid, addr0, addr1)
return [dl,inv_dl,ap,inv_ap]
开发者ID:gxk，项目名称:hostap，代码行数:7，代码来源:test_ap_tdls.py
示例3: teardown_tdls
def teardown_tdls(sta0, sta1, bssid):
logger.info("Teardown TDLS")
addr0 = sta0.p2p_interface_addr()
addr1 = sta1.p2p_interface_addr()
sta0.tdls_teardown(addr1)
time.sleep(1)
wt = Wlantest()
teardown = wt.get_tdls_counter("teardown", bssid, addr0, addr1);
if teardown == 0:
raise Exception("No TDLS Setup Teardown seen")
tdls_check_ap(sta0, sta1, bssid, addr0, addr1)
开发者ID:arend，项目名称:hostap，代码行数:11，代码来源:test_ap_tdls.py
示例4: tdls_check_ap
def tdls_check_ap(sta0, sta1, bssid, addr0, addr1):
wt = Wlantest()
wt.tdls_clear(bssid, addr0, addr1)
hwsim_utils.test_connectivity_sta(sta0, sta1)
[dl,inv_dl,ap,inv_ap] = wlantest_tdls_packet_counters(bssid, addr0, addr1)
if dl > 0:
raise Exception("Unexpected frames through direct link")
if inv_dl > 0:
raise Exception("Invalid frames through direct link")
if ap == 0:
raise Exception("No valid frames through AP path")
if inv_ap > 0:
raise Exception("Invalid frames through AP path")
开发者ID:gxk，项目名称:hostap，代码行数:13，代码来源:test_ap_tdls.py
示例5: test_ocv_sa_query_csa
def test_ocv_sa_query_csa(dev, apdev):
"""Test SA Query with OCV after channel switch"""
ssid = "test-pmf-required"
params = hostapd.wpa2_params(ssid=ssid, passphrase="12345678")
params["wpa_key_mgmt"] = "WPA-PSK-SHA256"
params["ieee80211w"] = "2"
params["ocv"] = "1"
try:
hapd = hostapd.add_ap(apdev[0], params)
except Exception as e:
if "Failed to set hostapd parameter ocv" in str(e):
raise HwsimSkip("OCV not supported")
raise
Wlantest.setup(hapd)
wt = Wlantest()
wt.flush()
wt.add_passphrase("12345678")
dev[0].connect(ssid, psk="12345678", ieee80211w="1", ocv="1",
key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
scan_freq="2412")
hapd.request("CHAN_SWITCH 5 2437")
time.sleep(1)
if wt.get_sta_counter("valid_saqueryreq_tx", apdev[0]['bssid'],
dev[0].own_addr()) < 1:
raise Exception("STA did not start SA Query after channel switch")
开发者ID:greearb，项目名称:hostap-ct，代码行数:26，代码来源:test_ap_pmf.py
示例6: test_ap_qosmap_default
def test_ap_qosmap_default(dev, apdev):
"""QoS mapping with default values"""
ssid = "test-qosmap-default"
params = { "ssid": ssid }
hapd = hostapd.add_ap(apdev[0], params)
dev[0].connect(ssid, key_mgmt="NONE", scan_freq="2412")
addr = dev[0].p2p_interface_addr()
dev[0].request("DATA_TEST_CONFIG 1")
hapd.request("DATA_TEST_CONFIG 1")
Wlantest.setup(hapd)
for dscp in [ 0, 7, 8, 15, 16, 23, 24, 31, 32, 39, 40, 47, 48, 55, 56, 63]:
check_qos_map(apdev[0], hapd, dev[0], addr, dscp, dscp >> 3)
dev[0].request("DATA_TEST_CONFIG 0")
hapd.request("DATA_TEST_CONFIG 0")
开发者ID:gxk，项目名称:hostap，代码行数:14，代码来源:test_ap_qosmap.py
示例7: test_ocv_sa_query
def test_ocv_sa_query(dev, apdev):
"""Test SA Query with OCV"""
ssid = "test-pmf-required"
params = hostapd.wpa2_params(ssid=ssid, passphrase="12345678")
params["wpa_key_mgmt"] = "WPA-PSK-SHA256"
params["ieee80211w"] = "2"
params["ocv"] = "1"
try:
hapd = hostapd.add_ap(apdev[0], params)
except Exception as e:
if "Failed to set hostapd parameter ocv" in str(e):
raise HwsimSkip("OCV not supported")
raise
Wlantest.setup(hapd)
wt = Wlantest()
wt.flush()
wt.add_passphrase("12345678")
dev[0].connect(ssid, psk="12345678", ieee80211w="1", ocv="1",
key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
scan_freq="2412")
# Test that client can handle SA Query with OCI element
if "OK" not in hapd.request("SA_QUERY " + dev[0].own_addr()):
raise Exception("SA_QUERY failed")
time.sleep(0.1)
if wt.get_sta_counter("valid_saqueryresp_tx", apdev[0]['bssid'],
dev[0].own_addr()) < 1:
raise Exception("STA did not reply to SA Query")
# Test that AP can handle SA Query with OCI element
if "OK" not in dev[0].request("UNPROT_DEAUTH"):
raise Exception("Triggering SA Query from the STA failed")
ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=3)
if ev is not None:
raise Exception("SA Query from the STA failed")
开发者ID:greearb，项目名称:hostap-ct，代码行数:35，代码来源:test_ap_pmf.py
示例8: check_qos_map
def check_qos_map(ap, dev, dscp, tid, ap_tid=None):
if not ap_tid:
ap_tid = tid
bssid = ap['bssid']
sta = dev.p2p_interface_addr()
wt = Wlantest()
wt.clear_sta_counters(bssid, sta)
hwsim_utils.test_connectivity(dev.ifname, ap['ifname'], dscp=dscp)
[ tx, rx ] = wt.get_tid_counters(bssid, sta)
if tx[tid] == 0:
logger.info("Expected TX DSCP " + str(dscp) + " with TID " + str(tid) + " but counters: " + str(tx))
raise Exception("No STA->AP data frame using the expected TID")
if rx[ap_tid] == 0:
logger.info("Expected RX DSCP " + str(dscp) + " with TID " + str(ap_tid) + " but counters: " + str(rx))
raise Exception("No AP->STA data frame using the expected TID")
开发者ID:jmalinen，项目名称:hostap，代码行数:15，代码来源:test_ap_qosmap.py
示例9: test_ap_pmf_sta_unprot_deauth_burst
def test_ap_pmf_sta_unprot_deauth_burst(dev, apdev):
"""WPA2-PSK AP with station receiving burst of unprotected Deauthentication frames"""
ssid = "deauth-attack"
addr = dev[0].p2p_dev_addr()
wt = Wlantest()
wt.flush()
wt.add_passphrase("12345678")
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
wpas.interface_add("wlan5", drv_params="use_monitor=1")
id = wpas.add_network()
wpas.set_network(id, "mode", "2")
wpas.set_network_quoted(id, "ssid", ssid)
wpas.set_network(id, "proto", "WPA2")
wpas.set_network(id, "key_mgmt", "WPA-PSK-SHA256")
wpas.set_network(id, "ieee80211w", "2")
wpas.set_network_quoted(id, "psk", "12345678")
wpas.set_network(id, "pairwise", "CCMP")
wpas.set_network(id, "group", "CCMP")
wpas.set_network(id, "frequency", "2412")
wpas.connect_network(id)
bssid = wpas.p2p_dev_addr()
dev[0].connect(ssid, psk="12345678", ieee80211w="1",
key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
scan_freq="2412")
for i in range(0, 10):
wpas.request("DEAUTHENTICATE " + addr + " reason=6 test=0")
wpas.request("DISASSOCIATE " + addr + " reason=7 test=0")
ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=1)
if ev is not None:
raise Exception("Unexpected disconnection")
num_req = wt.get_sta_counter("valid_saqueryreq_tx", bssid, addr)
num_resp = wt.get_sta_counter("valid_saqueryresp_rx", bssid, addr)
if num_req < 1:
raise Exception("STA did not send SA Query")
if num_resp < 1:
raise Exception("AP did not reply to SA Query")
if num_req > 1:
raise Exception("STA initiated too many SA Query procedures (%d)" % num_req)
time.sleep(10)
for i in range(0, 5):
wpas.request("DEAUTHENTICATE " + addr + " reason=6 test=0")
wpas.request("DISASSOCIATE " + addr + " reason=7 test=0")
ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=1)
if ev is not None:
raise Exception("Unexpected disconnection")
num_req = wt.get_sta_counter("valid_saqueryreq_tx", bssid, addr)
num_resp = wt.get_sta_counter("valid_saqueryresp_rx", bssid, addr)
if num_req != 2 or num_resp != 2:
raise Exception("Unexpected number of SA Query procedures (req=%d resp=%d)" % (num_req, num_resp))
开发者ID:aelarabawy，项目名称:hostap，代码行数:53，代码来源:test_ap_pmf.py
示例10: teardown_tdls
def teardown_tdls(sta0, sta1, ap, responder=False):
logger.info("Teardown TDLS")
check_connectivity(sta0, sta1, ap)
bssid = ap['bssid']
addr0 = sta0.p2p_interface_addr()
addr1 = sta1.p2p_interface_addr()
if responder:
sta1.tdls_teardown(addr0)
else:
sta0.tdls_teardown(addr1)
time.sleep(1)
wt = Wlantest()
teardown = wt.get_tdls_counter("teardown", bssid, addr0, addr1);
if teardown == 0:
raise Exception("No TDLS Setup Teardown seen")
tdls_check_ap(sta0, sta1, bssid, addr0, addr1)
check_connectivity(sta0, sta1, ap)
开发者ID:jku，项目名称:hostap，代码行数:17，代码来源:test_ap_tdls.py
示例11: test_ap_wpa2_delayed_m1_m3_zero_tk
def test_ap_wpa2_delayed_m1_m3_zero_tk(dev, apdev):
"""Delayed M1+M3 retransmission and zero TK"""
params = hostapd.wpa2_params(ssid="test-wpa2-psk", passphrase="12345678")
hapd = hostapd.add_ap(apdev[0], params)
Wlantest.setup(hapd)
wt = Wlantest()
wt.flush()
wt.add_passphrase("12345678")
dev[0].connect("test-wpa2-psk", psk="12345678", scan_freq="2412")
hwsim_utils.test_connectivity(dev[0], hapd)
addr = dev[0].own_addr()
if "OK" not in hapd.request("RESEND_M1 " + addr + " change-anonce"):
raise Exception("RESEND_M1 failed")
if "OK" not in hapd.request("RESEND_M1 " + addr):
raise Exception("RESEND_M1 failed")
if "OK" not in hapd.request("RESEND_M3 " + addr):
raise Exception("RESEND_M3 failed")
if "OK" not in hapd.request("SET_KEY 3 %s %d %d %s %s" % (addr, 0, 1, 6*"00", 16*"00")):
raise Exception("SET_KEY failed")
time.sleep(0.1)
hwsim_utils.test_connectivity(dev[0], hapd, timeout=1, broadcast=False,
success_expected=False)
dev[0].request("DISCONNECT")
dev[0].wait_disconnected()
开发者ID:janetuk，项目名称:mech_eap，代码行数:28，代码来源:test_ap_ciphers.py
示例12: test_peerkey_pairwise_mismatch
def test_peerkey_pairwise_mismatch(dev, apdev):
"""RSN TKIP+CCMP AP and PeerKey between two STAs using different ciphers"""
skip_with_fips(dev[0])
ssid = "test-peerkey"
passphrase = "12345678"
params = hostapd.wpa2_params(ssid=ssid, passphrase=passphrase)
params['peerkey'] = "1"
params['rsn_pairwise'] = "TKIP CCMP"
hapd = hostapd.add_ap(apdev[0], params)
Wlantest.setup(hapd)
wt = Wlantest()
wt.flush()
wt.add_passphrase("12345678")
dev[0].connect(ssid, psk=passphrase, scan_freq="2412", peerkey=True,
pairwise="CCMP")
dev[1].connect(ssid, psk=passphrase, scan_freq="2412", peerkey=True,
pairwise="TKIP")
hwsim_utils.test_connectivity_sta(dev[0], dev[1])
dev[0].request("STKSTART " + dev[1].p2p_interface_addr())
time.sleep(0.5)
dev[1].request("STKSTART " + dev[0].p2p_interface_addr())
time.sleep(0.5)
开发者ID:cococorp，项目名称:hostap-upstream，代码行数:25，代码来源:test_peerkey.py
示例13: test_ap_pmf_required_sha1
def test_ap_pmf_required_sha1(dev, apdev):
"""WPA2-PSK AP with PMF required with SHA1 AKM"""
ssid = "test-pmf-required-sha1"
wt = Wlantest()
wt.flush()
wt.add_passphrase("12345678")
params = hostapd.wpa2_params(ssid=ssid, passphrase="12345678")
params["wpa_key_mgmt"] = "WPA-PSK";
params["ieee80211w"] = "2";
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
key_mgmt = hapd.get_config()['key_mgmt']
if key_mgmt.split(' ')[0] != "WPA-PSK":
raise Exception("Unexpected GET_CONFIG(key_mgmt): " + key_mgmt)
dev[0].connect(ssid, psk="12345678", ieee80211w="2",
key_mgmt="WPA-PSK", proto="WPA2", scan_freq="2412")
if "[WPA2-PSK-CCMP]" not in dev[0].request("SCAN_RESULTS"):
raise Exception("Scan results missing RSN element info")
hwsim_utils.test_connectivity(dev[0], hapd)
开发者ID:aelarabawy，项目名称:hostap，代码行数:18，代码来源:test_ap_pmf.py
示例14: test_wnm_sleep_mode_rsn_pmf
def test_wnm_sleep_mode_rsn_pmf(dev, apdev):
"""WNM Sleep Mode - RSN with PMF"""
wt = Wlantest()
wt.flush()
wt.add_passphrase("12345678")
params = hostapd.wpa2_params("test-wnm-rsn", "12345678")
params["wpa_key_mgmt"] = "WPA-PSK-SHA256";
params["ieee80211w"] = "2";
params["time_advertisement"] = "2"
params["time_zone"] = "EST5"
params["wnm_sleep_mode"] = "1"
params["bss_transition"] = "1"
hostapd.add_ap(apdev[0]['ifname'], params)
hapd = hostapd.Hostapd(apdev[0]['ifname'])
dev[0].connect("test-wnm-rsn", psk="12345678", ieee80211w="2",
key_mgmt="WPA-PSK-SHA256", proto="WPA2", scan_freq="2412")
check_wnm_sleep_mode_enter_exit(hapd, dev[0])
开发者ID:aelarabawy，项目名称:hostap，代码行数:18，代码来源:test_wnm.py
示例15: test_ap_pmf_negative
def test_ap_pmf_negative(dev, apdev):
"""WPA2-PSK AP without PMF (negative test)"""
ssid = "test-pmf-negative"
wt = Wlantest()
wt.flush()
wt.add_passphrase("12345678")
params = hostapd.wpa2_params(ssid=ssid, passphrase="12345678")
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect(ssid, psk="12345678", ieee80211w="1",
key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2")
hwsim_utils.test_connectivity(dev[0].ifname, apdev[0]['ifname'])
try:
dev[1].connect(ssid, psk="12345678", ieee80211w="2",
key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2")
hwsim_utils.test_connectivity(dev[1].ifname, apdev[0]['ifname'])
raise Exception("PMF required STA connected to no PMF AP")
except Exception, e:
logger.debug("Ignore expected exception: " + str(e))
开发者ID:TransAct-projects，项目名称:platform_external_wpa_supplicant_8_ti，代码行数:18，代码来源:test_ap_pmf.py
示例16: setup_tdls
def setup_tdls(sta0, sta1, bssid, reverse=False, expect_fail=False):
logger.info("Setup TDLS")
addr0 = sta0.p2p_interface_addr()
addr1 = sta1.p2p_interface_addr()
wt = Wlantest()
wt.tdls_clear(bssid, addr0, addr1);
wt.tdls_clear(bssid, addr1, addr0);
sta0.tdls_setup(addr1)
time.sleep(1)
if expect_fail:
tdls_check_ap(sta0, sta1, bssid, addr0, addr1)
return
if reverse:
addr1 = sta0.p2p_interface_addr()
addr0 = sta1.p2p_interface_addr()
conf = wt.get_tdls_counter("setup_conf_ok", bssid, addr0, addr1);
if conf == 0:
raise Exception("No TDLS Setup Confirm (success) seen")
tdls_check_dl(sta0, sta1, bssid, addr0, addr1)
开发者ID:arend，项目名称:hostap，代码行数:19，代码来源:test_ap_tdls.py
示例17: test_ap_pmf_assoc_comeback
def test_ap_pmf_assoc_comeback(dev, apdev):
"""WPA2-PSK AP with PMF association comeback"""
ssid = "assoc-comeback"
wt = Wlantest()
wt.flush()
wt.add_passphrase("12345678")
params = hostapd.wpa2_params(ssid=ssid, passphrase="12345678")
params["wpa_key_mgmt"] = "WPA-PSK-SHA256";
params["ieee80211w"] = "2";
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect(ssid, psk="12345678", ieee80211w="1",
key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
scan_freq="2412")
hapd.set("ext_mgmt_frame_handling", "1")
dev[0].request("DISCONNECT")
ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"])
if ev is None:
raise Exception("Timeout on disconnection")
hapd.set("ext_mgmt_frame_handling", "0")
dev[0].request("REASSOCIATE")
ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED"])
if ev is None:
raise Exception("Timeout on re-connection")
if wt.get_sta_counter("assocresp_comeback", apdev[0]['bssid'],
dev[0].p2p_interface_addr()) < 1:
raise Exception("AP did not use association comeback request")
开发者ID:AlejandroAbad，项目名称:hostap，代码行数:26，代码来源:test_ap_pmf.py
示例18: test_ap_qosmap_default_acm
def test_ap_qosmap_default_acm(dev, apdev):
"""QoS mapping with default values and ACM=1 for VO/VI"""
ssid = "test-qosmap-default"
params = { "ssid": ssid,
"wmm_ac_bk_aifs": "7",
"wmm_ac_bk_cwmin": "4",
"wmm_ac_bk_cwmax": "10",
"wmm_ac_bk_txop_limit": "0",
"wmm_ac_bk_acm": "0",
"wmm_ac_be_aifs": "3",
"wmm_ac_be_cwmin": "4",
"wmm_ac_be_cwmax": "10",
"wmm_ac_be_txop_limit": "0",
"wmm_ac_be_acm": "0",
"wmm_ac_vi_aifs": "2",
"wmm_ac_vi_cwmin": "3",
"wmm_ac_vi_cwmax": "4",
"wmm_ac_vi_txop_limit": "94",
"wmm_ac_vi_acm": "1",
"wmm_ac_vo_aifs": "2",
"wmm_ac_vo_cwmin": "2",
"wmm_ac_vo_cwmax": "2",
"wmm_ac_vo_txop_limit": "47",
"wmm_ac_vo_acm": "1" }
hapd = hostapd.add_ap(apdev[0], params)
dev[0].connect(ssid, key_mgmt="NONE", scan_freq="2412")
addr = dev[0].p2p_interface_addr()
dev[0].request("DATA_TEST_CONFIG 1")
hapd.request("DATA_TEST_CONFIG 1")
Wlantest.setup(hapd)
for dscp in [ 0, 7, 8, 15, 16, 23, 24, 31, 32, 39, 40, 47, 48, 55, 56, 63]:
ap_tid = dscp >> 3
tid = ap_tid
# downgrade VI/VO to BE
if tid in [ 4, 5, 6, 7 ]:
tid = 3
check_qos_map(apdev[0], hapd, dev[0], addr, dscp, tid, ap_tid)
dev[0].request("DATA_TEST_CONFIG 0")
hapd.request("DATA_TEST_CONFIG 0")
开发者ID:gxk，项目名称:hostap，代码行数:39，代码来源:test_ap_qosmap.py
示例19: test_ap_qosmap
def test_ap_qosmap(dev, apdev):
"""QoS mapping"""
drv_flags = dev[0].get_driver_status_field("capa.flags")
if int(drv_flags, 0) & 0x40000000 == 0:
raise HwsimSkip("Driver does not support QoS Map")
ssid = "test-qosmap"
params = { "ssid": ssid }
params['qos_map_set'] = '53,2,22,6,8,15,0,7,255,255,16,31,32,39,255,255,40,47,48,55'
hapd = hostapd.add_ap(apdev[0], params)
dev[0].connect(ssid, key_mgmt="NONE", scan_freq="2412")
time.sleep(0.1)
addr = dev[0].p2p_interface_addr()
dev[0].request("DATA_TEST_CONFIG 1")
hapd.request("DATA_TEST_CONFIG 1")
Wlantest.setup(hapd)
check_qos_map(apdev[0], hapd, dev[0], addr, 53, 2)
check_qos_map(apdev[0], hapd, dev[0], addr, 22, 6)
check_qos_map(apdev[0], hapd, dev[0], addr, 8, 0)
check_qos_map(apdev[0], hapd, dev[0], addr, 15, 0)
check_qos_map(apdev[0], hapd, dev[0], addr, 0, 1)
check_qos_map(apdev[0], hapd, dev[0], addr, 7, 1)
check_qos_map(apdev[0], hapd, dev[0], addr, 16, 3)
check_qos_map(apdev[0], hapd, dev[0], addr, 31, 3)
check_qos_map(apdev[0], hapd, dev[0], addr, 32, 4)
check_qos_map(apdev[0], hapd, dev[0], addr, 39, 4)
check_qos_map(apdev[0], hapd, dev[0], addr, 40, 6)
check_qos_map(apdev[0], hapd, dev[0], addr, 47, 6)
check_qos_map(apdev[0], hapd, dev[0], addr, 48, 7)
check_qos_map(apdev[0], hapd, dev[0], addr, 55, 7)
hapd.request("SET_QOS_MAP_SET 22,6,8,15,0,7,255,255,16,31,32,39,255,255,40,47,48,55")
hapd.request("SEND_QOS_MAP_CONF " + dev[0].get_status_field("address"))
check_qos_map(apdev[0], hapd, dev[0], addr, 53, 7)
check_qos_map(apdev[0], hapd, dev[0], addr, 22, 6)
check_qos_map(apdev[0], hapd, dev[0], addr, 48, 7)
check_qos_map(apdev[0], hapd, dev[0], addr, 55, 7)
check_qos_map(apdev[0], hapd, dev[0], addr, 56, 56 >> 3)
check_qos_map(apdev[0], hapd, dev[0], addr, 63, 63 >> 3)
dev[0].request("DATA_TEST_CONFIG 0")
hapd.request("DATA_TEST_CONFIG 0")
开发者ID:gxk，项目名称:hostap，代码行数:39，代码来源:test_ap_qosmap.py
示例20: run_ap_wpa2_delayed_m1_m3_retransmission
def run_ap_wpa2_delayed_m1_m3_retransmission(dev, apdev,
change_m1_anonce=False):
params = hostapd.wpa2_params(ssid="test-wpa2-psk", passphrase="12345678")
hapd = hostapd.add_ap(apdev[0], params)
Wlantest.setup(hapd)
wt = Wlantest()
wt.flush()
wt.add_passphrase("12345678")
phy = dev[0].get_driver_status_field("phyname")
dev[0].connect("test-wpa2-psk", psk="12345678", scan_freq="2412")
for i in range(5):
hwsim_utils.test_connectivity(dev[0], hapd)
time.sleep(0.1)
before_tk = get_rx_spec(phy, gtk=False).splitlines()
before_gtk = get_rx_spec(phy, gtk=True).splitlines()
addr = dev[0].own_addr()
if change_m1_anonce:
if "OK" not in hapd.request("RESEND_M1 " + addr + " change-anonce"):
raise Exception("RESEND_M1 failed")
if "OK" not in hapd.request("RESEND_M1 " + addr):
raise Exception("RESEND_M1 failed")
if "OK" not in hapd.request("RESEND_M3 " + addr):
raise Exception("RESEND_M3 failed")
time.sleep(0.1)
after_tk = get_rx_spec(phy, gtk=False).splitlines()
after_gtk = get_rx_spec(phy, gtk=True).splitlines()
if "OK" not in hapd.request("RESET_PN " + addr):
raise Exception("RESET_PN failed")
time.sleep(0.1)
hwsim_utils.test_connectivity(dev[0], hapd, timeout=1,
success_expected=False)
dev[0].request("DISCONNECT")
dev[0].wait_disconnected()
for i in range(len(before_tk)):
b = int(before_tk[i], 16)
a = int(after_tk[i], 16)
if a < b:
raise Exception("TK RX counter decreased: idx=%d before=%d after=%d" % (i, b, a))
for i in range(len(before_gtk)):
b = int(before_gtk[i], 16)
a = int(after_gtk[i], 16)
if a < b:
raise Exception("GTK RX counter decreased: idx=%d before=%d after=%d" % (i, b, a))
开发者ID:janetuk，项目名称:mech_eap，代码行数:50，代码来源:test_ap_ciphers.py
注：本文中的wlantest.Wlantest类示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论