本文整理汇总了C#中System.IdentityModel.Tokens.SecurityTokenHandler.ValidateToken方法的典型用法代码示例。如果您正苦于以下问题:C# SecurityTokenHandler.ValidateToken方法的具体用法?C# SecurityTokenHandler.ValidateToken怎么用?C# SecurityTokenHandler.ValidateToken使用的例子?那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。
在下文中一共展示了SecurityTokenHandler.ValidateToken方法的5个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C#代码示例。
示例1: ValidateToken
/// <summary>
/// This method validates the Simple Web Token.
/// </summary>
/// <param name="token">A simple web token.</param>
/// <returns>A Claims Collection which contains all the claims from the token.</returns>
public override ReadOnlyCollection<ClaimsIdentity> ValidateToken(SecurityToken token)
{
if ( token == null )
{
throw new ArgumentNullException( "token" );
}
SimpleWebToken simpleWebToken = token as SimpleWebToken;
if ( simpleWebToken == null )
{
throw new ArgumentException("The token provided must be of type SimpleWebToken.");
}
if ( DateTime.Compare( simpleWebToken.ValidTo.Add( Configuration.MaxClockSkew ), DateTime.UtcNow ) <= 0 )
{
throw new SecurityTokenExpiredException("The incoming token has expired. Get a new access token from the Authorization Server.");
}
ValidateSignature( simpleWebToken );
ValidateAudience( simpleWebToken.Audience );
ClaimsIdentity claimsIdentity = CreateClaims( simpleWebToken );
if (this.Configuration.SaveBootstrapContext)
{
claimsIdentity.BootstrapContext = new BootstrapContext(simpleWebToken.SerializedToken);
}
List<ClaimsIdentity> claimCollection = new List<ClaimsIdentity>(new ClaimsIdentity[] { claimsIdentity });
return claimCollection.AsReadOnly();
}
开发者ID:.NET开发者,项目名称:System.IdentityModel.Tokens,代码行数:37,代码来源:SecurityTokenHandler.ValidateToken
示例2: CreateClaims
/// <summary>Creates <see cref="Claim"/>'s from the incoming token.
/// </summary>
/// <param name="simpleWebToken">The incoming <see cref="SimpleWebToken"/>.</param>
/// <returns>A <see cref="ClaimsIdentity"/> created from the token.</returns>
protected virtual ClaimsIdentity CreateClaims( SimpleWebToken simpleWebToken )
{
if ( simpleWebToken == null )
{
throw new ArgumentNullException( "simpleWebToken" );
}
NameValueCollection tokenProperties = simpleWebToken.GetAllProperties();
if ( tokenProperties == null )
{
throw new SecurityTokenValidationException( "No claims can be created from this Simple Web Token." );
}
if ( Configuration.IssuerNameRegistry == null )
{
throw new InvalidOperationException( "The Configuration.IssuerNameRegistry property of this SecurityTokenHandler is set to null. Tokens cannot be validated in this state." );
}
string normalizedIssuer = Configuration.IssuerNameRegistry.GetIssuerName( simpleWebToken );
ClaimsIdentity identity = new ClaimsIdentity(AuthenticationTypes.Federation);
foreach ( string key in tokenProperties.Keys )
{
if ( ! IsReservedKeyName(key) && !string.IsNullOrEmpty( tokenProperties[key] ) )
{
identity.AddClaim( new Claim( key, tokenProperties[key], ClaimValueTypes.String, normalizedIssuer ) );
if ( key == AcsNameClaimType )
{
// add a default name claim from the Name identifier claim.
identity.AddClaim( new Claim( DefaultNameClaimType, tokenProperties[key], ClaimValueTypes.String, normalizedIssuer ) );
}
}
}
return identity;
}
开发者ID:.NET开发者,项目名称:System.IdentityModel.Tokens,代码行数:41,代码来源:SecurityTokenHandler.ValidateToken
示例3: ValidateSignature
/// <summary>
/// Validates the signature on the incoming token.
/// </summary>
/// <param name="simpleWebToken">The incoming <see cref="SimpleWebToken"/>.</param>
protected virtual void ValidateSignature( SimpleWebToken simpleWebToken )
{
if ( simpleWebToken == null )
{
throw new ArgumentNullException( "simpleWebToken" );
}
if ( String.IsNullOrEmpty( simpleWebToken.SerializedToken ) || String.IsNullOrEmpty( simpleWebToken.Signature ) )
{
throw new SecurityTokenValidationException( "The token does not have a signature to verify" );
}
string serializedToken = simpleWebToken.SerializedToken;
string unsignedToken = null;
// Find the last parameter. The signature must be last per SWT specification.
int lastSeparator = serializedToken.LastIndexOf( ParameterSeparator );
// Check whether the last parameter is an hmac.
if ( lastSeparator > 0 )
{
string lastParamStart = ParameterSeparator + SimpleWebTokenConstants.Signature + "=";
string lastParam = serializedToken.Substring( lastSeparator );
// Strip the trailing hmac to obtain the original unsigned string for later hmac verification.
if ( lastParam.StartsWith( lastParamStart, StringComparison.Ordinal ) )
{
unsignedToken = serializedToken.Substring( 0, lastSeparator );
}
}
SimpleWebTokenKeyIdentifierClause clause = new SimpleWebTokenKeyIdentifierClause(simpleWebToken.Audience);
InMemorySymmetricSecurityKey securityKey = null;
try
{
securityKey = (InMemorySymmetricSecurityKey)this.Configuration.IssuerTokenResolver.ResolveSecurityKey(clause);
}
catch (InvalidOperationException)
{
throw new SecurityTokenValidationException( "A Symmetric key was not found for the given key identifier clause.");
}
string generatedSignature = GenerateSignature( unsignedToken, securityKey.GetSymmetricKey() );
if ( string.CompareOrdinal( generatedSignature, simpleWebToken.Signature ) != 0 )
{
throw new SecurityTokenValidationException( "The signature on the incoming token is invalid.") ;
}
}
开发者ID:.NET开发者,项目名称:System.IdentityModel.Tokens,代码行数:53,代码来源:SecurityTokenHandler.ValidateToken
示例4: GenerateSignature
/// <summary>
/// Generates an HMACSHA256 signature for a given string and key.
/// </summary>
/// <param name="unsignedToken">The token to be signed.</param>
/// <param name="signingKey">The key used to generate the signature.</param>
/// <returns>The generated signature.</returns>
protected static string GenerateSignature(string unsignedToken, byte[] signingKey)
{
using (HMACSHA256 hmac = new HMACSHA256(signingKey))
{
byte[] signatureBytes = hmac.ComputeHash(Encoding.ASCII.GetBytes(unsignedToken));
string signature = HttpUtility.UrlEncode(Convert.ToBase64String(signatureBytes));
return signature;
}
}
开发者ID:.NET开发者,项目名称:System.IdentityModel.Tokens,代码行数:16,代码来源:SecurityTokenHandler.ValidateToken
示例5: ValidateAudience
/// <summary>
/// Validates the audience of the incoming token with those specified in configuration.
/// </summary>
/// <param name="tokenAudience">The audience of the incoming token.</param>
protected virtual void ValidateAudience( string tokenAudience )
{
if ( Configuration.AudienceRestriction.AudienceMode != AudienceUriMode.Never )
{
if ( String.IsNullOrEmpty( tokenAudience ) )
{
throw new SecurityTokenValidationException("The incoming token does not have a valid audience Uri and the Audience Restriction is not set to 'None'.");
}
if ( Configuration.AudienceRestriction.AllowedAudienceUris.Count == 0 )
{
throw new InvalidOperationException( " Audience Restriction is not set to 'None' but no valid audience URI's are configured." );
}
IList<Uri> allowedAudienceUris = Configuration.AudienceRestriction.AllowedAudienceUris;
Uri audienceUri = null;
Uri.TryCreate(tokenAudience, UriKind.RelativeOrAbsolute, out audienceUri);
// Strip off any query string or fragment.
Uri audienceLeftPart;
if ( audienceUri.IsAbsoluteUri )
{
audienceLeftPart = new Uri( audienceUri.GetLeftPart( UriPartial.Path ) );
}
else
{
Uri baseUri = new Uri( "http://www.example.com" );
Uri resolved = new Uri( baseUri, tokenAudience );
audienceLeftPart = baseUri.MakeRelativeUri( new Uri( resolved.GetLeftPart( UriPartial.Path ) ) );
}
if ( !allowedAudienceUris.Contains( audienceLeftPart ) )
{
throw new AudienceUriValidationFailedException(
"The Audience Uri of the incoming token is not present in the list of permitted Audience Uri's.");
}
}
}
开发者ID:.NET开发者,项目名称:System.IdentityModel.Tokens,代码行数:45,代码来源:SecurityTokenHandler.ValidateToken
注:本文中的System.IdentityModel.Tokens.SecurityTokenHandler.ValidateToken方法示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论