Python Qsci.QsciLexerPython类代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› Python›Python编程经验

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Python中qgis.PyQt.Qsci.QsciLexerPython类的典型用法代码示例。如果您正苦于以下问题：Python QsciLexerPython类的具体用法？Python QsciLexerPython怎么用？Python QsciLexerPython使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。

在下文中一共展示了QsciLexerPython类的13个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Python代码示例。

示例1: setLexers

    def setLexers(self):
        self.lexer = QsciLexerPython()

        font = QFontDatabase.systemFont(QFontDatabase.FixedFont)

        loadFont = self.settings.value("pythonConsole/fontfamilytext")
        if loadFont:
            font.setFamily(loadFont)
        fontSize = self.settings.value("pythonConsole/fontsize", type=int)
        if fontSize:
            font.setPointSize(fontSize)

        self.lexer.setDefaultFont(font)
        self.lexer.setDefaultColor(QColor(self.settings.value("pythonConsole/defaultFontColor", QColor(Qt.black))))
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/commentFontColor", QColor(Qt.gray))), 1)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/keywordFontColor", QColor(Qt.darkGreen))), 5)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/classFontColor", QColor(Qt.blue))), 8)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/methodFontColor", QColor(Qt.darkGray))), 9)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/decorFontColor", QColor(Qt.darkBlue))), 15)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/commentBlockFontColor", QColor(Qt.gray))), 12)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/singleQuoteFontColor", QColor(Qt.blue))), 4)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/doubleQuoteFontColor", QColor(Qt.blue))), 3)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/tripleSingleQuoteFontColor", QColor(Qt.blue))), 6)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/tripleDoubleQuoteFontColor", QColor(Qt.blue))), 7)
        self.lexer.setColor(QColor(Qt.red), 14)
        self.lexer.setFont(font, 1)
        self.lexer.setFont(font, 2)
        self.lexer.setFont(font, 3)
        self.lexer.setFont(font, 4)

        for style in range(0, 33):
            paperColor = QColor(self.settings.value("pythonConsole/paperBackgroundColor", QColor(Qt.white)))
            self.lexer.setPaper(paperColor, style)

        self.setLexer(self.lexer)

开发者ID:Cracert，项目名称:Quantum-GIS，代码行数:35，代码来源:console_output.py

示例2: initLexer

    def initLexer(self):
        settings = QgsSettings()
        self.lexer = QsciLexerPython()

        font = QFontDatabase.systemFont(QFontDatabase.FixedFont)

        loadFont = settings.value("pythonConsole/fontfamilytextEditor")
        if loadFont:
            font.setFamily(loadFont)
        fontSize = settings.value("pythonConsole/fontsizeEditor", type=int)
        if fontSize:
            font.setPointSize(fontSize)

        self.lexer.setDefaultFont(font)
        self.lexer.setDefaultColor(QColor(settings.value("pythonConsole/defaultFontColorEditor", QColor(self.DEFAULT_COLOR))))
        self.lexer.setColor(QColor(settings.value("pythonConsole/commentFontColorEditor", QColor(self.COMMENT_COLOR))), 1)
        self.lexer.setColor(QColor(settings.value("pythonConsole/numberFontColorEditor", QColor(self.NUMBER_COLOR))), 2)
        self.lexer.setColor(QColor(settings.value("pythonConsole/keywordFontColorEditor", QColor(self.KEYWORD_COLOR))), 5)
        self.lexer.setColor(QColor(settings.value("pythonConsole/classFontColorEditor", QColor(self.CLASS_COLOR))), 8)
        self.lexer.setColor(QColor(settings.value("pythonConsole/methodFontColorEditor", QColor(self.METHOD_COLOR))), 9)
        self.lexer.setColor(QColor(settings.value("pythonConsole/decorFontColorEditor", QColor(self.DECORATION_COLOR))), 15)
        self.lexer.setColor(QColor(settings.value("pythonConsole/commentBlockFontColorEditor", QColor(self.COMMENT_BLOCK_COLOR))), 12)
        self.lexer.setColor(QColor(settings.value("pythonConsole/singleQuoteFontColorEditor", QColor(self.SINGLE_QUOTE_COLOR))), 4)
        self.lexer.setColor(QColor(settings.value("pythonConsole/doubleQuoteFontColorEditor", QColor(self.DOUBLE_QUOTE_COLOR))), 3)
        self.lexer.setColor(QColor(settings.value("pythonConsole/tripleSingleQuoteFontColorEditor", QColor(self.TRIPLE_SINGLE_QUOTE_COLOR))), 6)
        self.lexer.setColor(QColor(settings.value("pythonConsole/tripleDoubleQuoteFontColorEditor", QColor(self.TRIPLE_DOUBLE_QUOTE_COLOR))), 7)
        self.lexer.setColor(QColor(settings.value("pythonConsole/defaultFontColorEditor", QColor(self.DEFAULT_COLOR))), 13)
        self.lexer.setFont(font, 1)
        self.lexer.setFont(font, 3)
        self.lexer.setFont(font, 4)
        self.lexer.setFont(font, QsciLexerPython.UnclosedString)

        for style in range(0, 33):
            paperColor = QColor(settings.value("pythonConsole/paperBackgroundColorEditor", QColor(self.BACKGROUND_COLOR)))
            self.lexer.setPaper(paperColor, style)

        self.api = QsciAPIs(self.lexer)

        useDefaultAPI = bool(settings.value('pythonConsole/preloadAPI',
                                            True))
        if useDefaultAPI:
            # Load QGIS API shipped with Python console
            self.api.loadPrepared(
                os.path.join(QgsApplication.pkgDataPath(),
                             'python', 'qsci_apis', 'pyqgis.pap'))
        else:
            # Load user-defined API files
            apiPaths = settings.value('pythonConsole/userAPI', [])
            for path in apiPaths:
                self.api.load(path)
            self.api.prepare()
            self.lexer.setAPIs(self.api)

        self.setLexer(self.lexer)

开发者ID:yoichigmf，项目名称:QGIS，代码行数:54，代码来源:ScriptEdit.py

示例3: setLexers

    def setLexers(self):
        self.lexer = QsciLexerPython()

        font = QFontDatabase.systemFont(QFontDatabase.FixedFont)

        loadFont = self.settings.value("pythonConsole/fontfamilytext")
        if loadFont:
            font.setFamily(loadFont)
        fontSize = self.settings.value("pythonConsole/fontsize", type=int)
        if fontSize:
            font.setPointSize(fontSize)

        self.lexer.setDefaultFont(font)
        self.lexer.setDefaultColor(QColor(self.settings.value("pythonConsole/defaultFontColor", QColor(self.DEFAULT_COLOR))))
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/commentFontColor", QColor(self.COMMENT_COLOR))), 1)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/numberFontColor", QColor(self.NUMBER_COLOR))), 2)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/keywordFontColor", QColor(self.KEYWORD_COLOR))), 5)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/classFontColor", QColor(self.CLASS_COLOR))), 8)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/methodFontColor", QColor(self.METHOD_COLOR))), 9)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/decorFontColor", QColor(self.DECORATION_COLOR))), 15)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/commentBlockFontColor", QColor(self.COMMENT_BLOCK_COLOR))), 12)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/singleQuoteFontColor", QColor(self.SINGLE_QUOTE_COLOR))), 4)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/doubleQuoteFontColor", QColor(self.DOUBLE_QUOTE_COLOR))), 3)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/tripleSingleQuoteFontColor", QColor(self.TRIPLE_SINGLE_QUOTE_COLOR))), 6)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/tripleDoubleQuoteFontColor", QColor(self.TRIPLE_DOUBLE_QUOTE_COLOR))), 7)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/defaultFontColorEditor", QColor(self.DEFAULT_COLOR))), 13)
        self.lexer.setFont(font, 1)
        self.lexer.setFont(font, 3)
        self.lexer.setFont(font, 4)
        self.lexer.setFont(font, QsciLexerPython.UnclosedString)

        for style in range(0, 33):
            paperColor = QColor(self.settings.value("pythonConsole/paperBackgroundColor", QColor(self.BACKGROUND_COLOR)))
            self.lexer.setPaper(paperColor, style)

        self.api = QsciAPIs(self.lexer)
        checkBoxAPI = self.settings.value("pythonConsole/preloadAPI", True, type=bool)
        checkBoxPreparedAPI = self.settings.value("pythonConsole/usePreparedAPIFile", False, type=bool)
        if checkBoxAPI:
            pap = os.path.join(QgsApplication.pkgDataPath(), "python", "qsci_apis", "pyqgis.pap")
            self.api.loadPrepared(pap)
        elif checkBoxPreparedAPI:
            self.api.loadPrepared(self.settings.value("pythonConsole/preparedAPIFile"))
        else:
            apiPath = self.settings.value("pythonConsole/userAPI", [])
            for i in range(0, len(apiPath)):
                self.api.load(apiPath[i])
            self.api.prepare()
            self.lexer.setAPIs(self.api)

        self.setLexer(self.lexer)

开发者ID:AlisterH，项目名称:Quantum-GIS，代码行数:51，代码来源:console_sci.py

示例4: setLexers

    def setLexers(self):
        self.lexer = QsciLexerPython()

        loadFont = self.settings.value("pythonConsole/fontfamilytext", "Monospace")
        fontSize = self.settings.value("pythonConsole/fontsize", 10, type=int)

        font = QFont(loadFont)
        font.setFixedPitch(True)
        font.setPointSize(fontSize)
        font.setStyleHint(QFont.TypeWriter)
        font.setStretch(QFont.SemiCondensed)
        font.setLetterSpacing(QFont.PercentageSpacing, 87.0)
        font.setBold(False)

        self.lexer.setDefaultFont(font)
        self.lexer.setDefaultColor(QColor(self.settings.value("pythonConsole/defaultFontColor", QColor(Qt.black))))
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/commentFontColor", QColor(Qt.gray))), 1)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/keywordFontColor", QColor(Qt.darkGreen))), 5)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/classFontColor", QColor(Qt.blue))), 8)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/methodFontColor", QColor(Qt.darkGray))), 9)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/decorFontColor", QColor(Qt.darkBlue))), 15)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/commentBlockFontColor", QColor(Qt.gray))), 12)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/singleQuoteFontColor", QColor(Qt.blue))), 4)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/doubleQuoteFontColor", QColor(Qt.blue))), 3)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/tripleSingleQuoteFontColor", QColor(Qt.blue))), 6)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/tripleDoubleQuoteFontColor", QColor(Qt.blue))), 7)
        self.lexer.setFont(font, 1)
        self.lexer.setFont(font, 3)
        self.lexer.setFont(font, 4)

        for style in range(0, 33):
            paperColor = QColor(self.settings.value("pythonConsole/paperBackgroundColor", QColor(Qt.white)))
            self.lexer.setPaper(paperColor, style)

        self.api = QsciAPIs(self.lexer)
        chekBoxAPI = self.settings.value("pythonConsole/preloadAPI", True, type=bool)
        chekBoxPreparedAPI = self.settings.value("pythonConsole/usePreparedAPIFile", False, type=bool)
        if chekBoxAPI:
            pap = os.path.join(QgsApplication.pkgDataPath(), "python", "qsci_apis", "pyqgis.pap")
            self.api.loadPrepared(pap)
        elif chekBoxPreparedAPI:
            self.api.loadPrepared(self.settings.value("pythonConsole/preparedAPIFile"))
        else:
            apiPath = self.settings.value("pythonConsole/userAPI", [])
            for i in range(0, len(apiPath)):
                self.api.load(apiPath[i])
            self.api.prepare()
            self.lexer.setAPIs(self.api)

        self.setLexer(self.lexer)

开发者ID:AM7000000，项目名称:QGIS，代码行数:50，代码来源:console_sci.py

示例5: initLexer

    def initLexer(self):
        if self.lexerType == self.LEXER_PYTHON:
            self.lexer = QsciLexerPython()

            colorDefault = QColor('#2e3436')
            colorComment = QColor('#c00')
            colorCommentBlock = QColor('#3465a4')
            colorNumber = QColor('#4e9a06')
            colorType = QColor('#4e9a06')
            colorKeyword = QColor('#204a87')
            colorString = QColor('#ce5c00')

            self.lexer.setDefaultFont(self.defaultFont)
            self.lexer.setDefaultColor(colorDefault)

            self.lexer.setColor(colorComment, 1)
            self.lexer.setColor(colorNumber, 2)
            self.lexer.setColor(colorString, 3)
            self.lexer.setColor(colorString, 4)
            self.lexer.setColor(colorKeyword, 5)
            self.lexer.setColor(colorString, 6)
            self.lexer.setColor(colorString, 7)
            self.lexer.setColor(colorType, 8)
            self.lexer.setColor(colorCommentBlock, 12)
            self.lexer.setColor(colorString, 15)

            self.lexer.setFont(self.italicFont, 1)
            self.lexer.setFont(self.boldFont, 5)
            self.lexer.setFont(self.boldFont, 8)
            self.lexer.setFont(self.italicFont, 12)

            self.api = QsciAPIs(self.lexer)

            settings = QgsSettings()
            useDefaultAPI = bool(settings.value('pythonConsole/preloadAPI',
                                                True))
            if useDefaultAPI:
                # Load QGIS API shipped with Python console
                self.api.loadPrepared(
                    os.path.join(QgsApplication.pkgDataPath(),
                                 'python', 'qsci_apis', 'pyqgis.pap'))
            else:
                # Load user-defined API files
                apiPaths = settings.value('pythonConsole/userAPI', [])
                for path in apiPaths:
                    self.api.load(path)
                self.api.prepare()
                self.lexer.setAPIs(self.api)

        self.setLexer(self.lexer)

开发者ID:exlimit，项目名称:QGIS，代码行数:50，代码来源:ScriptEdit.py

示例6: setLexers

    def setLexers(self):
        self.lexer = QsciLexerPython()

        font = QFontDatabase.systemFont(QFontDatabase.FixedFont)

        loadFont = self.settings.value("pythonConsole/fontfamilytext")
        if loadFont:
            font.setFamily(loadFont)
        fontSize = self.settings.value("pythonConsole/fontsize", type=int)
        if fontSize:
            font.setPointSize(fontSize)

        self.lexer.setDefaultFont(font)
        self.lexer.setDefaultColor(QColor(self.settings.value("pythonConsole/defaultFontColor", QColor(Qt.black))))
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/commentFontColor", QColor(Qt.gray))), 1)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/keywordFontColor", QColor(Qt.darkGreen))), 5)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/classFontColor", QColor(Qt.blue))), 8)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/methodFontColor", QColor(Qt.darkGray))), 9)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/decorFontColor", QColor(Qt.darkBlue))), 15)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/commentBlockFontColor", QColor(Qt.gray))), 12)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/singleQuoteFontColor", QColor(Qt.blue))), 4)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/doubleQuoteFontColor", QColor(Qt.blue))), 3)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/tripleSingleQuoteFontColor", QColor(Qt.blue))), 6)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/tripleDoubleQuoteFontColor", QColor(Qt.blue))), 7)
        self.lexer.setFont(font, 1)
        self.lexer.setFont(font, 3)
        self.lexer.setFont(font, 4)

        for style in range(0, 33):
            paperColor = QColor(self.settings.value("pythonConsole/paperBackgroundColor", QColor(Qt.white)))
            self.lexer.setPaper(paperColor, style)

        self.api = QsciAPIs(self.lexer)
        checkBoxAPI = self.settings.value("pythonConsole/preloadAPI", True, type=bool)
        checkBoxPreparedAPI = self.settings.value("pythonConsole/usePreparedAPIFile", False, type=bool)
        if checkBoxAPI:
            pap = os.path.join(QgsApplication.pkgDataPath(), "python", "qsci_apis", "pyqgis.pap")
            self.api.loadPrepared(pap)
        elif checkBoxPreparedAPI:
            self.api.loadPrepared(self.settings.value("pythonConsole/preparedAPIFile"))
        else:
            apiPath = self.settings.value("pythonConsole/userAPI", [])
            for i in range(0, len(apiPath)):
                self.api.load(apiPath[i])
            self.api.prepare()
            self.lexer.setAPIs(self.api)

        self.setLexer(self.lexer)

开发者ID:peterisb，项目名称:QGIS，代码行数:48，代码来源:console_sci.py

示例7: setLexers

    def setLexers(self):
        self.lexer = QsciLexerPython()

        font = QFontDatabase.systemFont(QFontDatabase.FixedFont)

        loadFont = self.settings.value("pythonConsole/fontfamilytext")
        if loadFont:
            font.setFamily(loadFont)
        fontSize = self.settings.value("pythonConsole/fontsize", type=int)
        if fontSize:
            font.setPointSize(fontSize)

        self.lexer.setDefaultFont(font)
        self.lexer.setDefaultColor(QColor(self.settings.value("pythonConsole/defaultFontColor", QColor(self.DEFAULT_COLOR))))
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/commentFontColor", QColor(self.COMMENT_COLOR))), 1)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/numberFontColor", QColor(self.NUMBER_COLOR))), 2)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/keywordFontColor", QColor(self.KEYWORD_COLOR))), 5)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/classFontColor", QColor(self.CLASS_COLOR))), 8)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/methodFontColor", QColor(self.METHOD_COLOR))), 9)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/decorFontColor", QColor(self.DECORATION_COLOR))), 15)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/commentBlockFontColor", QColor(self.COMMENT_BLOCK_COLOR))), 12)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/singleQuoteFontColor", QColor(self.SINGLE_QUOTE_COLOR))), 4)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/doubleQuoteFontColor", QColor(self.DOUBLE_QUOTE_COLOR))), 3)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/tripleSingleQuoteFontColor", QColor(self.TRIPLE_SINGLE_QUOTE_COLOR))), 6)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/tripleDoubleQuoteFontColor", QColor(self.TRIPLE_DOUBLE_QUOTE_COLOR))), 7)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/defaultFontColorEditor", QColor(self.DEFAULT_COLOR))), 13)
        self.lexer.setColor(QColor(Qt.red), 14)
        self.lexer.setFont(font, 1)
        self.lexer.setFont(font, 2)
        self.lexer.setFont(font, 3)
        self.lexer.setFont(font, 4)
        self.lexer.setFont(font, QsciLexerPython.UnclosedString)

        for style in range(0, 33):
            paperColor = QColor(self.settings.value("pythonConsole/paperBackgroundColor", QColor(self.BACKGROUND_COLOR)))
            self.lexer.setPaper(paperColor, style)

        self.setLexer(self.lexer)

开发者ID:DelazJ，项目名称:QGIS，代码行数:38，代码来源:console_output.py

示例8: setLexers

    def setLexers(self):
        self.lexer = QsciLexerPython()

        loadFont = self.settings.value("pythonConsole/fontfamilytext", "Monospace")
        fontSize = self.settings.value("pythonConsole/fontsize", 10, type=int)
        font = QFont(loadFont)
        font.setFixedPitch(True)
        font.setPointSize(fontSize)
        font.setStyleHint(QFont.TypeWriter)
        font.setStretch(QFont.SemiCondensed)
        font.setLetterSpacing(QFont.PercentageSpacing, 87.0)
        font.setBold(False)

        self.lexer.setDefaultFont(font)
        self.lexer.setDefaultColor(QColor(self.settings.value("pythonConsole/defaultFontColor", QColor(Qt.black))))
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/commentFontColor", QColor(Qt.gray))), 1)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/keywordFontColor", QColor(Qt.darkGreen))), 5)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/classFontColor", QColor(Qt.blue))), 8)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/methodFontColor", QColor(Qt.darkGray))), 9)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/decorFontColor", QColor(Qt.darkBlue))), 15)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/commentBlockFontColor", QColor(Qt.gray))), 12)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/singleQuoteFontColor", QColor(Qt.blue))), 4)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/doubleQuoteFontColor", QColor(Qt.blue))), 3)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/tripleSingleQuoteFontColor", QColor(Qt.blue))), 6)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/tripleDoubleQuoteFontColor", QColor(Qt.blue))), 7)
        self.lexer.setColor(QColor(Qt.red), 14)
        self.lexer.setFont(font, 1)
        self.lexer.setFont(font, 2)
        self.lexer.setFont(font, 3)
        self.lexer.setFont(font, 4)

        for style in range(0, 33):
            paperColor = QColor(self.settings.value("pythonConsole/paperBackgroundColor", QColor(Qt.white)))
            self.lexer.setPaper(paperColor, style)

        self.setLexer(self.lexer)

开发者ID:AM7000000，项目名称:QGIS，代码行数:36，代码来源:console_output.py

示例9: ScriptEdit


#.........这里部分代码省略.........
        self.setFonts(10)
        self.initLexer()

    def setFonts(self, size):
        # Load font from Python console settings
        settings = QgsSettings()
        fontName = settings.value('pythonConsole/fontfamilytext', 'Monospace')
        fontSize = int(settings.value('pythonConsole/fontsize', size))

        self.defaultFont = QFont(fontName)
        self.defaultFont.setFixedPitch(True)
        self.defaultFont.setPointSize(fontSize)
        self.defaultFont.setStyleHint(QFont.TypeWriter)
        self.defaultFont.setBold(False)

        self.boldFont = QFont(self.defaultFont)
        self.boldFont.setBold(True)

        self.italicFont = QFont(self.defaultFont)
        self.italicFont.setItalic(True)

        self.setFont(self.defaultFont)
        self.setMarginsFont(self.defaultFont)

    def initShortcuts(self):
        (ctrl, shift) = (self.SCMOD_CTRL << 16, self.SCMOD_SHIFT << 16)

        # Disable some shortcuts
        self.SendScintilla(QsciScintilla.SCI_CLEARCMDKEY, ord('D') + ctrl)
        self.SendScintilla(QsciScintilla.SCI_CLEARCMDKEY, ord('L') + ctrl)
        self.SendScintilla(QsciScintilla.SCI_CLEARCMDKEY, ord('L') + ctrl +
                           shift)
        self.SendScintilla(QsciScintilla.SCI_CLEARCMDKEY, ord('T') + ctrl)

        # self.SendScintilla(QsciScintilla.SCI_CLEARCMDKEY, ord("Z") + ctrl)
        # self.SendScintilla(QsciScintilla.SCI_CLEARCMDKEY, ord("Y") + ctrl)

        # Use Ctrl+Space for autocompletion
        self.shortcutAutocomplete = QShortcut(QKeySequence(Qt.CTRL +
                                                           Qt.Key_Space), self)
        self.shortcutAutocomplete.setContext(Qt.WidgetShortcut)
        self.shortcutAutocomplete.activated.connect(self.autoComplete)

    def autoComplete(self):
        self.autoCompleteFromAll()

    def initLexer(self):
        settings = QgsSettings()
        self.lexer = QsciLexerPython()

        font = QFontDatabase.systemFont(QFontDatabase.FixedFont)

        loadFont = settings.value("pythonConsole/fontfamilytextEditor")
        if loadFont:
            font.setFamily(loadFont)
        fontSize = settings.value("pythonConsole/fontsizeEditor", type=int)
        if fontSize:
            font.setPointSize(fontSize)

        self.lexer.setDefaultFont(font)
        self.lexer.setDefaultColor(QColor(settings.value("pythonConsole/defaultFontColorEditor", QColor(self.DEFAULT_COLOR))))
        self.lexer.setColor(QColor(settings.value("pythonConsole/commentFontColorEditor", QColor(self.COMMENT_COLOR))), 1)
        self.lexer.setColor(QColor(settings.value("pythonConsole/numberFontColorEditor", QColor(self.NUMBER_COLOR))), 2)
        self.lexer.setColor(QColor(settings.value("pythonConsole/keywordFontColorEditor", QColor(self.KEYWORD_COLOR))), 5)
        self.lexer.setColor(QColor(settings.value("pythonConsole/classFontColorEditor", QColor(self.CLASS_COLOR))), 8)
        self.lexer.setColor(QColor(settings.value("pythonConsole/methodFontColorEditor", QColor(self.METHOD_COLOR))), 9)
        self.lexer.setColor(QColor(settings.value("pythonConsole/decorFontColorEditor", QColor(self.DECORATION_COLOR))), 15)
        self.lexer.setColor(QColor(settings.value("pythonConsole/commentBlockFontColorEditor", QColor(self.COMMENT_BLOCK_COLOR))), 12)
        self.lexer.setColor(QColor(settings.value("pythonConsole/singleQuoteFontColorEditor", QColor(self.SINGLE_QUOTE_COLOR))), 4)
        self.lexer.setColor(QColor(settings.value("pythonConsole/doubleQuoteFontColorEditor", QColor(self.DOUBLE_QUOTE_COLOR))), 3)
        self.lexer.setColor(QColor(settings.value("pythonConsole/tripleSingleQuoteFontColorEditor", QColor(self.TRIPLE_SINGLE_QUOTE_COLOR))), 6)
        self.lexer.setColor(QColor(settings.value("pythonConsole/tripleDoubleQuoteFontColorEditor", QColor(self.TRIPLE_DOUBLE_QUOTE_COLOR))), 7)
        self.lexer.setColor(QColor(settings.value("pythonConsole/defaultFontColorEditor", QColor(self.DEFAULT_COLOR))), 13)
        self.lexer.setFont(font, 1)
        self.lexer.setFont(font, 3)
        self.lexer.setFont(font, 4)
        self.lexer.setFont(font, QsciLexerPython.UnclosedString)

        for style in range(0, 33):
            paperColor = QColor(settings.value("pythonConsole/paperBackgroundColorEditor", QColor(self.BACKGROUND_COLOR)))
            self.lexer.setPaper(paperColor, style)

        self.api = QsciAPIs(self.lexer)

        useDefaultAPI = bool(settings.value('pythonConsole/preloadAPI',
                                            True))
        if useDefaultAPI:
            # Load QGIS API shipped with Python console
            self.api.loadPrepared(
                os.path.join(QgsApplication.pkgDataPath(),
                             'python', 'qsci_apis', 'pyqgis.pap'))
        else:
            # Load user-defined API files
            apiPaths = settings.value('pythonConsole/userAPI', [])
            for path in apiPaths:
                self.api.load(path)
            self.api.prepare()
            self.lexer.setAPIs(self.api)

        self.setLexer(self.lexer)

开发者ID:yoichigmf，项目名称:QGIS，代码行数:101，代码来源:ScriptEdit.py

示例10: ShellScintilla


#.........这里部分代码省略.........
        self._setMinimumHeight()

    def showHistory(self):
        if not self.historyDlg.isVisible():
            self.historyDlg.show()
        self.historyDlg._reloadHistory()
        self.historyDlg.activateWindow()

    def autoCompleteKeyBinding(self):
        radioButtonSource = self.settings.value("pythonConsole/autoCompleteSource", 'fromAPI')
        autoCompEnabled = self.settings.value("pythonConsole/autoCompleteEnabled", True, type=bool)
        if autoCompEnabled:
            if radioButtonSource == 'fromDoc':
                self.autoCompleteFromDocument()
            elif radioButtonSource == 'fromAPI':
                self.autoCompleteFromAPIs()
            elif radioButtonSource == 'fromDocAPI':
                self.autoCompleteFromAll()

    def commandConsole(self, commands):
        if not self.is_cursor_on_last_line():
            self.move_cursor_to_end()
        line, pos = self.getCursorPosition()
        selCmdLenght = len(self.text(line))
        self.setSelection(line, 4, line, selCmdLenght)
        self.removeSelectedText()
        for cmd in commands:
            self.append(cmd)
            self.entered()
        self.move_cursor_to_end()
        self.setFocus()

    def setLexers(self):
        self.lexer = QsciLexerPython()

        loadFont = self.settings.value("pythonConsole/fontfamilytext", "Monospace")
        fontSize = self.settings.value("pythonConsole/fontsize", 10, type=int)

        font = QFont(loadFont)
        font.setFixedPitch(True)
        font.setPointSize(fontSize)
        font.setStyleHint(QFont.TypeWriter)
        font.setStretch(QFont.SemiCondensed)
        font.setLetterSpacing(QFont.PercentageSpacing, 87.0)
        font.setBold(False)

        self.lexer.setDefaultFont(font)
        self.lexer.setDefaultColor(QColor(self.settings.value("pythonConsole/defaultFontColor", QColor(Qt.black))))
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/commentFontColor", QColor(Qt.gray))), 1)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/keywordFontColor", QColor(Qt.darkGreen))), 5)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/classFontColor", QColor(Qt.blue))), 8)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/methodFontColor", QColor(Qt.darkGray))), 9)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/decorFontColor", QColor(Qt.darkBlue))), 15)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/commentBlockFontColor", QColor(Qt.gray))), 12)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/singleQuoteFontColor", QColor(Qt.blue))), 4)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/doubleQuoteFontColor", QColor(Qt.blue))), 3)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/tripleSingleQuoteFontColor", QColor(Qt.blue))), 6)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/tripleDoubleQuoteFontColor", QColor(Qt.blue))), 7)
        self.lexer.setFont(font, 1)
        self.lexer.setFont(font, 3)
        self.lexer.setFont(font, 4)

        for style in range(0, 33):
            paperColor = QColor(self.settings.value("pythonConsole/paperBackgroundColor", QColor(Qt.white)))
            self.lexer.setPaper(paperColor, style)

开发者ID:AM7000000，项目名称:QGIS，代码行数:66，代码来源:console_sci.py

示例11: ShellOutputScintilla


#.........这里部分代码省略.........
        # Reimplemented copy action to prevent paste prompt (>>>,...) in command view
        self.copyShortcut = QShortcut(QKeySequence.Copy, self)
        self.copyShortcut.activated.connect(self.copy)
        self.selectAllShortcut = QShortcut(QKeySequence.SelectAll, self)
        self.selectAllShortcut.activated.connect(self.selectAll)

    def insertInitText(self):
        txtInit = QCoreApplication.translate("PythonConsole",
                                             "Python Console\n"
                                             "Use iface to access QGIS API interface or Type help(iface) for more info\n"
                                             "Security warning: typing commands from an untrusted source can lead to data loss and/or leak")

        # some translation string for the console header ends without '\n'
        # and the first command in console will be appended at the header text.
        # The following code add a '\n' at the end of the string if not present.
        if txtInit.endswith('\n'):
            self.setText(txtInit)
        else:
            self.setText(txtInit + '\n')

    def refreshSettingsOutput(self):
        # Set Python lexer
        self.setLexers()
        self.setSelectionForegroundColor(QColor(self.settings.value("pythonConsole/selectionForegroundColor", QColor(self.SELECTION_FOREGROUND_COLOR))))
        self.setSelectionBackgroundColor(QColor(self.settings.value("pythonConsole/selectionBackgroundColor", QColor(self.SELECTION_BACKGROUND_COLOR))))
        self.setMarginsForegroundColor(QColor(self.settings.value("pythonConsole/marginForegroundColor", QColor(self.MARGIN_FOREGROUND_COLOR))))
        self.setMarginsBackgroundColor(QColor(self.settings.value("pythonConsole/marginBackgroundColor", QColor(self.MARGIN_BACKGROUND_COLOR))))
        caretLineColor = self.settings.value("pythonConsole/caretLineColor", QColor(self.CARET_LINE_COLOR))
        cursorColor = self.settings.value("pythonConsole/cursorColor", QColor(self.CURSOR_COLOR))
        self.setCaretLineBackgroundColor(caretLineColor)
        self.setCaretForegroundColor(cursorColor)

    def setLexers(self):
        self.lexer = QsciLexerPython()

        font = QFontDatabase.systemFont(QFontDatabase.FixedFont)

        loadFont = self.settings.value("pythonConsole/fontfamilytext")
        if loadFont:
            font.setFamily(loadFont)
        fontSize = self.settings.value("pythonConsole/fontsize", type=int)
        if fontSize:
            font.setPointSize(fontSize)

        self.lexer.setDefaultFont(font)
        self.lexer.setDefaultColor(QColor(self.settings.value("pythonConsole/defaultFontColor", QColor(self.DEFAULT_COLOR))))
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/commentFontColor", QColor(self.COMMENT_COLOR))), 1)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/numberFontColor", QColor(self.NUMBER_COLOR))), 2)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/keywordFontColor", QColor(self.KEYWORD_COLOR))), 5)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/classFontColor", QColor(self.CLASS_COLOR))), 8)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/methodFontColor", QColor(self.METHOD_COLOR))), 9)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/decorFontColor", QColor(self.DECORATION_COLOR))), 15)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/commentBlockFontColor", QColor(self.COMMENT_BLOCK_COLOR))), 12)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/singleQuoteFontColor", QColor(self.SINGLE_QUOTE_COLOR))), 4)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/doubleQuoteFontColor", QColor(self.DOUBLE_QUOTE_COLOR))), 3)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/tripleSingleQuoteFontColor", QColor(self.TRIPLE_SINGLE_QUOTE_COLOR))), 6)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/tripleDoubleQuoteFontColor", QColor(self.TRIPLE_DOUBLE_QUOTE_COLOR))), 7)
        self.lexer.setColor(QColor(self.settings.value("pythonConsole/defaultFontColorEditor", QColor(self.DEFAULT_COLOR))), 13)
        self.lexer.setColor(QColor(Qt.red), 14)
        self.lexer.setFont(font, 1)
        self.lexer.setFont(font, 2)
        self.lexer.setFont(font, 3)
        self.lexer.setFont(font, 4)
        self.lexer.setFont(font, QsciLexerPython.UnclosedString)

        for style in range(0, 33):

开发者ID:DelazJ，项目名称:QGIS，代码行数:67，代码来源:console_output.py

示例12: ScriptEdit


#.........这里部分代码省略.........
        self.setAutoCompletionThreshold(2)
        self.setAutoCompletionSource(QsciScintilla.AcsAPIs)

        self.setFonts(10)
        self.initLexer()

    def setFonts(self, size):
        # Load font from Python console settings
        settings = QgsSettings()
        fontName = settings.value('pythonConsole/fontfamilytext', 'Monospace')
        fontSize = int(settings.value('pythonConsole/fontsize', size))

        self.defaultFont = QFont(fontName)
        self.defaultFont.setFixedPitch(True)
        self.defaultFont.setPointSize(fontSize)
        self.defaultFont.setStyleHint(QFont.TypeWriter)
        self.defaultFont.setStretch(QFont.SemiCondensed)
        self.defaultFont.setLetterSpacing(QFont.PercentageSpacing, 87.0)
        self.defaultFont.setBold(False)

        self.boldFont = QFont(self.defaultFont)
        self.boldFont.setBold(True)

        self.italicFont = QFont(self.defaultFont)
        self.italicFont.setItalic(True)

        self.setFont(self.defaultFont)
        self.setMarginsFont(self.defaultFont)

    def initShortcuts(self):
        (ctrl, shift) = (self.SCMOD_CTRL << 16, self.SCMOD_SHIFT << 16)

        # Disable some shortcuts
        self.SendScintilla(QsciScintilla.SCI_CLEARCMDKEY, ord('D') + ctrl)
        self.SendScintilla(QsciScintilla.SCI_CLEARCMDKEY, ord('L') + ctrl)
        self.SendScintilla(QsciScintilla.SCI_CLEARCMDKEY, ord('L') + ctrl +
                           shift)
        self.SendScintilla(QsciScintilla.SCI_CLEARCMDKEY, ord('T') + ctrl)

        # self.SendScintilla(QsciScintilla.SCI_CLEARCMDKEY, ord("Z") + ctrl)
        # self.SendScintilla(QsciScintilla.SCI_CLEARCMDKEY, ord("Y") + ctrl)

        # Use Ctrl+Space for autocompletion
        self.shortcutAutocomplete = QShortcut(QKeySequence(Qt.CTRL +
                                                           Qt.Key_Space), self)
        self.shortcutAutocomplete.setContext(Qt.WidgetShortcut)
        self.shortcutAutocomplete.activated.connect(self.autoComplete)

    def autoComplete(self):
        self.autoCompleteFromAll()

    def initLexer(self):
        self.lexer = QsciLexerPython()

        colorDefault = QColor('#2e3436')
        colorComment = QColor('#c00')
        colorCommentBlock = QColor('#3465a4')
        colorNumber = QColor('#4e9a06')
        colorType = QColor('#4e9a06')
        colorKeyword = QColor('#204a87')
        colorString = QColor('#ce5c00')

        self.lexer.setDefaultFont(self.defaultFont)
        self.lexer.setDefaultColor(colorDefault)

        self.lexer.setColor(colorComment, 1)
        self.lexer.setColor(colorNumber, 2)
        self.lexer.setColor(colorString, 3)
        self.lexer.setColor(colorString, 4)
        self.lexer.setColor(colorKeyword, 5)
        self.lexer.setColor(colorString, 6)
        self.lexer.setColor(colorString, 7)
        self.lexer.setColor(colorType, 8)
        self.lexer.setColor(colorCommentBlock, 12)
        self.lexer.setColor(colorString, 15)

        self.lexer.setFont(self.italicFont, 1)
        self.lexer.setFont(self.boldFont, 5)
        self.lexer.setFont(self.boldFont, 8)
        self.lexer.setFont(self.italicFont, 12)

        self.api = QsciAPIs(self.lexer)

        settings = QgsSettings()
        useDefaultAPI = bool(settings.value('pythonConsole/preloadAPI',
                                            True))
        if useDefaultAPI:
            # Load QGIS API shipped with Python console
            self.api.loadPrepared(
                os.path.join(QgsApplication.pkgDataPath(),
                             'python', 'qsci_apis', 'pyqgis.pap'))
        else:
            # Load user-defined API files
            apiPaths = settings.value('pythonConsole/userAPI', [])
            for path in apiPaths:
                self.api.load(path)
            self.api.prepare()
            self.lexer.setAPIs(self.api)

        self.setLexer(self.lexer)

开发者ID:strk，项目名称:QGIS，代码行数:101，代码来源:ScriptEdit.py

示例13: ShellOutputScintilla

class ShellOutputScintilla(QsciScintilla):

    def __init__(self, parent=None):
        super(ShellOutputScintilla, self).__init__(parent)
        self.parent = parent
        self.shell = self.parent.shell

        self.settings = QSettings()

        # Creates layout for message bar
        self.layout = QGridLayout(self)
        self.layout.setContentsMargins(0, 0, 0, 0)
        spacerItem = QSpacerItem(20, 40, QSizePolicy.Minimum, QSizePolicy.Expanding)
        self.layout.addItem(spacerItem, 1, 0, 1, 1)
        # messageBar instance
        self.infoBar = QgsMessageBar()
        sizePolicy = QSizePolicy(QSizePolicy.Minimum, QSizePolicy.Fixed)
        self.infoBar.setSizePolicy(sizePolicy)
        self.layout.addWidget(self.infoBar, 0, 0, 1, 1)

        # Enable non-ascii chars for editor
        self.setUtf8(True)

        sys.stdout = writeOut(self, sys.stdout)
        sys.stderr = writeOut(self, sys.stderr, "_traceback")

        self.insertInitText()
        self.refreshSettingsOutput()
        self.setReadOnly(True)

        # Set the default font
        font = QFont()
        font.setFamily('Courier')
        font.setFixedPitch(True)
        font.setPointSize(10)
        self.setFont(font)
        self.setMarginsFont(font)
        # Margin 0 is used for line numbers
        self.setMarginWidth(0, 0)
        self.setMarginWidth(1, 0)
        self.setMarginWidth(2, 0)
        #fm = QFontMetrics(font)
        self.setMarginsFont(font)
        self.setMarginWidth(1, "00000")
        self.setMarginLineNumbers(1, True)
        self.setMarginsForegroundColor(QColor("#3E3EE3"))
        self.setMarginsBackgroundColor(QColor("#f9f9f9"))
        self.setCaretLineVisible(True)
        self.setCaretWidth(0)

        self.setMinimumHeight(120)

        self.setWrapMode(QsciScintilla.WrapCharacter)
        self.SendScintilla(QsciScintilla.SCI_SETHSCROLLBAR, 0)

        self.runScut = QShortcut(QKeySequence(Qt.CTRL + Qt.Key_E), self)
        self.runScut.setContext(Qt.WidgetShortcut)
        self.runScut.activated.connect(self.enteredSelected)
        # Reimplemeted copy action to prevent paste prompt (>>>,...) in command view
        self.copyShortcut = QShortcut(QKeySequence.Copy, self)
        self.copyShortcut.activated.connect(self.copy)
        self.selectAllShortcut = QShortcut(QKeySequence.SelectAll, self)
        self.selectAllShortcut.activated.connect(self.selectAll)

    def insertInitText(self):
        txtInit = QCoreApplication.translate("PythonConsole",
                                             "Python Console \n"
                                             "Use iface to access QGIS API interface or Type help(iface) for more info")

        ## some translation string for the console header ends without '\n'
        ## and the first command in console will be appended at the header text.
        ## The following code add a '\n' at the end of the string if not present.
        if txtInit.endswith('\n'):
            self.setText(txtInit)
        else:
            self.setText(txtInit + '\n')

    def refreshSettingsOutput(self):
        # Set Python lexer
        self.setLexers()
        caretLineColor = self.settings.value("pythonConsole/caretLineColor", QColor("#fcf3ed"))
        cursorColor = self.settings.value("pythonConsole/cursorColor", QColor(Qt.black))
        self.setCaretLineBackgroundColor(caretLineColor)
        self.setCaretForegroundColor(cursorColor)

    def setLexers(self):
        self.lexer = QsciLexerPython()

        loadFont = self.settings.value("pythonConsole/fontfamilytext", "Monospace")
        fontSize = self.settings.value("pythonConsole/fontsize", 10, type=int)
        font = QFont(loadFont)
        font.setFixedPitch(True)
        font.setPointSize(fontSize)
        font.setStyleHint(QFont.TypeWriter)
        font.setStretch(QFont.SemiCondensed)
        font.setLetterSpacing(QFont.PercentageSpacing, 87.0)
        font.setBold(False)

        self.lexer.setDefaultFont(font)
        self.lexer.setDefaultColor(QColor(self.settings.value("pythonConsole/defaultFontColor", QColor(Qt.black))))
#.........这里部分代码省略.........

开发者ID:AM7000000，项目名称:QGIS，代码行数:101，代码来源:console_output.py

注：本文中的qgis.PyQt.Qsci.QsciLexerPython类示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

Python Qsci.QsciLexerSQL类代码示例发布时间：2022-05-26

Python Qsci.QsciAPIs类代码示例发布时间：2022-05-26

Python util.grid_equal函数代码示例

1 Python 入门教程

Python入门教程 Python 是一种解释型、面向对象、动态数据类型的高级程序设计语言。 P

阅读：13786|2022-01-22

2 Python wikiutil.getFrontPage函数代码示例

Python wikiutil.getFrontPage函数代码示例

阅读：10177|2022-05-24

3 Python 简介

Python 简介 Python 是一个高层次的结合了解释性、编译性、互动性和面向对象的脚本

阅读：4074|2022-01-22

4 Python tests.group函数代码示例

Python tests.group函数代码示例

阅读：4039|2022-05-27

5 Python util.check_if_user_has_permission

Python util.check_if_user_has_permission函数代码示例

阅读：3831|2022-05-27

6 Python 操练实例98

Python 练习实例98 Python 100例题目：从键盘输入一个字符串，将小写字母全部转换成大

阅读：3508|2022-01-22

7 Python 环境搭建

Python 环境搭建本章节我们将向大家介绍如何在本地搭建 Python 开发环境。 Py

阅读：3029|2022-01-22

8 Python output.darkgreen函数代码示例

Python output.darkgreen函数代码示例

阅读：2645|2022-05-25

9 Python 基础语法

Python 基础语法 Python 语言与 Perl，C 和 Java 等语言有许多相似之处。但是，也

阅读：2635|2022-01-22

10 Python 中文编码

Python 中文编码前面章节中我们已经学会了如何用 Python 输出 Hello, World!，英文没

阅读：2293|2022-01-22

客服电话

电子邮件

Python Qsci.QsciLexerPython类代码示例

示例1: setLexers

示例2: initLexer

示例3: setLexers

示例4: setLexers

示例5: initLexer

示例6: setLexers

示例7: setLexers

示例8: setLexers

示例9: ScriptEdit

示例10: ShellScintilla

示例11: ShellOutputScintilla

示例12: ScriptEdit

示例13: ShellOutputScintilla

请发表评论

全部评论

上一篇：

下一篇：

Python util.grid_equal函数代码示例

Python util.get_worker_name函数代码示例

Python util.get_webmention_target函数代

Python util.get_uuid函数代码示例

Python util.get_type_by_name函数代码示例

Python util.grid_equal函数代码示例

Python util.get_worker_name函数代码示例

Python util.get_webmention_target函数代

Python util.get_uuid函数代码示例

Python util.get_type_by_name函数代码示例

Python util.get_stdout函数代码示例

关于我们

产品与服务

解决方案

139-2527-9053