Python core.QgsMapRendererCache类代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› Python›Python编程经验

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Python中qgis.core.QgsMapRendererCache类的典型用法代码示例。如果您正苦于以下问题：Python QgsMapRendererCache类的具体用法？Python QgsMapRendererCache怎么用？Python QgsMapRendererCache使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。

在下文中一共展示了QgsMapRendererCache类的10个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Python代码示例。

示例1: testRequestRepaintSimple

    def testRequestRepaintSimple(self):
        """ test requesting repaint with a single dependent layer """
        layer = QgsVectorLayer("Point?field=fldtxt:string",
                               "layer", "memory")
        QgsProject.instance().addMapLayers([layer])
        self.assertTrue(layer.isValid())

        # add image to cache
        cache = QgsMapRendererCache()
        im = QImage(200, 200, QImage.Format_RGB32)
        cache.setCacheImage('xxx', im, [layer])
        self.assertFalse(cache.cacheImage('xxx').isNull())
        self.assertTrue(cache.hasCacheImage('xxx'))

        # trigger repaint on layer
        layer.triggerRepaint()
        # cache image should be cleared
        self.assertTrue(cache.cacheImage('xxx').isNull())
        self.assertFalse(cache.hasCacheImage('xxx'))
        QgsProject.instance().removeMapLayer(layer.id())

        # test that cache is also cleared on deferred update
        layer = QgsVectorLayer("Point?field=fldtxt:string",
                               "layer", "memory")
        cache.setCacheImage('xxx', im, [layer])
        layer.triggerRepaint(True)
        self.assertFalse(cache.hasCacheImage('xxx'))

开发者ID:aaime，项目名称:QGIS，代码行数:27，代码来源:test_qgsmaprenderercache.py

示例2: checkAddingNewLabeledLayerInvalidatesLabelCache

    def checkAddingNewLabeledLayerInvalidatesLabelCache(self, job_type):
        """ adding a new labeled layer should invalidate any previous label caches"""
        layer = QgsVectorLayer("Point?field=fldtxt:string",
                               "layer1", "memory")

        layer.setCustomProperty("labeling", "pal")
        layer.setCustomProperty("labeling/enabled", True)
        layer.setCustomProperty("labeling/fieldName", "fldtxt")

        settings = QgsMapSettings()
        settings.setExtent(QgsRectangle(5, 25, 25, 45))
        settings.setOutputSize(QSize(600, 400))
        settings.setLayers([layer])

        # with cache - first run should populate cache
        cache = QgsMapRendererCache()
        job = job_type(settings)
        job.setCache(cache)
        job.start()
        job.waitForFinished()
        self.assertFalse(job.usedCachedLabels())
        self.assertTrue(cache.hasCacheImage('_labels_'))
        self.assertTrue(job.takeLabelingResults())

        self.assertEqual(cache.dependentLayers('_labels_'), [layer])

        # add another labeled layer
        layer2 = QgsVectorLayer("Point?field=fldtxt:string",
                                "layer2", "memory")
        layer2.setCustomProperty("labeling", "pal")
        layer2.setCustomProperty("labeling/enabled", True)
        layer2.setCustomProperty("labeling/fieldName", "fldtxt")
        settings.setLayers([layer, layer2])

        # second job should not be able to use label cache, since a new layer was added
        job = job_type(settings)
        job.setCache(cache)
        job.start()
        job.waitForFinished()
        # shouldn't use cache
        self.assertFalse(job.usedCachedLabels())
        # but results should have been cached
        self.assertTrue(cache.hasCacheImage('_labels_'))
        self.assertEqual(set(cache.dependentLayers('_labels_')), {layer, layer2})
        self.assertTrue(job.takeLabelingResults())

开发者ID:wongjimsan，项目名称:QGIS，代码行数:45，代码来源:test_qgsmaprenderer.py

示例3: checkRemovingNonLabeledLayerKeepsLabelCache

    def checkRemovingNonLabeledLayerKeepsLabelCache(self, job_type):
        """ removing a previously used non-labeled layer should keep any previous label caches"""
        layer = QgsVectorLayer("Point?field=fldtxt:string",
                               "layer1", "memory")

        layer.setCustomProperty("labeling", "pal")
        layer.setCustomProperty("labeling/enabled", True)
        layer.setCustomProperty("labeling/fieldName", "fldtxt")

        layer2 = QgsVectorLayer("Point?field=fldtxt:string",
                                "layer2", "memory")

        settings = QgsMapSettings()
        settings.setExtent(QgsRectangle(5, 25, 25, 45))
        settings.setOutputSize(QSize(600, 400))
        settings.setLayers([layer, layer2])

        # with cache - first run should populate cache
        cache = QgsMapRendererCache()
        job = job_type(settings)
        job.setCache(cache)
        job.start()
        job.waitForFinished()
        self.assertFalse(job.usedCachedLabels())
        self.assertTrue(cache.hasCacheImage('_labels_'))
        self.assertTrue(job.takeLabelingResults())

        self.assertEqual(set(cache.dependentLayers('_labels_')), {layer})

        # remove a previously labeled layer
        settings.setLayers([layer])

        # second job should be able to use label cache, since only a non-labeled layer was removed
        job = job_type(settings)
        job.setCache(cache)
        job.start()
        job.waitForFinished()
        # should use cache
        self.assertTrue(job.usedCachedLabels())
        # results should have been cached
        self.assertTrue(cache.hasCacheImage('_labels_'))
        self.assertEqual(set(cache.dependentLayers('_labels_')), {layer})
        self.assertTrue(job.takeLabelingResults())

开发者ID:wongjimsan，项目名称:QGIS，代码行数:43，代码来源:test_qgsmaprenderer.py

示例4: checkLabeledLayerWithBlendModesCannotBeCached

    def checkLabeledLayerWithBlendModesCannotBeCached(self, job_type):
        """ any labeled layer utilising blending modes cannot be cached"""
        layer = QgsVectorLayer("Point?field=fldtxt:string",
                               "layer1", "memory")

        layer.setCustomProperty("labeling", "pal")
        layer.setCustomProperty("labeling/enabled", True)
        layer.setCustomProperty("labeling/fieldName", "fldtxt")

        layer2 = QgsVectorLayer("Point?field=fldtxt:string",
                                "layer2", "memory")
        layer2.setCustomProperty("labeling", "pal")
        layer2.setCustomProperty("labeling/enabled", True)
        layer2.setCustomProperty("labeling/fieldName", "fldtxt")
        layer2.setCustomProperty("labeling/blendMode", 5)

        settings = QgsMapSettings()
        settings.setExtent(QgsRectangle(5, 25, 25, 45))
        settings.setOutputSize(QSize(600, 400))
        settings.setLayers([layer, layer2])

        # with cache - cache should not be populated!
        cache = QgsMapRendererCache()
        job = job_type(settings)
        job.setCache(cache)
        job.start()
        job.waitForFinished()
        self.assertFalse(job.usedCachedLabels())
        self.assertFalse(cache.hasCacheImage('_labels_'))
        self.assertTrue(job.takeLabelingResults())

        # second job should also not be able to use label cache
        job = job_type(settings)
        job.setCache(cache)
        job.start()
        job.waitForFinished()
        # shouldn't use cache
        self.assertFalse(job.usedCachedLabels())
        # and results should not have been cached
        self.assertFalse(cache.hasCacheImage('_labels_'))
        self.assertTrue(job.takeLabelingResults())

开发者ID:wongjimsan，项目名称:QGIS，代码行数:41，代码来源:test_qgsmaprenderer.py

示例5: testDependentLayers

    def testDependentLayers(self):
        # bad layer tests
        cache = QgsMapRendererCache()
        self.assertEqual(cache.dependentLayers('not a layer'), [])

        layer1 = QgsVectorLayer("Point?field=fldtxt:string",
                                "layer1", "memory")
        layer2 = QgsVectorLayer("Point?field=fldtxt:string",
                                "layer2", "memory")

        im = QImage(200, 200, QImage.Format_RGB32)
        cache.setCacheImage('no depends', im, [])
        self.assertEqual(cache.dependentLayers('no depends'), [])
        cache.setCacheImage('depends', im, [layer1, layer2])
        self.assertEqual(set(cache.dependentLayers('depends')), set([layer1, layer2]))

开发者ID:aaime，项目名称:QGIS，代码行数:15，代码来源:test_qgsmaprenderercache.py

示例6: testClearOnLayerAutoRefresh

    def testClearOnLayerAutoRefresh(self):
        """ test that cache is cleared when layer auto refresh is triggered """
        cache = QgsMapRendererCache()
        layer1 = QgsVectorLayer("Point?field=fldtxt:string",
                                "layer1", "memory")
        im = QImage(200, 200, QImage.Format_RGB32)
        cache.setCacheImage('l1', im, [layer1])
        self.assertTrue(cache.hasCacheImage('l1'))

        layer1.setAutoRefreshInterval(100)
        layer1.setAutoRefreshEnabled(True)
        self.assertTrue(cache.hasCacheImage('l1'))

        # wait a second...
        sleep(1)
        QCoreApplication.processEvents()
        # cache should be cleared
        self.assertFalse(cache.hasCacheImage('l1'))

开发者ID:aaime，项目名称:QGIS，代码行数:18，代码来源:test_qgsmaprenderercache.py

示例7: testInit

    def testInit(self):
        cache = QgsMapRendererCache()
        extent = QgsRectangle(1, 2, 3, 4)
        self.assertFalse(cache.init(extent, 1000))

        # add a cache image
        im = QImage(200, 200, QImage.Format_RGB32)
        cache.setCacheImage('layer', im)
        self.assertFalse(cache.cacheImage('layer').isNull())
        self.assertTrue(cache.hasCacheImage('layer'))

        # re init, without changing extent or scale
        self.assertTrue(cache.init(extent, 1000))

        # image should still be in cache
        self.assertFalse(cache.cacheImage('layer').isNull())
        self.assertTrue(cache.hasCacheImage('layer'))

        # reinit with different scale
        self.assertFalse(cache.init(extent, 2000))
        # cache should be cleared
        self.assertTrue(cache.cacheImage('layer').isNull())
        self.assertFalse(cache.hasCacheImage('layer'))

        # readd image to cache
        cache.setCacheImage('layer', im)
        self.assertFalse(cache.cacheImage('layer').isNull())
        self.assertTrue(cache.hasCacheImage('layer'))

        # change extent
        self.assertFalse(cache.init(QgsRectangle(11, 12, 13, 14), 2000))
        # cache should be cleared
        self.assertTrue(cache.cacheImage('layer').isNull())
        self.assertFalse(cache.hasCacheImage('layer'))

开发者ID:aaime，项目名称:QGIS，代码行数:34，代码来源:test_qgsmaprenderercache.py

示例8: testSetCacheImages

    def testSetCacheImages(self):
        cache = QgsMapRendererCache()
        # not set image
        im = cache.cacheImage('littlehands')
        self.assertTrue(im.isNull())
        self.assertFalse(cache.hasCacheImage('littlehands'))

        # set image
        im = QImage(200, 200, QImage.Format_RGB32)
        cache.setCacheImage('littlehands', im)
        self.assertFalse(im.isNull())
        self.assertEqual(cache.cacheImage('littlehands'), im)
        self.assertTrue(cache.hasCacheImage('littlehands'))

        # test another not set image when cache has images
        self.assertTrue(cache.cacheImage('bad').isNull())
        self.assertFalse(cache.hasCacheImage('bad'))

        # clear cache image
        cache.clearCacheImage('not in cache')  # no crash!
        cache.clearCacheImage('littlehands')
        im = cache.cacheImage('littlehands')
        self.assertTrue(im.isNull())
        self.assertFalse(cache.hasCacheImage('littlehands'))

        # clear whole cache
        im = QImage(200, 200, QImage.Format_RGB32)
        cache.setCacheImage('littlehands', im)
        self.assertFalse(im.isNull())
        self.assertTrue(cache.hasCacheImage('littlehands'))
        cache.clear()
        im = cache.cacheImage('littlehands')
        self.assertTrue(im.isNull())
        self.assertFalse(cache.hasCacheImage('littlehands'))

开发者ID:aaime，项目名称:QGIS，代码行数:34，代码来源:test_qgsmaprenderercache.py

示例9: testLayerRemoval

    def testLayerRemoval(self):
        """test that cached image is cleared when a dependent layer is removed"""
        cache = QgsMapRendererCache()
        layer1 = QgsVectorLayer("Point?field=fldtxt:string",
                                "layer1", "memory")
        layer2 = QgsVectorLayer("Point?field=fldtxt:string",
                                "layer2", "memory")
        im = QImage(200, 200, QImage.Format_RGB32)
        cache.setCacheImage('depends', im, [layer1, layer2])
        cache.setCacheImage('depends2', im, [layer1])
        cache.setCacheImage('depends3', im, [layer2])
        cache.setCacheImage('no depends', im, [])
        self.assertTrue(cache.hasCacheImage('depends'))
        self.assertTrue(cache.hasCacheImage('depends2'))
        self.assertTrue(cache.hasCacheImage('depends3'))
        self.assertTrue(cache.hasCacheImage('no depends'))

        # try deleting a layer
        layer2 = None
        self.assertFalse(cache.hasCacheImage('depends'))
        self.assertTrue(cache.hasCacheImage('depends2'))
        self.assertFalse(cache.hasCacheImage('depends3'))
        self.assertTrue(cache.hasCacheImage('no depends'))

        layer1 = None
        self.assertFalse(cache.hasCacheImage('depends'))
        self.assertFalse(cache.hasCacheImage('depends2'))
        self.assertFalse(cache.hasCacheImage('depends3'))
        self.assertTrue(cache.hasCacheImage('no depends'))

开发者ID:aaime，项目名称:QGIS，代码行数:29，代码来源:test_qgsmaprenderercache.py

示例10: testRequestRepaintMultiple

    def testRequestRepaintMultiple(self):
        """ test requesting repaint with multiple dependent layers """
        layer1 = QgsVectorLayer("Point?field=fldtxt:string",
                                "layer1", "memory")
        layer2 = QgsVectorLayer("Point?field=fldtxt:string",
                                "layer2", "memory")
        QgsProject.instance().addMapLayers([layer1, layer2])
        self.assertTrue(layer1.isValid())
        self.assertTrue(layer2.isValid())

        # add image to cache - no dependent layers
        cache = QgsMapRendererCache()
        im1 = QImage(200, 200, QImage.Format_RGB32)
        cache.setCacheImage('nolayer', im1)
        self.assertFalse(cache.cacheImage('nolayer').isNull())
        self.assertTrue(cache.hasCacheImage('nolayer'))

        # trigger repaint on layer
        layer1.triggerRepaint()
        layer1.triggerRepaint()  # do this a couple of times - we don't want errors due to multiple disconnects, etc
        layer2.triggerRepaint()
        layer2.triggerRepaint()
        # cache image should still exist - it's not dependent on layers
        self.assertFalse(cache.cacheImage('nolayer').isNull())
        self.assertTrue(cache.hasCacheImage('nolayer'))

        # image depends on 1 layer
        im_l1 = QImage(200, 200, QImage.Format_RGB32)
        cache.setCacheImage('im1', im_l1, [layer1])

        # image depends on 2 layers
        im_l1_l2 = QImage(200, 200, QImage.Format_RGB32)
        cache.setCacheImage('im1_im2', im_l1_l2, [layer1, layer2])

        # image depends on 2nd layer alone
        im_l2 = QImage(200, 200, QImage.Format_RGB32)
        cache.setCacheImage('im2', im_l2, [layer2])

        self.assertFalse(cache.cacheImage('im1').isNull())
        self.assertTrue(cache.hasCacheImage('im1'))
        self.assertFalse(cache.cacheImage('im1_im2').isNull())
        self.assertTrue(cache.hasCacheImage('im1_im2'))
        self.assertFalse(cache.cacheImage('im2').isNull())
        self.assertTrue(cache.hasCacheImage('im2'))

        # trigger repaint layer 1 (check twice - don't want disconnect errors)
        for i in range(2):
            layer1.triggerRepaint()
            # should be cleared
            self.assertTrue(cache.cacheImage('im1').isNull())
            self.assertFalse(cache.hasCacheImage('im1'))
            self.assertTrue(cache.cacheImage('im1_im2').isNull())
            self.assertFalse(cache.hasCacheImage('im1_im2'))
            # should be retained
            self.assertTrue(cache.hasCacheImage('im2'))
            self.assertFalse(cache.cacheImage('im2').isNull())
            self.assertEqual(cache.cacheImage('im2'), im_l2)
            self.assertTrue(cache.hasCacheImage('nolayer'))
            self.assertFalse(cache.cacheImage('nolayer').isNull())
            self.assertEqual(cache.cacheImage('nolayer'), im1)

        # trigger repaint layer 2
        for i in range(2):
            layer2.triggerRepaint()
            # should be cleared
            self.assertFalse(cache.hasCacheImage('im1'))
            self.assertTrue(cache.cacheImage('im1').isNull())
            self.assertFalse(cache.hasCacheImage('im1_im2'))
            self.assertTrue(cache.cacheImage('im1_im2').isNull())
            self.assertFalse(cache.hasCacheImage('im2'))
            self.assertTrue(cache.cacheImage('im2').isNull())
            # should be retained
            self.assertTrue(cache.hasCacheImage('nolayer'))
            self.assertFalse(cache.cacheImage('nolayer').isNull())
            self.assertEqual(cache.cacheImage('nolayer'), im1)

开发者ID:aaime，项目名称:QGIS，代码行数:75，代码来源:test_qgsmaprenderercache.py

注：本文中的qgis.core.QgsMapRendererCache类示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

Python core.QgsMapRendererCustomPainterJob类代码示例发布时间：2022-05-26

Python core.QgsMapRenderer类代码示例发布时间：2022-05-26

Python util.grid_equal函数代码示例

1 Python 入门教程

Python入门教程 Python 是一种解释型、面向对象、动态数据类型的高级程序设计语言。 P

阅读：13787|2022-01-22

2 Python wikiutil.getFrontPage函数代码示例

Python wikiutil.getFrontPage函数代码示例

阅读：10177|2022-05-24

3 Python 简介

Python 简介 Python 是一个高层次的结合了解释性、编译性、互动性和面向对象的脚本

阅读：4074|2022-01-22

4 Python tests.group函数代码示例

Python tests.group函数代码示例

阅读：4039|2022-05-27

5 Python util.check_if_user_has_permission

Python util.check_if_user_has_permission函数代码示例

阅读：3832|2022-05-27

6 Python 操练实例98

Python 练习实例98 Python 100例题目：从键盘输入一个字符串，将小写字母全部转换成大

阅读：3508|2022-01-22

7 Python 环境搭建

Python 环境搭建本章节我们将向大家介绍如何在本地搭建 Python 开发环境。 Py

阅读：3029|2022-01-22

8 Python output.darkgreen函数代码示例

Python output.darkgreen函数代码示例

阅读：2646|2022-05-25

9 Python 基础语法

Python 基础语法 Python 语言与 Perl，C 和 Java 等语言有许多相似之处。但是，也

阅读：2636|2022-01-22

10 Python 中文编码

Python 中文编码前面章节中我们已经学会了如何用 Python 输出 Hello, World!，英文没

阅读：2293|2022-01-22

客服电话

电子邮件

Python core.QgsMapRendererCache类代码示例

示例1: testRequestRepaintSimple

示例2: checkAddingNewLabeledLayerInvalidatesLabelCache

示例3: checkRemovingNonLabeledLayerKeepsLabelCache

示例4: checkLabeledLayerWithBlendModesCannotBeCached

示例5: testDependentLayers

示例6: testClearOnLayerAutoRefresh

示例7: testInit

示例8: testSetCacheImages

示例9: testLayerRemoval

示例10: testRequestRepaintMultiple

请发表评论

全部评论

上一篇：

下一篇：

Python util.grid_equal函数代码示例

Python util.get_worker_name函数代码示例

Python util.get_webmention_target函数代

Python util.get_uuid函数代码示例

Python util.get_type_by_name函数代码示例

Python util.grid_equal函数代码示例

Python util.get_worker_name函数代码示例

Python util.get_webmention_target函数代

Python util.get_uuid函数代码示例

Python util.get_type_by_name函数代码示例

Python util.get_stdout函数代码示例

关于我们

产品与服务

解决方案

139-2527-9053