def read_from_qgis_native(self, qgis_layer):
        """Read raster data from qgis layer QgsRasterLayer.

            A stub is used now:
                save all data in a file,
                then call safe.read_from_file

            Raises:
                * TypeError         if qgis is not avialable
                * IOError           if can't store temporary file
                * GetDataError      if can't create copy of qgis_layer's
                                        dataProvider
        """
        base_name = unique_filename()
        file_name = base_name + '.tif'

        file_writer = QgsRasterFileWriter(file_name)
        pipe = QgsRasterPipe()
        provider = qgis_layer.dataProvider()
        if not pipe.set(provider.clone()):
            msg = "Cannot set pipe provider"
            raise GetDataError(msg)

        file_writer.writeRaster(
            pipe,
            provider.xSize(),
            provider.ySize(),
            provider.extent(),
            provider.crs())

        # Write keywords if any
        write_keywords(self.keywords, base_name + '.keywords')
        self.read_from_file(file_name)

def clip_raster(raster, column_count, row_count, output_extent):
    """Clip raster to specified extent, width and height.

    Note there is similar utility in safe_qgis.utilities.clipper, but it uses
    gdal whereas this one uses native QGIS.

    :param raster: Raster
    :type raster: QgsRasterLayer

    :param column_count: Desired width in pixels of new raster
    :type column_count: Int

    :param row_count: Desired height in pixels of new raster
    :type row_count: Int

    :param output_extent: Extent of the clipped region
    :type output_extent: QgsRectangle

    :returns: Clipped region of the raster
    :rtype: QgsRasterLayer
    """
    provider = raster.dataProvider()
    pipe = QgsRasterPipe()
    pipe.set(provider.clone())

    base_name = unique_filename()
    file_name = base_name + ".tif"
    file_writer = QgsRasterFileWriter(file_name)
    file_writer.writeRaster(pipe, column_count, row_count, output_extent, raster.crs())

    return QgsRasterLayer(file_name, "clipped_raster")

 def raster_to_file(self, layer, filename):
     '''
     write the contents of the raster-layer to a file (tif)
     '''
     extent = layer.extent()
     width, height = layer.width(), layer.height()
     
     pipe = QgsRasterPipe()
     # setting renderer leads to export as rendered image (strange: causes conversion from grayscale to multicolor with 4 bands)
     # else raw data is written (in grayscale)
     #renderer = layer.renderer()
     provider = layer.dataProvider()
     
     #pipe.set(renderer.clone())
     pipe.set(provider.clone())
     
     # another possible way to pipe (take the referenced one), references the renderer as well 
     # -> causes wrong color bands while exporting (see some lines above)
     #pipe = layer.pipe()
     
     file_writer = QgsRasterFileWriter(filename)
     
     file_writer.writeRaster(pipe,
                             width,
                             height,
                             extent,
                             layer.crs())           

    def _add_raster_layer(self, raster_layer, layer_name, save_style=False):
        """Add a raster layer to the folder.

        :param raster_layer: The layer to add.
        :type raster_layer: QgsRasterLayer

        :param layer_name: The name of the layer in the datastore.
        :type layer_name: str

        :param save_style: If we have to save a QML too. Default to False.
        :type save_style: bool

        :returns: A two-tuple. The first element will be True if we could add
            the layer to the datastore. The second element will be the layer
            name which has been used or the error message.
        :rtype: (bool, str)

        .. versionadded:: 4.0
        """
        if not self.is_writable():
            return False, 'The destination is not writable.'

        output = QFileInfo(self.uri.filePath(layer_name + '.tif'))

        source = QFileInfo(raster_layer.source())
        if source.exists() and source.suffix() in ['tiff', 'tif']:
            # If it's tiff file based.
            QFile.copy(source.absoluteFilePath(), output.absoluteFilePath())

        else:
            # If it's not file based.
            renderer = raster_layer.renderer()
            provider = raster_layer.dataProvider()
            crs = raster_layer.crs()

            pipe = QgsRasterPipe()
            pipe.set(provider.clone())
            pipe.set(renderer.clone())

            file_writer = QgsRasterFileWriter(output.absoluteFilePath())
            file_writer.Mode(1)

            file_writer.writeRaster(
                pipe,
                provider.xSize(),
                provider.ySize(),
                provider.extent(),
                crs)

            del file_writer

        if save_style:
            style_path = QFileInfo(self.uri.filePath(layer_name + '.qml'))
            raster_layer.saveNamedStyle(style_path.absoluteFilePath())

        assert output.exists()
        return True, output.baseName()

 def testDriverForExtension(self):
     self.assertEqual(QgsRasterFileWriter.driverForExtension('tif'), 'GTiff')
     self.assertEqual(QgsRasterFileWriter.driverForExtension('TIF'), 'GTiff')
     self.assertEqual(QgsRasterFileWriter.driverForExtension('tIf'), 'GTiff')
     self.assertEqual(QgsRasterFileWriter.driverForExtension('.tif'), 'GTiff')
     self.assertEqual(QgsRasterFileWriter.driverForExtension('img'), 'HFA')
     self.assertEqual(QgsRasterFileWriter.driverForExtension('.vrt'), 'VRT')
     self.assertEqual(QgsRasterFileWriter.driverForExtension('.jpg'), 'JPEG')
     self.assertEqual(QgsRasterFileWriter.driverForExtension('asc'), 'AAIGrid')
     self.assertEqual(QgsRasterFileWriter.driverForExtension('not a format'), '')
     self.assertEqual(QgsRasterFileWriter.driverForExtension(''), '')

def getFileFilter(param):
    """
    Returns a suitable file filter pattern for the specified parameter definition
    :param param:
    :return:
    """
    if param.type() == 'layer':
        vectors = QgsProviderRegistry.instance().fileVectorFilters().split(';;')
        vectors.pop(0)
        rasters = QgsProviderRegistry.instance().fileRasterFilters().split(';;')
        rasters.pop(0)
        filters = set(vectors + rasters)
        filters = sorted(filters)
        return tr('All files (*.*)') + ';;' + ";;".join(filters)
    elif param.type() == 'multilayer':
        if param.layerType() == QgsProcessing.TypeRaster:
            exts = QgsRasterFileWriter.supportedFormatExtensions()
        elif param.layerType() == QgsProcessing.TypeFile:
            return tr('All files (*.*)', 'QgsProcessingParameterMultipleLayers')
        else:
            exts = QgsVectorFileWriter.supportedFormatExtensions()
        for i in range(len(exts)):
            exts[i] = tr('{0} files (*.{1})', 'QgsProcessingParameterMultipleLayers').format(exts[i].upper(), exts[i].lower())
        return tr('All files (*.*)') + ';;' + ';;'.join(exts)
    elif param.type() == 'raster':
        return QgsProviderRegistry.instance().fileRasterFilters()
    elif param.type() == 'rasterDestination':
        if param.provider() is not None:
            exts = param.provider().supportedOutputRasterLayerExtensions()
        else:
            exts = QgsRasterFileWriter.supportedFormatExtensions()
        for i in range(len(exts)):
            exts[i] = tr('{0} files (*.{1})', 'ParameterRaster').format(exts[i].upper(), exts[i].lower())
        return ';;'.join(exts) + ';;' + tr('All files (*.*)')
    elif param.type() in ('sink', 'vectorDestination'):
        if param.provider() is not None:
            exts = param.provider().supportedOutputVectorLayerExtensions()
        else:
            exts = QgsVectorFileWriter.supportedFormatExtensions()
        for i in range(len(exts)):
            exts[i] = tr('{0} files (*.{1})', 'ParameterVector').format(exts[i].upper(), exts[i].lower())
        return ';;'.join(exts) + ';;' + tr('All files (*.*)')
    elif param.type() == 'source':
        return QgsProviderRegistry.instance().fileVectorFilters()
    elif param.type() == 'vector':
        return QgsProviderRegistry.instance().fileVectorFilters()
    elif param.type() == 'fileDestination':
        return param.fileFilter() + ';;' + tr('All files (*.*)')

    if param.defaultFileExtension():
        return tr('Default extension') + ' (*.' + param.defaultFileExtension() + ')'
    else:
        return ''

    def testSupportedFiltersAndFormat(self):
        # test with formats in recommended order
        formats = QgsRasterFileWriter.supportedFiltersAndFormats(QgsRasterFileWriter.SortRecommended)
        self.assertEqual(formats[0].filterString, 'GeoTIFF (*.tif *.TIF *.tiff *.TIFF)')
        self.assertEqual(formats[0].driverName, 'GTiff')
        self.assertTrue('netCDF' in [f.driverName for f in formats])

        # alphabetical sorting
        formats2 = QgsRasterFileWriter.supportedFiltersAndFormats(QgsRasterFileWriter.RasterFormatOptions())
        self.assertTrue(formats2[0].driverName < formats2[1].driverName)
        self.assertCountEqual([f.driverName for f in formats], [f.driverName for f in formats2])
        self.assertNotEqual(formats2[0].driverName, 'GTiff')

    def testSupportedFormatExtensions(self):
        formats = QgsRasterFileWriter.supportedFormatExtensions()
        self.assertTrue('tif' in formats)
        self.assertFalse('exe' in formats)
        self.assertEqual(formats[0], 'tif')
        self.assertTrue('nc' in formats)

        # alphabetical sorting
        formats2 = QgsRasterFileWriter.supportedFormatExtensions(QgsRasterFileWriter.RasterFormatOptions())
        self.assertTrue(formats2[1] < formats2[2])
        self.assertCountEqual(formats, formats2)
        self.assertNotEqual(formats2[0], 'tif')

    def run_raster_upload(self):
        # The selected layer should be a raster layer.
        layer = self.iface.activeLayer()
        if not isinstance(layer, QgsRasterLayer):
            pop_up_info("Error: you must select the raster layer")
            return

        fd, tiff_filename = tempfile.mkstemp(suffix='.tiff')
        os.close(fd)
        # ^^^ We just want the filename, not the opened file descriptor.

        provider = layer.dataProvider()
        pipe = QgsRasterPipe()
        pipe.set(provider.clone())
        file_writer = QgsRasterFileWriter(tiff_filename)
        file_writer.writeRaster(pipe,
                                provider.xSize(),
                                provider.ySize(),
                                provider.extent(),
                                provider.crs())
        # http://build-failed.blogspot.nl/2014/12/splitting-vector-and-raster-files-in.html
        # print(tiff_filename)

        # Optionally TODO: grab title from dialog.
        title = "Uploaded by the qgis plugin on %s" % (
            datetime.datetime.now().isoformat())

        form = urllib2_upload.MultiPartForm()
        form.add_field('title', title)
        form.add_field('organisation_id', str(self.selected_organisation))
        filename = os.path.basename(tiff_filename)
        form.add_file('raster_file', filename, fileHandle=open(tiff_filename, 'rb'))

        request = urllib2.Request('https://ggmn.un-igrac.org/upload_raster/')
        request.add_header('User-agent', 'qgis ggmn uploader')
        request.add_header('username', self.username)
        request.add_header('password', self.password)
        body = str(form)
        request.add_header('Content-type', form.get_content_type())
        request.add_header('Content-length', len(body))
        # print("content-length: %s" % len(body))
        request.add_data(body)

        fd2, logfile = tempfile.mkstemp(prefix="uploadlog", suffix=".txt")
        open(logfile, 'w').write(request.get_data())
        # print("Printed what we'll send to %s" % logfile)

        answer = urllib2.urlopen(request).read()
        # print(answer)
        # print("Uploaded geotiff to the server")
        pop_up_info("Uploaded geotiff to the server")

def polygonize_gdal(
        raster,
        threshold_min=0.0,
        threshold_max=float('inf')):
    """
    Function to polygonize raster. Areas (pixels) with threshold_min <
    pixel_values < threshold_max will be converted to polygons.

    :param raster:  Raster layer
    :type raster: QgsRasterLayer

    :param threshold_min: Value that splits raster to flooded or not flooded.
    :type threshold_min: float

    :param threshold_max: Value that splits raster to flooded or not flooded.
    :type threshold_max: float

    :returns: Polygonal geometry
    :rtype: QgsGeometry
    """

    # save qgis raster to disk
    base_name = unique_filename()
    file_name = base_name + '.tif'
    file_writer = QgsRasterFileWriter(file_name)
    pipe = QgsRasterPipe()
    provider = raster.dataProvider()
    if not pipe.set(provider.clone()):
        msg = "Cannot set pipe provider"
        raise GetDataError(msg)
    file_writer.writeRaster(
        pipe,
        provider.xSize(),
        provider.ySize(),
        provider.extent(),
        provider.crs())

    (
        inside_file_name,
        inside_layer_name,
        outside_file_name,
        outside_layer_name
    ) = polygonize_thresholds(file_name, threshold_min, threshold_max)
    inside_layer = \
        QgsVectorLayer(inside_file_name, inside_layer_name, 'ogr')
    outside_layer = \
        QgsVectorLayer(outside_file_name, outside_layer_name, 'ogr')
    if inside_layer.featureCount() == 0:
        return None, None
    else:
        return inside_layer, outside_layer

    def getConsoleCommands(self, parameters, context, feedback, executing=True):
        ogrLayer, layerName = self.getOgrCompatibleSource(self.INPUT, parameters, context, feedback, executing)

        arguments = ['-l']
        arguments.append(layerName)

        fieldName = self.parameterAsString(parameters, self.Z_FIELD, context)
        if fieldName:
            arguments.append('-zfield')
            arguments.append(fieldName)

        params = 'nearest'
        params += ':radius1={}'.format(self.parameterAsDouble(parameters, self.RADIUS_1, context))
        params += ':radius2={}'.format(self.parameterAsDouble(parameters, self.RADIUS_2, context))
        params += ':angle={}'.format(self.parameterAsDouble(parameters, self.ANGLE, context))
        params += ':nodata={}'.format(self.parameterAsDouble(parameters, self.NODATA, context))

        arguments.append('-a')
        arguments.append(params)
        arguments.append('-ot')
        arguments.append(self.TYPES[self.parameterAsEnum(parameters, self.DATA_TYPE, context)])

        out = self.parameterAsOutputLayer(parameters, self.OUTPUT, context)
        self.setOutputValue(self.OUTPUT, out)
        arguments.append('-of')
        arguments.append(QgsRasterFileWriter.driverForExtension(os.path.splitext(out)[1]))

        options = self.parameterAsString(parameters, self.OPTIONS, context)
        if options:
            arguments.extend(GdalUtils.parseCreationOptions(options))

        arguments.append(ogrLayer)
        arguments.append(out)

        return [self.commandName(), GdalUtils.escapeAndJoin(arguments)]

    def getConsoleCommands(self, parameters, context, feedback, executing=True):
        arguments = ['aspect']
        inLayer = self.parameterAsRasterLayer(parameters, self.INPUT, context)
        if inLayer is None:
            raise QgsProcessingException(self.invalidRasterError(parameters, self.INPUT))
        arguments.append(inLayer.source())

        out = self.parameterAsOutputLayer(parameters, self.OUTPUT, context)
        arguments.append(out)
        self.setOutputValue(self.OUTPUT, out)

        arguments.append('-of')
        arguments.append(QgsRasterFileWriter.driverForExtension(os.path.splitext(out)[1]))

        arguments.append('-b')
        arguments.append(str(self.parameterAsInt(parameters, self.BAND, context)))

        if self.parameterAsBoolean(parameters, self.TRIG_ANGLE, context):
            arguments.append('-trigonometric')

        if self.parameterAsBoolean(parameters, self.ZERO_FLAT, context):
            arguments.append('-zero_for_flat')

        if self.parameterAsBoolean(parameters, self.COMPUTE_EDGES, context):
            arguments.append('-compute_edges')

        if self.parameterAsBoolean(parameters, self.ZEVENBERGEN, context):
            arguments.append('-alg')
            arguments.append('ZevenbergenThorne')

        options = self.parameterAsString(parameters, self.OPTIONS, context)
        if options:
            arguments.extend(GdalUtils.parseCreationOptions(options))

        return [self.commandName(), GdalUtils.escapeAndJoin(arguments)]

    def processAlgorithm(self, parameters, context, feedback):
        inputFile = self.parameterAsRasterLayer(parameters, self.INPUT, context).source()
        zFactor = self.parameterAsDouble(parameters, self.Z_FACTOR, context)
        automaticColors = self.parameterAsBoolean(parameters, self.AUTO_COLORS, context)
        outputFile = self.parameterAsOutputLayer(parameters, self.OUTPUT, context)
        frequencyDistribution = self.parameterAsFileOutput(parameters, self.FREQUENCY_DISTRIBUTION, context)

        outputFormat = QgsRasterFileWriter.driverForExtension(os.path.splitext(outputFile)[1])

        relief = QgsRelief(inputFile, outputFile, outputFormat)

        if automaticColors:
            reliefColors = relief.calculateOptimizedReliefClasses()
        else:
            colors = ParameterReliefColors.valueToColors(parameters[self.COLORS])
            if colors is None or len(colors) == 0:
                raise QgsProcessingException(
                    self.tr('Specify relief colors or activate "Generate relief classes automatically" option.'))

            reliefColors = []
            for c in colors:
                v = c.split(',')
                color = QgsRelief.ReliefColor(QColor(int(v[2]), int(v[3]), int(v[4])),
                                              float(v[0]),
                                              float(v[1]))
                reliefColors.append(color)

        relief.setReliefColors(reliefColors)
        relief.setZFactor(zFactor)
        if frequencyDistribution:
            relief.exportFrequencyDistributionToCsv(frequencyDistribution)
        relief.processRaster(feedback)

        return {self.OUTPUT: outputFile, self.FREQUENCY_DISTRIBUTION: frequencyDistribution}

  def test02_SaveAsGeoTIFF(self):
    """Save raster layer as a GeoTIFF file"""
    self._testAvailable() or self.skipTest("Not available")

    layer = self._testLayer(self.fileName)

    # write to a disk
    # ref. to the InaSAFE plugin
    provider = layer.dataProvider()
    pipe = QgsRasterPipe()
    assert pipe.set(provider.clone()), "cannot set provider to pipe"

    outfile = self._testDataPath(self.fileName, output=True)
    writer = QgsRasterFileWriter(outfile)
    assert not writer.writeRaster(pipe, provider.xSize(), provider.ySize(), provider.extent(), provider.crs()), "failed to write"
    assert os.path.exists(outfile), "output file cannot be found"

    def getConsoleCommands(self, parameters, context, feedback, executing=True):
        arguments = []
        inLayer = self.parameterAsRasterLayer(parameters, self.INPUT, context)
        arguments.append(inLayer.source())

        out = self.parameterAsOutputLayer(parameters, self.OUTPUT, context)
        arguments.append(out)

        arguments.append('-of')
        arguments.append(QgsRasterFileWriter.driverForExtension(os.path.splitext(out)[1]))

        arguments.append('-b')
        arguments.append(str(self.parameterAsInt(parameters, self.BAND, context)))

        if self.parameterAsBool(parameters, self.RGBA, context):
            arguments.append('-rgba')

        commands = []
        if isWindows():
            commands = ['cmd.exe', '/C ', 'pct2rgb.bat',
                        GdalUtils.escapeAndJoin(arguments)]
        else:
            commands = ['pct2rgb.py', GdalUtils.escapeAndJoin(arguments)]

        return commands

    def getConsoleCommands(self, parameters, context, feedback, executing=True):
        inLayer = self.parameterAsRasterLayer(parameters, self.INPUT, context)
        if inLayer is None:
            raise QgsProcessingException(self.invalidRasterError(parameters, self.INPUT))

        out = self.parameterAsOutputLayer(parameters, self.OUTPUT, context)

        arguments = []

        bands = self.parameterAsInts(parameters, self.BANDS, context)
        for band in bands:
            arguments.append('-b {}'.format(band))

        data_type = self.parameterAsEnum(parameters, self.DATA_TYPE, context)
        if data_type:
            arguments.append('-ot ' + self.TYPES[data_type])

        arguments.append('-of')
        arguments.append(QgsRasterFileWriter.driverForExtension(os.path.splitext(out)[1]))

        options = self.parameterAsString(parameters, self.OPTIONS, context)
        if options:
            arguments.extend(GdalUtils.parseCreationOptions(options))

        arguments.append(inLayer.source())
        arguments.append(out)

        return [self.commandName(), GdalUtils.escapeAndJoin(arguments)]

    def getConsoleCommands(self, parameters, context, feedback, executing=True):
        arguments = []
        inLayer = self.parameterAsRasterLayer(parameters, self.INPUT, context)
        if inLayer is None:
            raise QgsProcessingException(self.invalidRasterError(parameters, self.INPUT))

        arguments.append(inLayer.source())

        out = self.parameterAsOutputLayer(parameters, self.OUTPUT, context)
        self.setOutputValue(self.OUTPUT, out)
        arguments.append(out)

        arguments.append('-of')
        arguments.append(QgsRasterFileWriter.driverForExtension(os.path.splitext(out)[1]))

        arguments.append('-b')
        arguments.append(str(self.parameterAsInt(parameters, self.BAND, context)))

        if self.parameterAsBoolean(parameters, self.RGBA, context):
            arguments.append('-rgba')

        if isWindows():
            commands = ["python3", "-m", self.commandName()]
        else:
            commands = [self.commandName() + '.py']

        commands.append(GdalUtils.escapeAndJoin(arguments))

        return commands

    def getConsoleCommands(self, parameters, context, feedback, executing=True):
        arguments = ['roughness']
        inLayer = self.parameterAsRasterLayer(parameters, self.INPUT, context)
        if inLayer is None:
            raise QgsProcessingException(self.invalidRasterError(parameters, self.INPUT))

        arguments.append(inLayer.source())

        out = self.parameterAsOutputLayer(parameters, self.OUTPUT, context)
        arguments.append(out)

        arguments.append('-of')
        arguments.append(QgsRasterFileWriter.driverForExtension(os.path.splitext(out)[1]))

        arguments.append('-b')
        arguments.append(str(self.parameterAsInt(parameters, self.BAND, context)))

        if self.parameterAsBool(parameters, self.COMPUTE_EDGES, context):
            arguments.append('-compute_edges')

        options = self.parameterAsString(parameters, self.OPTIONS, context)
        if options:
            arguments.append('-co')
            arguments.append(options)

        return [self.commandName(), GdalUtils.escapeAndJoin(arguments)]

    def getConsoleCommands(self, parameters, context, feedback, executing=True):
        arguments = []
        arguments.append('-st')
        arguments.append(str(self.parameterAsInt(parameters, self.THRESHOLD, context)))

        if self.parameterAsBool(parameters, self.EIGHT_CONNECTEDNESS, context):
            arguments.append('-8')
        else:
            arguments.append('-4')

        if self.parameterAsBool(parameters, self.NO_MASK, context):
            arguments.append('-nomask')

        mask = self.parameterAsRasterLayer(parameters, self.INPUT, context)
        if mask:
            arguments.append('-mask {}'.format(mask.source()))

        out = self.parameterAsOutputLayer(parameters, self.OUTPUT, context)
        arguments.append('-of')
        arguments.append(QgsRasterFileWriter.driverForExtension(os.path.splitext(out)[1]))

        arguments.append(self.parameterAsRasterLayer(parameters, self.INPUT, context).source())
        arguments.append(out)

        commands = []
        if isWindows():
            commands = ['cmd.exe', '/C ', 'gdal_sieve.bat',
                        GdalUtils.escapeAndJoin(arguments)]
        else:
            commands = ['gdal_sieve.py', GdalUtils.escapeAndJoin(arguments)]

        return commands

    def getConsoleCommands(self, parameters, context, feedback, executing=True):
        inLayer = self.parameterAsRasterLayer(parameters, self.INPUT, context)
        out = self.parameterAsOutputLayer(parameters, self.OUTPUT, context)
        sourceCrs = self.parameterAsCrs(parameters, self.SOURCE_CRS, context)
        targetCrs = self.parameterAsCrs(parameters, self.TARGET_CRS, context)
        nodata = self.parameterAsDouble(parameters, self.NODATA, context)
        resolution = self.parameterAsDouble(parameters, self.TARGET_RESOLUTION, context)

        arguments = []
        if sourceCrs.isValid():
            arguments.append('-s_srs')
            arguments.append(sourceCrs.authid())

        if targetCrs.isValid():
            arguments.append('-t_srs')
            arguments.append(targetCrs.authid())

        if nodata:
            arguments.append('-dstnodata')
            arguments.append(str(nodata))

        if resolution:
            arguments.append('-tr')
            arguments.append(str(resolution))
            arguments.append(str(resolution))

        arguments.append('-r')
        arguments.append(self.methods[self.parameterAsEnum(parameters, self.RESAMPLING, context)][1])

        extent = self.parameterAsExtent(parameters, self.TARGET_EXTENT, context)
        if not extent.isNull():
            arguments.append('-te')
            arguments.append(extent.xMinimum())
            arguments.append(extent.yMinimum())
            arguments.append(extent.xMaximum())
            arguments.append(extent.yMaximum())

            extentCrs = self.parameterAsCrs(parameters, self.TARGET_EXTENT_CRS, context)
            if extentCrs:
                arguments.append('-te_srs')
                arguments.append(extentCrs.authid())

        if self.parameterAsBool(parameters, self.MULTITHREADING, context):
            arguments.append('-multi')

        arguments.append('-ot')
        arguments.append(self.TYPES[self.parameterAsEnum(parameters, self.DATA_TYPE, context)])

        out = self.parameterAsOutputLayer(parameters, self.OUTPUT, context)
        arguments.append('-of')
        arguments.append(QgsRasterFileWriter.driverForExtension(os.path.splitext(out)[1]))

        options = self.parameterAsString(parameters, self.OPTIONS, context)
        if options:
            arguments.extend(GdalUtils.parseCreationOptions(options))

        arguments.append(inLayer.source())
        arguments.append(out)

        return ['gdalwarp', GdalUtils.escapeAndJoin(arguments)]