本文整理汇总了Python中pyNastran.f06.f06_formatting.write_floats_13e函数的典型用法代码示例。如果您正苦于以下问题：Python write_floats_13e函数的具体用法？Python write_floats_13e怎么用？Python write_floats_13e使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了write_floats_13e函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Python代码示例。
示例1: _write_f06_springs_transient
def _write_f06_springs_transient(f, stress, header, words, name):
raise RuntimeError('is this used?')
for dt, datai in sorted(iteritems(data)):
header[1] = ' %s = %10.4E\n' % (name, dt)
msg += header + words
f.write(''.join(msg))
eids = []
stresses = []
for eid, stress in sorted(iteritems(datai)):
eids.append(eid)
stresses.append(stress)
if len(stresses) == 4:
stresses = write_floats_13e(stresses)
f.write(' %10i %13s %10i %13s %10i %13s %10i %13s\n' % (
eids[0], stresses[0],
eids[1], stresses[1],
eids[2], stresses[2],
eids[3], stresses[3]))
eids = []
stresses = []
if stresses:
line = ' '
stresses = write_floats_13e(stresses)
for eid, stress in zip(eids, stresses):
line += '%10i %13s ' % (eid, stress)
f.write(line.rstrip() + '\n')
msg.append(page_stamp % page_num)
f.write(''.join(msg))
msg = ['']
page_num += 1
return page_num - 1
开发者ID:EmanueleCannizzaro，项目名称:pyNastran，代码行数:35，代码来源:oes_springs.py
示例2: _write_sort2_as_sort2
def _write_sort2_as_sort2(self, f, page_num, page_stamp, header, words):
nodes = self.node_gridtype[:, 0]
gridtypes = self.node_gridtype[:, 1]
times = self._times
for inode, (node_id, gridtypei) in enumerate(zip(nodes, gridtypes)):
t1 = self.data[inode, :, 0]
t2 = self.data[inode, :, 1]
t3 = self.data[inode, :, 2]
r1 = self.data[inode, :, 3]
r2 = self.data[inode, :, 4]
r3 = self.data[inode, :, 5]
header[1] = ' POINT-ID = %10i\n' % node_id
f.write(''.join(header + words))
for dt, t1i, t2i, t3i, r1i, r2i, r3i in zip(times, t1, t2, t3, r1, r2, r3):
sgridtype = self.recast_gridtype_as_string(gridtypei)
vals = [t1i, t2i, t3i, r1i, r2i, r3i]
vals2 = write_floats_13e(vals)
(dx, dy, dz, rx, ry, rz) = vals2
if sgridtype == 'G':
f.write('%14s %6s %-13s %-13s %-13s %-13s %-13s %s\n' % (
write_float_12e(dt), sgridtype, dx, dy, dz, rx, ry, rz))
elif sgridtype == 'S':
f.write('%14s %6s %s\n' % (node_id, sgridtype, dx))
elif sgridtype == 'H':
f.write('%14s %6s %-13s %-13s %-13s %-13s %-13s %s\n' % (
write_float_12e(dt), sgridtype, dx, dy, dz, rx, ry, rz))
elif sgridtype == 'L':
f.write('%14s %6s %-13s %-13s %-13s %-13s %-13s %s\n' % (
write_float_12e(dt), sgridtype, dx, dy, dz, rx, ry, rz))
else:
raise NotImplementedError(sgridtype)
f.write(page_stamp % page_num)
page_num += 1
return page_num
开发者ID:hurlei，项目名称:pyNastran，代码行数:35，代码来源:table_object.py
示例3: write_f06
def write_f06(self, f, header=None, page_stamp='PAGE %s', page_num=1, is_mag_phase=False, is_sort1=True):
if header is None:
header = []
words = [' APPLIED LOADS VECTOR\n',
'\n',
' EID SOURCE FX FY FZ MX MY MZ\n']
ntimes, ntotal, size = self.data.shape
for itime, dt in enumerate(self._times):
if self.nonlinear_factor is not None:
if isinstance(dt, float):
header[1] = ' %s = %10.4E\n' % (self.data_code['name'], dt)
else:
header[1] = ' %s = %10i\n' % (self.data_code['name'], dt)
f.write(''.join(header + words))
f1 = self.data[itime, :, 0]
f2 = self.data[itime, :, 1]
f3 = self.data[itime, :, 2]
m1 = self.data[itime, :, 3]
m2 = self.data[itime, :, 4]
m3 = self.data[itime, :, 5]
for f1i, f2i, f3i, m1i, m2i, m3i in zip(f1, f2, f3, m1, m2, m3):
vals = [f1i, f2i, f3i, m1i, m2i, m3i]
vals2 = write_floats_13e(vals)
(dx, dy, dz, rx, ry, rz) = vals2
f.write('%14i %6s %-13s %-13s %-13s %-13s %-13s %s\n' % (
node_id, eid, source, dx, dy, dz, rx, ry, rz))
f.write(page_stamp % page_num)
page_num += 1
return page_num-1
开发者ID:EmanueleCannizzaro，项目名称:pyNastran，代码行数:30，代码来源:opg_objects.py
示例4: write_f06
def write_f06(self, f, header=None, page_stamp='PAGE %s', page_num=1, is_mag_phase=False, is_sort1=True):
if header is None:
header = []
msg = self._get_msgs()
(ntimes, ntotal) = self.data.shape[:2]
eids = self.element
for itime in range(ntimes):
dt = self._times[itime]
header = _eigenvalue_header(self, header, itime, ntimes, dt)
f.write(''.join(header + msg))
compX, shearY, shearZ, axialU, shearV, shearW, slipV, slipW
compX = self.data[itime, :, 0]
shearY = self.data[itime, :, 1]
shearZ = self.data[itime, :, 2]
axialU = self.data[itime, :, 3]
shearV = self.data[itime, :, 4]
shearW = self.data[itime, :, 5]
slipV = self.data[itime, :, 6]
slipW = self.data[itime, :, 7]
for (i, eid, compXi, shearYi, shearZi, axialUi, shearVi, shearWi, slipVi, slipWi) in zip(
count(), eids, compX, shearY, shearZ, axialU, shearV, shearW, slipV, slipW):
vals = [compXi, shearYi, shearZi, axialUi, shearVi, shearWi, slipVi, slipWi]
vals2 = write_floats_13e(vals)
[compXi, shearYi, shearZi, axialUi, shearVi, shearWi, slipVi, slipWi] = vals2
f.write('0%8i %-13s %-13s %-13s %-13s %-13s %-13s %-13s %s\n'
% (eid, compXi, shearYi, shearZi, axialUi, shearVi, shearWi, slipVi, slipWi))
f.write(page_stamp % page_num)
page_num += 1
if self.nonlinear_factor is None:
page_num -= 1
return page_num
开发者ID:hurlei，项目名称:pyNastran，代码行数:34，代码来源:oes_gap.py
示例5: _write_sort2_as_sort2
def _write_sort2_as_sort2(self, f, page_num, page_stamp, header, words):
nodes = self.node_gridtype[:, 0]
gridtypes = self.node_gridtype[:, 1]
times = self._times
for inode, (node_id, gridtypei) in enumerate(zip(nodes, gridtypes)):
t1 = self.data[inode, :, 0]
header[1] = ' POINT-ID = %10i\n' % node_id
f.write(''.join(header + words))
for dt, t1i in zip(times, t1):
sgridtype = self.recast_gridtype_as_string(gridtypei)
vals = [t1i]
vals2 = write_floats_13e(vals)
dx = vals2[0]
if sgridtype == 'G':
f.write('%14s %6s %s\n' % (write_float_12e(dt), sgridtype, dx))
elif sgridtype == 'S':
f.write('%14s %6s %s\n' % (node_id, sgridtype, dx))
elif sgridtype == 'H':
f.write('%14s %6s %s\n' % (write_float_12e(dt), sgridtype, dx))
elif sgridtype == 'L':
f.write('%14s %6s %s\n' % (write_float_12e(dt), sgridtype, dx))
else:
raise NotImplementedError(sgridtype)
f.write(page_stamp % page_num)
page_num += 1
return page_num
开发者ID:hurlei，项目名称:pyNastran，代码行数:27，代码来源:scalar_table_object.py
示例6: write_f06
def write_f06(self, f, header=None, page_stamp='PAGE %s', page_num=1, is_mag_phase=False, is_sort1=True):
if header is None:
header = []
msg = self._get_msgs()
(ntimes, ntotal) = self.data.shape[:2]
eids = self.element
for itime in range(ntimes):
dt = self._times[itime]
header = _eigenvalue_header(self, header, itime, ntimes, dt)
f.write(''.join(header + msg))
#[tx, ty, tz, rx, ry, rz]
tx = self.data[itime, :, 0]
ty = self.data[itime, :, 1]
tz = self.data[itime, :, 2]
rx = self.data[itime, :, 3]
ry = self.data[itime, :, 4]
rz = self.data[itime, :, 5]
for eid, txi, tyi, tzi, rxi, ryi, rzi in zip(
eids, tx, ty, tz, rx, ry, rz):
vals = [txi, tyi, tzi, rxi, ryi, rzi]
vals2 = write_floats_13e(vals)
[txi, tyi, tzi, rxi, ryi, rzi] = vals2
f.write('0 %8i %-13s %-13s %-13s %-13s %-13s %s\n' % (
eid, txi, tyi, tzi, rxi, ryi, rzi))
f.write(page_stamp % page_num)
page_num += 1
if self.nonlinear_factor is None:
page_num -= 1
return page_num
开发者ID:EmanueleCannizzaro，项目名称:pyNastran，代码行数:32，代码来源:oes_bush.py
示例7: _write_sort1_as_sort2
def _write_sort1_as_sort2(self, f, page_num, page_stamp, header, words):
element = self.element
element_type = self.element_data_type
times = self._times
node_id = 0 ## TODO: fix the node id
for inode, (eid, etypei) in enumerate(zip(element, element_type)):
t1 = self.data[:, inode, 0].ravel()
t2 = self.data[:, inode, 1].ravel()
t3 = self.data[:, inode, 2].ravel()
r1 = self.data[:, inode, 3].ravel()
r2 = self.data[:, inode, 4].ravel()
r3 = self.data[:, inode, 5].ravel()
header[1] = ' POINT-ID = %10i\n' % node_id
f.write(''.join(header + words))
for dt, t1i, t2i, t3i, r1i, r2i, r3i in zip(times, t1, t2, t3, r1, r2, r3):
vals = [t1i, t2i, t3i, r1i, r2i, r3i]
vals2 = write_floats_13e(vals)
(dx, dy, dz, rx, ry, rz) = vals2
f.write('%14s %6s %-13s %-13s %-13s %-13s %-13s %s\n' % (
write_float_12E(dt), etypei, dx, dy, dz, rx, ry, rz))
f.write(page_stamp % page_num)
page_num += 1
return page_num
开发者ID:EmanueleCannizzaro，项目名称:pyNastran，代码行数:25，代码来源:op2_result_element_table_object.py
示例8: _write_sort1_as_sort1
def _write_sort1_as_sort1(self, f, page_num, page_stamp, header, words):
element = self.element
element_type = self.element_data_type
times = self._times
for itime in range(self.ntimes):
dt = self._times[itime]
t1 = self.data[itime, :, 0]
t2 = self.data[itime, :, 1]
t3 = self.data[itime, :, 2]
r1 = self.data[itime, :, 3]
r2 = self.data[itime, :, 4]
r3 = self.data[itime, :, 5]
if isinstance(dt, (float, float32)):
header[1] = ' %s = %10.4E\n' % (self.data_code['name'], dt)
else:
header[1] = ' %s = %10i\n' % (self.data_code['name'], dt)
f.write(''.join(header + words))
for element_id, etypei, t1i, t2i, t3i, r1i, r2i, r3i in zip(element, element_type, t1, t2, t3, r1, r2, r3):
vals = [t1i, t2i, t3i, r1i, r2i, r3i]
vals2 = write_floats_13e(vals)
(dx, dy, dz, rx, ry, rz) = vals2
f.write('%14i %6s %-13s %-13s %-13s %-13s %-13s %s\n' % (element_id, etypei, dx, dy, dz, rx, ry, rz))
f.write(page_stamp % page_num)
page_num += 1
return page_num
开发者ID:marcinch18，项目名称:pyNastran，代码行数:27，代码来源:element_table_object.py
示例9: write_f06
def write_f06(self, f, header=None, page_stamp='PAGE %s', page_num=1, is_mag_phase=False, is_sort1=True):
if header is None:
header = []
msg = self._get_msgs()
(ntimes, ntotal) = self.data.shape[:2]
eids = self.element
for itime in range(ntimes):
dt = self._times[itime]
header = _eigenvalue_header(self, header, itime, ntimes, dt)
f.write(''.join(header + msg))
#[element_force, axial_displacement, axial_velocity, axial_stress, axial_strain, plastic_strain, is_failed]
element_force = self.data[itime, :, 0]
axial_displacement = self.data[itime, :, 1]
axial_velocity = self.data[itime, :, 2]
axial_stress = self.data[itime, :, 3]
axial_strain = self.data[itime, :, 4]
plastic_strain = self.data[itime, :, 5]
is_failed = self.is_failed[itime, :, 0]
for (i, eid, element_forcei, axial_displacementi, axial_velocityi, axial_stressi, axial_straini, plastic_straini, is_failedi) in zip(
count(), eids, element_force, axial_displacement, axial_velocity, axial_stress, axial_strain, plastic_strain, is_failed):
vals = [element_forcei, axial_displacementi, axial_velocityi, axial_stressi, axial_straini, plastic_straini, is_failedi]
vals2 = write_floats_13e(vals)
[element_forcei, axial_displacementi, axial_velocityi, axial_stressi, axial_straini, plastic_straini, is_failedi] = vals2
f.write('0%8i %-13s %-13s %-13s %-13s %-13s %-13s %s\n'
% (eid, element_forcei, axial_displacementi, axial_velocityi, axial_stressi, axial_straini, plastic_straini, is_failedi))
f.write(page_stamp % page_num)
page_num += 1
if self.nonlinear_factor is None:
page_num -= 1
return page_num
开发者ID:EmanueleCannizzaro，项目名称:pyNastran，代码行数:33，代码来源:oes_bush1d.py
示例10: _write_f06_transient
def _write_f06_transient(self, header, page_stamp, page_num=1, f=None, is_mag_phase=False, is_sort1=True):
f.write('GridPointStressesVolume _write_f06_transient is not implemented...\n')
return page_num
#raise NotImplementedError()
msg = header + [' S T R E S S E S A T G R I D P O I N T S - - S U R F A C E 5\n',
'0 SURFACE X-AXIS X NORMAL(Z-AXIS) Z REFERENCE COORDINATE SYSTEM FOR SURFACE DEFINITION CID 0\n',
' GRID ELEMENT STRESSES IN SURFACE SYSTEM PRINCIPAL STRESSES MAX \n',
' ID ID FIBRE NORMAL-X NORMAL-Y SHEAR-XY ANGLE MAJOR MINOR SHEAR VON MISES\n']
#'0 13683 3736 TRIAX6 4.996584E+00 0.0 1.203093E+02 0.0 0.0 0.0'
#' 13683 3737 TRIAX6 -4.996584E+00 0.0 -1.203093E+02 0.0 0.0 0.0'
#' 13683 *TOTALS* 6.366463E-12 0.0 -1.364242E-12 0.0 0.0 0.0'
for dt, Forces in sorted(iteritems(self.forces)):
for ekey, force in sorted(iteritems(Forces)):
zero = '0'
for iLoad, f in enumerate(force):
(f1, f2, f3) = f
(m1, m2, m3) = self.moments[dt][ekey][iLoad]
(elemName) = self.elemName[ekey][iLoad]
eid = self.eids[ekey][iLoad]
vals = [f1, f2, f3, m1, m2, m3]
vals2 = write_floats_13e(vals)
[f1, f2, f3, m1, m2, m3] = vals2
if eid == 0:
eid = ''
msg.append('%s %8s %10s %8s %s %s %s %s %s %-s\n' % (zero, ekey, eid, elemName, f1, f2, f3, m1, m2, m3))
zero = ' '
msg.append(page_stamp % page_num)
f.write(''.join(msg))
msg = ['']
page_num += 1
return page_num - 1
开发者ID:EmanueleCannizzaro，项目名称:pyNastran，代码行数:34，代码来源:ogs_surfaceStresses.py
示例11: _write_sort1_as_sort1
def _write_sort1_as_sort1(self, f06_file, header, page_stamp, msg, page_num):
(ntimes, ntotal) = self.data.shape[:2]
eids = self.element
for itime in range(ntimes):
dt = self._times[itime]
header = _eigenvalue_header(self, header, itime, ntimes, dt)
f06_file.write(''.join(header + msg))
sd = self.data[itime, :, 0]
sxc = self.data[itime, :, 1]
sxd = self.data[itime, :, 2]
sxe = self.data[itime, :, 3]
sxf = self.data[itime, :, 4]
axial = self.data[itime, :, 5]
smax = self.data[itime, :, 6]
smin = self.data[itime, :, 7]
MS = self.data[itime, :, 8]
for (i, eid, sdi, sxci, sxdi, sxei, sxfi, axiali, smaxi, smini, MSi) in zip(
count(), eids, sd, sxc, sxd, sxe, sxf, axial, smax, smin, MS):
vals = [sdi, sxci, sxdi, sxei, sxfi, axiali, smaxi, smini, MSi]
vals2 = write_floats_13e(vals)
[sdi, sxci, sxdi, sxei, sxfi, axiali, smaxi, smini, MSi] = vals2
f06_file.write('0%8i %-13s %-13s %-13s %-13s %-13s %-13s %-13s %s %s\n'
% (eid, sdi, sxci, sxdi, sxei, sxfi, axiali, smaxi, smini, MSi))
f06_file.write(page_stamp % page_num)
page_num += 1
if self.nonlinear_factor is None:
page_num -= 1
return page_num
开发者ID:hurlei，项目名称:pyNastran，代码行数:33，代码来源:oes_bars100.py
示例12: _write_sort1_as_sort1
def _write_sort1_as_sort1(self, header, page_stamp, page_num, f, msg_temp):
ntimes = self.data.shape[0]
eids = self.element
is_odd = False
nwrite = len(eids)
if len(eids) % 2 == 1:
nwrite -= 1
is_odd = True
for itime in range(ntimes):
dt = self._times[itime]
header = _eigenvalue_header(self, header, itime, ntimes, dt)
f.write(''.join(header + msg_temp))
#print("self.data.shape=%s itime=%s ieids=%s" % (str(self.data.shape), itime, str(ieids)))
axial = self.data[itime, :, 0]
SMa = self.data[itime, :, 1]
torsion = self.data[itime, :, 2]
SMt = self.data[itime, :, 3]
out = []
for eid, axiali, SMai, torsioni, SMti in zip(eids, axial, SMa, torsion, SMt):
[axiali, torsioni, SMai, SMti] = write_floats_13e([axiali, torsioni, SMai, SMti])
out.append([eid, axiali, SMai, torsioni, SMti])
for i in range(0, nwrite, 2):
out_line = ' %8i %-13s %-13s %-13s %-13s %-8i %-13s %-13s %-13s %-s\n' % (tuple(out[i] + out[i + 1]))
f.write(out_line)
if is_odd:
out_line = ' %8i %-13s %-13s %-13s %13s\n' % (tuple(out[-1]))
f.write(out_line)
f.write(page_stamp % page_num)
page_num += 1
return page_num - 1
开发者ID:hurlei，项目名称:pyNastran，代码行数:35，代码来源:oes_rods.py
示例13: _write_sort1_as_sort1
def _write_sort1_as_sort1(self, header, page_stamp, page_num, f, msg_temp):
ntimes = self.data.shape[0]
eids = self.element
is_odd = False
nwrite = len(eids)
for itime in range(ntimes):
dt = self._times[itime]
header = _eigenvalue_header(self, header, itime, ntimes, dt)
f.write(''.join(header + msg_temp))
#print("self.data.shape=%s itime=%s ieids=%s" % (str(self.data.shape), itime, str(ieids)))
axial = self.data[itime, :, 0]
eqs = self.data[itime, :, 1]
total = self.data[itime, :, 2]
epcs = self.data[itime, :, 3]
ecs = self.data[itime, :, 4]
lts = self.data[itime, :, 5]
#print "dt=%s axials=%s eqs=%s ts=%s epcs=%s ecs=%s lts=%s" %(dt,axial,eqs,ts,epcs,ecs,lts)
#msgE[eid] = ' ELEMENT-ID = %8i\n' % (eid)
#if eid not in msgT:
#msgT[eid] = []
#msgT[eid].append(' %9.3E %13.6E %13.6E %13.6E %13.6E %13.6E %13.6E\n' % (dt, axial, eqs, ts, epcs, ecs, lts))
for eid, axiali, eqsi, totali, epcsi, ecsi, ltsi in zip(eids, axial, eqs, total, epcs, ecs, lts):
([saxial, seqs, stotal, sepcs, secs, slts]) = write_floats_13e(
[axiali, eqsi, totali, epcsi, ecsi, ltsi])
f.write(' %8i %-13s %-13s %-13s %-13s %-13s %s\n' % (
eid, saxial, seqs, stotal, sepcs, secs, slts))
f.write(page_stamp % page_num)
page_num += 1
return page_num - 1
开发者ID:EmanueleCannizzaro，项目名称:pyNastran，代码行数:35，代码来源:oes_nonlinear.py
示例14: write_f06
def write_f06(self, f, header=None, page_stamp='PAGE %s', page_num=1, is_mag_phase=False, is_sort1=True):
if header is None:
header = []
msg = self._get_msgs()
(ntimes, ntotal) = self.data.shape[:2]
eids = self.element_node[:, 0]
nids = self.element_node[:, 1]
for itime in range(ntimes):
dt = self._times[itime]
header = _eigenvalue_header(self, header, itime, ntimes, dt)
f.write(''.join(header + msg))
#[radial, azimuthal, axial, shear, omax, oms, ovm]
radial = self.data[itime, :, 0]
azimuthal = self.data[itime, :, 1]
axial = self.data[itime, :, 2]
shear = self.data[itime, :, 3]
omax = self.data[itime, :, 4]
oms = self.data[itime, :, 5]
ovm = self.data[itime, :, 6]
for (i, eid, nid, radiali, azimuthali, axiali, sheari, omaxi, omsi, ovmi) in zip(
count(), eids, nids, radial, azimuthal, axial, shear, omax, oms, ovm):
vals = [radiali, azimuthali, axiali, sheari, omaxi, omsi, ovmi]
vals2 = write_floats_13e(vals)
[radiali, azimuthali, axiali, sheari, omaxi, omsi, ovmi] = vals2
f.write('0%8i %-13s %-13s %-13s %-13s %-13s %-13s %-13s %s\n'
% (eid, nid, radiali, azimuthali, axiali, sheari, omaxi, omsi, ovmi))
f.write(page_stamp % page_num)
page_num += 1
if self.nonlinear_factor is None:
page_num -= 1
return page_num
开发者ID:hurlei，项目名称:pyNastran，代码行数:35，代码来源:oes_triax.py
示例15: _write_sort1_as_sort1
def _write_sort1_as_sort1(self, f, page_num, page_stamp, header, words):
nodes = self.node_gridtype[:, 0]
gridtypes = self.node_gridtype[:, 1]
#times = self._times
for itime in range(self.ntimes):
dt = self._times[itime]
t1 = self.data[itime, :, 0]
if isinstance(dt, (float, float32)):
header[1] = ' %s = %10.4E\n' % (self.data_code['name'], dt)
else:
header[1] = ' %s = %10i\n' % (self.data_code['name'], dt)
f.write(''.join(header + words))
for node_id, gridtypei, t1i in zip(nodes, gridtypes, t1):
sgridtype = self.recast_gridtype_as_string(gridtypei)
vals = [t1i]
vals2 = write_floats_13e(vals)
dx = vals2[0]
if sgridtype == 'G':
f.write('%14i %6s %s\n' % (node_id, sgridtype, dx))
elif sgridtype == 'S':
f.write('%14i %6s %s\n' % (node_id, sgridtype, dx))
elif sgridtype == 'H':
f.write('%14i %6s %s\n' % (node_id, sgridtype, dx))
elif sgridtype == 'L':
f.write('%14i %6s %s\n' % (node_id, sgridtype, dx))
else:
raise NotImplementedError(sgridtype)
f.write(page_stamp % page_num)
page_num += 1
return page_num
开发者ID:hurlei，项目名称:pyNastran，代码行数:31，代码来源:scalar_table_object.py
示例16: write_f06
def write_f06(self, f, header=None, page_stamp='PAGE %s', page_num=1, is_mag_phase=False, is_sort1=True):
if header is None:
header = []
msg, nnodes, cen = _get_plate_msg(self)
# write the f06
ntimes = self.data.shape[0]
eids = self.element_node[:, 0]
nids = self.element_node[:, 1]
#cen_word = 'CEN/%i' % nnodes
cen_word = cen
for itime in range(ntimes):
dt = self._times[itime]
header = _eigenvalue_header(self, header, itime, ntimes, dt)
f.write(''.join(header + msg))
#print("self.data.shape=%s itime=%s ieids=%s" % (str(self.data.shape), itime, str(ieids)))
#[fiber_dist, oxx, oyy, txy, angle, majorP, minorP, ovm]
fiber_dist = self.data[itime, :, 0]
oxx = self.data[itime, :, 1]
oyy = self.data[itime, :, 2]
txy = self.data[itime, :, 3]
angle = self.data[itime, :, 4]
majorP = self.data[itime, :, 5]
minorP = self.data[itime, :, 6]
ovm = self.data[itime, :, 7]
for (i, eid, nid, fdi, oxxi, oyyi, txyi, anglei, major, minor, ovmi) in zip(
count(), eids, nids, fiber_dist, oxx, oyy, txy, angle, majorP, minorP, ovm):
[fdi, oxxi, oyyi, txyi, major, minor, ovmi] = write_floats_13e(
[fdi, oxxi, oyyi, txyi, major, minor, ovmi])
ilayer = i % 2
# tria3
if self.element_type in [33, 74]: # CQUAD4, CTRIA3
if ilayer == 0:
f.write('0 %6i %-13s %-13s %-13s %-13s %8.4f %-13s %-13s %s\n' % (eid, fdi, oxxi, oyyi, txyi, anglei, major, minor, ovmi))
else:
f.write(' %6s %-13s %-13s %-13s %-13s %8.4f %-13s %-13s %s\n' % ('', fdi, oxxi, oyyi, txyi, anglei, major, minor, ovmi))
elif self.element_type in [64, 70, 75, 82, 144]: # CQUAD8, CTRIAR, CTRIA6, CQUADR, CQUAD4
# bilinear
if nid == 0 and ilayer == 0: # CEN
f.write('0 %8i %8s %-13s %-13s %-13s %-13s %8.4f %-13s %-13s %s\n' % (eid, cen_word, fdi, oxxi, oyyi, txyi, anglei, major, minor, ovmi))
elif ilayer == 0:
f.write(' %8s %8i %-13s %-13s %-13s %-13s %8.4f %-13s %-13s %s\n' % ('', nid, fdi, oxxi, oyyi, txyi, anglei, major, minor, ovmi))
elif ilayer == 1:
f.write(' %8s %8s %-13s %-13s %-13s %-13s %8.4f %-13s %-13s %s\n\n' % ('', '', fdi, oxxi, oyyi, txyi, anglei, major, minor, ovmi))
else:
raise NotImplementedError('element_name=%s self.element_type=%s' % (self.element_name, self.element_type))
f.write(page_stamp % page_num)
page_num += 1
return page_num - 1
开发者ID:EmanueleCannizzaro，项目名称:pyNastran，代码行数:56，代码来源:oes_plates.py
示例17: write_f06
def write_f06(self, f, header=None, page_stamp='PAGE %s', page_num=1, is_mag_phase=False, is_sort1=True):
if header is None:
header = []
msg = self._get_msgs()
(ntimes, ntotal) = self.data.shape[:2]
eids = self.element
#print('CBAR ntimes=%s ntotal=%s' % (ntimes, ntotal))
for itime in range(ntimes):
dt = self._times[itime]
header = _eigenvalue_header(self, header, itime, ntimes, dt)
f.write(''.join(header + msg))
s1a = self.data[itime, :, 0]
s2a = self.data[itime, :, 1]
s3a = self.data[itime, :, 2]
s4a = self.data[itime, :, 3]
axial = self.data[itime, :, 4]
smaxa = self.data[itime, :, 5]
smina = self.data[itime, :, 6]
MSt = self.data[itime, :, 7]
s1b = self.data[itime, :, 8]
s2b = self.data[itime, :, 9]
s3b = self.data[itime, :, 10]
s4b = self.data[itime, :, 11]
smaxb = self.data[itime, :, 12]
sminb = self.data[itime, :, 13]
MSc = self.data[itime, :, 14]
for (i, eid, s1ai, s2ai, s3ai, s4ai, axiali, smaxai, sminai, MSti,
s1bi, s2bi, s3bi, s4bi, smaxbi, sminbi, MSci) in zip(
count(), eids, s1a, s2a, s3a, s4a, axial, smaxa, smina, MSt,
s1b, s2b, s3b, s4b, smaxb, sminb, MSc):
vals = [s1ai, s2ai, s3ai, s4ai, axiali, smaxai, sminai, MSti,
s1bi, s2bi, s3bi, s4bi, smaxbi, sminbi, MSci]
vals2 = write_floats_13e(vals)
[s1ai, s2ai, s3ai, s4ai, axiali, smaxai, sminai, MSti,
s1bi, s2bi, s3bi, s4bi, smaxbi, sminbi, MSci] = vals2
f.write('0%8i %-13s %-13s %-13s %-13s %-13s %-13s %-13s %s\n'
' %8s %-13s %-13s %-13s %-13s %-13s %-13s %-13s %s\n'
% (eid, s1ai, s2ai, s3ai, s4ai, axiali, smaxai, sminai, MSti,
'', s1bi, s2bi, s3bi, s4bi, '', smaxbi, sminbi, MSci))
f.write(page_stamp % page_num)
page_num += 1
if self.nonlinear_factor is None:
page_num -= 1
return page_num
开发者ID:EmanueleCannizzaro，项目名称:pyNastran，代码行数:52，代码来源:oes_bars.py
示例18: write_f06
def write_f06(self, f, header=None, page_stamp='PAGE %s', page_num=1, is_mag_phase=False, is_sort1=True):
if header is None:
header = []
msg = self._get_msgs()
ntimes = self.data.shape[0]
eids = self.element_node[:, 0]
nids = self.element_node[:, 1]
locs = self.element_node[:, 2]
#xxbs = self.xxb
#print('CBEAM ntimes=%s ntotal=%s' % (ntimes, ntotal))
loc_map = ['C', 'D', 'E', 'F',
'C', 'D', 'E', 'F',]
for itime in range(ntimes):
dt = self._times[itime]
header = _eigenvalue_header(self, header, itime, ntimes, dt)
f.write(''.join(header + msg))
longs = self.data[itime, :, 0]
eqSs = self.data[itime, :, 1]
tEs = self.data[itime, :, 2]
epss = self.data[itime, :, 3]
ecss = self.data[itime, :, 4]
#msg = [' N O N L I N E A R S T R E S S E S I N B E A M E L E M E N T S ( C B E A M )\n',
#' \n',
#' ELEMENT GRID POINT STRESS EQUIVALENT TOTAL STRAIN EFF. STRAIN EFF. CREEP\n',
#' ID ID STRESS PLASTIC/NLELAST STRAIN\n',]
#'0 1 1 C 1.738817E+03 1.738817E+03 5.796055E-05 0.0 0.0\n',
#' D 1.229523E+03 1.229523E+03 4.098411E-05 0.0 0.0\n',
eid_old = None
for (i, eid, nid, loc, longi, eqS, tE, eps, ecs) in zip(
count(), eids, nids, locs, longs, eqSs, tEs, epss, ecss):
vals = [longi, eqS, tE, eps, ecs]
vals2 = write_floats_13e(vals)
[longi, eqS, tE, eps, ecs] = vals2
if loc == 0:
f.write('0 %14i %8i %4s %13s %13s %13s %13s %s\n' % (eid, nid, 'C', longi, eqS, tE, eps, ecs.rstrip()))
elif loc == 4:
f.write(' %14s %8i %4s %13s %13s %13s %13s %s\n' % ('', nid, 'C', longi, eqS, tE, eps, ecs.rstrip()))
else:
loci = loc_map[loc]
f.write(' %14s %8s %4s %13s %13s %13s %13s %s\n' % ('', '', loci, longi, eqS, tE, eps, ecs.rstrip()))
f.write(page_stamp % page_num)
page_num += 1
if self.nonlinear_factor is None:
page_num -= 1
return page_num
开发者ID:EmanueleCannizzaro，项目名称:pyNastran，代码行数:50，代码来源:oes_beams.py
示例19: _write_f06_springs
def _write_f06_springs(f, data):
raise RuntimeError('is this used?')
eids = []
stresses = []
for eid, stress in sorted(iteritems(data)):
eids.append(eid)
stresses.append(stress)
if len(stresses) == 4:
stresses = write_floats_13e(stresses)
f.write(' %10i %13s %10i %13s %10i %13s %10i %13s\n' % (
eids[0], stresses[0],
eids[1], stresses[1],
eids[2], stresses[2],
eids[3], stresses[3]))
eids = []
stresses = []
if stresses:
line = ' '
stresses = write_floats_13e(stresses)
for eid, stress in zip(eids, stresses):
line += '%10i %13s ' % (eid, stress)
f.write(line.rstrip() + '\n')
开发者ID:EmanueleCannizzaro，项目名称:pyNastran，代码行数:23，代码来源:oes_springs.py
示例20: _write_f06_block
def _write_f06_block(self, words, header, page_stamp, page_num, f, write_words,
is_mag_phase=False, is_sort1=True):
if write_words:
words += [' \n', ' POINT ID. TYPE T1 T2 T3 R1 R2 R3\n']
#words += self.getTableMarker()
f.write(''.join(header + words))
node = self.node_gridtype[:, 0]
gridtype = self.node_gridtype[:, 1]
t1 = self.data[0, :, 0]
for node_id, gridtypei, t1i in zip(node, gridtype, t1):
sgridtype = self.recast_gridtype_as_string(gridtypei)
vals = [t1i]
vals2 = write_floats_13e(vals)
dx = vals2[0]
f.write('%14i %6s %s\n' % (node_id, sgridtype, dx))
f.write(page_stamp % page_num)
return page_num
开发者ID:hurlei，项目名称:pyNastran，代码行数:18，代码来源:scalar_table_object.py
注：本文中的pyNastran.f06.f06_formatting.write_floats_13e函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论