本文整理汇总了Python中pyanaconda.ui.gui.spokes.lib.detailederror.DetailedErrorDialog类的典型用法代码示例。如果您正苦于以下问题：Python DetailedErrorDialog类的具体用法？Python DetailedErrorDialog怎么用？Python DetailedErrorDialog使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。
在下文中一共展示了DetailedErrorDialog类的6个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Python代码示例。
示例1: on_info_bar_clicked
def on_info_bar_clicked(self, *args):
if not self._errorMsgs:
return
label = _("The following software marked for installation has errors. "
"This is likely caused by an error with\nyour installation source. "
"You can change your installation source or quit the installer.")
dialog = DetailedErrorDialog(self.data,
buttons=[C_("GUI|Software Selection|Error Dialog", "_Quit"),
C_("GUI|Software Selection|Error Dialog", "_Cancel"),
C_("GUI|Software Selection|Error Dialog", "_Modify Software Source")],
label=label)
with enlightbox(self.window, dialog.window):
dialog.refresh(self._errorMsgs)
rc = dialog.run()
dialog.window.destroy()
if rc == 0:
# Quit.
sys.exit(0)
elif rc == 1:
# Close the dialog so the user can change selections.
pass
elif rc == 2:
# Send the user to the installation source spoke.
self.skipTo = "SourceSpoke"
self.window.emit("button-clicked")
else:
pass
开发者ID:pombreda，项目名称:anaconda，代码行数:30，代码来源:software.py
示例2: on_info_bar_clicked
def on_info_bar_clicked(self, *args):
if not self._errorMsgs:
return
label = _("The software marked for installation has the following errors. "
"This is likely caused by an error with your installation source. "
"You can quit the installer, change your software source, or change "
"your software selections.")
dialog = DetailedErrorDialog(self.data,
buttons=[C_("GUI|Software Selection|Error Dialog", "_Quit"),
C_("GUI|Software Selection|Error Dialog", "_Modify Software Source"),
C_("GUI|Software Selection|Error Dialog", "Modify _Selections")],
label=label)
with self.main_window.enlightbox(dialog.window):
dialog.refresh(self._errorMsgs)
rc = dialog.run()
dialog.window.destroy()
if rc == 0:
# Quit.
iutil.ipmi_report(constants.IPMI_ABORTED)
sys.exit(0)
elif rc == 1:
# Send the user to the installation source spoke.
self.skipTo = "SourceSpoke"
self.window.emit("button-clicked")
elif rc == 2:
# Close the dialog so the user can change selections.
pass
else:
pass
开发者ID:KosiehBarter，项目名称:anaconda，代码行数:32，代码来源:software.py
示例3: showDetailedError
def showDetailedError(self, message, details):
from pyanaconda.ui.gui.spokes.lib.detailederror import DetailedErrorDialog
dlg = DetailedErrorDialog(None, buttons=[_("_Quit")],
label=message)
with enlightbox(self._currentAction.window, dlg.window):
dlg.refresh(details)
rc = dlg.run()
dlg.window.destroy()
开发者ID:joesaland，项目名称:qubes-installer-qubes-os，代码行数:9，代码来源:__init__.py
示例4: showDetailedError
def showDetailedError(self, message, details, buttons=None):
from pyanaconda.ui.gui.spokes.lib.detailederror import DetailedErrorDialog
buttons = buttons or [_("_Quit")]
dlg = DetailedErrorDialog(None, buttons=buttons, label=message)
with self.mainWindow.enlightbox(dlg.window):
dlg.refresh(details)
rc = dlg.run()
dlg.window.destroy()
return rc
开发者ID:cyclefusion，项目名称:anaconda，代码行数:10，代码来源:__init__.py
示例5: on_info_bar_clicked
def on_info_bar_clicked(self, *args):
if self.errors:
label = _("The following errors were encountered when checking your storage "
"configuration. You can modify your storage layout or quit the "
"installer.")
dialog = DetailedErrorDialog(self.data, buttons=[_("_Quit"), _("_Modify Storage Layout")], label=label)
with enlightbox(self.window, dialog.window):
errors = "\n".join(self.errors)
dialog.refresh(errors)
rc = dialog.run()
dialog.window.destroy()
if rc == 0:
# Quit.
sys.exit(0)
elif self.warnings:
label = _("The following warnings were encountered when checking your storage "
"configuration. These are not fatal, but you may wish to make "
"changes to your storage layout.")
dialog = DetailedErrorDialog(self.data, buttons=[_("_OK")], label=label)
with enlightbox(self.window, dialog.window):
warnings = "\n".join(self.warnings)
dialog.refresh(warnings)
rc = dialog.run()
dialog.window.destroy()
开发者ID:cs2c-zhangchao，项目名称:nkwin1.0-anaconda，代码行数:29，代码来源:storage.py
示例6: on_info_bar_clicked
def on_info_bar_clicked(self, *args):
if self.disks_errors:
label = _("The following errors were encountered when checking your disk "
"selection. You can modify your selection or quit the "
"installer.")
dialog = DetailedErrorDialog(self.data, buttons=[
C_("GUI|Storage|Error Dialog", "_Quit"),
C_("GUI|Storage|Error Dialog", "_Modify Disk Selection")],
label=label)
with self.main_window.enlightbox(dialog.window):
errors = "\n".join(self.disks_errors)
dialog.refresh(errors)
rc = dialog.run()
dialog.window.destroy()
if rc == 0:
# Quit.
iutil.ipmi_report(constants.IPMI_ABORTED)
sys.exit(0)
elif self.errors:
label = _("The following errors were encountered when checking your storage "
"configuration. You can modify your storage layout or quit the "
"installer.")
dialog = DetailedErrorDialog(self.data, buttons=[
C_("GUI|Storage|Error Dialog", "_Quit"),
C_("GUI|Storage|Error Dialog", "_Modify Storage Layout")],
label=label)
with self.main_window.enlightbox(dialog.window):
errors = "\n".join(self.errors)
dialog.refresh(errors)
rc = dialog.run()
dialog.window.destroy()
if rc == 0:
# Quit.
iutil.ipmi_report(constants.IPMI_ABORTED)
sys.exit(0)
elif self.warnings:
label = _("The following warnings were encountered when checking your storage "
"configuration. These are not fatal, but you may wish to make "
"changes to your storage layout.")
dialog = DetailedErrorDialog(self.data,
buttons=[C_("GUI|Storage|Warning Dialog", "_OK")], label=label)
with self.main_window.enlightbox(dialog.window):
warnings = "\n".join(self.warnings)
dialog.refresh(warnings)
rc = dialog.run()
dialog.window.destroy()
开发者ID:fabiand，项目名称:anaconda-1，代码行数:55，代码来源:storage.py
注：本文中的pyanaconda.ui.gui.spokes.lib.detailederror.DetailedErrorDialog类示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论