本文整理汇总了Python中pybvc.common.utils.load_dict_from_file函数的典型用法代码示例。如果您正苦于以下问题：Python load_dict_from_file函数的具体用法？Python load_dict_from_file怎么用？Python load_dict_from_file使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了load_dict_from_file函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Python代码示例。
示例1: of_demo_3
def of_demo_3():
f = "cfg.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo 3 Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("\n")
print ("<<< Creating Controller instance")
time.sleep(rundelay)
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd, None)
print ("'Controller':")
print ctrl.brief_json()
print ("\n")
print ("<<< Get detailed information about ports on OpenFlow node '%s'"
% nodeName)
time.sleep(rundelay)
ofswitch = OFSwitch(ctrl, nodeName)
result = ofswitch.get_ports_list()
status = result.get_status()
if(status.eq(STATUS.OK)):
ports = result.get_data()
for port in ports:
result = ofswitch.get_port_detail_info(port)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("Port '%s' info:" % port)
info = result.get_data()
print json.dumps(info, indent=4)
else:
print ("\n")
print ("!!!Demo terminated, reason: %s"
% status.brief().lower())
exit(0)
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print ("\n")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print (">>> Demo End")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
开发者ID:pruiksmalw，项目名称:pybvc，代码行数:60，代码来源:demo3.py
示例2: nc_demo_7
def nc_demo_7():
f = "cfg1.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("\n")
print ("<<< Creating Controller instance")
time.sleep(rundelay)
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
print ("'Controller':")
print ctrl.to_json()
print "\n"
print ("<<< Show a particular configuration module on the Controller")
moduleType = "opendaylight-rest-connector:rest-connector-impl"
moduleName = "rest-connector-default-impl"
print (" (module type: %s,\n module name: %s)"
% (moduleType, moduleName))
time.sleep(rundelay)
result = ctrl.get_module_operational_state(moduleType, moduleName)
status = result.get_status()
if(status.eq(STATUS.OK)):
print "Module:"
slist = result.get_data()
print json.dumps(slist, default=lambda o: o.__dict__,
sort_keys=True, indent=4)
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief())
exit(0)
print ("\n")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print (">>> Demo End")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
开发者ID:pruiksmalw，项目名称:pybvc，代码行数:54，代码来源:ctrl_demo7.py
示例3: nc_demo_2
def nc_demo_2():
f = "cfg1.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("\n")
print ("<<< Creating Controller instance")
time.sleep(rundelay)
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
print ("'Controller':")
print ctrl.to_json()
print "\n"
yangModelName = "flow-topology-discovery"
yangModelVerson = "2013-08-19"
print ("<<< Retrieve '%s' YANG model definition "
"from the Controller" % yangModelName)
time.sleep(rundelay)
nodeName = "controller-config"
result = ctrl.get_schema(nodeName, yangModelName, yangModelVerson)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("YANG model:")
schema = result.get_data()
print schema
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief())
exit(0)
print ("\n")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print (">>> Demo End")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
开发者ID:pruiksmalw，项目名称:pybvc，代码行数:53，代码来源:ctrl_demo2.py
示例4: nc_demo_4
def nc_demo_4():
f = "cfg1.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("\n")
print ("<<< Creating Controller instance")
time.sleep(rundelay)
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
print ("'Controller':")
print ctrl.to_json()
print "\n"
name = "opendaylight-md-sal-binding:binding-data-broker"
print ("<<< Get '%s' service provider info" % name)
time.sleep(rundelay)
result = ctrl.get_service_provider_info(name)
status = result.get_status()
if(status.eq(STATUS.OK)):
print "Service provider:"
service = result.get_data()
print json.dumps(service, default=lambda o: o.__dict__,
sort_keys=True, indent=4)
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief())
exit(0)
print ("\n")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print (">>> Demo End")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
开发者ID:pruiksmalw，项目名称:pybvc，代码行数:51，代码来源:ctrl_demo4.py
示例5: nc_demo_8
def nc_demo_8():
f = "cfg1.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("\n")
print ("<<< Creating Controller instance")
time.sleep(rundelay)
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
print ("'Controller':")
print ctrl.to_json()
print "\n"
print ("<<< Show sessions running on the Controller ")
nodeName = "controller-config"
time.sleep(rundelay)
result = ctrl.get_sessions_info(nodeName)
status = result.get_status()
if(status.eq(STATUS.OK)):
print "Sessions:"
slist = result.get_data()
print json.dumps(slist, default=lambda o: o.__dict__,
sort_keys=True, indent=4)
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief())
exit(0)
print ("\n")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print (">>> Demo End")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
开发者ID:pruiksmalw，项目名称:pybvc，代码行数:51，代码来源:ctrl_demo8.py
示例6: setUp
def setUp(self):
f = "cfg1.yml"
d = {}
if not (load_dict_from_file(f, d)):
print ("Config file '%s' read error: " % f)
exit()
try:
self.ctrlIpAddr = d["ctrlIpAddr"]
self.ctrlPortNum = d["ctrlPortNum"]
self.ctrlUname = d["ctrlUname"]
self.ctrlPswd = d["ctrlPswd"]
self.rundelay = d["rundelay"]
except:
print ("Failed to get Controller device attributes")
exit(0)
开发者ID:jebpublic，项目名称:pybvc，代码行数:15，代码来源:unit_test_controller.py
示例7: of_demo_11
def of_demo_11():
f = "cfg.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo 11 Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
# --- Flow Match: Ethernet Source Address
# Ethernet Destination Address
# IPv4 Source Address
# IPv4 Destination Address
# ICMPv4 Type
# ICMPv4 Code
# IP DSCP
# IP ECN
# Input Port
# NOTE: Ethernet type MUST be 2048 (0x800) -> IPv4 protocol
# IP Protocol Type MUST be 1 -> ICMP
eth_type = ETH_TYPE_IPv4
eth_src = "00:00:00:11:23:ae"
eth_dst = "00:ff:20:01:1a:3d"
ipv4_src = "17.1.2.3/8"
ipv4_dst = "172.168.5.6/18"
ip_proto = IP_PROTO_ICMP
ip_dscp = IP_DSCP_CS2 # 'Class Selector' = 'Immediate'
ip_ecn = IP_ECN_CE # Congestion Encountered
icmpv4_type = 6 # Alternate Host Address
icmpv4_code = 3 # Alternate Address for Host
input_port = 10
print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'"
% (ctrlIpAddr, nodeName))
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Ethernet Type (%s)\n"
" Ethernet Source Address (%s)\n"
" Ethernet Destination Address (%s)\n"
" IPv4 Source Address (%s)\n"
" IPv4 Destination Address (%s)\n"
" IP Protocol Number (%s)\n"
" IP DSCP (%s)\n"
" IP ECN (%s)\n"
" ICMPv4 Type (%s)\n"
" ICMPv4 Code (%s)\n"
" Input Port (%s)"
% (hex(eth_type), eth_src,
eth_dst, ipv4_src, ipv4_dst,
ip_proto, ip_dscp, ip_ecn,
icmpv4_type, icmpv4_code,
input_port))
print (" Action: Output (NORMAL)")
time.sleep(rundelay)
flow_entry = FlowEntry()
table_id = 0
flow_entry.set_flow_table_id(table_id)
flow_id = 18
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_hard_timeout(0)
flow_entry.set_flow_idle_timeout(0)
flow_entry.set_flow_priority(1009)
# --- Instruction: 'Apply-actions'
# Action: 'Output' NORMAL
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port="NORMAL")
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Ethernet Source Address
# Ethernet Destination Address
# IPv4 Source Address
# IPv4 Destination Address
# IP Protocol Number
# IP DSCP
# IP ECN
# ICMPv4 Type
#.........这里部分代码省略.........
开发者ID:pruiksmalw，项目名称:pybvc，代码行数:101，代码来源:demo11.py
示例8: vr_demo_2
def vr_demo_2():
f = "cfg4.yml"
d = {}
if load_dict_from_file(f, d) is False:
print ("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d["ctrlIpAddr"]
ctrlPortNum = d["ctrlPortNum"]
ctrlUname = d["ctrlUname"]
ctrlPswd = d["ctrlPswd"]
nodeName = d["nodeName"]
nodeIpAddr = d["nodeIpAddr"]
nodePortNum = d["nodePortNum"]
nodeUname = d["nodeUname"]
nodePswd = d["nodePswd"]
rundelay = d["rundelay"]
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("\n")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
vrouter = VRouter5600(ctrl, nodeName, nodeIpAddr, nodePortNum, nodeUname, nodePswd)
print ("<<< 'Controller': %s, '%s': %s" % (ctrlIpAddr, nodeName, nodeIpAddr))
print ("\n")
time.sleep(rundelay)
node_configured = False
result = ctrl.check_node_config_status(nodeName)
status = result.get_status()
if status.eq(STATUS.NODE_CONFIGURED):
node_configured = True
print ("<<< '%s' is configured on the Controller" % nodeName)
elif status.eq(STATUS.DATA_NOT_FOUND):
node_configured = False
else:
print ("\n")
print "Failed to get configuration status for the '%s'" % nodeName
print ("!!!Demo terminated, reason: %s" % status.detailed())
exit(0)
if node_configured is False:
result = ctrl.add_netconf_node(vrouter)
status = result.get_status()
if status.eq(STATUS.OK):
print ("<<< '%s' added to the Controller" % nodeName)
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.detailed())
exit(0)
print ("\n")
time.sleep(rundelay)
result = ctrl.check_node_conn_status(nodeName)
status = result.get_status()
if status.eq(STATUS.NODE_CONNECTED):
print ("<<< '%s' is connected to the Controller" % nodeName)
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print "\n"
yangModelName = "vyatta-security-firewall"
yangModelVerson = "2014-11-07"
print ("<<< Retrieve '%s' YANG model definition from the '%s'" % (yangModelName, nodeName))
time.sleep(rundelay)
result = vrouter.get_schema(yangModelName, yangModelVerson)
status = result.get_status()
if status.eq(STATUS.OK):
print "YANG model definition:"
schema = result.get_data()
print schema
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print "\n"
print (">>> Remove '%s' NETCONF node from the Controller" % nodeName)
time.sleep(rundelay)
result = ctrl.delete_netconf_node(vrouter)
status = result.get_status()
if status.eq(STATUS.OK):
print ("'%s' NETCONF node was successfully removed " "from the Controller" % nodeName)
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief())
exit(0)
print "\n"
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
#.........这里部分代码省略.........
开发者ID:jebpublic，项目名称:pybvc，代码行数:101，代码来源:vr_demo2.py
示例9: of_demo_15
def of_demo_15():
f = "cfg.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo 15 Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
# --- Flow Match: Ethernet Type
# VLAN ID
# Input Port
eth_type = ETH_TYPE_IPv4
vlan_id = 100
input_port = 3
# --- Flow Actions: Push VLAN: Ethernet Type
# Set Field: VLAN ID
# Output: Port Number
push_eth_type = ETH_TYPE_DOT1AD # 802.1ad VLAN tagged frame
push_vlan_id = 200
output_port = 5
print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Ethernet Type (%s)\n"
" VLAN ID (%s)\n"
" Input Port (%s)" %
(hex(eth_type), vlan_id, input_port))
print (" Action: Push VLAN (Ethernet Type=%s)" %
(hex(push_eth_type)))
print (" Set Field (VLAN ID=%s)" %
(push_vlan_id))
print (" Output (to Physical Port Number %s)" %
(output_port))
time.sleep(rundelay)
flow_entry = FlowEntry()
flow_entry.set_flow_name(flow_name="Push VLAN")
table_id = 0
flow_entry.set_flow_table_id(table_id)
flow_id = 22
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_priority(flow_priority=1013)
flow_entry.set_flow_cookie(cookie=407)
flow_entry.set_flow_cookie_mask(cookie_mask=255)
flow_entry.set_flow_hard_timeout(hard_timeout=3400)
flow_entry.set_flow_idle_timeout(idle_timeout=3400)
# --- Instruction: 'Apply-actions'
# Actions: 'PushVlan'
# 'SetField'
# 'Output'
instruction = Instruction(instruction_order=0)
action = PushVlanHeaderAction(order=0)
action.set_eth_type(eth_type=push_eth_type)
instruction.add_apply_action(action)
action = SetFieldAction(order=1)
action.set_vlan_id(vid=push_vlan_id)
instruction.add_apply_action(action)
action = OutputAction(order=2, port=output_port)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Ethernet Source Address
# Ethernet Destination Address
# Input Port
match = Match()
match.set_eth_type(eth_type)
match.set_vlan_id(vlan_id)
match.set_in_port(in_port=input_port)
flow_entry.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
#.........这里部分代码省略.........
开发者ID:BillTheBest，项目名称:pybvc，代码行数:101，代码来源:demo15.py
示例10: of_demo_23
def of_demo_23():
f = "cfg.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo 23 Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
# --- Flow Match: Ethernet Type
# Input Port
# IPv4 Destination Address
eth_type = ETH_TYPE_MPLS_UCAST
in_port = 13
mpls_label = 27
# --- Flow Actions: Set Field
# Output
new_mpls_label = 44
output_port = 14
print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Ethernet Type (%s)\n"
" Input Port (%s)\n"
" MPLS Label (%s)" %
(hex(eth_type), in_port, mpls_label))
print (" Action: Set Field (MPLS Label %s)\n"
" Output (Physical Port number %s)" %
(new_mpls_label, output_port))
time.sleep(rundelay)
flow_entry = FlowEntry()
table_id = 0
flow_id = 29
flow_entry.set_flow_table_id(table_id)
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_name(flow_name="Change MPLS Label")
flow_entry.set_flow_hard_timeout(hard_timeout=0)
flow_entry.set_flow_idle_timeout(idle_timeout=0)
flow_entry.set_flow_priority(flow_priority=1022)
flow_entry.set_flow_cookie(cookie=401)
flow_entry.set_flow_cookie_mask(cookie_mask=255)
# --- Instruction: 'Apply-actions'
# Actions: 'Set Field'
# 'Output'
instruction = Instruction(instruction_order=0)
action = SetFieldAction(order=0)
action.set_mpls_label(new_mpls_label)
instruction.add_apply_action(action)
action = OutputAction(order=1, port=2)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Input Port
# MPLS Label
match = Match()
match.set_eth_type(eth_type)
match.set_in_port(in_port)
match.set_mpls_label(mpls_label)
flow_entry.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully added to the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.detailed())
exit(0)
print ("\n")
print ("<<< Get configured flow from the Controller")
time.sleep(rundelay)
#.........这里部分代码省略.........
开发者ID:BillTheBest，项目名称:pybvc，代码行数:101，代码来源:demo23.py
示例11: of_demo_34
def of_demo_34():
f = "cfg.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
openflow_node_ids = []
openflow_nodes = []
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo 34 Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
print "\n".strip()
print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'"
% (ctrlIpAddr, nodeName))
grp_ids_cfg = []
grp_ids_oper = []
print "\n".strip()
print ("<<< Get OpenFlow Groups Information")
time.sleep(rundelay)
result = ofswitch.get_configured_group_ids()
status = result.get_status()
if(status.eq(STATUS.OK)):
grp_ids_cfg = result.get_data()
elif(status.eq(STATUS.DATA_NOT_FOUND)):
grp_ids_cfg = []
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.detailed())
exit(0)
result = ofswitch.get_operational_group_ids()
status = result.get_status()
if(status.eq(STATUS.OK)):
grp_ids_oper = result.get_data()
elif(status.eq(STATUS.DATA_NOT_FOUND)):
grp_ids_oper = []
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.detailed())
exit(0)
# Show current state of the Group Table in the Controller's
# configuration and operational data stores
print_groups(grp_ids_cfg, grp_ids_oper)
# Create new group
group_id = 13
group_type = OFPGT_SELECT
group_name = "Example of 'load balancing' group"
weight1 = 60
weight2 = 30
weight3 = 10
out_port1 = 110
out_port2 = 111
out_port3 = 112
print "\n".strip()
print ("<<< Create Group")
print "\n".strip()
print (" Group Type : %s\n"
" Group ID : %s\n"
" Group Name : \"%s\"" % (group_type.strip('group-').upper(),
group_id, group_name))
print (" Buckets :")
print (" [0] weight : %s"
% weight1)
print (" actions: Output (%s)"
% out_port1)
print (" [1] weight : %s"
% weight2)
print (" actions: Output (%s)"
% out_port2)
print (" [2] weight : %s"
% weight3)
print (" actions: Output (%s)"
% out_port3)
time.sleep(rundelay)
#.........这里部分代码省略.........
开发者ID:pruiksmalw，项目名称:pybvc，代码行数:101，代码来源:demo34.py
示例12: of_demo_12
def of_demo_12():
f = "cfg.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo 12 Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
# --- Flow Match: Ethernet Source Address
# Ethernet Destination Address
# ARP Operation
# ARP Source IPv4 Address
# ARP Target IPv4 Address
# ARP source hardware address
# ARP target hardware address
# NOTE: Ethernet type MUST be 2054 (0x0806) -> ARP protocol
eth_type = ETH_TYPE_ARP
eth_src = "00:ab:fe:01:03:31"
eth_dst = "ff:ff:ff:ff:ff:ff"
arp_opcode = ARP_REQUEST
arp_src_ipv4_addr = "192.168.4.1/32"
arp_tgt_ipv4_addr = "10.21.22.23/32"
arp_src_hw_addr = "12:34:56:78:98:ab"
arp_tgt_hw_addr = "fe:dc:ba:98:76:54"
print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Ethernet Type (%s)\n"
" Ethernet Source Address (%s)\n"
" Ethernet Destination Address (%s)\n"
" ARP Operation (%s)\n"
" ARP Source IPv4 Address (%s)\n"
" ARP Target IPv4 Address (%s)\n"
" ARP Source Hardware Address (%s)\n"
" ARP Target Hardware Address (%s)" %
(hex(eth_type), eth_src,
eth_dst, arp_opcode,
arp_src_ipv4_addr,
arp_tgt_ipv4_addr,
arp_src_hw_addr,
arp_tgt_hw_addr))
print (" Action: Output (CONTROLLER)")
time.sleep(rundelay)
flow_entry = FlowEntry()
table_id = 0
flow_entry.set_flow_table_id(table_id)
flow_id = 19
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_hard_timeout(0)
flow_entry.set_flow_idle_timeout(0)
flow_entry.set_flow_priority(1010)
# --- Instruction: 'Apply-actions'
# Action: 'Output' CONTROLLER
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port="CONTROLLER")
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Ethernet Source Address
# Ethernet Destination Address
# ARP Operation
# ARP Source IPv4 Address
# ARP Target IPv4 Address
# ARP Source Hardware Address
# ARP Target Hardware Address
match = Match()
match.set_eth_type(eth_type)
match.set_eth_src(eth_src)
match.set_eth_dst(eth_dst)
match.set_arp_opcode(arp_opcode)
match.set_arp_src_transport_address(arp_src_ipv4_addr)
match.set_arp_tgt_transport_address(arp_tgt_ipv4_addr)
match.set_arp_src_hw_address(arp_src_hw_addr)
match.set_arp_tgt_hw_address(arp_tgt_hw_addr)
flow_entry.add_match(match)
#.........这里部分代码省略.........
开发者ID:BillTheBest，项目名称:pybvc，代码行数:101，代码来源:demo12.py
示例13: of_demo_32
def of_demo_32():
f = "cfg.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit(0)
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
openflow_node_ids = []
openflow_nodes = []
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo 32 Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print "\n"
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
print ("<<< Controller '%s:%s'" % (ctrlIpAddr, ctrlPortNum))
time.sleep(rundelay)
print "\n".strip()
print ("<<< Get OpenFlow switches information")
time.sleep(rundelay)
inv_obj = None
result = ctrl.build_inventory_object()
status = result.get_status()
if(status.eq(STATUS.OK)):
inv_obj = result.get_data()
assert(isinstance(inv_obj, Inventory))
else:
print ("\n")
print ("!!!Error, failed to obtain inventory info, reason: %s"
% status.brief().lower())
exit(0)
assert(inv_obj)
openflow_node_ids = inv_obj.get_openflow_node_ids()
for node_id in openflow_node_ids:
node = inv_obj.get_openflow_node(node_id)
assert(isinstance(node, OpenFlowCapableNode))
openflow_nodes.append(node)
print "\n".strip()
print ("<<< OpenFlow switches in the inventory store")
s1 = 'IP Address'
s2 = 'OpenFlow Id'
sym = '-'
print "\n".strip()
print " {0:<15} {1:<30}".format(s1, s2)
print " {0:<15} {1:<30}".format(sym*15, sym*30)
for node in openflow_nodes:
addr = node.get_ip_address()
node_id = node.get_id()
print " {0:<15} {1:<30}".format(addr, node_id)
print "\n".strip()
print ("<<< Get Group Table Information")
time.sleep(rundelay)
for node in openflow_nodes:
assert(isinstance(node, OpenFlowCapableNode))
print "\n".strip()
switch_id = node.get_id()
print (" Switch '%s'") % switch_id
print "\n".strip()
group_features = node.get_group_features()
assert(isinstance(group_features, GroupFeatures))
q = 2 # number of list items to be in a single chunk (output string)
s = 'Max groups'
alist = group_features.get_max_groups()
if alist:
chunks = [alist[x:x+q] for x in xrange(0, len(alist), q)]
print " %s :" % s,
for i in range(0, len(chunks)):
n = 0 if i == 0 else len(s) + 19
print "%s%s" % (" "*n, ", ".join(map(str, chunks[i])))
else:
print " %s : %s" % (s, "n/a")
s = 'Group types'
alist = group_features.get_types()
if alist:
chunks = [alist[x:x+q] for x in xrange(0, len(alist), q)]
print " %s :" % s,
for i in range(0, len(chunks)):
n = 0 if i == 0 else len(s) + 18
print "%s%s" % (" "*n, ", ".join(chunks[i]))
#.........这里部分代码省略.........
开发者ID:pruiksmalw，项目名称:pybvc，代码行数:101，代码来源:demo32.py
示例14: of_demo_26
def of_demo_26():
f = "cfg.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo 26 Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
flow_table_id = 0
flow_id_base = 12
flow_id = flow_id_base
flowEntries = []
# Sample flow entry
flow_entry = FlowEntry()
flow_entry.set_flow_cookie(6001)
flow_entry.set_flow_table_id(flow_table_id)
flow_entry.set_flow_id(flow_id)
flow_id += 1
flow_entry.set_flow_idle_timeout(12000)
flow_entry.set_flow_hard_timeout(12000)
flow_entry.set_flow_priority(1000)
instruction = Instruction(instruction_order=0)
action = DropAction(order=0)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
match = Match()
match.set_eth_type(ETH_TYPE_ARP)
match.set_eth_src("00:11:22:33:44:55")
match.set_eth_dst("aa:bb:cc:dd:ee:ff")
flow_entry.add_match(match)
flowEntries.append(flow_entry)
# Sample flow entry
flow_entry = FlowEntry()
flow_entry.set_flow_cookie(7001)
flow_entry.set_flow_table_id(flow_table_id)
flow_entry.set_flow_id(flow_id)
flow_id += 1
flow_entry.set_flow_idle_timeout(2400)
flow_entry.set_flow_hard_timeout(2400)
|
客服电话
APP下载
官方微信
请发表评论