本文整理汇总了C#中ILevelGeometry类的典型用法代码示例。如果您正苦于以下问题：C# ILevelGeometry类的具体用法？C# ILevelGeometry怎么用？C# ILevelGeometry使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。
ILevelGeometry类属于命名空间，在下文中一共展示了ILevelGeometry类的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C#代码示例。
示例1: EndPointerSequenceCore
protected override void EndPointerSequenceCore(PointerEventInfo info, ILevelGeometry viewport)
{
switch (info.Type) {
case PointerEventType.Primary:
EndSelectTilesSequence(info, viewport);
break;
}
}
开发者ID:JuliaABurch，项目名称:Treefrog，代码行数:8，代码来源:TileSelectTool.cs
示例2: StartPointerSequenceCore
protected override void StartPointerSequenceCore(PointerEventInfo info, ILevelGeometry viewport)
{
switch (info.Type) {
case PointerEventType.Primary:
StartFillSequence(info);
break;
}
UpdatePointerSequence(info, viewport);
}
开发者ID:jaquadro，项目名称:Treefrog，代码行数:10，代码来源:TileFillTool.cs
示例3: EndPointerSequenceCore
protected override void EndPointerSequenceCore(PointerEventInfo info, ILevelGeometry viewport)
{
_state = _state.EndPointerSequence(info, viewport);
/*switch (info.Type) {
case PointerEventType.Primary:
EndSelectObjectSequence(info, viewport);
break;
}*/
}
开发者ID:Elof3，项目名称:Treefrog，代码行数:10，代码来源:ObjectSelectTool.cs
示例4: PointerPositionCore
protected override void PointerPositionCore(PointerEventInfo info, ILevelGeometry viewport)
{
TileCoord location = TileLocation(info);
if (!TileInRange(location) || _inAreaSequence) {
HidePreviewMarker();
return;
}
ShowPreviewMarker(location);
}
开发者ID:jaquadro，项目名称:Treefrog，代码行数:10，代码来源:TileEraseTool.cs
示例5: EndPointerSequenceCore
protected override void EndPointerSequenceCore(PointerEventInfo info, ILevelGeometry viewport)
{
switch (info.Type) {
case PointerEventType.Primary:
EndErasePathSequence(info);
break;
case PointerEventType.Secondary:
EndEraseAreaSequence(info, viewport);
break;
}
}
开发者ID:jaquadro，项目名称:Treefrog，代码行数:11，代码来源:TileEraseTool.cs
示例6: StartPointerSequenceCore
protected override void StartPointerSequenceCore(PointerEventInfo info, ILevelGeometry viewport)
{
switch (info.Type) {
case PointerEventType.Primary:
StartSelectTilesSequence(info, viewport);
break;
case PointerEventType.Secondary:
DefloatSelection();
break;
}
UpdatePointerSequence(info, viewport);
}
开发者ID:JuliaABurch，项目名称:Treefrog，代码行数:13，代码来源:TileSelectTool.cs
示例7: StartPointerSequenceCore
protected override void StartPointerSequenceCore(PointerEventInfo info, ILevelGeometry viewport)
{
switch (info.Type) {
case PointerEventType.Primary:
StartDrawObjectSequence(info);
break;
case PointerEventType.Secondary:
Cancel();
break;
}
UpdatePointerSequence(info, viewport);
}
开发者ID:JuliaABurch，项目名称:Treefrog，代码行数:13，代码来源:ObjectDrawTool.cs
示例8: StartPointerSequenceCore
protected override void StartPointerSequenceCore(PointerEventInfo info, ILevelGeometry viewport)
{
_state = _state.StartPointerSequence(info, viewport);
/*switch (info.Type) {
case PointerEventType.Primary:
StartSelectObjectSequence(info, viewport);
break;
case PointerEventType.Secondary:
_selectionManager.ClearSelection();
if (_rotationAnnot != null) {
_annots.Remove(_rotationAnnot);
_rotationAnnot = null;
}
UpdatePropertyProvider();
break;
}*/
UpdatePointerSequence(info, viewport);
}
开发者ID:JuliaABurch，项目名称:Treefrog，代码行数:20，代码来源:ObjectSelectTool.cs
示例9: StartEraseAreaSequence
private void StartEraseAreaSequence(PointerEventInfo info, ILevelGeometry viewport)
{
HidePreviewMarker();
TileCoord location = TileLocation(info);
int x = (int)(location.X * Layer.TileWidth);
int y = (int)(location.Y * Layer.TileHeight);
_band = new RubberBand(new Point(location.X, location.Y));
_selection = new SelectionAnnot(new Point(x, y))
{
Fill = new SolidColorBrush(new Color(192, 0, 0, 128)),
//Outline = new Pen(new SolidColorBrush(new Color(192, 0, 0, 200))),
};
_annots.Add(_selection);
_inAreaSequence = true;
StartAutoScroll(info, viewport);
}
开发者ID:jaquadro，项目名称:Treefrog，代码行数:21，代码来源:TileEraseTool.cs
示例10: EndEraseAreaSequence
private void EndEraseAreaSequence(PointerEventInfo info, ILevelGeometry viewport)
{
Rectangle selection = _band.Selection;
int xmin = Math.Max(Layer.TileOriginX, selection.Left);
int ymin = Math.Max(Layer.TileOriginY, selection.Top);
int xmax = Math.Min(Layer.TileOriginX + Layer.TilesWide, selection.Right);
int ymax = Math.Min(Layer.TileOriginY + Layer.TilesHigh, selection.Bottom);
TileReplace2DCommand command = new TileReplace2DCommand(Layer);
for (int x = xmin; x < xmax; x++) {
for (int y = ymin; y < ymax; y++) {
command.QueueReplacement(new TileCoord(x, y), (TileStack)null);
Layer[new TileCoord(x, y)] = null;
}
}
History.Execute(command);
_annots.Remove(_selection);
_inAreaSequence = false;
EndAutoScroll(info, viewport);
}
开发者ID:jaquadro，项目名称:Treefrog，代码行数:23，代码来源:TileEraseTool.cs
示例11: StartDrag
private ToolState StartDrag(PointerEventInfo info, ILevelGeometry viewport)
{
Tool._selectionManager.ClearSelection();
return StartDragAdd(info, viewport);
}
开发者ID:Elof3，项目名称:Treefrog，代码行数:5，代码来源:ObjectSelectTool.cs
示例12: UpdateDrag
private void UpdateDrag(PointerEventInfo info, ILevelGeometry viewport)
{
TileCoord location = TileLocation(info);
_band.End = new Point(location.X, location.Y);
Rectangle selection = _band.Selection;
_selectionAnnot.Start = new Point(selection.Left * Layer.TileWidth, selection.Top * Layer.TileHeight);
_selectionAnnot.End = new Point(selection.Right * Layer.TileWidth, selection.Bottom * Layer.TileHeight);
//UpdateAutoScroll(info, viewport);
}
开发者ID:jaquadro，项目名称:Treefrog，代码行数:12，代码来源:TileDrawTool.cs
示例13: StartDrag
private void StartDrag(PointerEventInfo info, ILevelGeometry viewport)
{
ClearPreviewMarker();
_activeBrush = null;
TileCoord location = TileLocation(info);
int x = (int)(location.X * Layer.TileWidth);
int y = (int)(location.Y * Layer.TileHeight);
_band = new RubberBand(new Point(location.X, location.Y));
_selectionAnnot = new SelectionAnnot(new Point((int)info.X, (int)info.Y)) {
Fill = new SolidColorBrush(new Color(76, 178, 255, 128)),
};
_annots.Add(_selectionAnnot);
//StartAutoScroll(info, viewport);
}
开发者ID:jaquadro，项目名称:Treefrog，代码行数:19，代码来源:TileDrawTool.cs
示例14: StartSecondaryPointerSequence
private ToolState StartSecondaryPointerSequence(PointerEventInfo info, ILevelGeometry viewport)
{
ObjectInstance hitObject = Tool.TopObject(Tool.CoarseHitTest((int)info.X, (int)info.Y));
if (hitObject == null)
return new ReleaseToolState(Tool).StartPointerSequence(info, viewport);
Tool.ActivateObjectMenu(info);
if (Tool._selectionManager.IsObjectSelected(hitObject))
return this;
else
return StartClickNew(info, viewport, hitObject);
}
开发者ID:Elof3，项目名称:Treefrog，代码行数:13，代码来源:ObjectSelectTool.cs
示例15: StartClickRemove
private ToolState StartClickRemove(PointerEventInfo info, ILevelGeometry viewport, ObjectInstance obj)
{
Tool._selectionManager.RemoveObjectFromSelection(obj);
Tool.StartAutoScroll(info, viewport);
Tool.UpdatePropertyProvider();
return new SelectionStandbyToolState(Tool).StartPointerSequence(info, viewport);
}
开发者ID:Elof3，项目名称:Treefrog，代码行数:9，代码来源:ObjectSelectTool.cs
示例16: UpdatePointerSequence
public virtual ToolState UpdatePointerSequence(PointerEventInfo info, ILevelGeometry viewport)
{
return this;
}
开发者ID:Elof3，项目名称:Treefrog，代码行数:4，代码来源:ObjectSelectTool.cs
示例17: StartPointerSequence
public override ToolState StartPointerSequence(PointerEventInfo info, ILevelGeometry viewport)
{
InitialLocation = new Point((int)info.X, (int)info.Y);
Timeout = DateTime.Now;
return this;
}
开发者ID:Elof3，项目名称:Treefrog，代码行数:7，代码来源:ObjectSelectTool.cs
示例18: PointerPositionCore
protected override void PointerPositionCore(PointerEventInfo info, ILevelGeometry viewport)
{
if (_snapManager == null)
_snapManager = new SnappingManager(GetSnappingSourceOrigin(), GetSnappingSourceBounds(), GridSize);
}
开发者ID:jaquadro，项目名称:Treefrog，代码行数:5，代码来源:ObjectPointerTool.cs
示例19: EndPointerSequence
public override ToolState EndPointerSequence(PointerEventInfo info, ILevelGeometry viewport)
{
if ((DateTime.Now - Timeout).TotalMilliseconds < _timeoutThreshold)
return new RotationStandbyToolState(Tool) {
HitObject = HitObject
}.EndPointerSequence(info, viewport);
else
return new SelectionStandbyToolState(Tool).EndPointerSequence(info, viewport);
}
开发者ID:Elof3，项目名称:Treefrog，代码行数:9，代码来源:ObjectSelectTool.cs
示例20: StartDragAdd
private ToolState StartDragAdd(PointerEventInfo info, ILevelGeometry viewport)
{
return new SelectionAreaToolState(Tool).StartPointerSequence(info, viewport);
}
开发者ID:Elof3，项目名称:Treefrog，代码行数:4，代码来源:ObjectSelectTool.cs
注：本文中的ILevelGeometry类示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论