本文整理汇总了Golang中github.com/aerospike/aerospike-client-go.NewBin函数的典型用法代码示例。如果您正苦于以下问题:Golang NewBin函数的具体用法?Golang NewBin怎么用?Golang NewBin使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了NewBin函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的Golang代码示例。
示例1: send
func send(cache []Event) {
fmt.Println("sending %s", len(cache))
for index, element := range cache {
_ = index
//fmt.Println(element.id, element.event, element.value)
//fmt.Println(index)
key, _ := as.NewKey("test", "totals", "total_votes")
ops := []*as.Operation{
as.AddOp(as.NewBin("total_votes", 1)), // add the value of the bin to the existing value
as.GetOp(), // get the value of the record after all operations are executed
}
_, _ = client.Operate(nil, key, ops...)
key, _ = as.NewKey("test", "totals", element.value)
ops = []*as.Operation{
as.AddOp(as.NewBin(element.value, 1)), // add the value of the bin to the existing value
as.GetOp(), // get the value of the record after all operations are executed
}
_, _ = client.Operate(nil, key, ops...)
//panicOnError(err)
//fmt.Println(rec)
// client.Set(element.id, element.value)
// client.Get(element.id)
// client.Incr("total_votes")
// client.Incr(element.value)
}
}
开发者ID:altoplano,项目名称:real_time_vote_benchmark,代码行数:30,代码来源:aerospike.go
示例2: runExample
func runExample(client *as.Client) {
// Write initial record.
key, _ := as.NewKey(*shared.Namespace, *shared.Set, "opkey")
bin1 := as.NewBin("optintbin", 7)
bin2 := as.NewBin("optstringbin", "string value")
log.Printf("Put: namespace=%s set=%s key=%s bin1=%s value1=%s bin2=%s value2=%s",
key.Namespace(), key.SetName(), key.Value(), bin1.Name, bin1.Value, bin2.Name, bin2.Value)
client.PutBins(shared.WritePolicy, key, bin1, bin2)
// Add integer, write new string and read record.
bin3 := as.NewBin(bin1.Name, 4)
bin4 := as.NewBin(bin2.Name, "new string")
log.Println("Add: ", bin3.Value)
log.Println("Write: ", bin4.Value)
log.Println("Read:")
record, err := client.Operate(shared.WritePolicy, key, as.AddOp(bin3), as.PutOp(bin4), as.GetOp())
shared.PanicOnError(err)
if record == nil {
log.Fatalf(
"Failed to get: namespace=%s set=%s key=%s",
key.Namespace(), key.SetName(), key.Value())
}
binExpected := as.NewBin(bin3.Name, 11)
shared.ValidateBin(key, binExpected, record)
shared.ValidateBin(key, bin4, record)
}
开发者ID:Kavec,项目名称:aerospike-client-go,代码行数:29,代码来源:operate.go
示例3: CloseAuction
// When the auction has completed, perform the following logic.
func CloseAuction(offerId int, bid *m.Bid) {
auctionMap.Remove(offerId)
// Check if the broker has enough inventory
offerKeyId := fmt.Sprintf("%s:%d", OFFERS, offerId)
offerKey, _ := as.NewKey(NAMESPACE, OFFERS, offerKeyId)
offerRec, _ := db.Get(readPolicy, offerKey)
sellerId := offerRec.Bins["broker_id"].(int)
// add to buyer's inventory and reduce credit
buyerKeyId := fmt.Sprintf("%s:%d", BROKERS, bid.BrokerId)
buyerKey, _ := as.NewKey(NAMESPACE, BROKERS, buyerKeyId)
db.Operate(writePolicy, buyerKey,
as.AddOp(as.NewBin(offerRec.Bins["ticker"].(string), offerRec.Bins["quantity"].(int))),
as.AddOp(as.NewBin("credit", -1*offerRec.Bins["quantity"].(int)*int(bid.Price))),
)
// reduce seller's inventory and add to credit
sellerKeyId := fmt.Sprintf("%s:%d", BROKERS, sellerId)
sellerKey, _ := as.NewKey(NAMESPACE, BROKERS, sellerKeyId)
db.Operate(writePolicy, sellerKey,
as.AddOp(as.NewBin(offerRec.Bins["ticker"].(string), -1*offerRec.Bins["quantity"].(int))),
as.AddOp(as.NewBin("credit", offerRec.Bins["quantity"].(int)*int(bid.Price))),
)
// mark the bid as winner
bidKeyId := fmt.Sprintf("%s:%d", BIDS, bid.Id)
bidKey, _ := as.NewKey(NAMESPACE, BIDS, bidKeyId)
db.Put(writePolicy, bidKey, as.BinMap{"winner": 1})
db.Put(writePolicy, offerKey, as.BinMap{"finished": 1, "winner": bid.Id})
}
开发者ID:investislife,项目名称:stock-exchange,代码行数:32,代码来源:auction.go
示例4: runExample
func runExample(client *as.Client) {
key, err := as.NewKey(*shared.Namespace, *shared.Set, "addkey")
shared.PanicOnError(err)
binName := "addbin"
// Delete record if it already exists.
client.Delete(shared.WritePolicy, key)
// Perform some adds and check results.
bin := as.NewBin(binName, 10)
log.Println("Initial add will create record. Initial value is ", bin.Value, ".")
client.AddBins(shared.WritePolicy, key, bin)
bin = as.NewBin(binName, 5)
log.Println("Add ", bin.Value, " to existing record.")
client.AddBins(shared.WritePolicy, key, bin)
record, err := client.Get(shared.Policy, key, bin.Name)
shared.PanicOnError(err)
if record == nil {
log.Fatalf(
"Failed to get: namespace=%s set=%s key=%s",
key.Namespace(), key.SetName(), key.Value())
}
// The value received from the server is an unsigned byte stream.
// Convert to an integer before comparing with expected.
received := record.Bins[bin.Name]
expected := 15
if received == expected {
log.Printf("Add successful: ns=%s set=%s key=%s bin=%s value=%s",
key.Namespace(), key.SetName(), key.Value(), bin.Name, received)
} else {
log.Fatalf("Add mismatch: Expected %d. Received %d.", expected, received)
}
// Demonstrate add and get combined.
bin = as.NewBin(binName, 30)
log.Println("Add ", bin.Value, " to existing record.")
record, err = client.Operate(shared.WritePolicy, key, as.AddOp(bin), as.GetOp())
shared.PanicOnError(err)
expected = 45
received = record.Bins[bin.Name]
if received == expected {
log.Printf("Add successful: ns=%s set=%s key=%s bin=%s value=%s",
key.Namespace(), key.SetName(), key.Value(), bin.Name, received)
} else {
log.Fatalf("Add mismatch: Expected %d. Received %d.", expected, received)
}
}
开发者ID:shatil,项目名称:aerospike-client-go,代码行数:55,代码来源:add.go
示例5: writeData
func (c *client) writeData(key *as.Key, result interface{}, expire time.Duration) {
writePolicy := as.NewWritePolicy(0, int32(expire.Seconds()))
value, err := json.Marshal(result)
panicOnError(err)
lockBin := as.NewBin(binLockName, nil)
dataBin := as.NewBin(binDataName, string(value))
err = c.asClient.PutBins(writePolicy, key, lockBin, dataBin)
panicOnError(err)
}
开发者ID:vad4msiu,项目名称:cache,代码行数:12,代码来源:client.go
示例6: nextSeq
// Increment a bin, being used as a sequence generator.
func nextSeq(seq string) (int, error) {
keyId := fmt.Sprintf("%s:%s", SEQUENCES, seq)
key, err := as.NewKey(NAMESPACE, SEQUENCES, keyId)
if err != nil {
return 0, err
}
rec, err := db.Operate(
writePolicy,
key,
as.AddOp(as.NewBin("seq", 1)),
as.GetOpForBin("seq"),
)
if err != nil {
return 0, err
}
if seq, exists := rec.Bins["seq"]; !exists || int(seq.(int)) <= 0 {
return 0, fmt.Errorf("sequence not found: %s", seq)
}
return rec.Bins["seq"].(int), nil
}
开发者ID:investislife,项目名称:stock-exchange,代码行数:26,代码来源:db.go
示例7: runExample
func runExample(client *as.Client) {
// Set LuaPath
luaPath, _ := os.Getwd()
luaPath += "/udf/"
as.SetLuaPath(luaPath)
filename := "sum_single_bin"
regTask, err := client.RegisterUDFFromFile(nil, luaPath+filename+".lua", filename+".lua", as.LUA)
shared.PanicOnError(err)
// wait until UDF is created
shared.PanicOnError(<-regTask.OnComplete())
sum := 0
for i := 1; i <= keyCount; i++ {
sum += i
key, err := as.NewKey(*shared.Namespace, *shared.Set, i)
shared.PanicOnError(err)
bin1 := as.NewBin("bin1", i)
client.PutBins(nil, key, bin1)
}
t := time.Now()
stm := as.NewStatement(*shared.Namespace, *shared.Set)
res, err := client.QueryAggregate(nil, stm, filename, filename, "bin1")
shared.PanicOnError(err)
for rec := range res.Results() {
log.Printf("Result %f should equal %d\n", rec.Record.Bins["SUCCESS"], sum)
}
log.Println("Map/Reduce took", time.Now().Sub(t))
}
开发者ID:mantyr,项目名称:aerospike-client-go,代码行数:33,代码来源:single_bin_sum.go
示例8: lockKey
func (c *client) lockKey(key *as.Key) error {
writePolicy := as.NewWritePolicy(0, -1)
writePolicy.RecordExistsAction = as.CREATE_ONLY
lockBin := as.NewBin(binLockName, "true")
return c.asClient.PutBins(writePolicy, key, lockBin)
}
开发者ID:vad4msiu,项目名称:cache,代码行数:8,代码来源:client.go
示例9: Set
// Set stores a value by key.
// TODO(nslaughter): change name. Put is a better name because a Set is a thing.
func (db DB) Set(key string, value string) (interface{}, error) {
k, err := as.NewKey(db.namespace, db.set, key)
if err != nil {
return 0, err
}
bin := as.NewBin("", value)
db.client.PutBins(db.wp, k, bin)
return 1, nil
}
开发者ID:nslaughter,项目名称:goks,代码行数:11,代码来源:aerospikekv.go
示例10: testListMapCombined
/**
* Write/Read Array/Map combination directly instead of relying on java serializer.
*/
func testListMapCombined(client *as.Client) {
log.Printf("Read/Write Array/Map")
key, _ := as.NewKey(*shared.Namespace, *shared.Set, "listmapkey")
client.Delete(shared.WritePolicy, key)
blob := []byte{3, 52, 125}
inner := []interface{}{
"string2",
5,
}
innerMap := map[interface{}]interface{}{
"a": 1,
2: "b",
3: blob,
"list": inner,
}
list := []interface{}{
"string1",
8,
inner,
innerMap,
}
bin := as.NewBin("listmapbin", list)
client.PutBins(shared.WritePolicy, key, bin)
record, err := client.Get(shared.Policy, key, bin.Name)
shared.PanicOnError(err)
received := record.Bins[bin.Name].([]interface{})
validateSize(4, len(received))
validate("string1", received[0])
// Server convert numbers to long, so must expect long.
validate(8, received[1])
receivedInner := received[2].([]interface{})
validateSize(2, len(receivedInner))
validate("string2", receivedInner[0])
validate(5, receivedInner[1])
receivedMap := received[3].(map[interface{}]interface{})
validateSize(4, len(receivedMap))
validate(1, receivedMap["a"])
validate("b", receivedMap[2])
validateBytes(blob, receivedMap[3].([]byte))
receivedInner2 := receivedMap["list"].([]interface{})
validateSize(2, len(receivedInner2))
validate("string2", receivedInner2[0])
validate(5, receivedInner2[1])
log.Printf("Read/Write Array/Map successful")
}
开发者ID:shatil,项目名称:aerospike-client-go,代码行数:58,代码来源:list_map.go
示例11: runReplaceExample
func runReplaceExample(client *as.Client) {
key, err := as.NewKey(*shared.Namespace, *shared.Set, "replacekey")
shared.PanicOnError(err)
bin1 := as.NewBin("bin1", "value1")
bin2 := as.NewBin("bin2", "value2")
bin3 := as.NewBin("bin3", "value3")
log.Printf("Put: namespace=%s set=%s key=%s bin1=%s value1=%s bin2=%s value2=%s",
key.Namespace(), key.SetName(), key.Value(), bin1.Name, bin1.Value, bin2.Name, bin2.Value)
client.PutBins(shared.WritePolicy, key, bin1, bin2)
log.Printf("Replace with: namespace=%s set=%s key=%s bin=%s value=%s",
key.Namespace(), key.SetName(), key.Value(), bin3.Name, bin3.Value)
wpolicy := as.NewWritePolicy(0, 0)
wpolicy.RecordExistsAction = as.REPLACE
client.PutBins(wpolicy, key, bin3)
log.Printf("Get: namespace=%s set=%s key=%s", key.Namespace(), key.SetName(), key.Value())
record, err := client.Get(shared.Policy, key)
shared.PanicOnError(err)
if record == nil {
log.Fatalf(
"Failed to get: namespace=%s set=%s key=%s", key.Namespace(), key.SetName(), key.Value())
}
if record.Bins[bin1.Name] == nil {
log.Printf(bin1.Name + " was deleted as expected.")
} else {
log.Fatalln(bin1.Name + " found when it should have been deleted.")
}
if record.Bins[bin2.Name] == nil {
log.Printf(bin2.Name + " was deleted as expected.")
} else {
log.Fatalln(bin2.Name + " found when it should have been deleted.")
}
shared.ValidateBin(key, bin3, record)
}
开发者ID:atomx,项目名称:aerospike-client-go,代码行数:42,代码来源:replace.go
示例12: runExample
func runExample(client *as.Client) {
key, err := as.NewKey(*shared.Namespace, *shared.Set, "prependkey")
shared.PanicOnError(err)
binName := "prependbin"
// Delete record if it already exists.
client.Delete(shared.WritePolicy, key)
bin := as.NewBin(binName, "World")
log.Println("Initial prepend will create record. Initial value is ", bin.Value, ".")
client.PrependBins(shared.WritePolicy, key, bin)
bin = as.NewBin(binName, "Hello ")
log.Println("Prepend \"", bin.Value, "\" to existing record.")
client.PrependBins(shared.WritePolicy, key, bin)
record, err := client.Get(shared.Policy, key, bin.Name)
shared.PanicOnError(err)
if record == nil {
log.Fatalf(
"Failed to get: namespace=%s set=%s key=%s",
key.Namespace(), key.SetName(), key.Value())
}
// The value received from the server is an unsigned byte stream.
// Convert to an integer before comparing with expected.
received := record.Bins[bin.Name]
expected := "Hello World"
if received == expected {
log.Printf("Prepend successful: ns=%s set=%s key=%s bin=%s value=%s",
key.Namespace(), key.SetName(), key.Value(), bin.Name, received)
} else {
log.Fatalf("Prepend mismatch: Expected %s. Received %s.", expected, received)
}
}
开发者ID:Kavec,项目名称:aerospike-client-go,代码行数:38,代码来源:prepend.go
示例13: runMultiBinExample
// Execute put and get on a server configured as multi-bin. This is the server default.
func runMultiBinExample(client *as.Client) {
key, _ := as.NewKey(*shared.Namespace, *shared.Set, "putgetkey")
bin1 := as.NewBin("bin1", "value1")
bin2 := as.NewBin("bin2", "value2")
log.Printf("Put: namespace=%s set=%s key=%s bin1=%s value1=%s bin2=%s value2=%s",
key.Namespace(), key.SetName(), key.Value(), bin1.Name, bin1.Value, bin2.Name, bin2.Value)
client.PutBins(shared.WritePolicy, key, bin1, bin2)
log.Printf("Get: namespace=%s set=%s key=%s", key.Namespace(), key.SetName(), key.Value())
record, err := client.Get(shared.Policy, key)
shared.PanicOnError(err)
if record == nil {
panic(errors.New(fmt.Sprintf(
"Failed to get: namespace=%s set=%s key=%s", key.Namespace(), key.SetName(), key.Value())))
}
shared.ValidateBin(key, bin1, record)
shared.ValidateBin(key, bin2, record)
}
开发者ID:shatil,项目名称:aerospike-client-go,代码行数:24,代码来源:putget.go
示例14: runExample
func runExample(client *as.Client) {
key, _ := as.NewKey(*shared.Namespace, *shared.Set, "touchkey")
bin := as.NewBin("touchbin", "touchvalue")
log.Printf("Create record with 2 second expiration.")
writePolicy := as.NewWritePolicy(0, 2)
client.PutBins(writePolicy, key, bin)
log.Printf("Touch same record with 5 second expiration.")
writePolicy.Expiration = 5
record, err := client.Operate(writePolicy, key, as.TouchOp(), as.GetHeaderOp())
if record == nil {
log.Fatalf(
"Failed to get: namespace=%s set=%s key=%s bin=%s value=%s",
key.Namespace(), key.SetName(), key.Value(), bin.Name, nil)
}
if record.Expiration == 0 {
log.Fatalf(
"Failed to get record expiration: namespace=%s set=%s key=%s",
key.Namespace(), key.SetName(), key.Value())
}
log.Printf("Sleep 3 seconds.")
time.Sleep(3 * time.Second)
record, err = client.Get(shared.Policy, key, bin.Name)
shared.PanicOnError(err)
if record == nil {
log.Fatalf(
"Failed to get: namespace=%s set=%s key=%s",
key.Namespace(), key.SetName(), key.Value())
}
log.Printf("Success. Record still exists.")
log.Printf("Sleep 4 seconds.")
time.Sleep(4 * time.Second)
record, err = client.Get(shared.Policy, key, bin.Name)
shared.PanicOnError(err)
if record == nil {
log.Printf("Success. Record expired as expected.")
} else {
log.Fatalf("Found record when it should have expired.")
}
}
开发者ID:mantyr,项目名称:aerospike-client-go,代码行数:49,代码来源:touch.go
示例15: writeIfGenerationNotChanged
func writeIfGenerationNotChanged(client *as.Client) {
key, _ := as.NewKey(*shared.Namespace, *shared.Set, "udfkey2")
bin := as.NewBin("udfbin2", "string value")
// Seed record.
client.PutBins(shared.WritePolicy, key, bin)
// Get record generation.
gen, err := client.Execute(shared.WritePolicy, key, "record_example", "getGeneration")
shared.PanicOnError(err)
// Write record if generation has not changed.
client.Execute(shared.WritePolicy, key, "record_example", "writeIfGenerationNotChanged", as.NewValue(bin.Name), bin.Value, as.NewValue(gen))
log.Printf("Record written.")
}
开发者ID:Kavec,项目名称:aerospike-client-go,代码行数:15,代码来源:udf.go
示例16: noExpireExample
/**
* Write and twice read a non-expiring tuple using the new "NoExpire" value (-1).
* This example is most effective when the Default Namespace Time To Live (TTL)
* is set to a small value, such as 5 seconds. When we sleep beyond that
* time, we show that the NoExpire TTL flag actually works.
*/
func noExpireExample(client *as.Client) {
key, _ := as.NewKey(*shared.Namespace, *shared.Set, "expirekey")
bin := as.NewBin("expirebin", "noexpirevalue")
log.Printf("Put: namespace=%s set=%s key=%s bin=%s value=%s expiration=NoExpire",
key.Namespace(), key.SetName(), key.Value(), bin.Name, bin.Value)
// Specify that record NEVER expires.
// The "Never Expire" value is -1, or 0xFFFFFFFF.
writePolicy := as.NewWritePolicy(0, 2)
writePolicy.Expiration = math.MaxUint32
client.PutBins(writePolicy, key, bin)
// Read the record, showing it is there.
log.Printf("Get: namespace=%s set=%s key=%s",
key.Namespace(), key.SetName(), key.Value())
record, err := client.Get(shared.Policy, key, bin.Name)
shared.PanicOnError(err)
if record == nil {
log.Fatalf(
"Failed to get record: namespace=%s set=%s key=%s",
key.Namespace(), key.SetName(), key.Value())
}
received := record.Bins[bin.Name]
expected := bin.Value.String()
if received == expected {
log.Printf("Get record successful: namespace=%s set=%s key=%s bin=%s value=%s",
key.Namespace(), key.SetName(), key.Value(), bin.Name, received)
} else {
log.Fatalf("Expire record mismatch: Expected %s. Received %s.",
expected, received)
}
// Read this Record after the Default Expiration, showing it is still there.
// We should have set the Namespace TTL at 5 sec.
log.Printf("Sleeping for 10 seconds ...")
time.Sleep(10 * time.Second)
record, err = client.Get(shared.Policy, key, bin.Name)
shared.PanicOnError(err)
if record == nil {
log.Fatalf("Record expired and should NOT have.")
} else {
log.Printf("Found Record (correctly) after default TTL.")
}
}
开发者ID:mantyr,项目名称:aerospike-client-go,代码行数:54,代码来源:expire.go
示例17: writeRecords
/**
* Write records individually.
*/
func writeRecords(
client *as.Client,
keyPrefix string,
binName string,
valuePrefix string,
size int,
) {
for i := 1; i <= size; i++ {
key, _ := as.NewKey(*shared.Namespace, *shared.Set, keyPrefix+strconv.Itoa(i))
bin := as.NewBin(binName, valuePrefix+strconv.Itoa(i))
log.Printf("Put: ns=%s set=%s key=%s bin=%s value=%s",
key.Namespace(), key.SetName(), key.Value(), bin.Name, bin.Value)
client.PutBins(shared.WritePolicy, key, bin)
}
}
开发者ID:Kavec,项目名称:aerospike-client-go,代码行数:20,代码来源:batch.go
示例18: writeUsingUdf
func writeUsingUdf(client *as.Client) {
key, _ := as.NewKey(*shared.Namespace, *shared.Set, "udfkey1")
bin := as.NewBin("udfbin1", "string value")
client.Execute(shared.WritePolicy, key, "record_example", "writeBin", as.NewValue(bin.Name), bin.Value)
record, err := client.Get(shared.Policy, key, bin.Name)
shared.PanicOnError(err)
expected := bin.Value.String()
received := record.Bins[bin.Name].(string)
if received == expected {
log.Printf("Data matched: namespace=%s set=%s key=%s bin=%s value=%s",
key.Namespace(), key.SetName(), key.Value(), bin.Name, received)
} else {
log.Printf("Data mismatch: Expected %s. Received %s.", expected, received)
}
}
开发者ID:Kavec,项目名称:aerospike-client-go,代码行数:18,代码来源:udf.go
示例19: expireExample
/**
* Write and twice read an expiration record.
*/
func expireExample(client *as.Client) {
key, _ := as.NewKey(*shared.Namespace, *shared.Set, "expirekey ")
bin := as.NewBin("expirebin", "expirevalue")
log.Printf("Put: namespace=%s set=%s key=%s bin=%s value=%s expiration=2",
key.Namespace(), key.SetName(), key.Value(), bin.Name, bin.Value)
// Specify that record expires 2 seconds after it's written.
writePolicy := as.NewWritePolicy(0, 2)
client.PutBins(writePolicy, key, bin)
// Read the record before it expires, showing it is there.
log.Printf("Get: namespace=%s set=%s key=%s",
key.Namespace(), key.SetName(), key.Value())
record, err := client.Get(shared.Policy, key, bin.Name)
shared.PanicOnError(err)
if record == nil {
log.Fatalf(
"Failed to get record: namespace=%s set=%s key=%s",
key.Namespace(), key.SetName(), key.Value())
}
received := record.Bins[bin.Name]
expected := bin.Value.String()
if received == expected {
log.Printf("Get record successful: namespace=%s set=%s key=%s bin=%s value=%s",
key.Namespace(), key.SetName(), key.Value(), bin.Name, received)
} else {
log.Fatalf("Expire record mismatch: Expected %s. Received %s.",
expected, received)
}
// Read the record after it expires, showing it's gone.
log.Printf("Sleeping for 3 seconds ...")
time.Sleep(3 * time.Second)
record, err = client.Get(shared.Policy, key, bin.Name)
shared.PanicOnError(err)
if record == nil {
log.Printf("Expiry of record successful. Record not found.")
} else {
log.Fatalf("Found record when it should have expired.")
}
}
开发者ID:mantyr,项目名称:aerospike-client-go,代码行数:47,代码来源:expire.go
示例20: testMapComplex
/**
* Write/Read map[interface{}]interface{} directly instead of relying on java serializer.
*/
func testMapComplex(client *as.Client) {
log.Printf("Read/Write map[interface{}]interface{}")
key, _ := as.NewKey(*shared.Namespace, *shared.Set, "mapkey2")
client.Delete(shared.WritePolicy, key)
blob := []byte{3, 52, 125}
list := []int{
100034,
12384955,
3,
512,
}
amap := map[interface{}]interface{}{
"key1": "string1",
"key2": 2,
"key3": blob,
"key4": list,
}
bin := as.NewBin("mapbin2", amap)
client.PutBins(shared.WritePolicy, key, bin)
record, err := client.Get(shared.Policy, key, bin.Name)
shared.PanicOnError(err)
receivedMap := record.Bins[bin.Name].(map[interface{}]interface{})
validateSize(4, len(receivedMap))
validate("string1", receivedMap["key1"])
// Server convert numbers to long, so must expect long.
validate(2, receivedMap["key2"])
validateBytes(blob, receivedMap["key3"].([]byte))
receivedInner := receivedMap["key4"].([]interface{})
validateSize(4, len(receivedInner))
validate(100034, receivedInner[0])
validate(12384955, receivedInner[1])
validate(3, receivedInner[2])
validate(512, receivedInner[3])
log.Printf("Read/Write map[interface{}]interface{} successful")
}
开发者ID:shatil,项目名称:aerospike-client-go,代码行数:45,代码来源:list_map.go
注:本文中的github.com/aerospike/aerospike-client-go.NewBin函数示例整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论