• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    迪恩网络公众号

Golang shared.PanicOnError函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了Golang中github.com/aerospike/aerospike-client-go/examples/shared.PanicOnError函数的典型用法代码示例。如果您正苦于以下问题:Golang PanicOnError函数的具体用法?Golang PanicOnError怎么用?Golang PanicOnError使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了PanicOnError函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的Golang代码示例。

示例1: runExample

func runExample(client *as.Client) {
	// Set LuaPath
	luaPath, _ := os.Getwd()
	luaPath += "/udf/"
	as.SetLuaPath(luaPath)

	filename := "sum_single_bin"
	regTask, err := client.RegisterUDFFromFile(nil, luaPath+filename+".lua", filename+".lua", as.LUA)
	shared.PanicOnError(err)

	// wait until UDF is created
	shared.PanicOnError(<-regTask.OnComplete())

	sum := 0
	for i := 1; i <= keyCount; i++ {
		sum += i
		key, err := as.NewKey(*shared.Namespace, *shared.Set, i)
		shared.PanicOnError(err)

		bin1 := as.NewBin("bin1", i)
		client.PutBins(nil, key, bin1)
	}

	t := time.Now()
	stm := as.NewStatement(*shared.Namespace, *shared.Set)
	res, err := client.QueryAggregate(nil, stm, filename, filename, "bin1")
	shared.PanicOnError(err)

	for rec := range res.Results() {
		log.Printf("Result %f should equal %d\n", rec.Record.Bins["SUCCESS"], sum)
	}
	log.Println("Map/Reduce took", time.Now().Sub(t))
}
开发者ID:mantyr,项目名称:aerospike-client-go,代码行数:33,代码来源:single_bin_sum.go


示例2: runExample

func runExample(client *as.Client) {
	log.Printf("Scan parallel: namespace=" + *shared.Namespace + " set=" + *shared.Set)
	recordCount := 0
	begin := time.Now()
	policy := as.NewScanPolicy()
	recordset, err := client.ScanAll(policy, *shared.Namespace, *shared.Set)
	shared.PanicOnError(err)

L:
	for {
		select {
		case rec := <-recordset.Records:
			if rec == nil {
				break L
			}
			recordCount++

			if (recordCount % 10000) == 0 {
				log.Println("Records ", recordCount)
			}
		case err := <-recordset.Errors:
			// if there was an error, stop
			shared.PanicOnError(err)
		}
	}

	end := time.Now()
	seconds := float64(end.Sub(begin)) / float64(time.Second)
	log.Println("Total records returned: ", recordCount)
	log.Println("Elapsed time: ", seconds, " seconds")
	performance := shared.Round(float64(recordCount)/float64(seconds), 0.5, 0)
	log.Println("Records/second: ", performance)
}
开发者ID:Kavec,项目名称:aerospike-client-go,代码行数:33,代码来源:scan_parallel.go


示例3: runExample

func runExample(client *as.Client) {
	log.Println("Scan series: namespace=", *shared.Namespace, " set=", *shared.Set)

	// Use low scan priority.  This will take more time, but it will reduce
	// the load on the server.
	policy := as.NewScanPolicy()
	policy.MaxRetries = 1
	policy.Priority = as.LOW

	nodeList := client.GetNodes()
	begin := time.Now()

	for _, node := range nodeList {
		log.Println("Scan node ", node.GetName())
		recordset, err := client.ScanNode(policy, node, *shared.Namespace, *shared.Set)
		shared.PanicOnError(err)

	L:
		for {
			select {
			case rec := <-recordset.Records:
				if rec == nil {
					break L
				}
				metrics, exists := setMap[rec.Key.SetName()]

				if !exists {
					metrics = Metrics{}
				}
				metrics.count++
				metrics.total++
				setMap[rec.Key.SetName()] = metrics

			case err := <-recordset.Errors:
				// if there was an error, stop
				shared.PanicOnError(err)
			}
		}

		for k, v := range setMap {
			log.Println("Node ", node, " set ", k, " count: ", v.count)
			v.count = 0
		}
	}

	end := time.Now()
	seconds := float64(end.Sub(begin)) / float64(time.Second)
	log.Println("Elapsed time: ", seconds, " seconds")

	total := 0

	for k, v := range setMap {
		log.Println("Total set ", k, " count: ", v.total)
		total += v.total
	}
	log.Println("Grand total: ", total)
	performance := shared.Round(float64(total)/seconds, 0.5, 0)
	log.Println("Records/second: ", performance)
}
开发者ID:Kavec,项目名称:aerospike-client-go,代码行数:59,代码来源:scan_serial.go


示例4: runExample

func runExample(client *as.Client) {
	key, err := as.NewKey(*shared.Namespace, *shared.Set, "addkey")
	shared.PanicOnError(err)

	binName := "addbin"

	// Delete record if it already exists.
	client.Delete(shared.WritePolicy, key)

	// Perform some adds and check results.
	bin := as.NewBin(binName, 10)
	log.Println("Initial add will create record.  Initial value is ", bin.Value, ".")
	client.AddBins(shared.WritePolicy, key, bin)

	bin = as.NewBin(binName, 5)
	log.Println("Add ", bin.Value, " to existing record.")
	client.AddBins(shared.WritePolicy, key, bin)

	record, err := client.Get(shared.Policy, key, bin.Name)
	shared.PanicOnError(err)

	if record == nil {
		log.Fatalf(
			"Failed to get: namespace=%s set=%s key=%s",
			key.Namespace(), key.SetName(), key.Value())
	}

	// The value received from the server is an unsigned byte stream.
	// Convert to an integer before comparing with expected.
	received := record.Bins[bin.Name]
	expected := 15

	if received == expected {
		log.Printf("Add successful: ns=%s set=%s key=%s bin=%s value=%s",
			key.Namespace(), key.SetName(), key.Value(), bin.Name, received)
	} else {
		log.Fatalf("Add mismatch: Expected %d. Received %d.", expected, received)
	}

	// Demonstrate add and get combined.
	bin = as.NewBin(binName, 30)
	log.Println("Add ", bin.Value, " to existing record.")
	record, err = client.Operate(shared.WritePolicy, key, as.AddOp(bin), as.GetOp())
	shared.PanicOnError(err)

	expected = 45
	received = record.Bins[bin.Name]

	if received == expected {
		log.Printf("Add successful: ns=%s set=%s key=%s bin=%s value=%s",
			key.Namespace(), key.SetName(), key.Value(), bin.Name, received)
	} else {
		log.Fatalf("Add mismatch: Expected %d. Received %d.", expected, received)
	}
}
开发者ID:shatil,项目名称:aerospike-client-go,代码行数:55,代码来源:add.go


示例5: runExample

func runExample(client *as.Client) {
	key, _ := as.NewKey(*shared.Namespace, *shared.Set, "touchkey")
	bin := as.NewBin("touchbin", "touchvalue")

	log.Printf("Create record with 2 second expiration.")
	writePolicy := as.NewWritePolicy(0, 2)
	client.PutBins(writePolicy, key, bin)

	log.Printf("Touch same record with 5 second expiration.")
	writePolicy.Expiration = 5
	record, err := client.Operate(writePolicy, key, as.TouchOp(), as.GetHeaderOp())

	if record == nil {
		log.Fatalf(
			"Failed to get: namespace=%s set=%s key=%s bin=%s value=%s",
			key.Namespace(), key.SetName(), key.Value(), bin.Name, nil)
	}

	if record.Expiration == 0 {
		log.Fatalf(
			"Failed to get record expiration: namespace=%s set=%s key=%s",
			key.Namespace(), key.SetName(), key.Value())
	}

	log.Printf("Sleep 3 seconds.")
	time.Sleep(3 * time.Second)

	record, err = client.Get(shared.Policy, key, bin.Name)
	shared.PanicOnError(err)

	if record == nil {
		log.Fatalf(
			"Failed to get: namespace=%s set=%s key=%s",
			key.Namespace(), key.SetName(), key.Value())
	}

	log.Printf("Success. Record still exists.")
	log.Printf("Sleep 4 seconds.")
	time.Sleep(4 * time.Second)

	record, err = client.Get(shared.Policy, key, bin.Name)
	shared.PanicOnError(err)

	if record == nil {
		log.Printf("Success. Record expired as expected.")
	} else {
		log.Fatalf("Found record when it should have expired.")
	}
}
开发者ID:mantyr,项目名称:aerospike-client-go,代码行数:49,代码来源:touch.go


示例6: noExpireExample

/**
 * Write and twice read a non-expiring tuple using the new "NoExpire" value (-1).
 * This example is most effective when the Default Namespace Time To Live (TTL)
 * is set to a small value, such as 5 seconds.  When we sleep beyond that
 * time, we show that the NoExpire TTL flag actually works.
 */
func noExpireExample(client *as.Client) {
	key, _ := as.NewKey(*shared.Namespace, *shared.Set, "expirekey")
	bin := as.NewBin("expirebin", "noexpirevalue")

	log.Printf("Put: namespace=%s set=%s key=%s bin=%s value=%s expiration=NoExpire",
		key.Namespace(), key.SetName(), key.Value(), bin.Name, bin.Value)

	// Specify that record NEVER expires.
	// The "Never Expire" value is -1, or 0xFFFFFFFF.
	writePolicy := as.NewWritePolicy(0, 2)
	writePolicy.Expiration = math.MaxUint32
	client.PutBins(writePolicy, key, bin)

	// Read the record, showing it is there.
	log.Printf("Get: namespace=%s set=%s key=%s",
		key.Namespace(), key.SetName(), key.Value())

	record, err := client.Get(shared.Policy, key, bin.Name)
	shared.PanicOnError(err)
	if record == nil {
		log.Fatalf(
			"Failed to get record: namespace=%s set=%s key=%s",
			key.Namespace(), key.SetName(), key.Value())
	}

	received := record.Bins[bin.Name]
	expected := bin.Value.String()
	if received == expected {
		log.Printf("Get record successful: namespace=%s set=%s key=%s bin=%s value=%s",
			key.Namespace(), key.SetName(), key.Value(), bin.Name, received)
	} else {
		log.Fatalf("Expire record mismatch: Expected %s. Received %s.",
			expected, received)
	}

	// Read this Record after the Default Expiration, showing it is still there.
	// We should have set the Namespace TTL at 5 sec.
	log.Printf("Sleeping for 10 seconds ...")
	time.Sleep(10 * time.Second)
	record, err = client.Get(shared.Policy, key, bin.Name)
	shared.PanicOnError(err)

	if record == nil {
		log.Fatalf("Record expired and should NOT have.")
	} else {
		log.Printf("Found Record (correctly) after default TTL.")
	}
}
开发者ID:mantyr,项目名称:aerospike-client-go,代码行数:54,代码来源:expire.go


示例7: batchReads

/**
 * Read records in one batch.
 */
func batchReads(
	client *as.Client,
	keyPrefix string,
	binName string,
	size int,
) {
	// Batch gets into one call.
	keys := make([]*as.Key, size)
	for i := 0; i < size; i++ {
		keys[i], _ = as.NewKey(*shared.Namespace, *shared.Set, keyPrefix+strconv.Itoa(i+1))
	}

	records, err := client.BatchGet(nil, keys, binName)
	shared.PanicOnError(err)

	for i := 0; i < len(records); i++ {
		key := keys[i]
		record := records[i]
		level := asl.ERR
		var value interface{}

		if record != nil {
			level = asl.INFO
			value = record.Bins[binName]
		}
		asl.Logger.LogAtLevel(level, "Record: ns=%s set=%s key=%s bin=%s value=%s",
			key.Namespace(), key.SetName(), key.Value(), binName, value)
	}

	if len(records) != size {
		log.Fatalf("Record size mismatch. Expected %d. Received %d.", size, len(records))
	}
}
开发者ID:Kavec,项目名称:aerospike-client-go,代码行数:36,代码来源:batch.go


示例8: batchReadHeaders

/**
 * Read record header data in one batch.
 */
func batchReadHeaders(
	client *as.Client,
	keyPrefix string,
	size int,
) {
	// Batch gets into one call.
	keys := make([]*as.Key, size)
	for i := 0; i < size; i++ {
		keys[i], _ = as.NewKey(*shared.Namespace, *shared.Set, keyPrefix+strconv.Itoa(i+1))
	}

	records, err := client.BatchGetHeader(nil, keys)
	shared.PanicOnError(err)

	for i := 0; i < len(records); i++ {
		key := keys[i]
		record := records[i]
		level := asl.ERR
		generation := 0
		expiration := 0

		if record != nil && (record.Generation > 0 || record.Expiration > 0) {
			level = asl.INFO
			generation = record.Generation
			expiration = record.Expiration
		}
		asl.Logger.LogAtLevel(level, "Record: ns=%s set=%s key=%s generation=%d expiration=%d",
			key.Namespace(), key.SetName(), key.Value(), generation, expiration)
	}

	if len(records) != size {
		log.Fatalf("Record size mismatch. Expected %d. Received %d.", size, len(records))
	}
}
开发者ID:Kavec,项目名称:aerospike-client-go,代码行数:37,代码来源:batch.go


示例9: runExample

func runExample(client *as.Client) {
	// Write initial record.
	key, _ := as.NewKey(*shared.Namespace, *shared.Set, "opkey")
	bin1 := as.NewBin("optintbin", 7)
	bin2 := as.NewBin("optstringbin", "string value")
	log.Printf("Put: namespace=%s set=%s key=%s bin1=%s value1=%s bin2=%s value2=%s",
		key.Namespace(), key.SetName(), key.Value(), bin1.Name, bin1.Value, bin2.Name, bin2.Value)
	client.PutBins(shared.WritePolicy, key, bin1, bin2)

	// Add integer, write new string and read record.
	bin3 := as.NewBin(bin1.Name, 4)
	bin4 := as.NewBin(bin2.Name, "new string")
	log.Println("Add: ", bin3.Value)
	log.Println("Write: ", bin4.Value)
	log.Println("Read:")

	record, err := client.Operate(shared.WritePolicy, key, as.AddOp(bin3), as.PutOp(bin4), as.GetOp())
	shared.PanicOnError(err)

	if record == nil {
		log.Fatalf(
			"Failed to get: namespace=%s set=%s key=%s",
			key.Namespace(), key.SetName(), key.Value())
	}

	binExpected := as.NewBin(bin3.Name, 11)
	shared.ValidateBin(key, binExpected, record)
	shared.ValidateBin(key, bin4, record)
}
开发者ID:Kavec,项目名称:aerospike-client-go,代码行数:29,代码来源:operate.go


示例10: expireExample

/**
 * Write and twice read an expiration record.
 */
func expireExample(client *as.Client) {
	key, _ := as.NewKey(*shared.Namespace, *shared.Set, "expirekey ")
	bin := as.NewBin("expirebin", "expirevalue")

	log.Printf("Put: namespace=%s set=%s key=%s bin=%s value=%s expiration=2",
		key.Namespace(), key.SetName(), key.Value(), bin.Name, bin.Value)

	// Specify that record expires 2 seconds after it's written.
	writePolicy := as.NewWritePolicy(0, 2)
	client.PutBins(writePolicy, key, bin)

	// Read the record before it expires, showing it is there.
	log.Printf("Get: namespace=%s set=%s key=%s",
		key.Namespace(), key.SetName(), key.Value())

	record, err := client.Get(shared.Policy, key, bin.Name)
	shared.PanicOnError(err)
	if record == nil {
		log.Fatalf(
			"Failed to get record: namespace=%s set=%s key=%s",
			key.Namespace(), key.SetName(), key.Value())
	}

	received := record.Bins[bin.Name]
	expected := bin.Value.String()
	if received == expected {
		log.Printf("Get record successful: namespace=%s set=%s key=%s bin=%s value=%s",
			key.Namespace(), key.SetName(), key.Value(), bin.Name, received)
	} else {
		log.Fatalf("Expire record mismatch: Expected %s. Received %s.",
			expected, received)
	}

	// Read the record after it expires, showing it's gone.
	log.Printf("Sleeping for 3 seconds ...")
	time.Sleep(3 * time.Second)
	record, err = client.Get(shared.Policy, key, bin.Name)
	shared.PanicOnError(err)
	if record == nil {
		log.Printf("Expiry of record successful. Record not found.")
	} else {
		log.Fatalf("Found record when it should have expired.")
	}
}
开发者ID:mantyr,项目名称:aerospike-client-go,代码行数:47,代码来源:expire.go


示例11: testListMapCombined

/**
 * Write/Read Array/Map combination directly instead of relying on java serializer.
 */
func testListMapCombined(client *as.Client) {
	log.Printf("Read/Write Array/Map")
	key, _ := as.NewKey(*shared.Namespace, *shared.Set, "listmapkey")
	client.Delete(shared.WritePolicy, key)

	blob := []byte{3, 52, 125}
	inner := []interface{}{
		"string2",
		5,
	}

	innerMap := map[interface{}]interface{}{
		"a":    1,
		2:      "b",
		3:      blob,
		"list": inner,
	}

	list := []interface{}{
		"string1",
		8,
		inner,
		innerMap,
	}

	bin := as.NewBin("listmapbin", list)
	client.PutBins(shared.WritePolicy, key, bin)

	record, err := client.Get(shared.Policy, key, bin.Name)
	shared.PanicOnError(err)
	received := record.Bins[bin.Name].([]interface{})

	validateSize(4, len(received))
	validate("string1", received[0])
	// Server convert numbers to long, so must expect long.
	validate(8, received[1])

	receivedInner := received[2].([]interface{})
	validateSize(2, len(receivedInner))
	validate("string2", receivedInner[0])
	validate(5, receivedInner[1])

	receivedMap := received[3].(map[interface{}]interface{})
	validateSize(4, len(receivedMap))
	validate(1, receivedMap["a"])
	validate("b", receivedMap[2])
	validateBytes(blob, receivedMap[3].([]byte))

	receivedInner2 := receivedMap["list"].([]interface{})
	validateSize(2, len(receivedInner2))
	validate("string2", receivedInner2[0])
	validate(5, receivedInner2[1])

	log.Printf("Read/Write Array/Map successful")
}
开发者ID:shatil,项目名称:aerospike-client-go,代码行数:58,代码来源:list_map.go


示例12: runReplaceExample

func runReplaceExample(client *as.Client) {
	key, err := as.NewKey(*shared.Namespace, *shared.Set, "replacekey")
	shared.PanicOnError(err)
	bin1 := as.NewBin("bin1", "value1")
	bin2 := as.NewBin("bin2", "value2")
	bin3 := as.NewBin("bin3", "value3")

	log.Printf("Put: namespace=%s set=%s key=%s bin1=%s value1=%s bin2=%s value2=%s",
		key.Namespace(), key.SetName(), key.Value(), bin1.Name, bin1.Value, bin2.Name, bin2.Value)

	client.PutBins(shared.WritePolicy, key, bin1, bin2)

	log.Printf("Replace with: namespace=%s set=%s key=%s bin=%s value=%s",
		key.Namespace(), key.SetName(), key.Value(), bin3.Name, bin3.Value)

	wpolicy := as.NewWritePolicy(0, 0)
	wpolicy.RecordExistsAction = as.REPLACE
	client.PutBins(wpolicy, key, bin3)

	log.Printf("Get: namespace=%s set=%s key=%s", key.Namespace(), key.SetName(), key.Value())

	record, err := client.Get(shared.Policy, key)
	shared.PanicOnError(err)

	if record == nil {
		log.Fatalf(
			"Failed to get: namespace=%s set=%s key=%s", key.Namespace(), key.SetName(), key.Value())
	}

	if record.Bins[bin1.Name] == nil {
		log.Printf(bin1.Name + " was deleted as expected.")
	} else {
		log.Fatalln(bin1.Name + " found when it should have been deleted.")
	}

	if record.Bins[bin2.Name] == nil {
		log.Printf(bin2.Name + " was deleted as expected.")
	} else {
		log.Fatalln(bin2.Name + " found when it should have been deleted.")
	}
	shared.ValidateBin(key, bin3, record)
}
开发者ID:atomx,项目名称:aerospike-client-go,代码行数:42,代码来源:replace.go


示例13: writeIfNotExists

func writeIfNotExists(client *as.Client) {
	key, _ := as.NewKey(*shared.Namespace, *shared.Set, "udfkey3")
	binName := "udfbin3"

	// Delete record if it already exists.
	client.Delete(shared.WritePolicy, key)

	// Write record only if not already exists. This should succeed.
	client.Execute(shared.WritePolicy, key, "record_example", "writeUnique", as.NewValue(binName), as.NewValue("first"))

	// Verify record written.
	record, err := client.Get(shared.Policy, key, binName)
	shared.PanicOnError(err)
	expected := "first"
	received := record.Bins[binName].(string)

	if received == expected {
		log.Printf("Record written: namespace=%s set=%s key=%s bin=%s value=%s",
			key.Namespace(), key.SetName(), key.Value(), binName, received)
	} else {
		log.Printf("Data mismatch: Expected %s. Received %s.", expected, received)
	}

	// Write record second time. This should fail.
	log.Printf("Attempt second write.")
	client.Execute(shared.WritePolicy, key, "record_example", "writeUnique", as.NewValue(binName), as.NewValue("second"))

	// Verify record not written.
	record, err = client.Get(shared.Policy, key, binName)
	shared.PanicOnError(err)
	received = record.Bins[binName].(string)

	if received == expected {
		log.Printf("Success. Record remained unchanged: namespace=%s set=%s key=%s bin=%s value=%s",
			key.Namespace(), key.SetName(), key.Value(), binName, received)
	} else {
		log.Printf("Data mismatch: Expected %s. Received %s.", expected, received)
	}
}
开发者ID:Kavec,项目名称:aerospike-client-go,代码行数:39,代码来源:udf.go


示例14: runExample

func runExample(client *as.Client) {
	key, err := as.NewKey(*shared.Namespace, *shared.Set, "prependkey")
	shared.PanicOnError(err)

	binName := "prependbin"

	// Delete record if it already exists.
	client.Delete(shared.WritePolicy, key)

	bin := as.NewBin(binName, "World")
	log.Println("Initial prepend will create record.  Initial value is ", bin.Value, ".")
	client.PrependBins(shared.WritePolicy, key, bin)

	bin = as.NewBin(binName, "Hello ")
	log.Println("Prepend \"", bin.Value, "\" to existing record.")
	client.PrependBins(shared.WritePolicy, key, bin)

	record, err := client.Get(shared.Policy, key, bin.Name)
	shared.PanicOnError(err)

	if record == nil {
		log.Fatalf(
			"Failed to get: namespace=%s set=%s key=%s",
			key.Namespace(), key.SetName(), key.Value())
	}

	// The value received from the server is an unsigned byte stream.
	// Convert to an integer before comparing with expected.
	received := record.Bins[bin.Name]
	expected := "Hello World"

	if received == expected {
		log.Printf("Prepend successful: ns=%s set=%s key=%s bin=%s value=%s",
			key.Namespace(), key.SetName(), key.Value(), bin.Name, received)
	} else {
		log.Fatalf("Prepend mismatch: Expected %s. Received %s.", expected, received)
	}
}
开发者ID:Kavec,项目名称:aerospike-client-go,代码行数:38,代码来源:prepend.go


示例15: writeIfGenerationNotChanged

func writeIfGenerationNotChanged(client *as.Client) {
	key, _ := as.NewKey(*shared.Namespace, *shared.Set, "udfkey2")
	bin := as.NewBin("udfbin2", "string value")

	// Seed record.
	client.PutBins(shared.WritePolicy, key, bin)

	// Get record generation.
	gen, err := client.Execute(shared.WritePolicy, key, "record_example", "getGeneration")
	shared.PanicOnError(err)

	// Write record if generation has not changed.
	client.Execute(shared.WritePolicy, key, "record_example", "writeIfGenerationNotChanged", as.NewValue(bin.Name), bin.Value, as.NewValue(gen))
	log.Printf("Record written.")
}
开发者ID:Kavec,项目名称:aerospike-client-go,代码行数:15,代码来源:udf.go


示例16: writeUsingUdf

func writeUsingUdf(client *as.Client) {
	key, _ := as.NewKey(*shared.Namespace, *shared.Set, "udfkey1")
	bin := as.NewBin("udfbin1", "string value")

	client.Execute(shared.WritePolicy, key, "record_example", "writeBin", as.NewValue(bin.Name), bin.Value)

	record, err := client.Get(shared.Policy, key, bin.Name)
	shared.PanicOnError(err)
	expected := bin.Value.String()
	received := record.Bins[bin.Name].(string)

	if received == expected {
		log.Printf("Data matched: namespace=%s set=%s key=%s bin=%s value=%s",
			key.Namespace(), key.SetName(), key.Value(), bin.Name, received)
	} else {
		log.Printf("Data mismatch: Expected %s. Received %s.", expected, received)
	}
}
开发者ID:Kavec,项目名称:aerospike-client-go,代码行数:18,代码来源:udf.go


示例17: runGetHeaderExample

// Read record header data.
func runGetHeaderExample(client *as.Client) {
	key, _ := as.NewKey(*shared.Namespace, *shared.Set, "putgetkey")

	log.Printf("Get record header: namespace=%s set=%s key=%s", key.Namespace(), key.SetName(), key.Value())
	record, err := client.GetHeader(shared.Policy, key)
	shared.PanicOnError(err)

	if record == nil {
		panic(errors.New(fmt.Sprintf(
			"Failed to get: namespace=%s set=%s key=%s", key.Namespace(), key.SetName(), key.Value())))
	}

	// Generation should be greater than zero.  Make sure it's populated.
	if record.Generation == 0 {
		panic(errors.New(fmt.Sprintf(
			"Invalid record header: generation=%d expiration=%d", record.Generation, record.Expiration)))
	}
	log.Printf("Received: generation=%d expiration=%d (%s)\n", record.Generation, record.Expiration, time.Duration(record.Expiration)*time.Second)
}
开发者ID:shatil,项目名称:aerospike-client-go,代码行数:20,代码来源:putget.go


示例18: testMapComplex

/**
 * Write/Read map[interface{}]interface{} directly instead of relying on java serializer.
 */
func testMapComplex(client *as.Client) {
	log.Printf("Read/Write map[interface{}]interface{}")
	key, _ := as.NewKey(*shared.Namespace, *shared.Set, "mapkey2")
	client.Delete(shared.WritePolicy, key)

	blob := []byte{3, 52, 125}
	list := []int{
		100034,
		12384955,
		3,
		512,
	}

	amap := map[interface{}]interface{}{
		"key1": "string1",
		"key2": 2,
		"key3": blob,
		"key4": list,
	}

	bin := as.NewBin("mapbin2", amap)
	client.PutBins(shared.WritePolicy, key, bin)

	record, err := client.Get(shared.Policy, key, bin.Name)
	shared.PanicOnError(err)
	receivedMap := record.Bins[bin.Name].(map[interface{}]interface{})

	validateSize(4, len(receivedMap))
	validate("string1", receivedMap["key1"])
	// Server convert numbers to long, so must expect long.
	validate(2, receivedMap["key2"])
	validateBytes(blob, receivedMap["key3"].([]byte))

	receivedInner := receivedMap["key4"].([]interface{})
	validateSize(4, len(receivedInner))
	validate(100034, receivedInner[0])
	validate(12384955, receivedInner[1])
	validate(3, receivedInner[2])
	validate(512, receivedInner[3])

	log.Printf("Read/Write map[interface{}]interface{} successful")
}
开发者ID:shatil,项目名称:aerospike-client-go,代码行数:45,代码来源:list_map.go


示例19: runReplaceOnlyExample

func runReplaceOnlyExample(client *as.Client) {
	key, err := as.NewKey(*shared.Namespace, *shared.Set, "replaceonlykey")
	shared.PanicOnError(err)
	bin := as.NewBin("bin", "value")

	// Delete record if it already exists.
	client.Delete(shared.WritePolicy, key)

	log.Printf("Replace record requiring that it exists: namespace=%s set=%s key=%s",
		key.Namespace(), key.SetName(), key.Value())

	wpolicy := as.NewWritePolicy(0, 0)
	wpolicy.RecordExistsAction = as.REPLACE_ONLY
	err = client.PutBins(wpolicy, key, bin)
	if ae, ok := err.(ast.AerospikeError); ok && ae.ResultCode() == ast.KEY_NOT_FOUND_ERROR {
		log.Printf("Success. `Not found` error returned as expected.")
	} else {
		log.Fatalln("Failure. This command should have resulted in an error.")
	}
}
开发者ID:shatil,项目名称:aerospike-client-go,代码行数:20,代码来源:replace.go


示例20: runSingleBinExample

// Execute put and get on a server configured as single-bin.
func runSingleBinExample(client *as.Client) {
	key, _ := as.NewKey(*shared.Namespace, *shared.Set, "putgetkey")
	bin := as.NewBin("", "value")

	log.Printf("Single Put: namespace=%s set=%s key=%s value=%s",
		key.Namespace(), key.SetName(), key.Value(), bin.Value)

	client.PutBins(shared.WritePolicy, key, bin)

	log.Printf("Single Get: namespace=%s set=%s key=%s", key.Namespace(), key.SetName(), key.Value())

	record, err := client.Get(shared.Policy, key)
	shared.PanicOnError(err)

	if record == nil {
		panic(errors.New(fmt.Sprintf(
			"Failed to get: namespace=%s set=%s key=%s", key.Namespace(), key.SetName(), key.Value())))
	}

	shared.ValidateBin(key, bin, record)
}
开发者ID:shatil,项目名称:aerospike-client-go,代码行数:22,代码来源:putget.go



注:本文中的github.com/aerospike/aerospike-client-go/examples/shared.PanicOnError函数示例整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
Golang buffer.BytesToUint32函数代码示例发布时间:2022-05-24
下一篇:
Golang aerospike-client-go.Client类代码示例发布时间:2022-05-24
热门推荐
热门话题
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap