Golang dynamodbstreams.New函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Golang中github.com/aws/aws-sdk-go/service/dynamodbstreams.New函数的典型用法代码示例。如果您正苦于以下问题：Golang New函数的具体用法？Golang New怎么用？Golang New使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了New函数的9个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Golang代码示例。

示例1: ExampleDynamoDBStreams_ListStreams

func ExampleDynamoDBStreams_ListStreams() {
	svc := dynamodbstreams.New(nil)

	params := &dynamodbstreams.ListStreamsInput{
		ExclusiveStartStreamARN: aws.String("StreamArn"),
		Limit:     aws.Long(1),
		TableName: aws.String("TableName"),
	}
	resp, err := svc.ListStreams(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

开发者ID:rail，项目名称:aws-sdk-go，代码行数:28，代码来源:examples_test.go

示例2: ExampleDynamoDBStreams_GetShardIterator

func ExampleDynamoDBStreams_GetShardIterator() {
	svc := dynamodbstreams.New(nil)

	params := &dynamodbstreams.GetShardIteratorInput{
		ShardID:           aws.String("ShardId"),           // Required
		ShardIteratorType: aws.String("ShardIteratorType"), // Required
		StreamARN:         aws.String("StreamArn"),         // Required
		SequenceNumber:    aws.String("SequenceNumber"),
	}
	resp, err := svc.GetShardIterator(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

开发者ID:rail，项目名称:aws-sdk-go，代码行数:29，代码来源:examples_test.go

示例3: ExampleDynamoDBStreams_ListStreams

func ExampleDynamoDBStreams_ListStreams() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := dynamodbstreams.New(sess)

	params := &dynamodbstreams.ListStreamsInput{
		ExclusiveStartStreamArn: aws.String("StreamArn"),
		Limit:     aws.Int64(1),
		TableName: aws.String("TableName"),
	}
	resp, err := svc.ListStreams(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

开发者ID:acquia，项目名称:fifo2kinesis，代码行数:26，代码来源:examples_test.go

示例4: ExampleDynamoDBStreams_GetShardIterator

func ExampleDynamoDBStreams_GetShardIterator() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := dynamodbstreams.New(sess)

	params := &dynamodbstreams.GetShardIteratorInput{
		ShardId:           aws.String("ShardId"),           // Required
		ShardIteratorType: aws.String("ShardIteratorType"), // Required
		StreamArn:         aws.String("StreamArn"),         // Required
		SequenceNumber:    aws.String("SequenceNumber"),
	}
	resp, err := svc.GetShardIterator(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

开发者ID:acquia，项目名称:fifo2kinesis，代码行数:27，代码来源:examples_test.go

示例5: ExampleDynamoDBStreams_GetRecords

func ExampleDynamoDBStreams_GetRecords() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := dynamodbstreams.New(sess)

	params := &dynamodbstreams.GetRecordsInput{
		ShardIterator: aws.String("ShardIterator"), // Required
		Limit:         aws.Int64(1),
	}
	resp, err := svc.GetRecords(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

开发者ID:acquia，项目名称:fifo2kinesis，代码行数:25，代码来源:examples_test.go

示例6: ExampleDynamoDBStreams_DescribeStream

func ExampleDynamoDBStreams_DescribeStream() {
	sess, err := session.NewSession()
	if err != nil {
		fmt.Println("failed to create session,", err)
		return
	}

	svc := dynamodbstreams.New(sess)

	params := &dynamodbstreams.DescribeStreamInput{
		StreamArn:             aws.String("StreamArn"), // Required
		ExclusiveStartShardId: aws.String("ShardId"),
		Limit: aws.Int64(1),
	}
	resp, err := svc.DescribeStream(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}

开发者ID:acquia，项目名称:fifo2kinesis，代码行数:26，代码来源:examples_test.go

示例7: init

func init() {
	Before("@dynamodbstreams", func() {
		World["client"] = dynamodbstreams.New(nil)
	})
}

开发者ID:skion，项目名称:amazon-ecs-cli，代码行数:5，代码来源:client.go

示例8: init

func init() {
	gucumber.Before("@dynamodbstreams", func() {
		gucumber.World["client"] = dynamodbstreams.New(smoke.Session)
	})
}

开发者ID:ColourboxDevelopment，项目名称:aws-sdk-go，代码行数:5，代码来源:client.go

示例9: TestInterface

func TestInterface(t *testing.T) {
	assert.Implements(t, (*dynamodbstreamsiface.DynamoDBStreamsAPI)(nil), dynamodbstreams.New(nil))
}

开发者ID:jloper3，项目名称:amazon-ecs-cli，代码行数:3，代码来源:interface_test.go

注：本文中的github.com/aws/aws-sdk-go/service/dynamodbstreams.New函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。