• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    迪恩网络公众号
登陆 注册
描述文字

Golang gl.ShadeModel函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了Golang中github.com/banthar/gl.ShadeModel函数的典型用法代码示例。如果您正苦于以下问题：Golang ShadeModel函数的具体用法？Golang ShadeModel怎么用？Golang ShadeModel使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了ShadeModel函数的16个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Golang代码示例。

示例1: initGL

func (this *Window) initGL() {

	runtime.LockOSThread()

	if gl.Init() != 0 {
		panic("gl init error")
	}

	gl.ShadeModel(gl.SMOOTH)
	gl.CullFace(gl.BACK)
	gl.FrontFace(gl.CCW)
	gl.Enable(gl.CULL_FACE)
	gl.Enable(gl.DEPTH_TEST)
	gl.Enable(gl.LIGHTING)
	gl.Enable(gl.BLEND)
	gl.BlendFunc(gl.SRC_ALPHA, gl.ONE_MINUS_SRC_ALPHA)
	gl.Enable(gl.TEXTURE_2D)
	gl.TexEnvf(gl.TEXTURE_ENV, gl.TEXTURE_ENV_MODE, gl.MODULATE)
	gl.TexParameteri(gl.TEXTURE_2D, gl.TEXTURE_WRAP_S, gl.REPEAT)
	gl.TexParameteri(gl.TEXTURE_2D, gl.TEXTURE_WRAP_T, gl.REPEAT)
	var magFilter, minFilter = gl.LINEAR, gl.LINEAR
	if globals.CreateMipmaps {
		minFilter = gl.LINEAR_MIPMAP_LINEAR
	}
	gl.TexParameteri(gl.TEXTURE_2D, gl.TEXTURE_MAG_FILTER, magFilter)
	gl.TexParameteri(gl.TEXTURE_2D, gl.TEXTURE_MIN_FILTER, minFilter)
	gl.Enable(gl.NORMALIZE)
	gl.ClearColor(.1, .1, .1, 1)
	this.setGLViewport()
}
开发者ID:swantescholz，项目名称:coding，代码行数:30，代码来源:window.go


示例2: initGL

func (this *Window) initGL() {
	gl.ShadeModel(gl.SMOOTH) //SMOOTH or FLAT
	gl.CullFace(gl.BACK)
	gl.FrontFace(gl.CCW)
	gl.Enable(gl.CULL_FACE)
	gl.Enable(gl.DEPTH_TEST)
	gl.Enable(gl.LIGHTING)
	gl.Enable(gl.BLEND)
	gl.BlendFunc(gl.SRC_ALPHA, gl.ONE_MINUS_SRC_ALPHA)
	/*gl.Enable(gl.FOG)
	gl.Fogi(gl.FOG_MODE, gl.EXP)
	gl.Fogfv(gl.FOG_COLOR, []float32{0.5,0.5,0.5,1.0})
	gl.Fogf(gl.FOG_DENSITY, 0.0035)
	gl.Hint(gl.FOG_HINT, gl.DONT_CARE)
	gl.Fogf(gl.FOG_START, 1.0)
	gl.Fogf(gl.FOG_END  , 5000.0)//*/
	gl.Enable(gl.TEXTURE_2D)
	gl.TexEnvf(gl.TEXTURE_ENV, gl.TEXTURE_ENV_MODE, gl.MODULATE) //before: decal, std: modulate
	//gl.TexParameteri(gl.TEXTURE_2D, gl.GENERATE_MIPMAP, true) //mipmaps (dont use it!, its bad!)
	gl.TexParameteri(gl.TEXTURE_2D, gl.TEXTURE_WRAP_S, gl.REPEAT)
	gl.TexParameteri(gl.TEXTURE_2D, gl.TEXTURE_WRAP_T, gl.REPEAT)
	gl.TexParameteri(gl.TEXTURE_2D, gl.TEXTURE_MAG_FILTER, gl.LINEAR)               //GL_LINEAR or GL_NEAREST, no mipmap here
	gl.TexParameteri(gl.TEXTURE_2D, gl.TEXTURE_MIN_FILTER, gl.LINEAR_MIPMAP_LINEAR) //*/
	gl.ClearColor(.1, .1, .1, 1)
	//gl.Enable(gl.PRIMITIVE_RESTART)
	//gl.PrimitiveRestartIndex()
	this.setGLViewport()
}
开发者ID:swantescholz，项目名称:go，代码行数:28，代码来源:window.go


示例3: main

func main() {
	var err error

	if err = glfw.Init(); err != nil {
		fmt.Fprintf(os.Stderr, "[e] %v\n", err)
		return
	}
	defer glfw.Terminate()

	if err = glfw.OpenWindow(Width, Height, 8, 8, 8, 8, 0, 8, glfw.Windowed); err != nil {
		fmt.Fprintf(os.Stderr, "[e] %v\n", err)
		return
	}
	defer glfw.CloseWindow()

	glfw.SetSwapInterval(1)
	glfw.SetWindowTitle(Title)
	glfw.SetWindowSizeCallback(onResize)
	glfw.SetKeyCallback(onKey)

	gl.ShadeModel(gl.SMOOTH)
	gl.ClearColor(0, 0, 0, 0)
	gl.ClearDepth(1)
	gl.Enable(gl.TEXTURE_2D)

	for running && glfw.WindowParam(glfw.Opened) == 1 {
		update()
		draw()
	}
}
开发者ID:samnardoni，项目名称:ca，代码行数:30，代码来源:ca.go


示例4: initGL

func initGL() {
	gl.ShadeModel(gl.SMOOTH)
	gl.ClearColor(0, 0, 0, 0)
	gl.ClearDepth(1)
	gl.Enable(gl.DEPTH_TEST)
	gl.DepthFunc(gl.LEQUAL)
	gl.Hint(gl.PERSPECTIVE_CORRECTION_HINT, gl.NICEST)
}
开发者ID:sycoso，项目名称:glfw，代码行数:8，代码来源:main.go


示例5: initGL

func initGL() {
	gl.EnableClientState(gl.VERTEX_ARRAY)
	gl.ShadeModel(gl.SMOOTH)
	gl.ClearColor(0, 0, 0, 0)
	gl.ClearDepth(1)
	gl.DepthFunc(gl.LEQUAL)
	gl.Hint(gl.PERSPECTIVE_CORRECTION_HINT, gl.NICEST)
	gl.Enable(gl.DEPTH_TEST)
	gl.Enable(gl.BLEND)
	gl.BlendFunc(gl.SRC_ALPHA, gl.ONE_MINUS_SRC_ALPHA)
}
开发者ID:ftrvxmtrx，项目名称:gochipmunk，代码行数:11，代码来源:main.go


示例6: initGL

// general OpenGL initialization
func initGL() {
	LoadGLTexture("data/star.bmp")

	gl.Enable(gl.TEXTURE_2D)
	gl.Enable(gl.BLEND)
	gl.BlendFunc(gl.SRC_ALPHA, gl.ONE)
	gl.ShadeModel(gl.SMOOTH)
	gl.ClearColor(0.0, 0.0, 0.0, 0.5)
	gl.ClearDepth(1.0)
	gl.Hint(gl.PERSPECTIVE_CORRECTION_HINT, gl.NICEST)
}
开发者ID:navneet1v，项目名称:opengl-go-tutorials，代码行数:12，代码来源:lesson09.go


示例7: initGL

func initGL() (err error) {
	if err = loadTextures(); err != nil {
		return
	}

	gl.ShadeModel(gl.SMOOTH)
	gl.ClearColor(0, 0, 0, 0)
	gl.ClearDepth(1)
	gl.DepthFunc(gl.LEQUAL)
	gl.Hint(gl.PERSPECTIVE_CORRECTION_HINT, gl.NICEST)
	gl.Enable(gl.DEPTH_TEST)
	gl.Enable(gl.TEXTURE_2D)
	return
}
开发者ID:andrebq，项目名称:glfw，代码行数:14，代码来源:main.go


示例8: initGL

// general OpenGL initialization
func initGL() {
	gl.Enable(gl.TEXTURE_2D)
	gl.ShadeModel(gl.SMOOTH)
	gl.ClearColor(0.0, 0.0, 0.0, 0.5)
	gl.ClearDepth(1.0)
	gl.Enable(gl.DEPTH_TEST)
	gl.DepthFunc(gl.LEQUAL)
	gl.Hint(gl.PERSPECTIVE_CORRECTION_HINT, gl.NICEST)

	// Setup the light
	gl.Lightfv(gl.LIGHT1, gl.AMBIENT, lightAmbient[:])   // ambient lighting
	gl.Lightfv(gl.LIGHT1, gl.DIFFUSE, lightDiffuse[:])   // make it diffuse
	gl.Lightfv(gl.LIGHT1, gl.POSITION, lightPosition[:]) // and place it
	gl.Enable(gl.LIGHT1)                                 // and finally turn it on.

	gl.Color4f(1.0, 1.0, 1.0, 0.5)     // Full Brightness, 50% Alpha ( NEW )
	gl.BlendFunc(gl.SRC_ALPHA, gl.ONE) // Blending Function For Translucency Based On Source Alpha Value ( NEW )
}
开发者ID:navneet1v，项目名称:opengl-go-tutorials，代码行数:19，代码来源:lesson08.go


示例9: initGL

// general OpenGL initialization
func initGL() {
	// enable smooth shading
	gl.ShadeModel(gl.SMOOTH)

	// Set the background to black
	gl.ClearColor(0.0, 0.0, 0.0, 0.0)

	// Depth buffer setup
	gl.ClearDepth(1.0)

	// Enable depth testing
	gl.Enable(gl.DEPTH_TEST)

	// The type of test
	gl.DepthFunc(gl.LEQUAL)

	// Nicest perspective correction
	gl.Hint(gl.PERSPECTIVE_CORRECTION_HINT, gl.NICEST)
}
开发者ID:navneet1v，项目名称:opengl-go-tutorials，代码行数:20，代码来源:lesson01.go


示例10: initGL

// general OpenGL initialization
func initGL() {
	LoadGLTextures("data/mud.bmp")

	gl.Enable(gl.TEXTURE_2D)
	gl.ShadeModel(gl.SMOOTH)
	gl.ClearColor(0.0, 0.0, 0.0, 0.0)
	gl.ClearDepth(1.0)
	gl.Enable(gl.DEPTH_TEST)
	gl.DepthFunc(gl.LEQUAL)
	gl.Hint(gl.PERSPECTIVE_CORRECTION_HINT, gl.NICEST)

	gl.Lightfv(gl.LIGHT1, gl.AMBIENT, lightAmbient[:])
	gl.Lightfv(gl.LIGHT1, gl.DIFFUSE, lightDiffuse[:])
	gl.Lightfv(gl.LIGHT1, gl.POSITION, lightPosition[:])
	gl.Enable(gl.LIGHT1)

	gl.Color4f(1.0, 1.0, 1.0, 0.5)
	gl.BlendFunc(gl.SRC_ALPHA, gl.ONE)
}
开发者ID:navneet1v，项目名称:opengl-go-tutorials，代码行数:20，代码来源:lesson10.go


示例11: setup_opengl

func setup_opengl(width, height int) {
	ratio := float64(width) / float64(height)
	gl.ShadeModel(gl.SMOOTH)
	gl.CullFace(gl.BACK)
	gl.FrontFace(gl.CCW)
	gl.Enable(gl.CULL_FACE)
	gl.ClearColor(0, 0, 0, 0)
	gl.Viewport(0, 0, width, height)
	gl.MatrixMode(gl.PROJECTION)
	gl.LoadIdentity()

	gluPerspective := func(fovy, aspect, zNear, zFar float64) {
		top := math.Tan(fovy*0.5) * zNear
		bottom := -top
		left := aspect * bottom
		right := -left
		gl.Frustum(left, right, bottom, top, zNear, zFar)
	}
	gluPerspective(60.0, ratio, 1.0, 1024.0)
}
开发者ID:glenn-brown，项目名称:aima，代码行数:20，代码来源:sdldoc.go


示例12: initGL

func initGL() {
	gl.ShadeModel(gl.SMOOTH)
	gl.ClearColor(0, 0, 0, 0)
	gl.ClearDepth(1)
	gl.Enable(gl.DEPTH_TEST)
	gl.DepthFunc(gl.LEQUAL)
	gl.Hint(gl.PERSPECTIVE_CORRECTION_HINT, gl.NICEST)

	globalState.light[0] = 0
	globalState.light[1] = 20
	globalState.light[2] = -10
	globalState.light[3] = 1

	gl.Lightfv(gl.LIGHT1, gl.AMBIENT, []float32{1, 1, 1})
	gl.Lightfv(gl.LIGHT1, gl.DIFFUSE, []float32{1, 1, 1})
	gl.Lightfv(gl.LIGHT1, gl.POSITION, globalState.light[:])
	gl.Enable(gl.LIGHT1)

	gl.Enable(gl.LIGHTING)
}
开发者ID:andrebq，项目名称:wfobj，代码行数:20，代码来源:main.go


示例13: initGL

// general OpenGL initialization
func initGL() {
	gl.Enable(gl.TEXTURE_2D)
	gl.ShadeModel(gl.SMOOTH)
	gl.ClearColor(0.0, 0.0, 0.0, 0.5)
	gl.ClearDepth(1.0)
	gl.Enable(gl.DEPTH_TEST)
	gl.DepthFunc(gl.LEQUAL)
	gl.Hint(gl.PERSPECTIVE_CORRECTION_HINT, gl.NICEST)

	// Setup the light
	gl.Lightfv(gl.LIGHT1, gl.AMBIENT, lightAmbient1[:])   // ambient lighting
	gl.Lightfv(gl.LIGHT1, gl.DIFFUSE, lightDiffuse1[:])   // make it diffuse
	gl.Lightfv(gl.LIGHT1, gl.POSITION, lightPosition1[:]) // and place it
	gl.Enable(gl.LIGHT1)                                  // and finally turn it on.

	gl.Lightfv(gl.LIGHT2, gl.AMBIENT, lightAmbient2[:])   // ambient lighting
	gl.Lightfv(gl.LIGHT2, gl.DIFFUSE, lightDiffuse2[:])   // make it diffuse
	gl.Lightfv(gl.LIGHT2, gl.POSITION, lightPosition2[:]) // and place it
	gl.Enable(gl.LIGHT2)                                  // and finally turn it on.
}
开发者ID:navneet1v，项目名称:opengl-go-tutorials，代码行数:21，代码来源:lesson07.go


示例14: gear

func gear(inner_radius, outer_radius, width float64, teeth int, tooth_depth float64) {
	var i int
	var r0, r1, r2 float64
	var angle, da float64
	var u, v, len float64

	r0 = inner_radius
	r1 = outer_radius - tooth_depth/2.0
	r2 = outer_radius + tooth_depth/2.0

	da = 2.0 * math.Pi / float64(teeth) / 4.0

	gl.ShadeModel(gl.FLAT)

	gl.Normal3d(0.0, 0.0, 1.0)

	/* draw front face */
	gl.Begin(gl.QUAD_STRIP)
	for i = 0; i <= teeth; i++ {
		angle = float64(i) * 2.0 * math.Pi / float64(teeth)
		gl.Vertex3d(r0*math.Cos(angle), r0*math.Sin(angle), width*0.5)
		gl.Vertex3d(r1*math.Cos(angle), r1*math.Sin(angle), width*0.5)
		if i < teeth {
			gl.Vertex3d(r0*math.Cos(angle), r0*math.Sin(angle), width*0.5)
			gl.Vertex3d(r1*math.Cos(angle+3*da), r1*math.Sin(angle+3*da), width*0.5)
		}
	}
	gl.End()

	/* draw front sides of teeth */
	gl.Begin(gl.QUADS)
	da = 2.0 * math.Pi / float64(teeth) / 4.0
	for i = 0; i < teeth; i++ {
		angle = float64(i) * 2.0 * math.Pi / float64(teeth)

		gl.Vertex3d(r1*math.Cos(angle), r1*math.Sin(angle), width*0.5)
		gl.Vertex3d(r2*math.Cos(angle+da), r2*math.Sin(angle+da), width*0.5)
		gl.Vertex3d(r2*math.Cos(angle+2*da), r2*math.Sin(angle+2*da), width*0.5)
		gl.Vertex3d(r1*math.Cos(angle+3*da), r1*math.Sin(angle+3*da), width*0.5)
	}
	gl.End()

	gl.Normal3d(0.0, 0.0, -1.0)

	/* draw back face */
	gl.Begin(gl.QUAD_STRIP)
	for i = 0; i <= teeth; i++ {
		angle = float64(i) * 2.0 * math.Pi / float64(teeth)
		gl.Vertex3d(r1*math.Cos(angle), r1*math.Sin(angle), -width*0.5)
		gl.Vertex3d(r0*math.Cos(angle), r0*math.Sin(angle), -width*0.5)
		if i < teeth {
			gl.Vertex3d(r1*math.Cos(angle+3*da), r1*math.Sin(angle+3*da), -width*0.5)
			gl.Vertex3d(r0*math.Cos(angle), r0*math.Sin(angle), -width*0.5)
		}
	}
	gl.End()

	/* draw back sides of teeth */
	gl.Begin(gl.QUADS)
	da = 2.0 * math.Pi / float64(teeth) / 4.0
	for i = 0; i < teeth; i++ {
		angle = float64(i) * 2.0 * math.Pi / float64(teeth)

		gl.Vertex3d(r1*math.Cos(angle+3*da), r1*math.Sin(angle+3*da), -width*0.5)
		gl.Vertex3d(r2*math.Cos(angle+2*da), r2*math.Sin(angle+2*da), -width*0.5)
		gl.Vertex3d(r2*math.Cos(angle+da), r2*math.Sin(angle+da), -width*0.5)
		gl.Vertex3d(r1*math.Cos(angle), r1*math.Sin(angle), -width*0.5)
	}
	gl.End()

	/* draw outward faces of teeth */
	gl.Begin(gl.QUAD_STRIP)
	for i = 0; i < teeth; i++ {
		angle = float64(i) * 2.0 * math.Pi / float64(teeth)

		gl.Vertex3d(r1*math.Cos(angle), r1*math.Sin(angle), width*0.5)
		gl.Vertex3d(r1*math.Cos(angle), r1*math.Sin(angle), -width*0.5)
		u = r2*math.Cos(angle+da) - r1*math.Cos(angle)
		v = r2*math.Sin(angle+da) - r1*math.Sin(angle)
		len = math.Sqrt(u*u + v*v)
		u /= len
		v /= len
		gl.Normal3d(v, -u, 0.0)
		gl.Vertex3d(r2*math.Cos(angle+da), r2*math.Sin(angle+da), width*0.5)
		gl.Vertex3d(r2*math.Cos(angle+da), r2*math.Sin(angle+da), -width*0.5)
		gl.Normal3d(math.Cos(angle), math.Sin(angle), 0.0)
		gl.Vertex3d(r2*math.Cos(angle+2*da), r2*math.Sin(angle+2*da), width*0.5)
		gl.Vertex3d(r2*math.Cos(angle+2*da), r2*math.Sin(angle+2*da), -width*0.5)
		u = r1*math.Cos(angle+3*da) - r2*math.Cos(angle+2*da)
		v = r1*math.Sin(angle+3*da) - r2*math.Sin(angle+2*da)
		gl.Normal3d(v, -u, 0.0)
		gl.Vertex3d(r1*math.Cos(angle+3*da), r1*math.Sin(angle+3*da), width*0.5)
		gl.Vertex3d(r1*math.Cos(angle+3*da), r1*math.Sin(angle+3*da), -width*0.5)
		gl.Normal3d(math.Cos(angle), math.Sin(angle), 0.0)
	}

	gl.Vertex3d(r1*math.Cos(0), r1*math.Sin(0), width*0.5)
	gl.Vertex3d(r1*math.Cos(0), r1*math.Sin(0), -width*0.5)

	gl.End()
//.........这里部分代码省略.........
开发者ID:nkostelnik，项目名称:gl，代码行数:101，代码来源:glfwgears.go


示例15: main

func main() {
	w := 500
	h := 500
	fov := 45.0
	clip_min := 0.1
	clip_max := 1000.0

	aspect_ratio := float64(w) / float64(h)

	glfw.Init()
	glfw.OpenWindow(w, h, 8, 8, 8, 8, 8, 0, glfw.Windowed)

	glfw.SetWindowTitle("Shader Test")
	glfw.SetWindowSizeCallback(resize_window)
	glfw.SetKeyCallback(key_callback)

	gl.ClearColor(0.3, 0.3, 0.3, 1.0)
	gl.ShadeModel(gl.SMOOTH)

	size_window(w, h, fov, aspect_ratio, clip_min, clip_max)

	//Testing sprites
	test_sprite := sprite{height: 1.0, width: 1.0}
	test_sprite.tex = texture("./assets/hedge.gif")
	test_sprite.Y = 3

	new_guy := sprite{height: 0.5, width: 0.5}
	new_guy.tex = texture("./assets/red2.png")
	new_guy.Y = 5

	renderees := new(list.List)
	renderees.PushBack(&new_guy)
	renderees.PushBack(&test_sprite)

	my_camera.init(Vector{0.0, -1.0, 0.0})
	my_camera.front = Vector{0.0, 1.0, 0.0}
	my_camera.top = Vector{0.0, 0.0, 1.0}
	//End testing sprites

	physics_objects := new(list.List)
	physics_objects.PushBack(my_camera)

	dt, err := time.ParseDuration("16.67ms")
	if err != nil {
		die(err)
	}

	fmt.Println("Timestep: ", dt)
	var t float64 = 0
	running := true
	for running {
		t0 := time.Now()
		update(physics_objects, float64(dt.Nanoseconds())/1e6)
		t += 0.025
		new_guy.X = math.Cos(t)
		new_guy.Y = math.Sin(t) + 3.0

		//my_camera.point_at(Vector{new_guy.X, new_guy.Y, new_guy.Z})

		general_render(renderees, my_camera)
		glfw.SwapBuffers()

		dt = time.Since(t0)
		rate := time.Microsecond * 16670
		if dt < rate {
			time.Sleep((rate - dt))
			//fmt.Println("This frame took", float64(dt.Nanoseconds())/1000000, "ms to render.")
		}
		running = glfw.Key(glfw.KeyEsc) == 0 && glfw.WindowParam(glfw.Opened) != 0
	}
}
开发者ID:esnowkropla，项目名称:dep，代码行数:71，代码来源:main.go


示例16: initGame

func initGame() {

	viewport.Zoomstd()
	viewport.Rotx(25)
	viewport.Roty(70)

	picker = NewPicker()

	sdl.Init(sdl.INIT_VIDEO)
	if ttf.Init() != 0 {
		panic("Could not initalize fonts")
	}

	sdl.GL_SetAttribute(sdl.GL_DOUBLEBUFFER, 1)
	screen := sdl.SetVideoMode(1024, 600, 32, sdl.OPENGL|sdl.RESIZABLE)

	if screen == nil {
		sdl.Quit()
		panic("Couldn't set GL video mode: " + sdl.GetError() + "\n")
	}

	if gl.Init() != 0 {
		panic("gl error")
	}

	sdl.WM_SetCaption("Amberfell", "amberfell")

	gl.Clear(gl.COLOR_BUFFER_BIT | gl.DEPTH_BUFFER_BIT)
	// gl.ShadeModel(gl.FLAT)

	gl.Enable(gl.BLEND)
	gl.BlendFunc(gl.SRC_ALPHA, gl.ONE_MINUS_SRC_ALPHA)
	gl.ShadeModel(gl.SMOOTH)
	gl.Enable(gl.LIGHTING)
	gl.Enable(gl.LIGHT0)
	gl.Enable(gl.LIGHT1)

	gl.Enable(gl.COLOR_MATERIAL)

	gl.MatrixMode(gl.PROJECTION)
	gl.LoadIdentity()

	gl.MatrixMode(gl.MODELVIEW)
	gl.LoadIdentity()

	gl.ClearDepth(1.0)       // Depth Buffer Setup
	gl.Enable(gl.DEPTH_TEST) // Enables Depth Testing
	gl.Hint(gl.PERSPECTIVE_CORRECTION_HINT, gl.FASTEST)

	gl.Enable(gl.TEXTURE_2D)
	//	LoadMapTextures()
	LoadPlayerTextures()
	LoadWolfTextures()
	InitItems()

	pauseFont = NewFont("res/Jura-DemiBold.ttf", 48, color.RGBA{255, 255, 255, 0})
	consoleFont = NewFont("res/Jura-DemiBold.ttf", 16, color.RGBA{255, 255, 255, 0})
	inventoryItemFont = NewFont("res/Jura-DemiBold.ttf", 14, color.RGBA{240, 240, 240, 0})

	textures[TEXTURE_PICKER] = loadTexture("res/dial.png")
	terrainTexture = loadTexture("res/tiles.png")
	itemsTexture = loadTexture("res/items.png")

	gVertexBuffer = NewVertexBuffer(10000, terrainTexture)
	gGuiBuffer = NewVertexBuffer(1000, terrainTexture)

	WolfModel = LoadModel("res/wolf.mm3d")

	TheWorld = NewWorld()

	ThePlayer = new(Player)
	ThePlayer.Init(0, PLAYER_START_X, PLAYER_START_Z)

	inventory = NewInventory()

	viewport.Reshape(int(screen.W), int(screen.H))
	PreloadChunks(400)

}
开发者ID:caustin，项目名称:amberfell，代码行数:79，代码来源:amberfell.go



注：本文中的github.com/banthar/gl.ShadeModel函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
Golang gl.Translated函数代码示例发布时间：2022-05-24
下一篇：
Golang gl.Rotatef函数代码示例发布时间：2022-05-24
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap