Golang nsq.ReadResponse函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Golang中github.com/bitly/nsq/nsq.ReadResponse函数的典型用法代码示例。如果您正苦于以下问题：Golang ReadResponse函数的具体用法？Golang ReadResponse怎么用？Golang ReadResponse使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了ReadResponse函数的16个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Golang代码示例。

示例1: subWorker

func subWorker(n int, workers int, tcpAddr string, topic string, channel string, rdyChan chan int, goChan chan int, id int) {
	conn, err := net.DialTimeout("tcp", tcpAddr, time.Second)
	if err != nil {
		panic(err.Error())
	}
	conn.Write(nsq.MagicV2)
	rw := bufio.NewReadWriter(bufio.NewReader(conn), bufio.NewWriter(conn))
	ci := make(map[string]interface{})
	ci["short_id"] = "test"
	ci["long_id"] = "test"
	cmd, _ := nsq.Identify(ci)
	cmd.Write(rw)
	nsq.Subscribe(topic, channel).Write(rw)
	rdyCount := int(math.Min(math.Max(float64(n/workers), 1), 2500))
	rdyChan <- 1
	<-goChan
	nsq.Ready(rdyCount).Write(rw)
	rw.Flush()
	nsq.ReadResponse(rw)
	nsq.ReadResponse(rw)
	num := n / workers
	numRdy := num/rdyCount - 1
	rdy := rdyCount
	for i := 0; i < num; i += 1 {
		resp, err := nsq.ReadResponse(rw)
		if err != nil {
			panic(err.Error())
		}
		frameType, data, err := nsq.UnpackResponse(resp)
		if err != nil {
			panic(err.Error())
		}
		if frameType == nsq.FrameTypeError {
			panic("got something else")
		}
		msg, err := nsq.DecodeMessage(data)
		if err != nil {
			panic(err.Error())
		}
		nsq.Finish(msg.Id).Write(rw)
		rdy--
		if rdy == 0 && numRdy > 0 {
			nsq.Ready(rdyCount).Write(rw)
			rdy = rdyCount
			numRdy--
			rw.Flush()
		}
	}
}

开发者ID:rif，项目名称:golang-stuff，代码行数:49，代码来源:bench_reader.go

示例2: TestChannelUnregister

func TestChannelUnregister(t *testing.T) {
	log.SetOutput(ioutil.Discard)
	defer log.SetOutput(os.Stdout)

	tcpAddr, httpAddr := mustStartLookupd()
	defer lookupd.Exit()

	topics := lookupd.DB.FindRegistrations("topic", "*", "*")
	assert.Equal(t, len(topics), 0)

	topicName := "channel_unregister"

	conn := mustConnectLookupd(t, tcpAddr)
	tcpPort := 5000
	httpPort := 5555
	identify(t, conn, "ip.address", tcpPort, httpPort, "fake-version")

	nsq.Register(topicName, "ch1").Write(conn)
	v, err := nsq.ReadResponse(conn)
	assert.Equal(t, err, nil)
	assert.Equal(t, v, []byte("OK"))

	topics = lookupd.DB.FindRegistrations("topic", topicName, "")
	assert.Equal(t, len(topics), 1)

	channels := lookupd.DB.FindRegistrations("channel", topicName, "*")
	assert.Equal(t, len(channels), 1)

	nsq.UnRegister(topicName, "ch1").Write(conn)
	v, err = nsq.ReadResponse(conn)
	assert.Equal(t, err, nil)
	assert.Equal(t, v, []byte("OK"))

	topics = lookupd.DB.FindRegistrations("topic", topicName, "")
	assert.Equal(t, len(topics), 1)

	// we should still have mention of the topic even though there is no producer
	// (ie. we haven't *deleted* the channel, just unregistered as a producer)
	channels = lookupd.DB.FindRegistrations("channel", topicName, "*")
	assert.Equal(t, len(channels), 1)

	endpoint := fmt.Sprintf("http://%s/lookup?topic=%s", httpAddr, topicName)
	data, err := nsq.ApiRequest(endpoint)
	assert.Equal(t, err, nil)
	returnedProducers, err := data.Get("producers").Array()
	assert.Equal(t, err, nil)
	assert.Equal(t, len(returnedProducers), 1)
}

开发者ID:datastream，项目名称:nsq，代码行数:48，代码来源:nsqlookupd_test.go

示例3: TestTombstonedNodes

func TestTombstonedNodes(t *testing.T) {
	log.SetOutput(ioutil.Discard)
	defer log.SetOutput(os.Stdout)

	tcpAddr, httpAddr := mustStartLookupd()
	defer lookupd.Exit()
	lookupd.inactiveProducerTimeout = 50 * time.Millisecond

	lookupdHTTPAddrs := []string{fmt.Sprintf("%s", httpAddr)}

	topicName := "inactive_nodes"

	conn := mustConnectLookupd(t, tcpAddr)
	identify(t, conn, "ip.address", 5000, 5555, "fake-version")

	nsq.Register(topicName, "channel1").Write(conn)
	_, err := nsq.ReadResponse(conn)
	assert.Equal(t, err, nil)

	producers, _ := lookuputil.GetLookupdProducers(lookupdHTTPAddrs)
	assert.Equal(t, len(producers), 1)
	assert.Equal(t, len(producers[0].Topics), 1)
	assert.Equal(t, producers[0].Topics[0].Topic, topicName)
	assert.Equal(t, producers[0].Topics[0].Tombstoned, false)

	endpoint := fmt.Sprintf("http://%s/tombstone_topic_producer?topic=%s&node=%s", httpAddr, topicName, "ip.address:5555")
	_, err = nsq.ApiRequest(endpoint)
	assert.Equal(t, err, nil)

	producers, _ = lookuputil.GetLookupdProducers(lookupdHTTPAddrs)
	assert.Equal(t, len(producers), 1)
	assert.Equal(t, len(producers[0].Topics), 1)
	assert.Equal(t, producers[0].Topics[0].Topic, topicName)
	assert.Equal(t, producers[0].Topics[0].Tombstoned, true)
}

开发者ID:rif，项目名称:golang-stuff，代码行数:35，代码来源:nsqlookupd_test.go

示例4: subFail

func subFail(t *testing.T, conn net.Conn, topicName string, channelName string) {
	err := nsq.Subscribe(topicName, channelName).Write(conn)
	assert.Equal(t, err, nil)
	resp, err := nsq.ReadResponse(conn)
	frameType, _, err := nsq.UnpackResponse(resp)
	assert.Equal(t, frameType, nsq.FrameTypeError)
}

开发者ID:datastream，项目名称:nsq，代码行数:7，代码来源:protocol_v2_test.go

示例5: TestBasicV2

// exercise the basic operations of the V2 protocol
func TestBasicV2(t *testing.T) {
	log.SetOutput(ioutil.Discard)
	defer log.SetOutput(os.Stdout)

	options := NewNsqdOptions()
	options.clientTimeout = 60 * time.Second
	tcpAddr, _ := mustStartNSQd(options)
	defer nsqd.Exit()

	topicName := "test_v2" + strconv.Itoa(int(time.Now().Unix()))
	topic := nsqd.GetTopic(topicName)
	msg := nsq.NewMessage(<-nsqd.idChan, []byte("test body"))
	topic.PutMessage(msg)

	conn, err := mustConnectNSQd(tcpAddr)
	assert.Equal(t, err, nil)

	identify(t, conn)
	sub(t, conn, topicName, "ch")

	err = nsq.Ready(1).Write(conn)
	assert.Equal(t, err, nil)

	resp, err := nsq.ReadResponse(conn)
	assert.Equal(t, err, nil)
	frameType, data, err := nsq.UnpackResponse(resp)
	msgOut, _ := nsq.DecodeMessage(data)
	assert.Equal(t, frameType, nsq.FrameTypeMessage)
	assert.Equal(t, msgOut.Id, msg.Id)
	assert.Equal(t, msgOut.Body, msg.Body)
	assert.Equal(t, msgOut.Attempts, uint16(1))
}

开发者ID:datastream，项目名称:nsq，代码行数:33，代码来源:protocol_v2_test.go

示例6: TestInactiveNodes

func TestInactiveNodes(t *testing.T) {
	log.SetOutput(ioutil.Discard)
	defer log.SetOutput(os.Stdout)

	tcpAddr, httpAddr, nsqlookupd := mustStartLookupd()
	defer nsqlookupd.Exit()
	nsqlookupd.inactiveProducerTimeout = 50 * time.Millisecond

	lookupdHTTPAddrs := []string{fmt.Sprintf("%s", httpAddr)}

	topicName := "inactive_nodes"

	conn := mustConnectLookupd(t, tcpAddr)
	identify(t, conn, "ip.address", 5000, 5555, "fake-version")

	nsq.Register(topicName, "channel1").Write(conn)
	_, err := nsq.ReadResponse(conn)
	assert.Equal(t, err, nil)

	producers, _ := lookuputil.GetLookupdProducers(lookupdHTTPAddrs)
	assert.Equal(t, len(producers), 1)
	assert.Equal(t, len(producers[0].Topics), 1)
	assert.Equal(t, producers[0].Topics[0].Topic, topicName)
	assert.Equal(t, producers[0].Topics[0].Tombstoned, false)

	time.Sleep(55 * time.Millisecond)

	producers, _ = lookuputil.GetLookupdProducers(lookupdHTTPAddrs)
	assert.Equal(t, len(producers), 0)
}

开发者ID:newsky，项目名称:nsq，代码行数:30，代码来源:nsqlookupd_test.go

示例7: pubWorker

func pubWorker(n int, tcpAddr string, batchSize int, batch [][]byte, topic string) {
	conn, err := net.DialTimeout("tcp", tcpAddr, time.Second)
	if err != nil {
		panic(err.Error())
	}
	conn.Write(nsq.MagicV2)
	rw := bufio.NewReadWriter(bufio.NewReader(conn), bufio.NewWriter(conn))

	num := n / runtime.GOMAXPROCS(0) / batchSize
	for i := 0; i < num; i += 1 {
		cmd, _ := nsq.MultiPublish(topic, batch)
		err := cmd.Write(rw)
		if err != nil {
			panic(err.Error())
		}
		err = rw.Flush()
		if err != nil {
			panic(err.Error())
		}
		resp, err := nsq.ReadResponse(rw)
		if err != nil {
			panic(err.Error())
		}
		_, data, _ := nsq.UnpackResponse(resp)
		if !bytes.Equal(data, []byte("OK")) {
			panic("invalid response")
		}
	}
}

开发者ID:rif，项目名称:golang-stuff，代码行数:29，代码来源:bench_writer.go

示例8: TestTombstoneRecover

func TestTombstoneRecover(t *testing.T) {
	log.SetOutput(ioutil.Discard)
	defer log.SetOutput(os.Stdout)

	tcpAddr, httpAddr := mustStartLookupd()
	defer lookupd.Exit()
	lookupd.tombstoneLifetime = 50 * time.Millisecond

	topicName := "tombstone_recover"
	topicName2 := topicName + "2"

	conn := mustConnectLookupd(t, tcpAddr)
	identify(t, conn, "ip.address", 5000, 5555, "fake-version")

	nsq.Register(topicName, "channel1").Write(conn)
	_, err := nsq.ReadResponse(conn)
	assert.Equal(t, err, nil)

	nsq.Register(topicName2, "channel2").Write(conn)
	_, err = nsq.ReadResponse(conn)
	assert.Equal(t, err, nil)

	endpoint := fmt.Sprintf("http://%s/tombstone_topic_producer?topic=%s&node=%s", httpAddr, topicName, "ip.address:5555")
	_, err = nsq.ApiRequest(endpoint)
	assert.Equal(t, err, nil)

	endpoint = fmt.Sprintf("http://%s/lookup?topic=%s", httpAddr, topicName)
	data, err := nsq.ApiRequest(endpoint)
	assert.Equal(t, err, nil)
	producers, _ := data.Get("producers").Array()
	assert.Equal(t, len(producers), 0)

	endpoint = fmt.Sprintf("http://%s/lookup?topic=%s", httpAddr, topicName2)
	data, err = nsq.ApiRequest(endpoint)
	assert.Equal(t, err, nil)
	producers, _ = data.Get("producers").Array()
	assert.Equal(t, len(producers), 1)

	time.Sleep(55 * time.Millisecond)

	endpoint = fmt.Sprintf("http://%s/lookup?topic=%s", httpAddr, topicName)
	data, err = nsq.ApiRequest(endpoint)
	assert.Equal(t, err, nil)
	producers, _ = data.Get("producers").Array()
	assert.Equal(t, len(producers), 1)
}

开发者ID:datastream，项目名称:nsq，代码行数:46，代码来源:nsqlookupd_test.go

示例9: readValidate

func readValidate(t *testing.T, conn net.Conn, f int32, d string) {
	resp, err := nsq.ReadResponse(conn)
	assert.Equal(t, err, nil)
	frameType, data, err := nsq.UnpackResponse(resp)
	assert.Equal(t, err, nil)
	assert.Equal(t, frameType, f)
	assert.Equal(t, string(data), d)
}

开发者ID:datastream，项目名称:nsq，代码行数:8，代码来源:protocol_v2_test.go

示例10: readValidateOK

func readValidateOK(t *testing.T, conn net.Conn) {
	resp, err := nsq.ReadResponse(conn)
	assert.Equal(t, err, nil)
	frameType, data, err := nsq.UnpackResponse(resp)
	assert.Equal(t, err, nil)
	assert.Equal(t, frameType, nsq.FrameTypeResponse)
	assert.Equal(t, data, []byte("OK"))
}

开发者ID:jmanero，项目名称:nsq，代码行数:8，代码来源:protocol_v2_test.go

示例11: identify

func identify(t *testing.T, conn net.Conn, address string, tcpPort int, httpPort int, version string) {
	ci := make(map[string]interface{})
	ci["tcp_port"] = tcpPort
	ci["http_port"] = httpPort
	ci["address"] = address //TODO: remove for 1.0
	ci["broadcast_address"] = address
	ci["hostname"] = address
	ci["version"] = version
	cmd, _ := nsq.Identify(ci)
	err := cmd.Write(conn)
	assert.Equal(t, err, nil)
	_, err = nsq.ReadResponse(conn)
	assert.Equal(t, err, nil)
}

开发者ID:datastream，项目名称:nsq，代码行数:14，代码来源:nsqlookupd_test.go

示例12: identifyFeatureNegotiation

func identifyFeatureNegotiation(t *testing.T, conn net.Conn) []byte {
	ci := make(map[string]interface{})
	ci["short_id"] = "test"
	ci["long_id"] = "test"
	ci["feature_negotiation"] = true
	cmd, _ := nsq.Identify(ci)
	err := cmd.Write(conn)
	assert.Equal(t, err, nil)
	resp, err := nsq.ReadResponse(conn)
	assert.Equal(t, err, nil)
	frameType, data, err := nsq.UnpackResponse(resp)
	assert.Equal(t, err, nil)
	assert.Equal(t, frameType, nsq.FrameTypeResponse)
	return data
}

开发者ID:datastream，项目名称:nsq，代码行数:15，代码来源:protocol_v2_test.go

示例13: readLoop

func (c *rwcClient) readLoop() {
	for {
		resp, err := nsq.ReadResponse(c)
		if err != nil {
			log.Printf("ReadResponse returned: %v", err)
			break
		}
		_, resp, err = nsq.UnpackResponse(resp)
		if bytes.Equal(resp, []byte("_heartbeat_")) {
			c.write <- nsq.Nop()
			continue
		}
		c.read <- string(resp)
	}
}

开发者ID:voxelbrain，项目名称:k，代码行数:15，代码来源:convenience.go

示例14: TestMultipleConsumerV2

func TestMultipleConsumerV2(t *testing.T) {
	log.SetOutput(ioutil.Discard)
	defer log.SetOutput(os.Stdout)

	msgChan := make(chan *nsq.Message)

	options := NewNsqdOptions()
	options.clientTimeout = 60 * time.Second
	tcpAddr, _ := mustStartNSQd(options)
	defer nsqd.Exit()

	topicName := "test_multiple_v2" + strconv.Itoa(int(time.Now().Unix()))
	topic := nsqd.GetTopic(topicName)
	msg := nsq.NewMessage(<-nsqd.idChan, []byte("test body"))
	topic.GetChannel("ch1")
	topic.GetChannel("ch2")
	topic.PutMessage(msg)

	for _, i := range []string{"1", "2"} {
		conn, err := mustConnectNSQd(tcpAddr)
		assert.Equal(t, err, nil)

		identify(t, conn)
		sub(t, conn, topicName, "ch"+i)

		err = nsq.Ready(1).Write(conn)
		assert.Equal(t, err, nil)

		go func(c net.Conn) {
			resp, _ := nsq.ReadResponse(c)
			_, data, _ := nsq.UnpackResponse(resp)
			msg, _ := nsq.DecodeMessage(data)
			msgChan <- msg
		}(conn)
	}

	msgOut := <-msgChan
	assert.Equal(t, msgOut.Id, msg.Id)
	assert.Equal(t, msgOut.Body, msg.Body)
	assert.Equal(t, msgOut.Attempts, uint16(1))
	msgOut = <-msgChan
	assert.Equal(t, msgOut.Id, msg.Id)
	assert.Equal(t, msgOut.Body, msg.Body)
	assert.Equal(t, msgOut.Attempts, uint16(1))
}

开发者ID:datastream，项目名称:nsq，代码行数:45，代码来源:protocol_v2_test.go

示例15: TestBasicLookupd

func TestBasicLookupd(t *testing.T) {
	log.SetOutput(ioutil.Discard)
	defer log.SetOutput(os.Stdout)

	tcpAddr, httpAddr := mustStartLookupd()
	defer lookupd.Exit()

	topics := lookupd.DB.FindRegistrations("topic", "*", "*")
	assert.Equal(t, len(topics), 0)

	topicName := "connectmsg"

	conn := mustConnectLookupd(t, tcpAddr)
	tcpPort := 5000
	httpPort := 5555
	identify(t, conn, "ip.address", tcpPort, httpPort, "fake-version")

	nsq.Register(topicName, "channel1").Write(conn)
	v, err := nsq.ReadResponse(conn)
	assert.Equal(t, err, nil)
	assert.Equal(t, v, []byte("OK"))

	endpoint := fmt.Sprintf("http://%s/nodes", httpAddr)
	data, err := nsq.ApiRequest(endpoint)
	log.Printf("got %v", data)
	returnedProducers, err := data.Get("producers").Array()
	assert.Equal(t, err, nil)
	assert.Equal(t, len(returnedProducers), 1)

	topics = lookupd.DB.FindRegistrations("topic", topicName, "")
	assert.Equal(t, len(topics), 1)

	producers := lookupd.DB.FindProducers("topic", topicName, "")
	assert.Equal(t, len(producers), 1)
	producer := producers[0]

	assert.Equal(t, producer.peerInfo.Address, "ip.address") //TODO: remove for 1.0
	assert.Equal(t, producer.peerInfo.BroadcastAddress, "ip.address")
	assert.Equal(t, producer.peerInfo.Hostname, "ip.address")
	assert.Equal(t, producer.peerInfo.TcpPort, tcpPort)
	assert.Equal(t, producer.peerInfo.HttpPort, httpPort)

	endpoint = fmt.Sprintf("http://%s/topics", httpAddr)
	data, err = nsq.ApiRequest(endpoint)
	assert.Equal(t, err, nil)
	returnedTopics, err := data.Get("topics").Array()
	log.Printf("got returnedTopics %v", returnedTopics)
	assert.Equal(t, err, nil)
	assert.Equal(t, len(returnedTopics), 1)

	endpoint = fmt.Sprintf("http://%s/lookup?topic=%s", httpAddr, topicName)
	data, err = nsq.ApiRequest(endpoint)
	assert.Equal(t, err, nil)
	returnedChannels, err := data.Get("channels").Array()
	assert.Equal(t, err, nil)
	assert.Equal(t, len(returnedChannels), 1)

	returnedProducers, err = data.Get("producers").Array()
	log.Printf("got returnedProducers %v", returnedProducers)
	assert.Equal(t, err, nil)
	assert.Equal(t, len(returnedProducers), 1)
	for i := range returnedProducers {
		producer := data.Get("producers").GetIndex(i)
		log.Printf("producer %v", producer)
		assert.Equal(t, err, nil)
		port, err := producer.Get("tcp_port").Int()
		assert.Equal(t, err, nil)
		assert.Equal(t, port, tcpPort)
		port, err = producer.Get("http_port").Int()
		assert.Equal(t, err, nil)
		assert.Equal(t, port, httpPort)
		address, err := producer.Get("address").String() //TODO: remove for 1.0
		broadcastaddress, err := producer.Get("broadcast_address").String()

		assert.Equal(t, err, nil)
		assert.Equal(t, address, "ip.address")
		assert.Equal(t, broadcastaddress, "ip.address")
		ver, err := producer.Get("version").String()
		assert.Equal(t, err, nil)
		assert.Equal(t, ver, "fake-version")
	}

	conn.Close()
	time.Sleep(10 * time.Millisecond)

	// now there should be no producers, but still topic/channel entries
	data, err = nsq.ApiRequest(endpoint)
	assert.Equal(t, err, nil)
	returnedChannels, err = data.Get("channels").Array()
	assert.Equal(t, err, nil)
	assert.Equal(t, len(returnedChannels), 1)
	returnedProducers, err = data.Get("producers").Array()
	assert.Equal(t, err, nil)
	assert.Equal(t, len(returnedProducers), 0)
}

开发者ID:datastream，项目名称:nsq，代码行数:95，代码来源:nsqlookupd_test.go

示例16: TestClientTimeout

func TestClientTimeout(t *testing.T) {
	log.SetOutput(ioutil.Discard)
	defer log.SetOutput(os.Stdout)

	topicName := "test_client_timeout_v2" + strconv.Itoa(int(time.Now().Unix()))

	options := NewNsqdOptions()
	options.clientTimeout = 50 * time.Millisecond
	tcpAddr, _ := mustStartNSQd(options)
	defer nsqd.Exit()

	conn, err := mustConnectNSQd(tcpAddr)
	assert.Equal(t, err, nil)

	identify(t, conn)
	sub(t, conn, topicName, "ch")

	time.Sleep(50 * time.Millisecond)

	// depending on timing there may be 1 or 2 hearbeats sent
	// just read until we get an error
	timer := time.After(100 * time.Millisecond)
	for {
		select {
		case <-timer:
			t.Fatalf("test timed out")
		default:
			_, err := nsq.ReadResponse(conn)
			if err != nil {
				goto done
			}
		}
	}
done:
}

func TestClientHeartbeat(t *testing.T) {
	log.SetOutput(ioutil.Discard)
	defer log.SetOutput(os.Stdout)

	topicName := "test_hb_v2" + strconv.Itoa(int(time.Now().Unix()))

	options := NewNsqdOptions()
	options.clientTimeout = 100 * time.Millisecond
	tcpAddr, _ := mustStartNSQd(options)
	defer nsqd.Exit()

	conn, err := mustConnectNSQd(tcpAddr)
	assert.Equal(t, err, nil)

	identify(t, conn)
	sub(t, conn, topicName, "ch")

	err = nsq.Ready(1).Write(conn)
	assert.Equal(t, err, nil)

	resp, _ := nsq.ReadResponse(conn)
	_, data, _ := nsq.UnpackResponse(resp)
	assert.Equal(t, data, []byte("_heartbeat_"))

	time.Sleep(10 * time.Millisecond)

	err = nsq.Nop().Write(conn)
	assert.Equal(t, err, nil)

	// wait long enough that would have timed out (had we not sent the above cmd)
	time.Sleep(50 * time.Millisecond)

	err = nsq.Nop().Write(conn)
	assert.Equal(t, err, nil)
}

func TestClientHeartbeatDisableSUB(t *testing.T) {
	log.SetOutput(ioutil.Discard)
	defer log.SetOutput(os.Stdout)

	topicName := "test_hb_v2" + strconv.Itoa(int(time.Now().Unix()))

	options := NewNsqdOptions()
	options.clientTimeout = 200 * time.Millisecond
	tcpAddr, _ := mustStartNSQd(options)
	defer nsqd.Exit()

	conn, err := mustConnectNSQd(tcpAddr)
	assert.Equal(t, err, nil)

	identifyHeartbeatInterval(t, conn, -1, nsq.FrameTypeResponse, "OK")
	subFail(t, conn, topicName, "ch")
}

func TestClientHeartbeatDisable(t *testing.T) {
	log.SetOutput(ioutil.Discard)
	defer log.SetOutput(os.Stdout)

	options := NewNsqdOptions()
	options.clientTimeout = 100 * time.Millisecond
	tcpAddr, _ := mustStartNSQd(options)
	defer nsqd.Exit()

	conn, err := mustConnectNSQd(tcpAddr)
//.........这里部分代码省略.........

开发者ID:datastream，项目名称:nsq，代码行数:101，代码来源:protocol_v2_test.go

注：本文中的github.com/bitly/nsq/nsq.ReadResponse函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。