// TempLayerArchive creates a temporary archive of the given image's filesystem layer.
//   The archive is stored on disk and will be automatically deleted as soon as has been read.
//   If output is not nil, a human-readable progress bar will be written to it.
func (graph *Graph) TempLayerArchive(id string, sf *streamformatter.StreamFormatter, output io.Writer) (*archive.TempArchive, error) {
	image, err := graph.Get(id)
	if err != nil {
		return nil, err
	}
	tmp, err := graph.mktemp()
	if err != nil {
		return nil, err
	}
	defer os.RemoveAll(tmp)
	a, err := graph.TarLayer(image)
	if err != nil {
		return nil, err
	}
	progressReader := progressreader.New(progressreader.Config{
		In:        a,
		Out:       output,
		Formatter: sf,
		Size:      0,
		NewLines:  false,
		ID:        stringid.TruncateID(id),
		Action:    "Buffering to disk",
	})
	defer progressReader.Close()
	return archive.NewTempArchive(progressReader, tmp)
}

func (p *v1Pusher) pushImage(imgID, ep string) (checksum string, err error) {
	jsonRaw, err := p.getV1Config(imgID)
	if err != nil {
		return "", fmt.Errorf("Cannot retrieve the path for {%s}: %s", imgID, err)
	}
	p.out.Write(p.sf.FormatProgress(stringid.TruncateID(imgID), "Pushing", nil))

	compatibilityID, err := p.getV1ID(imgID)
	if err != nil {
		return "", err
	}

	// General rule is to use ID for graph accesses and compatibilityID for
	// calls to session.registry()
	imgData := &registry.ImgData{
		ID: compatibilityID,
	}

	// Send the json
	if err := p.session.PushImageJSONRegistry(imgData, jsonRaw, ep); err != nil {
		if err == registry.ErrAlreadyExists {
			p.out.Write(p.sf.FormatProgress(stringid.TruncateID(imgID), "Image already pushed, skipping", nil))
			return "", nil
		}
		return "", err
	}

	layerData, err := p.graph.TempLayerArchive(imgID, p.sf, p.out)
	if err != nil {
		return "", fmt.Errorf("Failed to generate layer archive: %s", err)
	}
	defer os.RemoveAll(layerData.Name())

	// Send the layer
	logrus.Debugf("rendered layer for %s of [%d] size", imgID, layerData.Size)

	checksum, checksumPayload, err := p.session.PushImageLayerRegistry(imgData.ID,
		progressreader.New(progressreader.Config{
			In:        layerData,
			Out:       p.out,
			Formatter: p.sf,
			Size:      layerData.Size,
			NewLines:  false,
			ID:        stringid.TruncateID(imgID),
			Action:    "Pushing",
		}), ep, jsonRaw)
	if err != nil {
		return "", err
	}
	imgData.Checksum = checksum
	imgData.ChecksumPayload = checksumPayload
	// Send the checksum
	if err := p.session.PushImageChecksumRegistry(imgData, ep); err != nil {
		return "", err
	}

	p.out.Write(p.sf.FormatProgress(stringid.TruncateID(imgID), "Image successfully pushed", nil))
	return imgData.Checksum, nil
}

// Import imports an image, getting the archived layer data either from
// inConfig (if src is "-"), or from a URI specified in src. Progress output is
// written to outStream. Repository and tag names can optionally be given in
// the repo and tag arguments, respectively.
func (s *TagStore) Import(src string, repo string, tag string, inConfig io.ReadCloser, outStream io.Writer, containerConfig *runconfig.Config) error {
	var (
		sf      = streamformatter.NewJSONStreamFormatter()
		archive io.ReadCloser
		resp    *http.Response
	)

	if src == "-" {
		archive = inConfig
	} else {
		inConfig.Close()
		u, err := url.Parse(src)
		if err != nil {
			return err
		}
		if u.Scheme == "" {
			u.Scheme = "http"
			u.Host = src
			u.Path = ""
		}
		outStream.Write(sf.FormatStatus("", "Downloading from %s", u))
		resp, err = httputils.Download(u.String())
		if err != nil {
			return err
		}
		progressReader := progressreader.New(progressreader.Config{
			In:        resp.Body,
			Out:       outStream,
			Formatter: sf,
			Size:      resp.ContentLength,
			NewLines:  true,
			ID:        "",
			Action:    "Importing",
		})
		archive = progressReader
	}

	defer archive.Close()
	img, err := s.graph.Create(archive, "", "", "Imported from "+src, "", nil, containerConfig)
	if err != nil {
		return err
	}
	// Optionally register the image at REPO/TAG
	if repo != "" {
		if err := s.Tag(repo, tag, img.ID, true); err != nil {
			return err
		}
	}
	outStream.Write(sf.FormatStatus("", img.ID))
	logID := img.ID
	if tag != "" {
		logID = utils.ImageReference(logID, tag)
	}

	s.eventsService.Log("import", logID, "")
	return nil
}

func (p *v2Pusher) pushV2Image(bs distribution.BlobService, img *image.Image) (digest.Digest, error) {
	out := p.config.OutStream

	out.Write(p.sf.FormatProgress(stringid.TruncateID(img.ID), "Preparing", nil))

	image, err := p.graph.Get(img.ID)
	if err != nil {
		return "", err
	}
	arch, err := p.graph.TarLayer(image)
	if err != nil {
		return "", err
	}
	defer arch.Close()

	// Send the layer
	layerUpload, err := bs.Create(context.Background())
	if err != nil {
		return "", err
	}
	defer layerUpload.Close()

	digester := digest.Canonical.New()
	tee := io.TeeReader(arch, digester.Hash())

	reader := progressreader.New(progressreader.Config{
		In:        ioutil.NopCloser(tee), // we'll take care of close here.
		Out:       out,
		Formatter: p.sf,

		// TODO(stevvooe): This may cause a size reporting error. Try to get
		// this from tar-split or elsewhere. The main issue here is that we
		// don't want to buffer to disk *just* to calculate the size.
		Size: img.Size,

		NewLines: false,
		ID:       stringid.TruncateID(img.ID),
		Action:   "Pushing",
	})

	out.Write(p.sf.FormatProgress(stringid.TruncateID(img.ID), "Pushing", nil))
	nn, err := io.Copy(layerUpload, reader)
	if err != nil {
		return "", err
	}

	dgst := digester.Digest()
	if _, err := layerUpload.Commit(context.Background(), distribution.Descriptor{Digest: dgst}); err != nil {
		return "", err
	}

	logrus.Debugf("uploaded layer %s (%s), %d bytes", img.ID, dgst, nn)
	out.Write(p.sf.FormatProgress(stringid.TruncateID(img.ID), "Pushed", nil))

	return dgst, nil
}

func (p *v2Puller) download(di *downloadInfo) {
	logrus.Debugf("pulling blob %q", di.digest)

	blobs := p.repo.Blobs(context.Background())

	desc, err := blobs.Stat(context.Background(), di.digest)
	if err != nil {
		logrus.Debugf("Error statting layer: %v", err)
		di.err <- err
		return
	}
	di.size = desc.Size

	layerDownload, err := blobs.Open(context.Background(), di.digest)
	if err != nil {
		logrus.Debugf("Error fetching layer: %v", err)
		di.err <- err
		return
	}
	defer layerDownload.Close()

	verifier, err := digest.NewDigestVerifier(di.digest)
	if err != nil {
		di.err <- err
		return
	}

	digestStr := di.digest.String()

	reader := progressreader.New(progressreader.Config{
		In:        ioutil.NopCloser(io.TeeReader(layerDownload, verifier)),
		Out:       di.broadcaster,
		Formatter: p.sf,
		Size:      di.size,
		NewLines:  false,
		ID:        stringid.TruncateID(digestStr),
		Action:    "Downloading",
	})
	io.Copy(di.tmpFile, reader)

	di.broadcaster.Write(p.sf.FormatProgress(stringid.TruncateID(digestStr), "Verifying Checksum", nil))

	if !verifier.Verified() {
		err = fmt.Errorf("filesystem layer verification failed for digest %s", di.digest)
		logrus.Error(err)
		di.err <- err
		return
	}

	di.broadcaster.Write(p.sf.FormatProgress(stringid.TruncateID(digestStr), "Download complete", nil))

	logrus.Debugf("Downloaded %s to tempfile %s", digestStr, di.tmpFile.Name())
	di.layer = layerDownload

	di.err <- nil
}

func (s *TagStore) pushImage(r *registry.Session, out io.Writer, imgID, ep string, token []string, sf *utils.StreamFormatter) (checksum string, err error) {
	out = utils.NewWriteFlusher(out)
	jsonRaw, err := ioutil.ReadFile(path.Join(s.graph.Root, imgID, "json"))
	if err != nil {
		return "", fmt.Errorf("Cannot retrieve the path for {%s}: %s", imgID, err)
	}
	out.Write(sf.FormatProgress(common.TruncateID(imgID), "Pushing", nil))

	imgData := &registry.ImgData{
		ID: imgID,
	}

	// Send the json
	if err := r.PushImageJSONRegistry(imgData, jsonRaw, ep, token); err != nil {
		if err == registry.ErrAlreadyExists {
			out.Write(sf.FormatProgress(common.TruncateID(imgData.ID), "Image already pushed, skipping", nil))
			return "", nil
		}
		return "", err
	}

	layerData, err := s.graph.TempLayerArchive(imgID, sf, out)
	if err != nil {
		return "", fmt.Errorf("Failed to generate layer archive: %s", err)
	}
	defer os.RemoveAll(layerData.Name())

	// Send the layer
	log.Debugf("rendered layer for %s of [%d] size", imgData.ID, layerData.Size)

	checksum, checksumPayload, err := r.PushImageLayerRegistry(imgData.ID,
		progressreader.New(progressreader.Config{
			In:        layerData,
			Out:       out,
			Formatter: sf,
			Size:      int(layerData.Size),
			NewLines:  false,
			ID:        common.TruncateID(imgData.ID),
			Action:    "Pushing",
		}), ep, token, jsonRaw)
	if err != nil {
		return "", err
	}
	imgData.Checksum = checksum
	imgData.ChecksumPayload = checksumPayload
	// Send the checksum
	if err := r.PushImageChecksumRegistry(imgData, ep, token); err != nil {
		return "", err
	}

	out.Write(sf.FormatProgress(common.TruncateID(imgData.ID), "Image successfully pushed", nil))
	return imgData.Checksum, nil
}

func (p *v2Pusher) pushV2Layer(bs distribution.BlobService, l layer.Layer) (digest.Digest, error) {
	out := p.config.OutStream
	displayID := stringid.TruncateID(string(l.DiffID()))

	out.Write(p.sf.FormatProgress(displayID, "Preparing", nil))

	arch, err := l.TarStream()
	if err != nil {
		return "", err
	}

	// Send the layer
	layerUpload, err := bs.Create(context.Background())
	if err != nil {
		return "", err
	}
	defer layerUpload.Close()

	// don't care if this fails; best effort
	size, _ := l.DiffSize()

	reader := progressreader.New(progressreader.Config{
		In:        ioutil.NopCloser(arch), // we'll take care of close here.
		Out:       out,
		Formatter: p.sf,
		Size:      size,
		NewLines:  false,
		ID:        displayID,
		Action:    "Pushing",
	})

	compressedReader := compress(reader)

	digester := digest.Canonical.New()
	tee := io.TeeReader(compressedReader, digester.Hash())

	out.Write(p.sf.FormatProgress(displayID, "Pushing", nil))
	nn, err := layerUpload.ReadFrom(tee)
	compressedReader.Close()
	if err != nil {
		return "", err
	}

	dgst := digester.Digest()
	if _, err := layerUpload.Commit(context.Background(), distribution.Descriptor{Digest: dgst}); err != nil {
		return "", err
	}

	logrus.Debugf("uploaded layer %s (%s), %d bytes", l.DiffID(), dgst, nn)
	out.Write(p.sf.FormatProgress(displayID, "Pushed", nil))

	return dgst, nil
}

// PushV2Image pushes the image content to the v2 registry, first buffering the contents to disk
func (s *TagStore) pushV2Image(r *registry.Session, img *image.Image, endpoint *registry.Endpoint, imageName string, sf *utils.StreamFormatter, out io.Writer, auth *registry.RequestAuthorization) (string, error) {
	out.Write(sf.FormatProgress(common.TruncateID(img.ID), "Buffering to Disk", nil))

	image, err := s.graph.Get(img.ID)
	if err != nil {
		return "", err
	}
	arch, err := image.TarLayer()
	if err != nil {
		return "", err
	}
	defer arch.Close()

	tf, err := s.graph.newTempFile()
	if err != nil {
		return "", err
	}
	defer func() {
		tf.Close()
		os.Remove(tf.Name())
	}()

	h := sha256.New()
	size, err := bufferToFile(tf, io.TeeReader(arch, h))
	if err != nil {
		return "", err
	}
	dgst := digest.NewDigest("sha256", h)

	// Send the layer
	log.Debugf("rendered layer for %s of [%d] size", img.ID, size)

	if err := r.PutV2ImageBlob(endpoint, imageName, dgst.Algorithm(), dgst.Hex(),
		progressreader.New(progressreader.Config{
			In:        tf,
			Out:       out,
			Formatter: sf,
			Size:      int(size),
			NewLines:  false,
			ID:        common.TruncateID(img.ID),
			Action:    "Pushing",
		}), auth); err != nil {
		out.Write(sf.FormatProgress(common.TruncateID(img.ID), "Image push failed", nil))
		return "", err
	}
	out.Write(sf.FormatProgress(common.TruncateID(img.ID), "Image successfully pushed", nil))
	return dgst.String(), nil
}

func (p *v2Puller) download(di *downloadInfo) {
	logrus.Debugf("pulling blob %q to %s", di.digest, di.img.ID)

	out := di.out

	broadcaster, found := p.poolAdd("pull", "img:"+di.img.ID)
	if found {
		broadcaster.Add(out)
		broadcaster.Wait()
		out.Write(p.sf.FormatProgress(stringid.TruncateID(di.img.ID), "Download complete", nil))
		di.err <- nil
		return
	}

	broadcaster.Add(out)
	defer p.poolRemove("pull", "img:"+di.img.ID)
	tmpFile, err := ioutil.TempFile("", "GetImageBlob")
	if err != nil {
		di.err <- err
		return
	}
	di.tmpFile = tmpFile

	blobs := p.repo.Blobs(context.Background())

	desc, err := blobs.Stat(context.Background(), di.digest)
	if err != nil {
		logrus.Debugf("Error statting layer: %v", err)
		di.err <- err
		return
	}
	di.size = desc.Size

	layerDownload, err := blobs.Open(context.Background(), di.digest)
	if err != nil {
		logrus.Debugf("Error fetching layer: %v", err)
		di.err <- err
		return
	}
	defer layerDownload.Close()

	verifier, err := digest.NewDigestVerifier(di.digest)
	if err != nil {
		di.err <- err
		return
	}

	reader := progressreader.New(progressreader.Config{
		In:        ioutil.NopCloser(io.TeeReader(layerDownload, verifier)),
		Out:       broadcaster,
		Formatter: p.sf,
		Size:      di.size,
		NewLines:  false,
		ID:        stringid.TruncateID(di.img.ID),
		Action:    "Downloading",
	})
	io.Copy(tmpFile, reader)

	broadcaster.Write(p.sf.FormatProgress(stringid.TruncateID(di.img.ID), "Verifying Checksum", nil))

	if !verifier.Verified() {
		err = fmt.Errorf("filesystem layer verification failed for digest %s", di.digest)
		logrus.Error(err)
		di.err <- err
		return
	}

	broadcaster.Write(p.sf.FormatProgress(stringid.TruncateID(di.img.ID), "Download complete", nil))

	logrus.Debugf("Downloaded %s to tempfile %s", di.img.ID, tmpFile.Name())
	di.layer = layerDownload

	di.err <- nil
}

// Build is the main interface of the package, it gathers the Builder
// struct and calls builder.Run() to do all the real build job.
func Build(d *daemon.Daemon, buildConfig *Config) error {
	var (
		repoName string
		tag      string
		context  io.ReadCloser
	)
	sf := streamformatter.NewJSONStreamFormatter()

	repoName, tag = parsers.ParseRepositoryTag(buildConfig.RepoName)
	if repoName != "" {
		if err := registry.ValidateRepositoryName(repoName); err != nil {
			return err
		}
		if len(tag) > 0 {
			if err := tags.ValidateTagName(tag); err != nil {
				return err
			}
		}
	}

	if buildConfig.RemoteURL == "" {
		context = ioutil.NopCloser(buildConfig.Context)
	} else if urlutil.IsGitURL(buildConfig.RemoteURL) {
		root, err := utils.GitClone(buildConfig.RemoteURL)
		if err != nil {
			return err
		}
		defer os.RemoveAll(root)

		c, err := archive.Tar(root, archive.Uncompressed)
		if err != nil {
			return err
		}
		context = c
	} else if urlutil.IsURL(buildConfig.RemoteURL) {
		f, err := httputils.Download(buildConfig.RemoteURL)
		if err != nil {
			return fmt.Errorf("Error downloading remote context %s: %v", buildConfig.RemoteURL, err)
		}
		defer f.Body.Close()
		ct := f.Header.Get("Content-Type")
		clen := int(f.ContentLength)
		contentType, bodyReader, err := inspectResponse(ct, f.Body, clen)

		defer bodyReader.Close()

		if err != nil {
			return fmt.Errorf("Error detecting content type for remote %s: %v", buildConfig.RemoteURL, err)
		}
		if contentType == httputils.MimeTypes.TextPlain {
			dockerFile, err := ioutil.ReadAll(bodyReader)
			if err != nil {
				return err
			}

			// When we're downloading just a Dockerfile put it in
			// the default name - don't allow the client to move/specify it
			buildConfig.DockerfileName = api.DefaultDockerfileName

			c, err := archive.Generate(buildConfig.DockerfileName, string(dockerFile))
			if err != nil {
				return err
			}
			context = c
		} else {
			// Pass through - this is a pre-packaged context, presumably
			// with a Dockerfile with the right name inside it.
			prCfg := progressreader.Config{
				In:        bodyReader,
				Out:       buildConfig.Stdout,
				Formatter: sf,
				Size:      clen,
				NewLines:  true,
				ID:        "Downloading context",
				Action:    buildConfig.RemoteURL,
			}
			context = progressreader.New(prCfg)
		}
	}

	defer context.Close()

	builder := &builder{
		Daemon: d,
		OutStream: &streamformatter.StdoutFormater{
			Writer:          buildConfig.Stdout,
			StreamFormatter: sf,
		},
		ErrStream: &streamformatter.StderrFormater{
			Writer:          buildConfig.Stdout,
			StreamFormatter: sf,
		},
		Verbose:         !buildConfig.SuppressOutput,
		UtilizeCache:    !buildConfig.NoCache,
		Remove:          buildConfig.Remove,
		ForceRemove:     buildConfig.ForceRemove,
		Pull:            buildConfig.Pull,
		OutOld:          buildConfig.Stdout,
//.........这里部分代码省略.........

//.........这里部分代码省略.........
			return false, err
		}
		d.tmpFile = tmpFile

		downloads = append(downloads, d)

		broadcaster, found := p.poolAdd("pull", d.poolKey)
		broadcaster.Add(out)
		d.broadcaster = broadcaster
		if found {
			d.err <- nil
		} else {
			go p.download(d)
		}
	}

	for _, d := range downloads {
		if err := <-d.err; err != nil {
			return false, err
		}

		if d.layer == nil {
			// Wait for a different pull to download and extract
			// this layer.
			err = d.broadcaster.Wait()
			if err != nil {
				return false, err
			}
			continue
		}

		d.tmpFile.Seek(0, 0)
		err := func() error {
			reader := progressreader.New(progressreader.Config{
				In:        d.tmpFile,
				Out:       d.broadcaster,
				Formatter: p.sf,
				Size:      d.size,
				NewLines:  false,
				ID:        stringid.TruncateID(d.img.id),
				Action:    "Extracting",
			})

			p.graph.imagesMutex.Lock()
			defer p.graph.imagesMutex.Unlock()

			p.graph.imageMutex.Lock(d.img.id)
			defer p.graph.imageMutex.Unlock(d.img.id)

			// Must recheck the data on disk if any exists.
			// This protects against races where something
			// else is written to the graph under this ID
			// after attemptIDReuse.
			if p.graph.Exists(d.img.id) {
				if err := p.validateImageInGraph(d.img.id, imgs, d.imgIndex); err != nil {
					return fmt.Errorf("image validation failed: %v", err)
				}
			}

			if err := p.graph.register(d.img, reader); err != nil {
				return err
			}

			if err := p.graph.setLayerDigest(d.img.id, d.digest); err != nil {
				return err
			}

func (p *v2Puller) pullV2Tag(tag, taggedName string) (verified bool, err error) {
	logrus.Debugf("Pulling tag from V2 registry: %q", tag)
	out := p.config.OutStream

	manSvc, err := p.repo.Manifests(context.Background())
	if err != nil {
		return false, err
	}

	manifest, err := manSvc.GetByTag(tag)
	if err != nil {
		return false, err
	}
	verified, err = p.validateManifest(manifest, tag)
	if err != nil {
		return false, err
	}
	if verified {
		logrus.Printf("Image manifest for %s has been verified", taggedName)
	}

	// By using a pipeWriter for each of the downloads to write their progress
	// to, we can avoid an issue where this function returns an error but
	// leaves behind running download goroutines. By splitting the writer
	// with a pipe, we can close the pipe if there is any error, consequently
	// causing each download to cancel due to an error writing to this pipe.
	pipeReader, pipeWriter := io.Pipe()
	go func() {
		if _, err := io.Copy(out, pipeReader); err != nil {
			logrus.Errorf("error copying from layer download progress reader: %s", err)
		}
	}()
	defer func() {
		if err != nil {
			// All operations on the pipe are synchronous. This call will wait
			// until all current readers/writers are done using the pipe then
			// set the error. All successive reads/writes will return with this
			// error.
			pipeWriter.CloseWithError(errors.New("download canceled"))
		}
	}()

	out.Write(p.sf.FormatStatus(tag, "Pulling from %s", p.repo.Name()))

	var downloads []*downloadInfo

	var layerIDs []string
	defer func() {
		p.graph.Release(p.sessionID, layerIDs...)
	}()

	for i := len(manifest.FSLayers) - 1; i >= 0; i-- {
		img, err := image.NewImgJSON([]byte(manifest.History[i].V1Compatibility))
		if err != nil {
			logrus.Debugf("error getting image v1 json: %v", err)
			return false, err
		}
		p.graph.Retain(p.sessionID, img.ID)
		layerIDs = append(layerIDs, img.ID)

		// Check if exists
		if p.graph.Exists(img.ID) {
			logrus.Debugf("Image already exists: %s", img.ID)
			out.Write(p.sf.FormatProgress(stringid.TruncateID(img.ID), "Already exists", nil))
			continue
		}
		out.Write(p.sf.FormatProgress(stringid.TruncateID(img.ID), "Pulling fs layer", nil))

		d := &downloadInfo{
			img:    img,
			digest: manifest.FSLayers[i].BlobSum,
			// TODO: seems like this chan buffer solved hanging problem in go1.5,
			// this can indicate some deeper problem that somehow we never take
			// error from channel in loop below
			err: make(chan error, 1),
			out: pipeWriter,
		}
		downloads = append(downloads, d)

		go p.download(d)
	}

	// run clean for all downloads to prevent leftovers
	for _, d := range downloads {
		defer func(d *downloadInfo) {
			if d.tmpFile != nil {
				d.tmpFile.Close()
				if err := os.RemoveAll(d.tmpFile.Name()); err != nil {
					logrus.Errorf("Failed to remove temp file: %s", d.tmpFile.Name())
				}
			}
		}(d)
	}

	var tagUpdated bool
	for _, d := range downloads {
		if err := <-d.err; err != nil {
			return false, err
		}
		if d.layer == nil {
//.........这里部分代码省略.........

func (p *v2Pusher) pushV2Image(bs distribution.BlobService, img *image.Image) (digest.Digest, error) {
	out := p.config.OutStream

	out.Write(p.sf.FormatProgress(stringid.TruncateID(img.ID), "Preparing", nil))

	image, err := p.graph.Get(img.ID)
	if err != nil {
		return "", err
	}
	arch, err := p.graph.TarLayer(image)
	if err != nil {
		return "", err
	}
	defer arch.Close()

	// Send the layer
	layerUpload, err := bs.Create(context.Background())
	if err != nil {
		return "", err
	}
	defer layerUpload.Close()

	reader := progressreader.New(progressreader.Config{
		In:        ioutil.NopCloser(arch), // we'll take care of close here.
		Out:       out,
		Formatter: p.sf,

		// TODO(stevvooe): This may cause a size reporting error. Try to get
		// this from tar-split or elsewhere. The main issue here is that we
		// don't want to buffer to disk *just* to calculate the size.
		Size: img.Size,

		NewLines: false,
		ID:       stringid.TruncateID(img.ID),
		Action:   "Pushing",
	})

	digester := digest.Canonical.New()
	// HACK: The MultiWriter doesn't write directly to layerUpload because
	// we must make sure the ReadFrom is used, not Write. Using Write would
	// send a PATCH request for every Write call.
	pipeReader, pipeWriter := io.Pipe()
	// Use a bufio.Writer to avoid excessive chunking in HTTP request.
	bufWriter := bufio.NewWriterSize(io.MultiWriter(pipeWriter, digester.Hash()), compressionBufSize)
	compressor := gzip.NewWriter(bufWriter)

	go func() {
		_, err := io.Copy(compressor, reader)
		if err == nil {
			err = compressor.Close()
		}
		if err == nil {
			err = bufWriter.Flush()
		}
		if err != nil {
			pipeWriter.CloseWithError(err)
		} else {
			pipeWriter.Close()
		}
	}()

	out.Write(p.sf.FormatProgress(stringid.TruncateID(img.ID), "Pushing", nil))
	nn, err := layerUpload.ReadFrom(pipeReader)
	pipeReader.Close()
	if err != nil {
		return "", err
	}

	dgst := digester.Digest()
	if _, err := layerUpload.Commit(context.Background(), distribution.Descriptor{Digest: dgst}); err != nil {
		return "", err
	}

	logrus.Debugf("uploaded layer %s (%s), %d bytes", img.ID, dgst, nn)
	out.Write(p.sf.FormatProgress(stringid.TruncateID(img.ID), "Pushed", nil))

	return dgst, nil
}

// CmdBuild builds a new image from the source code at a given path.
//
// If '-' is provided instead of a path or URL, Docker will build an image from either a Dockerfile or tar archive read from STDIN.
//
// Usage: docker build [OPTIONS] PATH | URL | -
func (cli *DockerCli) CmdBuild(args ...string) error {
	cmd := cli.Subcmd("build", "PATH | URL | -", "Build a new image from the source code at PATH", true)
	tag := cmd.String([]string{"t", "-tag"}, "", "Repository name (and optionally a tag) for the image")
	suppressOutput := cmd.Bool([]string{"q", "-quiet"}, false, "Suppress the verbose output generated by the containers")
	noCache := cmd.Bool([]string{"#no-cache", "-no-cache"}, false, "Do not use cache when building the image")
	rm := cmd.Bool([]string{"#rm", "-rm"}, true, "Remove intermediate containers after a successful build")
	forceRm := cmd.Bool([]string{"-force-rm"}, false, "Always remove intermediate containers")
	pull := cmd.Bool([]string{"-pull"}, false, "Always attempt to pull a newer version of the image")
	dockerfileName := cmd.String([]string{"f", "-file"}, "", "Name of the Dockerfile (Default is 'PATH/Dockerfile')")
	flMemoryString := cmd.String([]string{"m", "-memory"}, "", "Memory limit")
	flMemorySwap := cmd.String([]string{"-memory-swap"}, "", "Total memory (memory + swap), '-1' to disable swap")
	flCPUShares := cmd.Int64([]string{"c", "-cpu-shares"}, 0, "CPU shares (relative weight)")
	flCpuQuota := cmd.Int64([]string{"-cpu-quota"}, 0, "Limit the CPU CFS (Completely Fair Scheduler) quota")
	flCPUSetCpus := cmd.String([]string{"-cpuset-cpus"}, "", "CPUs in which to allow execution (0-3, 0,1)")
	flCPUSetMems := cmd.String([]string{"-cpuset-mems"}, "", "MEMs in which to allow execution (0-3, 0,1)")
	flCgroupParent := cmd.String([]string{"-cgroup-parent"}, "", "Optional parent cgroup for the container")

	cmd.Require(flag.Exact, 1)
	cmd.ParseFlags(args, true)

	var (
		context  archive.Archive
		isRemote bool
		err      error
	)

	_, err = exec.LookPath("git")
	hasGit := err == nil
	if cmd.Arg(0) == "-" {
		// As a special case, 'docker build -' will build from either an empty context with the
		// contents of stdin as a Dockerfile, or a tar-ed context from stdin.
		buf := bufio.NewReader(cli.in)
		magic, err := buf.Peek(tarHeaderSize)
		if err != nil && err != io.EOF {
			return fmt.Errorf("failed to peek context header from STDIN: %v", err)
		}
		if !archive.IsArchive(magic) {
			dockerfile, err := ioutil.ReadAll(buf)
			if err != nil {
				return fmt.Errorf("failed to read Dockerfile from STDIN: %v", err)
			}

			// -f option has no meaning when we're reading it from stdin,
			// so just use our default Dockerfile name
			*dockerfileName = api.DefaultDockerfileName
			context, err = archive.Generate(*dockerfileName, string(dockerfile))
		} else {
			context = ioutil.NopCloser(buf)
		}
	} else if urlutil.IsURL(cmd.Arg(0)) && (!urlutil.IsGitURL(cmd.Arg(0)) || !hasGit) {
		isRemote = true
	} else {
		root := cmd.Arg(0)
		if urlutil.IsGitURL(root) {
			root, err = utils.GitClone(root)
			if err != nil {
				return err
			}
			defer os.RemoveAll(root)
		}
		if _, err := os.Stat(root); err != nil {
			return err
		}

		absRoot, err := filepath.Abs(root)
		if err != nil {
			return err
		}

		filename := *dockerfileName // path to Dockerfile

		if *dockerfileName == "" {
			// No -f/--file was specified so use the default
			*dockerfileName = api.DefaultDockerfileName
			filename = filepath.Join(absRoot, *dockerfileName)

			// Just to be nice ;-) look for 'dockerfile' too but only
			// use it if we found it, otherwise ignore this check
			if _, err = os.Lstat(filename); os.IsNotExist(err) {
				tmpFN := path.Join(absRoot, strings.ToLower(*dockerfileName))
				if _, err = os.Lstat(tmpFN); err == nil {
					*dockerfileName = strings.ToLower(*dockerfileName)
					filename = tmpFN
				}
			}
		}

		origDockerfile := *dockerfileName // used for error msg
		if filename, err = filepath.Abs(filename); err != nil {
			return err
		}

		// Verify that 'filename' is within the build context
		filename, err = symlink.FollowSymlinkInScope(filename, absRoot)
		if err != nil {
//.........这里部分代码省略.........

func (p *v2Puller) download(di *downloadInfo) {
	logrus.Debugf("pulling blob %q to %s", di.digest, di.img.ID)

	out := p.config.OutStream

	if c, err := p.poolAdd("pull", "img:"+di.img.ID); err != nil {
		if c != nil {
			out.Write(p.sf.FormatProgress(stringid.TruncateID(di.img.ID), "Layer already being pulled by another client. Waiting.", nil))
			<-c
			out.Write(p.sf.FormatProgress(stringid.TruncateID(di.img.ID), "Download complete", nil))
		} else {
			logrus.Debugf("Image (id: %s) pull is already running, skipping: %v", di.img.ID, err)
		}
		di.err <- nil
		return
	}

	defer p.poolRemove("pull", "img:"+di.img.ID)
	tmpFile, err := ioutil.TempFile("", "GetImageBlob")
	if err != nil {
		di.err <- err
		return
	}

	blobs := p.repo.Blobs(nil)

	desc, err := blobs.Stat(nil, di.digest)
	if err != nil {
		logrus.Debugf("Error statting layer: %v", err)
		di.err <- err
		return
	}
	di.size = desc.Size

	layerDownload, err := blobs.Open(nil, di.digest)
	if err != nil {
		logrus.Debugf("Error fetching layer: %v", err)
		di.err <- err
		return
	}
	defer layerDownload.Close()

	verifier, err := digest.NewDigestVerifier(di.digest)
	if err != nil {
		di.err <- err
		return
	}

	reader := progressreader.New(progressreader.Config{
		In:        ioutil.NopCloser(io.TeeReader(layerDownload, verifier)),
		Out:       out,
		Formatter: p.sf,
		Size:      int(di.size),
		NewLines:  false,
		ID:        stringid.TruncateID(di.img.ID),
		Action:    "Downloading",
	})
	io.Copy(tmpFile, reader)

	out.Write(p.sf.FormatProgress(stringid.TruncateID(di.img.ID), "Verifying Checksum", nil))

	if !verifier.Verified() {
		err = fmt.Errorf("filesystem layer verification failed for digest %s", di.digest)
		logrus.Error(err)
		di.err <- err
		return
	}

	out.Write(p.sf.FormatProgress(stringid.TruncateID(di.img.ID), "Download complete", nil))

	logrus.Debugf("Downloaded %s to tempfile %s", di.img.ID, tmpFile.Name())
	di.tmpFile = tmpFile
	di.layer = layerDownload

	di.err <- nil
}

func (p *v2Puller) download(di *downloadInfo) {
	logrus.Debugf("pulling blob %q", di.digest)

	blobs := p.repo.Blobs(context.Background())

	layerDownload, err := blobs.Open(context.Background(), di.digest)
	if err != nil {
		logrus.Debugf("Error fetching layer: %v", err)
		di.err <- err
		return
	}
	defer layerDownload.Close()

	di.size, err = layerDownload.Seek(0, os.SEEK_END)
	if err != nil {
		// Seek failed, perhaps because there was no Content-Length
		// header. This shouldn't fail the download, because we can
		// still continue without a progress bar.
		di.size = 0
	} else {
		// Restore the seek offset at the beginning of the stream.
		_, err = layerDownload.Seek(0, os.SEEK_SET)
		if err != nil {
			di.err <- err
			return
		}
	}

	verifier, err := digest.NewDigestVerifier(di.digest)
	if err != nil {
		di.err <- err
		return
	}

	digestStr := di.digest.String()

	reader := progressreader.New(progressreader.Config{
		In:        ioutil.NopCloser(io.TeeReader(layerDownload, verifier)),
		Out:       di.broadcaster,
		Formatter: p.sf,
		Size:      di.size,
		NewLines:  false,
		ID:        stringid.TruncateID(digestStr),
		Action:    "Downloading",
	})
	io.Copy(di.tmpFile, reader)

	di.broadcaster.Write(p.sf.FormatProgress(stringid.TruncateID(digestStr), "Verifying Checksum", nil))

	if !verifier.Verified() {
		err = fmt.Errorf("filesystem layer verification failed for digest %s", di.digest)
		logrus.Error(err)
		di.err <- err
		return
	}

	di.broadcaster.Write(p.sf.FormatProgress(stringid.TruncateID(digestStr), "Download complete", nil))

	logrus.Debugf("Downloaded %s to tempfile %s", digestStr, di.tmpFile.Name())
	di.layer = layerDownload

	di.err <- nil
}

// CmdBuild builds a new image from the source code at a given path.
//
// If '-' is provided instead of a path or URL, Docker will build an image from either a Dockerfile or tar archive read from STDIN.
//
// Usage: docker build [OPTIONS] PATH | URL | -
func (cli *DockerCli) CmdBuild(args ...string) error {
	cmd := Cli.Subcmd("build", []string{"PATH | URL | -"}, Cli.DockerCommands["build"].Description, true)
	flTags := opts.NewListOpts(validateTag)
	cmd.Var(&flTags, []string{"t", "-tag"}, "Name and optionally a tag in the 'name:tag' format")
	suppressOutput := cmd.Bool([]string{"q", "-quiet"}, false, "Suppress the verbose output generated by the containers")
	noCache := cmd.Bool([]string{"#no-cache", "-no-cache"}, false, "Do not use cache when building the image")
	rm := cmd.Bool([]string{"#rm", "-rm"}, true, "Remove intermediate containers after a successful build")
	forceRm := cmd.Bool([]string{"-force-rm"}, false, "Always remove intermediate containers")
	pull := cmd.Bool([]string{"-pull"}, false, "Always attempt to pull a newer version of the image")
	dockerfileName := cmd.String([]string{"f", "-file"}, "", "Name of the Dockerfile (Default is 'PATH/Dockerfile')")
	flMemoryString := cmd.String([]string{"m", "-memory"}, "", "Memory limit")
	flMemorySwap := cmd.String([]string{"-memory-swap"}, "", "Total memory (memory + swap), '-1' to disable swap")
	flCPUShares := cmd.Int64([]string{"#c", "-cpu-shares"}, 0, "CPU shares (relative weight)")
	flCPUPeriod := cmd.Int64([]string{"-cpu-period"}, 0, "Limit the CPU CFS (Completely Fair Scheduler) period")
	flCPUQuota := cmd.Int64([]string{"-cpu-quota"}, 0, "Limit the CPU CFS (Completely Fair Scheduler) quota")
	flCPUSetCpus := cmd.String([]string{"-cpuset-cpus"}, "", "CPUs in which to allow execution (0-3, 0,1)")
	flCPUSetMems := cmd.String([]string{"-cpuset-mems"}, "", "MEMs in which to allow execution (0-3, 0,1)")
	flCgroupParent := cmd.String([]string{"-cgroup-parent"}, "", "Optional parent cgroup for the container")
	flBuildArg := opts.NewListOpts(opts.ValidateEnv)
	cmd.Var(&flBuildArg, []string{"-build-arg"}, "Set build-time variables")

	ulimits := make(map[string]*ulimit.Ulimit)
	flUlimits := opts.NewUlimitOpt(&ulimits)
	cmd.Var(flUlimits, []string{"-ulimit"}, "Ulimit options")

	cmd.Require(flag.Exact, 1)

	// For trusted pull on "FROM <image>" instruction.
	addTrustedFlags(cmd, true)

	cmd.ParseFlags(args, true)

	var (
		context  io.ReadCloser
		isRemote bool
		err      error
	)

	_, err = exec.LookPath("git")
	hasGit := err == nil

	specifiedContext := cmd.Arg(0)

	var (
		contextDir    string
		tempDir       string
		relDockerfile string
	)

	switch {
	case specifiedContext == "-":
		tempDir, relDockerfile, err = getContextFromReader(cli.in, *dockerfileName)
	case urlutil.IsGitURL(specifiedContext) && hasGit:
		tempDir, relDockerfile, err = getContextFromGitURL(specifiedContext, *dockerfileName)
	case urlutil.IsURL(specifiedContext):
		tempDir, relDockerfile, err = getContextFromURL(cli.out, specifiedContext, *dockerfileName)
	default:
		contextDir, relDockerfile, err = getContextFromLocalDir(specifiedContext, *dockerfileName)
	}

	if err != nil {
		return fmt.Errorf("unable to prepare context: %s", err)
	}

	if tempDir != "" {
		defer os.RemoveAll(tempDir)
		contextDir = tempDir
	}

	// Resolve the FROM lines in the Dockerfile to trusted digest references
	// using Notary. On a successful build, we must tag the resolved digests
	// to the original name specified in the Dockerfile.
	newDockerfile, resolvedTags, err := rewriteDockerfileFrom(filepath.Join(contextDir, relDockerfile), cli.trustedReference)
	if err != nil {
		return fmt.Errorf("unable to process Dockerfile: %v", err)
	}
	defer newDockerfile.Close()

	// And canonicalize dockerfile name to a platform-independent one
	relDockerfile, err = archive.CanonicalTarNameForPath(relDockerfile)
	if err != nil {
		return fmt.Errorf("cannot canonicalize dockerfile path %s: %v", relDockerfile, err)
	}

	f, err := os.Open(filepath.Join(contextDir, ".dockerignore"))
	if err != nil && !os.IsNotExist(err) {
		return err
	}

	var excludes []string
	if err == nil {
		excludes, err = utils.ReadDockerIgnore(f)
		if err != nil {
			return err
		}
//.........这里部分代码省略.........

func (s *TagStore) pullV2Tag(r *registry.Session, out io.Writer, endpoint *registry.Endpoint, repoInfo *registry.RepositoryInfo, tag string, sf *streamformatter.StreamFormatter, auth *registry.RequestAuthorization) (bool, error) {
	logrus.Debugf("Pulling tag from V2 registry: %q", tag)

	remoteDigest, manifestBytes, err := r.GetV2ImageManifest(endpoint, repoInfo.RemoteName, tag, auth)
	if err != nil {
		return false, err
	}

	// loadManifest ensures that the manifest payload has the expected digest
	// if the tag is a digest reference.
	localDigest, manifest, verified, err := s.loadManifest(manifestBytes, tag, remoteDigest)
	if err != nil {
		return false, fmt.Errorf("error verifying manifest: %s", err)
	}

	if verified {
		logrus.Printf("Image manifest for %s has been verified", utils.ImageReference(repoInfo.CanonicalName, tag))
	}
	out.Write(sf.FormatStatus(tag, "Pulling from %s", repoInfo.CanonicalName))

	// downloadInfo is used to pass information from download to extractor
	type downloadInfo struct {
		imgJSON    []byte
		img        *image.Image
		digest     digest.Digest
		tmpFile    *os.File
		length     int64
		downloaded bool
		err        chan error
	}