//.........这里部分代码省略.........
	if tempDir != "" {
		defer os.RemoveAll(tempDir)
		contextDir = tempDir
	}

	// Resolve the FROM lines in the Dockerfile to trusted digest references
	// using Notary. On a successful build, we must tag the resolved digests
	// to the original name specified in the Dockerfile.
	newDockerfile, resolvedTags, err := rewriteDockerfileFrom(filepath.Join(contextDir, relDockerfile), cli.trustedReference)
	if err != nil {
		return fmt.Errorf("unable to process Dockerfile: %v", err)
	}
	defer newDockerfile.Close()

	// And canonicalize dockerfile name to a platform-independent one
	relDockerfile, err = archive.CanonicalTarNameForPath(relDockerfile)
	if err != nil {
		return fmt.Errorf("cannot canonicalize dockerfile path %s: %v", relDockerfile, err)
	}

	f, err := os.Open(filepath.Join(contextDir, ".dockerignore"))
	if err != nil && !os.IsNotExist(err) {
		return err
	}

	var excludes []string
	if err == nil {
		excludes, err = dockerignore.ReadAll(f)
		if err != nil {
			return err
		}
	}

	if err := utils.ValidateContextDirectory(contextDir, excludes); err != nil {
		return fmt.Errorf("Error checking context: '%s'.", err)
	}

	// If .dockerignore mentions .dockerignore or the Dockerfile
	// then make sure we send both files over to the daemon
	// because Dockerfile is, obviously, needed no matter what, and
	// .dockerignore is needed to know if either one needs to be
	// removed. The daemon will remove them for us, if needed, after it
	// parses the Dockerfile. Ignore errors here, as they will have been
	// caught by ValidateContextDirectory above.
	var includes = []string{"."}
	keepThem1, _ := fileutils.Matches(".dockerignore", excludes)
	keepThem2, _ := fileutils.Matches(relDockerfile, excludes)
	if keepThem1 || keepThem2 {
		includes = append(includes, ".dockerignore", relDockerfile)
	}

	context, err = archive.TarWithOptions(contextDir, &archive.TarOptions{
		Compression:     archive.Uncompressed,
		ExcludePatterns: excludes,
		IncludeFiles:    includes,
	})
	if err != nil {
		return err
	}

	// Wrap the tar archive to replace the Dockerfile entry with the rewritten
	// Dockerfile which uses trusted pulls.
	context = replaceDockerfileTarWrapper(context, newDockerfile, relDockerfile)

	// Setup an upload progress bar
	progressOutput := streamformatter.NewStreamFormatter().NewProgressOutput(progBuff, true)

//.........这里部分代码省略.........
		// Now reset the dockerfileName to be relative to the build context
		*dockerfileName, err = filepath.Rel(absRoot, filename)
		if err != nil {
			return err
		}
		// And canonicalize dockerfile name to a platform-independent one
		*dockerfileName, err = archive.CanonicalTarNameForPath(*dockerfileName)
		if err != nil {
			return fmt.Errorf("Cannot canonicalize dockerfile path %s: %v", *dockerfileName, err)
		}

		if _, err = os.Lstat(filename); os.IsNotExist(err) {
			return fmt.Errorf("Cannot locate Dockerfile: %s", origDockerfile)
		}
		var includes = []string{"."}

		excludes, err := utils.ReadDockerIgnore(path.Join(root, ".dockerignore"))
		if err != nil {
			return err
		}

		// If .dockerignore mentions .dockerignore or the Dockerfile
		// then make sure we send both files over to the daemon
		// because Dockerfile is, obviously, needed no matter what, and
		// .dockerignore is needed to know if either one needs to be
		// removed.  The deamon will remove them for us, if needed, after it
		// parses the Dockerfile.
		keepThem1, _ := fileutils.Matches(".dockerignore", excludes)
		keepThem2, _ := fileutils.Matches(*dockerfileName, excludes)
		if keepThem1 || keepThem2 {
			includes = append(includes, ".dockerignore", *dockerfileName)
		}

		if err := utils.ValidateContextDirectory(root, excludes); err != nil {
			return fmt.Errorf("Error checking context is accessible: '%s'. Please check permissions and try again.", err)
		}
		options := &archive.TarOptions{
			Compression:     archive.Uncompressed,
			ExcludePatterns: excludes,
			IncludeFiles:    includes,
		}
		context, err = archive.TarWithOptions(root, options)
		if err != nil {
			return err
		}
	}

	// windows: show error message about modified file permissions
	// FIXME: this is not a valid warning when the daemon is running windows. should be removed once docker engine for windows can build.
	if runtime.GOOS == "windows" {
		logrus.Warn(`SECURITY WARNING: You are building a Docker image from Windows against a Linux Docker host. All files and directories added to build context will have '-rwxr-xr-x' permissions. It is recommended to double check and reset permissions for sensitive files and directories.`)
	}

	var body io.Reader
	// Setup an upload progress bar
	// FIXME: ProgressReader shouldn't be this annoying to use
	if context != nil {
		sf := streamformatter.NewStreamFormatter(false)
		body = progressreader.New(progressreader.Config{
			In:        context,
			Out:       cli.out,
			Formatter: sf,
			NewLines:  true,
			ID:        "",
			Action:    "Sending build context to Docker daemon",
		})

// hyper build [OPTIONS] PATH
func (cli *HyperClient) HyperCmdBuild(args ...string) error {
	var opts struct {
		ImageName      string `long:"tag" short:"t" default:"" value-name:"\"\"" default-mask:"-" description:"Repository name (and optionally a tag) to be applied to the resulting image in case of success"`
		DockerfileName string `long:"file" short:"f" default:"" value-name:"\"\"" default-mask:"-" description:"Customized docker file"`
	}

	var parser = gflag.NewParser(&opts, gflag.Default)
	parser.Usage = "build [OPTIONS] PATH\n\nBuild a new image from the source code at PATH"
	args, err := parser.ParseArgs(args)
	if err != nil {
		if !strings.Contains(err.Error(), "Usage") {
			return err
		} else {
			return nil
		}
	}

	if len(args) == 0 {
		return fmt.Errorf("%s: \"build\" requires a minimum of 1 argument, See 'hyper build --help'.", os.Args[0])
	}
	var (
		filename = ""
		context  archive.Archive
		name     = ""
	)
	root := args[0]
	if _, err := os.Stat(root); err != nil {
		return err
	}

	absRoot, err := filepath.Abs(root)
	if err != nil {
		return err
	}

	filename = opts.DockerfileName // path to Dockerfile

	if opts.DockerfileName == "" {
		// No -f/--file was specified so use the default
		opts.DockerfileName = api.DefaultDockerfileName
		filename = filepath.Join(absRoot, opts.DockerfileName)

		// Just to be nice ;-) look for 'dockerfile' too but only
		// use it if we found it, otherwise ignore this check
		if _, err = os.Lstat(filename); os.IsNotExist(err) {
			tmpFN := path.Join(absRoot, strings.ToLower(opts.DockerfileName))
			if _, err = os.Lstat(tmpFN); err == nil {
				opts.DockerfileName = strings.ToLower(opts.DockerfileName)
				filename = tmpFN
			}
		}
	}

	origDockerfile := opts.DockerfileName // used for error msg
	if filename, err = filepath.Abs(filename); err != nil {
		return err
	}

	// Verify that 'filename' is within the build context
	filename, err = symlink.FollowSymlinkInScope(filename, absRoot)
	if err != nil {
		return fmt.Errorf("The Dockerfile (%s) must be within the build context (%s)", origDockerfile, root)
	}

	// Now reset the dockerfileName to be relative to the build context
	opts.DockerfileName, err = filepath.Rel(absRoot, filename)
	if err != nil {
		return err
	}
	// And canonicalize dockerfile name to a platform-independent one
	opts.DockerfileName, err = archive.CanonicalTarNameForPath(opts.DockerfileName)
	if err != nil {
		return fmt.Errorf("Cannot canonicalize dockerfile path %s: %v", opts.DockerfileName, err)
	}

	if _, err = os.Lstat(filename); os.IsNotExist(err) {
		return fmt.Errorf("Cannot locate Dockerfile: %s", origDockerfile)
	}
	var includes = []string{"."}

	f, err := os.Open(filepath.Join(root, ".dockerignore"))
	if err != nil && !os.IsNotExist(err) {
		return err
	}
	defer f.Close()

	var excludes []string
	if err == nil {
		excludes, err = utils.ReadDockerIgnore(f)
		if err != nil {
			return err
		}
	}

	if err := utils.ValidateContextDirectory(root, excludes); err != nil {
		return fmt.Errorf("Error checking context: '%s'.", err)
	}

	// If .dockerignore mentions .dockerignore or the Dockerfile
//.........这里部分代码省略.........

//.........这里部分代码省略.........
	if tempDir != "" {
		defer os.RemoveAll(tempDir)
		contextDir = tempDir
	}

	// Resolve the FROM lines in the Dockerfile to trusted digest references
	// using Notary. On a successful build, we must tag the resolved digests
	// to the original name specified in the Dockerfile.
	newDockerfile, resolvedTags, err := rewriteDockerfileFrom(filepath.Join(contextDir, relDockerfile), cli.trustedReference)
	if err != nil {
		return fmt.Errorf("unable to process Dockerfile: %v", err)
	}
	defer newDockerfile.Close()

	// And canonicalize dockerfile name to a platform-independent one
	relDockerfile, err = archive.CanonicalTarNameForPath(relDockerfile)
	if err != nil {
		return fmt.Errorf("cannot canonicalize dockerfile path %s: %v", relDockerfile, err)
	}

	f, err := os.Open(filepath.Join(contextDir, ".dockerignore"))
	if err != nil && !os.IsNotExist(err) {
		return err
	}

	var excludes []string
	if err == nil {
		excludes, err = utils.ReadDockerIgnore(f)
		if err != nil {
			return err
		}
	}

	if err := utils.ValidateContextDirectory(contextDir, excludes); err != nil {
		return fmt.Errorf("Error checking context: '%s'.", err)
	}

	// If .dockerignore mentions .dockerignore or the Dockerfile
	// then make sure we send both files over to the daemon
	// because Dockerfile is, obviously, needed no matter what, and
	// .dockerignore is needed to know if either one needs to be
	// removed.  The deamon will remove them for us, if needed, after it
	// parses the Dockerfile. Ignore errors here, as they will have been
	// caught by ValidateContextDirectory above.
	var includes = []string{"."}
	keepThem1, _ := fileutils.Matches(".dockerignore", excludes)
	keepThem2, _ := fileutils.Matches(relDockerfile, excludes)
	if keepThem1 || keepThem2 {
		includes = append(includes, ".dockerignore", relDockerfile)
	}

	context, err = archive.TarWithOptions(contextDir, &archive.TarOptions{
		Compression:     archive.Uncompressed,
		ExcludePatterns: excludes,
		IncludeFiles:    includes,
	})
	if err != nil {
		return err
	}

	// Wrap the tar archive to replace the Dockerfile entry with the rewritten
	// Dockerfile which uses trusted pulls.
	context = replaceDockerfileTarWrapper(context, newDockerfile, relDockerfile)

	// Setup an upload progress bar
	// FIXME: ProgressReader shouldn't be this annoying to use

// CreateTar create a build context tar for the specified project and service name.
func CreateTar(p *project.Project, name string) (io.ReadCloser, error) {
	// This code was ripped off from docker/api/client/build.go

	serviceConfig := p.Configs[name]
	root := serviceConfig.Build
	dockerfileName := filepath.Join(root, serviceConfig.Dockerfile)

	absRoot, err := filepath.Abs(root)
	if err != nil {
		return nil, err
	}

	filename := dockerfileName

	if dockerfileName == "" {
		// No -f/--file was specified so use the default
		dockerfileName = DefaultDockerfileName
		filename = filepath.Join(absRoot, dockerfileName)

		// Just to be nice ;-) look for 'dockerfile' too but only
		// use it if we found it, otherwise ignore this check
		if _, err = os.Lstat(filename); os.IsNotExist(err) {
			tmpFN := path.Join(absRoot, strings.ToLower(dockerfileName))
			if _, err = os.Lstat(tmpFN); err == nil {
				dockerfileName = strings.ToLower(dockerfileName)
				filename = tmpFN
			}
		}
	}

	origDockerfile := dockerfileName // used for error msg
	if filename, err = filepath.Abs(filename); err != nil {
		return nil, err
	}

	// Now reset the dockerfileName to be relative to the build context
	dockerfileName, err = filepath.Rel(absRoot, filename)
	if err != nil {
		return nil, err
	}

	// And canonicalize dockerfile name to a platform-independent one
	dockerfileName, err = archive.CanonicalTarNameForPath(dockerfileName)
	if err != nil {
		return nil, fmt.Errorf("Cannot canonicalize dockerfile path %s: %v", dockerfileName, err)
	}

	if _, err = os.Lstat(filename); os.IsNotExist(err) {
		return nil, fmt.Errorf("Cannot locate Dockerfile: %s", origDockerfile)
	}
	var includes = []string{"."}
	var excludes []string

	dockerIgnorePath := path.Join(root, ".dockerignore")
	dockerIgnore, err := os.Open(dockerIgnorePath)
	if err != nil {
		if !os.IsNotExist(err) {
			return nil, err
		}
		logrus.Warnf("Error while reading .dockerignore (%s) : %s", dockerIgnorePath, err.Error())
		excludes = make([]string, 0)
	} else {
		excludes, err = utils.ReadDockerIgnore(dockerIgnore)
		if err != nil {
			return nil, err
		}
	}

	// If .dockerignore mentions .dockerignore or the Dockerfile
	// then make sure we send both files over to the daemon
	// because Dockerfile is, obviously, needed no matter what, and
	// .dockerignore is needed to know if either one needs to be
	// removed.  The deamon will remove them for us, if needed, after it
	// parses the Dockerfile.
	keepThem1, _ := fileutils.Matches(".dockerignore", excludes)
	keepThem2, _ := fileutils.Matches(dockerfileName, excludes)
	if keepThem1 || keepThem2 {
		includes = append(includes, ".dockerignore", dockerfileName)
	}

	if err := utils.ValidateContextDirectory(root, excludes); err != nil {
		return nil, fmt.Errorf("Error checking context is accessible: '%s'. Please check permissions and try again.", err)
	}

	options := &archive.TarOptions{
		Compression:     archive.Uncompressed,
		ExcludePatterns: excludes,
		IncludeFiles:    includes,
	}

	return archive.TarWithOptions(root, options)
}