Golang volume.ParseVolumesFrom函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Golang中github.com/docker/docker/volume.ParseVolumesFrom函数的典型用法代码示例。如果您正苦于以下问题：Golang ParseVolumesFrom函数的具体用法？Golang ParseVolumesFrom怎么用？Golang ParseVolumesFrom使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了ParseVolumesFrom函数的4个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Golang代码示例。

示例1: TestParseVolumesFrom

func TestParseVolumesFrom(t *testing.T) {
	cases := []struct {
		spec    string
		expID   string
		expMode string
		fail    bool
	}{
		{"", "", "", true},
		{"foobar", "foobar", "rw", false},
		{"foobar:rw", "foobar", "rw", false},
		{"foobar:ro", "foobar", "ro", false},
		{"foobar:baz", "", "", true},
	}

	for _, c := range cases {
		id, mode, err := volume.ParseVolumesFrom(c.spec)
		if c.fail {
			if err == nil {
				t.Fatalf("Expected error, was nil, for spec %s\n", c.spec)
			}
			continue
		}

		if id != c.expID {
			t.Fatalf("Expected id %s, was %s, for spec %s\n", c.expID, id, c.spec)
		}
		if mode != c.expMode {
			t.Fatalf("Expected mode %s, was %s for spec %s\n", c.expMode, mode, c.spec)
		}
	}
}

开发者ID:m1911，项目名称:hyper，代码行数:31，代码来源:volumes_unit_test.go

示例2: registerMountPoints

// registerMountPoints initializes the container mount points with the configured volumes and bind mounts.
// It follows the next sequence to decide what to mount in each final destination:
//
// 1. Select the previously configured mount points for the containers, if any.
// 2. Select the volumes mounted from another containers. Overrides previously configured mount point destination.
// 3. Select the bind mounts set by the client. Overrides previously configured mount point destinations.
// 4. Cleanup old volumes that are about to be reassigned.
func (daemon *Daemon) registerMountPoints(container *container.Container, hostConfig *containertypes.HostConfig) (retErr error) {
	binds := map[string]bool{}
	mountPoints := map[string]*volume.MountPoint{}
	defer func() {
		// clean up the container mountpoints once return with error
		if retErr != nil {
			for _, m := range mountPoints {
				if m.Volume == nil {
					continue
				}
				daemon.volumes.Dereference(m.Volume, container.ID)
			}
		}
	}()

	// 1. Read already configured mount points.
	for destination, point := range container.MountPoints {
		mountPoints[destination] = point
	}

	// 2. Read volumes from other containers.
	for _, v := range hostConfig.VolumesFrom {
		containerID, mode, err := volume.ParseVolumesFrom(v)
		if err != nil {
			return err
		}

		c, err := daemon.GetContainer(containerID)
		if err != nil {
			return err
		}

		for _, m := range c.MountPoints {
			cp := &volume.MountPoint{
				Name:        m.Name,
				Source:      m.Source,
				RW:          m.RW && volume.ReadWrite(mode),
				Driver:      m.Driver,
				Destination: m.Destination,
				Propagation: m.Propagation,
				Spec:        m.Spec,
				CopyData:    false,
			}

			if len(cp.Source) == 0 {
				v, err := daemon.volumes.GetWithRef(cp.Name, cp.Driver, container.ID)
				if err != nil {
					return err
				}
				cp.Volume = v
			}

			mountPoints[cp.Destination] = cp
		}
	}

	// 3. Read bind mounts
	for _, b := range hostConfig.Binds {
		bind, err := volume.ParseMountRaw(b, hostConfig.VolumeDriver)
		if err != nil {
			return err
		}

		// #10618
		_, tmpfsExists := hostConfig.Tmpfs[bind.Destination]
		if binds[bind.Destination] || tmpfsExists {
			return fmt.Errorf("Duplicate mount point '%s'", bind.Destination)
		}

		if bind.Type == mounttypes.TypeVolume {
			// create the volume
			v, err := daemon.volumes.CreateWithRef(bind.Name, bind.Driver, container.ID, nil, nil)
			if err != nil {
				return err
			}
			bind.Volume = v
			bind.Source = v.Path()
			// bind.Name is an already existing volume, we need to use that here
			bind.Driver = v.DriverName()
			if bind.Driver == volume.DefaultDriverName {
				setBindModeIfNull(bind)
			}
		}

		binds[bind.Destination] = true
		mountPoints[bind.Destination] = bind
	}

	for _, cfg := range hostConfig.Mounts {
		mp, err := volume.ParseMountSpec(cfg)
		if err != nil {
			return dockererrors.NewBadRequestError(err)
		}
//.........这里部分代码省略.........

开发者ID:Mic92，项目名称:docker，代码行数:101，代码来源:volumes.go

示例3: registerMountPoints

// registerMountPoints initializes the container mount points with the configured volumes and bind mounts.
// It follows the next sequence to decide what to mount in each final destination:
//
// 1. Select the previously configured mount points for the containers, if any.
// 2. Select the volumes mounted from another containers. Overrides previously configured mount point destination.
// 3. Select the bind mounts set by the client. Overrides previously configured mount point destinations.
// 4. Cleanup old volumes that are about to be reasigned.
func (daemon *Daemon) registerMountPoints(container *Container, hostConfig *runconfig.HostConfig) error {
	binds := map[string]bool{}
	mountPoints := map[string]*volume.MountPoint{}

	// 1. Read already configured mount points.
	for name, point := range container.MountPoints {
		mountPoints[name] = point
	}

	// 2. Read volumes from other containers.
	for _, v := range hostConfig.VolumesFrom {
		containerID, mode, err := volume.ParseVolumesFrom(v)
		if err != nil {
			return err
		}

		c, err := daemon.Get(containerID)
		if err != nil {
			return err
		}

		for _, m := range c.MountPoints {
			cp := &volume.MountPoint{
				Name:        m.Name,
				Source:      m.Source,
				RW:          m.RW && volume.ReadWrite(mode),
				Driver:      m.Driver,
				Destination: m.Destination,
			}

			if len(cp.Source) == 0 {
				v, err := daemon.createVolume(cp.Name, cp.Driver, nil)
				if err != nil {
					return err
				}
				cp.Volume = v
			}

			mountPoints[cp.Destination] = cp
		}
	}

	// 3. Read bind mounts
	for _, b := range hostConfig.Binds {
		// #10618
		bind, err := volume.ParseMountSpec(b, hostConfig.VolumeDriver)
		if err != nil {
			return err
		}

		if binds[bind.Destination] {
			return derr.ErrorCodeVolumeDup.WithArgs(bind.Destination)
		}

		if len(bind.Name) > 0 && len(bind.Driver) > 0 {
			// create the volume
			v, err := daemon.createVolume(bind.Name, bind.Driver, nil)
			if err != nil {
				return err
			}
			bind.Volume = v
			bind.Source = v.Path()
			// bind.Name is an already existing volume, we need to use that here
			bind.Driver = v.DriverName()
			bind = setBindModeIfNull(bind)
		}
		if label.RelabelNeeded(bind.Mode) {
			if err := label.Relabel(bind.Source, container.MountLabel, label.IsShared(bind.Mode)); err != nil {
				return err
			}
		}
		binds[bind.Destination] = true
		mountPoints[bind.Destination] = bind
	}

	container.Lock()

	// 4. Cleanup old volumes that are about to be reasigned.
	for _, m := range mountPoints {
		if m.BackwardsCompatible() {
			if mp, exists := container.MountPoints[m.Destination]; exists && mp.Volume != nil {
				daemon.volumes.Decrement(mp.Volume)
			}
		}
	}
	container.MountPoints = mountPoints

	container.Unlock()

	return nil
}

开发者ID:m1911，项目名称:hyper，代码行数:98，代码来源:volumes.go

示例4: registerMountPoints

// registerMountPoints initializes the container mount points with the configured volumes and bind mounts.
// It follows the next sequence to decide what to mount in each final destination:
//
// 1. Select the previously configured mount points for the containers, if any.
// 2. Select the volumes mounted from another containers. Overrides previously configured mount point destination.
// 3. Select the bind mounts set by the client. Overrides previously configured mount point destinations.
// 4. Cleanup old volumes that are about to be reassigned.
func (daemon *Daemon) registerMountPoints(container *container.Container, hostConfig *containertypes.HostConfig) (retErr error) {
	binds := map[string]bool{}
	mountPoints := map[string]*volume.MountPoint{}
	defer func() {
		// clean up the container mountpoints once return with error
		if retErr != nil {
			for _, m := range mountPoints {
				if m.Volume == nil {
					continue
				}
				daemon.volumes.Dereference(m.Volume, container.ID)
			}
		}
	}()

	// 1. Read already configured mount points.
	for name, point := range container.MountPoints {
		mountPoints[name] = point
	}

	// 2. Read volumes from other containers.
	for _, v := range hostConfig.VolumesFrom {
		containerID, mode, err := volume.ParseVolumesFrom(v)
		if err != nil {
			return err
		}

		c, err := daemon.GetContainer(containerID)
		if err != nil {
			return err
		}

		for _, m := range c.MountPoints {
			cp := &volume.MountPoint{
				Name:        m.Name,
				Source:      m.Source,
				RW:          m.RW && volume.ReadWrite(mode),
				Driver:      m.Driver,
				Destination: m.Destination,
				Propagation: m.Propagation,
				Named:       m.Named,
			}

			if len(cp.Source) == 0 {
				v, err := daemon.volumes.GetWithRef(cp.Name, cp.Driver, container.ID)
				if err != nil {
					return err
				}
				cp.Volume = v
			}

			mountPoints[cp.Destination] = cp
		}
	}

	// 3. Read bind mounts
	for _, b := range hostConfig.Binds {
		// #10618
		bind, err := volume.ParseMountSpec(b, hostConfig.VolumeDriver)
		if err != nil {
			return err
		}

		_, tmpfsExists := hostConfig.Tmpfs[bind.Destination]
		if binds[bind.Destination] || tmpfsExists {
			return fmt.Errorf("Duplicate mount point '%s'", bind.Destination)
		}

		if len(bind.Name) > 0 {
			// create the volume
			v, err := daemon.volumes.CreateWithRef(bind.Name, bind.Driver, container.ID, nil, nil)
			if err != nil {
				return err
			}
			bind.Volume = v
			bind.Source = v.Path()
			// bind.Name is an already existing volume, we need to use that here
			bind.Driver = v.DriverName()
			bind.Named = true
			if bind.Driver == "local" {
				bind = setBindModeIfNull(bind)
			}
		}

		binds[bind.Destination] = true
		mountPoints[bind.Destination] = bind
	}

	container.Lock()

	// 4. Cleanup old volumes that are about to be reassigned.
	for _, m := range mountPoints {
		if m.BackwardsCompatible() {
//.........这里部分代码省略.........

开发者ID:CheggEng，项目名称:docker，代码行数:101，代码来源:volumes.go

注：本文中的github.com/docker/docker/volume.ParseVolumesFrom函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。