Golang nat.SortPortMap函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Golang中github.com/docker/go-connections/nat.SortPortMap函数的典型用法代码示例。如果您正苦于以下问题：Golang SortPortMap函数的具体用法？Golang SortPortMap怎么用？Golang SortPortMap使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了SortPortMap函数的4个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Golang代码示例。

示例1: BuildCreateEndpointOptions


//.........这里部分代码省略.........
	}

	if !containertypes.NetworkMode(n.Name()).IsUserDefined() {
		createOptions = append(createOptions, libnetwork.CreateOptionDisableResolution())
	}

	// configs that are applicable only for the endpoint in the network
	// to which container was connected to on docker run.
	// Ideally all these network-specific endpoint configurations must be moved under
	// container.NetworkSettings.Networks[n.Name()]
	if n.Name() == container.HostConfig.NetworkMode.NetworkName() ||
		(n.Name() == defaultNetName && container.HostConfig.NetworkMode.IsDefault()) {
		if container.Config.MacAddress != "" {
			mac, err := net.ParseMAC(container.Config.MacAddress)
			if err != nil {
				return nil, err
			}

			genericOption := options.Generic{
				netlabel.MacAddress: mac,
			}

			createOptions = append(createOptions, libnetwork.EndpointOptionGeneric(genericOption))
		}
	}

	// Port-mapping rules belong to the container & applicable only to non-internal networks
	portmaps := GetSandboxPortMapInfo(sb)
	if n.Info().Internal() || len(portmaps) > 0 {
		return createOptions, nil
	}

	if container.HostConfig.PortBindings != nil {
		for p, b := range container.HostConfig.PortBindings {
			bindings[p] = []nat.PortBinding{}
			for _, bb := range b {
				bindings[p] = append(bindings[p], nat.PortBinding{
					HostIP:   bb.HostIP,
					HostPort: bb.HostPort,
				})
			}
		}
	}

	portSpecs := container.Config.ExposedPorts
	ports := make([]nat.Port, len(portSpecs))
	var i int
	for p := range portSpecs {
		ports[i] = p
		i++
	}
	nat.SortPortMap(ports, bindings)
	for _, port := range ports {
		expose := types.TransportPort{}
		expose.Proto = types.ParseProtocol(port.Proto())
		expose.Port = uint16(port.Int())
		exposeList = append(exposeList, expose)

		pb := types.PortBinding{Port: expose.Port, Proto: expose.Proto}
		binding := bindings[port]
		for i := 0; i < len(binding); i++ {
			pbCopy := pb.GetCopy()
			newP, err := nat.NewPort(nat.SplitProtoPort(binding[i].HostPort))
			var portStart, portEnd int
			if err == nil {
				portStart, portEnd, err = newP.Range()
			}
			if err != nil {
				return nil, fmt.Errorf("Error parsing HostPort value(%s):%v", binding[i].HostPort, err)
			}
			pbCopy.HostPort = uint16(portStart)
			pbCopy.HostPortEnd = uint16(portEnd)
			pbCopy.HostIP = net.ParseIP(binding[i].HostIP)
			pbList = append(pbList, pbCopy)
		}

		if container.HostConfig.PublishAllPorts && len(binding) == 0 {
			pbList = append(pbList, pb)
		}
	}

	var dns []string

	if len(container.HostConfig.DNS) > 0 {
		dns = container.HostConfig.DNS
	} else if len(daemonDNS) > 0 {
		dns = daemonDNS
	}

	if len(dns) > 0 {
		createOptions = append(createOptions,
			libnetwork.CreateOptionDNS(dns))
	}

	createOptions = append(createOptions,
		libnetwork.CreateOptionPortMapping(pbList),
		libnetwork.CreateOptionExposedPorts(exposeList))

	return createOptions, nil
}

开发者ID:docker，项目名称:dockercraft，代码行数:101，代码来源:container.go

示例2: BuildCreateEndpointOptions

// BuildCreateEndpointOptions builds endpoint options from a given network.
func (container *Container) BuildCreateEndpointOptions(n libnetwork.Network, epConfig *network.EndpointSettings, sb libnetwork.Sandbox) ([]libnetwork.EndpointOption, error) {
	var (
		portSpecs     = make(nat.PortSet)
		bindings      = make(nat.PortMap)
		pbList        []types.PortBinding
		exposeList    []types.TransportPort
		createOptions []libnetwork.EndpointOption
	)

	if n.Name() == "bridge" || container.NetworkSettings.IsAnonymousEndpoint {
		createOptions = append(createOptions, libnetwork.CreateOptionAnonymous())
	}

	if epConfig != nil {
		ipam := epConfig.IPAMConfig
		if ipam != nil && (ipam.IPv4Address != "" || ipam.IPv6Address != "") {
			createOptions = append(createOptions,
				libnetwork.CreateOptionIpam(net.ParseIP(ipam.IPv4Address), net.ParseIP(ipam.IPv6Address), nil))
		}

		for _, alias := range epConfig.Aliases {
			createOptions = append(createOptions, libnetwork.CreateOptionMyAlias(alias))
		}
	}

	if !containertypes.NetworkMode(n.Name()).IsUserDefined() {
		createOptions = append(createOptions, libnetwork.CreateOptionDisableResolution())
	}

	// configs that are applicable only for the endpoint in the network
	// to which container was connected to on docker run.
	// Ideally all these network-specific endpoint configurations must be moved under
	// container.NetworkSettings.Networks[n.Name()]
	if n.Name() == container.HostConfig.NetworkMode.NetworkName() ||
		(n.Name() == "bridge" && container.HostConfig.NetworkMode.IsDefault()) {
		if container.Config.MacAddress != "" {
			mac, err := net.ParseMAC(container.Config.MacAddress)
			if err != nil {
				return nil, err
			}

			genericOption := options.Generic{
				netlabel.MacAddress: mac,
			}

			createOptions = append(createOptions, libnetwork.EndpointOptionGeneric(genericOption))
		}
	}

	// Port-mapping rules belong to the container & applicable only to non-internal networks
	portmaps := getSandboxPortMapInfo(sb)
	if n.Info().Internal() || len(portmaps) > 0 {
		return createOptions, nil
	}

	if container.Config.ExposedPorts != nil {
		portSpecs = container.Config.ExposedPorts
	}

	if container.HostConfig.PortBindings != nil {
		for p, b := range container.HostConfig.PortBindings {
			bindings[p] = []nat.PortBinding{}
			for _, bb := range b {
				bindings[p] = append(bindings[p], nat.PortBinding{
					HostIP:   bb.HostIP,
					HostPort: bb.HostPort,
				})
			}
		}
	}

	ports := make([]nat.Port, len(portSpecs))
	var i int
	for p := range portSpecs {
		ports[i] = p
		i++
	}
	nat.SortPortMap(ports, bindings)
	for _, port := range ports {
		expose := types.TransportPort{}
		expose.Proto = types.ParseProtocol(port.Proto())
		expose.Port = uint16(port.Int())
		exposeList = append(exposeList, expose)

		pb := types.PortBinding{Port: expose.Port, Proto: expose.Proto}
		binding := bindings[port]
		for i := 0; i < len(binding); i++ {
			pbCopy := pb.GetCopy()
			newP, err := nat.NewPort(nat.SplitProtoPort(binding[i].HostPort))
			var portStart, portEnd int
			if err == nil {
				portStart, portEnd, err = newP.Range()
			}
			if err != nil {
				return nil, derr.ErrorCodeHostPort.WithArgs(binding[i].HostPort, err)
			}
			pbCopy.HostPort = uint16(portStart)
			pbCopy.HostPortEnd = uint16(portEnd)
			pbCopy.HostIP = net.ParseIP(binding[i].HostIP)
//.........这里部分代码省略.........

开发者ID:supasate，项目名称:docker，代码行数:101，代码来源:container_unix.go

示例3: BuildCreateEndpointOptions

// BuildCreateEndpointOptions builds endpoint options from a given network.
func (container *Container) BuildCreateEndpointOptions(n libnetwork.Network) ([]libnetwork.EndpointOption, error) {
	var (
		portSpecs     = make(nat.PortSet)
		bindings      = make(nat.PortMap)
		pbList        []types.PortBinding
		exposeList    []types.TransportPort
		createOptions []libnetwork.EndpointOption
	)

	if n.Name() == "bridge" || container.NetworkSettings.IsAnonymousEndpoint {
		createOptions = append(createOptions, libnetwork.CreateOptionAnonymous())
	}

	// Other configs are applicable only for the endpoint in the network
	// to which container was connected to on docker run.
	if n.Name() != container.HostConfig.NetworkMode.NetworkName() &&
		!(n.Name() == "bridge" && container.HostConfig.NetworkMode.IsDefault()) {
		return createOptions, nil
	}

	if container.Config.ExposedPorts != nil {
		portSpecs = container.Config.ExposedPorts
	}

	if container.HostConfig.PortBindings != nil {
		for p, b := range container.HostConfig.PortBindings {
			bindings[p] = []nat.PortBinding{}
			for _, bb := range b {
				bindings[p] = append(bindings[p], nat.PortBinding{
					HostIP:   bb.HostIP,
					HostPort: bb.HostPort,
				})
			}
		}
	}

	ports := make([]nat.Port, len(portSpecs))
	var i int
	for p := range portSpecs {
		ports[i] = p
		i++
	}
	nat.SortPortMap(ports, bindings)
	for _, port := range ports {
		expose := types.TransportPort{}
		expose.Proto = types.ParseProtocol(port.Proto())
		expose.Port = uint16(port.Int())
		exposeList = append(exposeList, expose)

		pb := types.PortBinding{Port: expose.Port, Proto: expose.Proto}
		binding := bindings[port]
		for i := 0; i < len(binding); i++ {
			pbCopy := pb.GetCopy()
			newP, err := nat.NewPort(nat.SplitProtoPort(binding[i].HostPort))
			var portStart, portEnd int
			if err == nil {
				portStart, portEnd, err = newP.Range()
			}
			if err != nil {
				return nil, derr.ErrorCodeHostPort.WithArgs(binding[i].HostPort, err)
			}
			pbCopy.HostPort = uint16(portStart)
			pbCopy.HostPortEnd = uint16(portEnd)
			pbCopy.HostIP = net.ParseIP(binding[i].HostIP)
			pbList = append(pbList, pbCopy)
		}

		if container.HostConfig.PublishAllPorts && len(binding) == 0 {
			pbList = append(pbList, pb)
		}
	}

	createOptions = append(createOptions,
		libnetwork.CreateOptionPortMapping(pbList),
		libnetwork.CreateOptionExposedPorts(exposeList))

	if container.Config.MacAddress != "" {
		mac, err := net.ParseMAC(container.Config.MacAddress)
		if err != nil {
			return nil, err
		}

		genericOption := options.Generic{
			netlabel.MacAddress: mac,
		}

		createOptions = append(createOptions, libnetwork.EndpointOptionGeneric(genericOption))
	}

	return createOptions, nil
}

开发者ID:Distrotech，项目名称:docker，代码行数:92，代码来源:container_unix.go

示例4: buildSandboxOptions


//.........这里部分代码省略.........
			name = name + "." + container.Config.Domainname
		}

		for _, a := range container.NetworkSettings.SecondaryIPAddresses {
			sboxOptions = append(sboxOptions, libnetwork.OptionExtraHost(name, a.Addr))
		}
	}

	for _, extraHost := range container.HostConfig.ExtraHosts {
		// allow IPv6 addresses in extra hosts; only split on first ":"
		parts := strings.SplitN(extraHost, ":", 2)
		sboxOptions = append(sboxOptions, libnetwork.OptionExtraHost(parts[0], parts[1]))
	}

	if container.HostConfig.PortBindings != nil {
		for p, b := range container.HostConfig.PortBindings {
			bindings[p] = []nat.PortBinding{}
			for _, bb := range b {
				bindings[p] = append(bindings[p], nat.PortBinding{
					HostIP:   bb.HostIP,
					HostPort: bb.HostPort,
				})
			}
		}
	}

	portSpecs := container.Config.ExposedPorts
	ports := make([]nat.Port, len(portSpecs))
	var i int
	for p := range portSpecs {
		ports[i] = p
		i++
	}
	nat.SortPortMap(ports, bindings)
	for _, port := range ports {
		expose := types.TransportPort{}
		expose.Proto = types.ParseProtocol(port.Proto())
		expose.Port = uint16(port.Int())
		exposeList = append(exposeList, expose)

		pb := types.PortBinding{Port: expose.Port, Proto: expose.Proto}
		binding := bindings[port]
		for i := 0; i < len(binding); i++ {
			pbCopy := pb.GetCopy()
			newP, err := nat.NewPort(nat.SplitProtoPort(binding[i].HostPort))
			var portStart, portEnd int
			if err == nil {
				portStart, portEnd, err = newP.Range()
			}
			if err != nil {
				return nil, fmt.Errorf("Error parsing HostPort value(%s):%v", binding[i].HostPort, err)
			}
			pbCopy.HostPort = uint16(portStart)
			pbCopy.HostPortEnd = uint16(portEnd)
			pbCopy.HostIP = net.ParseIP(binding[i].HostIP)
			pbList = append(pbList, pbCopy)
		}

		if container.HostConfig.PublishAllPorts && len(binding) == 0 {
			pbList = append(pbList, pb)
		}
	}

	sboxOptions = append(sboxOptions,
		libnetwork.OptionPortMapping(pbList),
		libnetwork.OptionExposedPorts(exposeList))

开发者ID:HackToday，项目名称:docker，代码行数:67，代码来源:container_operations.go

注：本文中的github.com/docker/go-connections/nat.SortPortMap函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。