本文整理汇总了Golang中github.com/dotcloud/docker/api.NewDockerCli函数的典型用法代码示例。如果您正苦于以下问题:Golang NewDockerCli函数的具体用法?Golang NewDockerCli怎么用?Golang NewDockerCli使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了NewDockerCli函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的Golang代码示例。
示例1: TestRunCidFileCleanupIfEmpty
// Ensure that CIDFile gets deleted if it's empty
// Perform this test by making `docker run` fail
func TestRunCidFileCleanupIfEmpty(t *testing.T) {
tmpDir, err := ioutil.TempDir("", "TestRunCidFile")
if err != nil {
t.Fatal(err)
}
tmpCidFile := path.Join(tmpDir, "cid")
cli := api.NewDockerCli(nil, ioutil.Discard, ioutil.Discard, testDaemonProto, testDaemonAddr)
defer cleanup(globalEngine, t)
c := make(chan struct{})
go func() {
defer close(c)
if err := cli.CmdRun("--cidfile", tmpCidFile, unitTestImageID); err == nil {
t.Fatal("running without a command should haveve failed")
}
if _, err := os.Stat(tmpCidFile); err == nil {
t.Fatalf("empty CIDFile '%s' should've been deleted", tmpCidFile)
}
}()
defer os.RemoveAll(tmpDir)
setTimeout(t, "CmdRun timed out", 5*time.Second, func() {
<-c
})
}
开发者ID:jhorey,项目名称:docker,代码行数:28,代码来源:commands_test.go
示例2: TestHttpsInfo
// TestHttpsInfo connects via two-way authenticated HTTPS to the info endpoint
func TestHttpsInfo(t *testing.T) {
cli := api.NewDockerCli(nil, ioutil.Discard, ioutil.Discard, testDaemonProto,
testDaemonHttpsAddr, getTlsConfig("client-cert.pem", "client-key.pem", t))
setTimeout(t, "Reading command output time out", 10*time.Second, func() {
if err := cli.CmdInfo(); err != nil {
t.Fatal(err)
}
})
}
开发者ID:jpgbus,项目名称:docker,代码行数:11,代码来源:https_test.go
示例3: TestRunExit
func TestRunExit(t *testing.T) {
stdin, stdinPipe := io.Pipe()
stdout, stdoutPipe := io.Pipe()
cli := api.NewDockerCli(stdin, stdoutPipe, ioutil.Discard, testDaemonProto, testDaemonAddr)
defer cleanup(globalEngine, t)
c1 := make(chan struct{})
go func() {
cli.CmdRun("-i", unitTestImageID, "/bin/cat")
close(c1)
}()
setTimeout(t, "Read/Write assertion timed out", 2*time.Second, func() {
if err := assertPipe("hello\n", "hello", stdout, stdinPipe, 150); err != nil {
t.Fatal(err)
}
})
container := globalRuntime.List()[0]
// Closing /bin/cat stdin, expect it to exit
if err := stdin.Close(); err != nil {
t.Fatal(err)
}
// as the process exited, CmdRun must finish and unblock. Wait for it
setTimeout(t, "Waiting for CmdRun timed out", 10*time.Second, func() {
<-c1
go func() {
cli.CmdWait(container.ID)
}()
if _, err := bufio.NewReader(stdout).ReadString('\n'); err != nil {
t.Fatal(err)
}
})
// Make sure that the client has been disconnected
setTimeout(t, "The client should have been disconnected once the remote process exited.", 2*time.Second, func() {
// Expecting pipe i/o error, just check that read does not block
stdin.Read([]byte{})
})
// Cleanup pipes
if err := closeWrap(stdin, stdinPipe, stdout, stdoutPipe); err != nil {
t.Fatal(err)
}
}
开发者ID:jhorey,项目名称:docker,代码行数:50,代码来源:commands_test.go
示例4: TestHttpsInfoRogueCert
// TestHttpsInfoRogueCert connects via two-way authenticated HTTPS to the info endpoint
// by using a rogue client certificate and checks that it fails with the expected error.
func TestHttpsInfoRogueCert(t *testing.T) {
cli := api.NewDockerCli(nil, ioutil.Discard, ioutil.Discard, testDaemonProto,
testDaemonHttpsAddr, getTlsConfig("client-rogue-cert.pem", "client-rogue-key.pem", t))
setTimeout(t, "Reading command output time out", 10*time.Second, func() {
err := cli.CmdInfo()
if err == nil {
t.Fatal("Expected error but got nil")
}
if err.Error() != errBadCertificate {
t.Fatalf("Expected error: %s, got instead: %s", errBadCertificate, err)
}
})
}
开发者ID:jpgbus,项目名称:docker,代码行数:16,代码来源:https_test.go
示例5: TestImagesViz
func TestImagesViz(t *testing.T) {
stdout, stdoutPipe := io.Pipe()
cli := api.NewDockerCli(nil, stdoutPipe, ioutil.Discard, testDaemonProto, testDaemonAddr)
defer cleanup(globalEngine, t)
image := buildTestImages(t, globalEngine)
c := make(chan struct{})
go func() {
defer close(c)
if err := cli.CmdImages("--viz"); err != nil {
t.Fatal(err)
}
stdoutPipe.Close()
}()
setTimeout(t, "Reading command output time out", 2*time.Second, func() {
cmdOutputBytes, err := ioutil.ReadAll(bufio.NewReader(stdout))
if err != nil {
t.Fatal(err)
}
cmdOutput := string(cmdOutputBytes)
regexpStrings := []string{
"digraph docker {",
fmt.Sprintf("base -> \"%s\" \\[style=invis]", unitTestImageIDShort),
fmt.Sprintf("label=\"%s\\\\n%s:latest\"", unitTestImageIDShort, unitTestImageName),
fmt.Sprintf("label=\"%s\\\\n%s:%s\"", utils.TruncateID(image.ID), "test", "latest"),
"base \\[style=invisible]",
}
compiledRegexps := []*regexp.Regexp{}
for _, regexpString := range regexpStrings {
regexp, err := regexp.Compile(regexpString)
if err != nil {
fmt.Println("Error in regex string: ", err)
return
}
compiledRegexps = append(compiledRegexps, regexp)
}
for _, regexp := range compiledRegexps {
if !regexp.MatchString(cmdOutput) {
t.Fatalf("images --viz content '%s' did not match regexp '%s'", cmdOutput, regexp)
}
}
})
}
开发者ID:jhorey,项目名称:docker,代码行数:49,代码来源:commands_test.go
示例6: TestRunDisconnectTty
// Expected behaviour: the process stay alive when the client disconnects
// but the client detaches.
func TestRunDisconnectTty(t *testing.T) {
stdin, stdinPipe := io.Pipe()
stdout, stdoutPipe := io.Pipe()
cli := api.NewDockerCli(stdin, stdoutPipe, ioutil.Discard, testDaemonProto, testDaemonAddr)
defer cleanup(globalEngine, t)
c1 := make(chan struct{})
go func() {
defer close(c1)
// We're simulating a disconnect so the return value doesn't matter. What matters is the
// fact that CmdRun returns.
if err := cli.CmdRun("-i", "-t", unitTestImageID, "/bin/cat"); err != nil {
utils.Debugf("Error CmdRun: %s", err)
}
}()
container := waitContainerStart(t, 10*time.Second)
state := setRaw(t, container)
defer unsetRaw(t, container, state)
// Client disconnect after run -i should keep stdin out in TTY mode
setTimeout(t, "Read/Write assertion timed out", 2*time.Second, func() {
if err := assertPipe("hello\n", "hello", stdout, stdinPipe, 150); err != nil {
t.Fatal(err)
}
})
// Close pipes (simulate disconnect)
if err := closeWrap(stdin, stdinPipe, stdout, stdoutPipe); err != nil {
t.Fatal(err)
}
// wait for CmdRun to return
setTimeout(t, "Waiting for CmdRun timed out", 5*time.Second, func() {
<-c1
})
// In tty mode, we expect the process to stay alive even after client's stdin closes.
// Give some time to monitor to do his thing
container.WaitTimeout(500 * time.Millisecond)
if !container.State.IsRunning() {
t.Fatalf("/bin/cat should still be running after closing stdin (tty mode)")
}
}
开发者ID:jhorey,项目名称:docker,代码行数:50,代码来源:commands_test.go
示例7: TestImagesTree
func TestImagesTree(t *testing.T) {
stdout, stdoutPipe := io.Pipe()
cli := api.NewDockerCli(nil, stdoutPipe, ioutil.Discard, testDaemonProto, testDaemonAddr)
defer cleanup(globalEngine, t)
image := buildTestImages(t, globalEngine)
c := make(chan struct{})
go func() {
defer close(c)
if err := cli.CmdImages("--tree"); err != nil {
t.Fatal(err)
}
stdoutPipe.Close()
}()
setTimeout(t, "Reading command output time out", 2*time.Second, func() {
cmdOutputBytes, err := ioutil.ReadAll(bufio.NewReader(stdout))
if err != nil {
t.Fatal(err)
}
cmdOutput := string(cmdOutputBytes)
regexpStrings := []string{
fmt.Sprintf("└─%s Virtual Size: \\d+.\\d+ MB Tags: %s:latest", unitTestImageIDShort, unitTestImageName),
"(?m) └─[0-9a-f]+.*",
"(?m) └─[0-9a-f]+.*",
"(?m) └─[0-9a-f]+.*",
fmt.Sprintf("(?m)^ └─%s Virtual Size: \\d+.\\d+ MB Tags: test:latest", utils.TruncateID(image.ID)),
}
compiledRegexps := []*regexp.Regexp{}
for _, regexpString := range regexpStrings {
regexp, err := regexp.Compile(regexpString)
if err != nil {
fmt.Println("Error in regex string: ", err)
return
}
compiledRegexps = append(compiledRegexps, regexp)
}
for _, regexp := range compiledRegexps {
if !regexp.MatchString(cmdOutput) {
t.Fatalf("images --tree content '%s' did not match regexp '%s'", cmdOutput, regexp)
}
}
})
}
开发者ID:jhorey,项目名称:docker,代码行数:48,代码来源:commands_test.go
示例8: TestRunCidFileCheckIDLength
// #2098 - Docker cidFiles only contain short version of the containerId
//sudo docker run --cidfile /tmp/docker_test.cid ubuntu echo "test"
// TestRunCidFile tests that run --cidfile returns the longid
func TestRunCidFileCheckIDLength(t *testing.T) {
stdout, stdoutPipe := io.Pipe()
tmpDir, err := ioutil.TempDir("", "TestRunCidFile")
if err != nil {
t.Fatal(err)
}
tmpCidFile := path.Join(tmpDir, "cid")
cli := api.NewDockerCli(nil, stdoutPipe, ioutil.Discard, testDaemonProto, testDaemonAddr)
defer cleanup(globalEngine, t)
c := make(chan struct{})
go func() {
defer close(c)
if err := cli.CmdRun("--cidfile", tmpCidFile, unitTestImageID, "ls"); err != nil {
t.Fatal(err)
}
}()
defer os.RemoveAll(tmpDir)
setTimeout(t, "Reading command output time out", 2*time.Second, func() {
cmdOutput, err := bufio.NewReader(stdout).ReadString('\n')
if err != nil {
t.Fatal(err)
}
if len(cmdOutput) < 1 {
t.Fatalf("'ls' should return something , not '%s'", cmdOutput)
}
//read the tmpCidFile
buffer, err := ioutil.ReadFile(tmpCidFile)
if err != nil {
t.Fatal(err)
}
id := string(buffer)
if len(id) != len("2bf44ea18873287bd9ace8a4cb536a7cbe134bed67e805fdf2f58a57f69b320c") {
t.Fatalf("--cidfile should be a long id, not '%s'", id)
}
//test that its a valid cid? (though the container is gone..)
//remove the file and dir.
})
setTimeout(t, "CmdRun timed out", 5*time.Second, func() {
<-c
})
}
开发者ID:jhorey,项目名称:docker,代码行数:51,代码来源:commands_test.go
示例9: TestCmdLogs
func TestCmdLogs(t *testing.T) {
t.Skip("Test not impemented")
cli := api.NewDockerCli(nil, ioutil.Discard, ioutil.Discard, testDaemonProto, testDaemonAddr)
defer cleanup(globalEngine, t)
if err := cli.CmdRun(unitTestImageID, "sh", "-c", "ls -l"); err != nil {
t.Fatal(err)
}
if err := cli.CmdRun("-t", unitTestImageID, "sh", "-c", "ls -l"); err != nil {
t.Fatal(err)
}
if err := cli.CmdLogs(globalRuntime.List()[0].ID); err != nil {
t.Fatal(err)
}
}
开发者ID:jhorey,项目名称:docker,代码行数:16,代码来源:commands_test.go
示例10: TestRunDetach
// TestRunDetach checks attaching and detaching with the escape sequence.
func TestRunDetach(t *testing.T) {
stdin, stdinPipe := io.Pipe()
stdout, stdoutPipe := io.Pipe()
cli := api.NewDockerCli(stdin, stdoutPipe, ioutil.Discard, testDaemonProto, testDaemonAddr)
defer cleanup(globalEngine, t)
ch := make(chan struct{})
go func() {
defer close(ch)
cli.CmdRun("-i", "-t", unitTestImageID, "cat")
}()
container := waitContainerStart(t, 10*time.Second)
state := setRaw(t, container)
defer unsetRaw(t, container, state)
setTimeout(t, "First read/write assertion timed out", 2*time.Second, func() {
if err := assertPipe("hello\n", "hello", stdout, stdinPipe, 150); err != nil {
t.Fatal(err)
}
})
setTimeout(t, "Escape sequence timeout", 5*time.Second, func() {
stdinPipe.Write([]byte{16})
time.Sleep(100 * time.Millisecond)
stdinPipe.Write([]byte{17})
})
// wait for CmdRun to return
setTimeout(t, "Waiting for CmdRun timed out", 15*time.Second, func() {
<-ch
})
closeWrap(stdin, stdinPipe, stdout, stdoutPipe)
time.Sleep(500 * time.Millisecond)
if !container.State.IsRunning() {
t.Fatal("The detached container should be still running")
}
setTimeout(t, "Waiting for container to die timed out", 20*time.Second, func() {
container.Kill()
})
}
开发者ID:jhorey,项目名称:docker,代码行数:47,代码来源:commands_test.go
示例11: TestRunWorkdirExistsAndIsFile
// TestRunWorkdirExistsAndIsFile checks that if 'docker run -w' with existing file can be detected
func TestRunWorkdirExistsAndIsFile(t *testing.T) {
cli := api.NewDockerCli(nil, nil, ioutil.Discard, testDaemonProto, testDaemonAddr, nil)
defer cleanup(globalEngine, t)
c := make(chan struct{})
go func() {
defer close(c)
if err := cli.CmdRun("-w", "/bin/cat", unitTestImageID, "pwd"); err == nil {
t.Fatal("should have failed to run when using /bin/cat as working dir.")
}
}()
setTimeout(t, "CmdRun timed out", 5*time.Second, func() {
<-c
})
}
开发者ID:jpgbus,项目名称:docker,代码行数:18,代码来源:commands_test.go
示例12: TestRunErrorBindNonExistingSource
// Expected behaviour: error out when attempting to bind mount non-existing source paths
func TestRunErrorBindNonExistingSource(t *testing.T) {
cli := api.NewDockerCli(nil, nil, ioutil.Discard, testDaemonProto, testDaemonAddr)
defer cleanup(globalEngine, t)
c := make(chan struct{})
go func() {
defer close(c)
// This check is made at runtime, can't be "unit tested"
if err := cli.CmdRun("-v", "/i/dont/exist:/tmp", unitTestImageID, "echo 'should fail'"); err == nil {
t.Fatal("should have failed to run when using /i/dont/exist as a source for the bind mount")
}
}()
setTimeout(t, "CmdRun timed out", 5*time.Second, func() {
<-c
})
}
开发者ID:jhorey,项目名称:docker,代码行数:19,代码来源:commands_test.go
示例13: TestRunWorkdirExists
// TestRunWorkdirExists checks that 'docker run -w' correctly sets a custom working directory, even if it exists
func TestRunWorkdirExists(t *testing.T) {
stdout, stdoutPipe := io.Pipe()
cli := api.NewDockerCli(nil, stdoutPipe, ioutil.Discard, testDaemonProto, testDaemonAddr)
defer cleanup(globalEngine, t)
c := make(chan struct{})
go func() {
defer close(c)
if err := cli.CmdRun("-w", "/proc", unitTestImageID, "pwd"); err != nil {
t.Fatal(err)
}
}()
setTimeout(t, "Reading command output time out", 2*time.Second, func() {
cmdOutput, err := bufio.NewReader(stdout).ReadString('\n')
if err != nil {
t.Fatal(err)
}
if cmdOutput != "/proc\n" {
t.Fatalf("'pwd' should display '%s', not '%s'", "/proc\n", cmdOutput)
}
})
container := globalRuntime.List()[0]
setTimeout(t, "CmdRun timed out", 5*time.Second, func() {
<-c
go func() {
cli.CmdWait(container.ID)
}()
if _, err := bufio.NewReader(stdout).ReadString('\n'); err != nil {
t.Fatal(err)
}
})
// Cleanup pipes
if err := closeWrap(stdout, stdoutPipe); err != nil {
t.Fatal(err)
}
}
开发者ID:jhorey,项目名称:docker,代码行数:44,代码来源:commands_test.go
示例14: TestRunDisconnect
// Expected behaviour: the process dies when the client disconnects
func TestRunDisconnect(t *testing.T) {
stdin, stdinPipe := io.Pipe()
stdout, stdoutPipe := io.Pipe()
cli := api.NewDockerCli(stdin, stdoutPipe, ioutil.Discard, testDaemonProto, testDaemonAddr)
defer cleanup(globalEngine, t)
c1 := make(chan struct{})
go func() {
// We're simulating a disconnect so the return value doesn't matter. What matters is the
// fact that CmdRun returns.
cli.CmdRun("-i", unitTestImageID, "/bin/cat")
close(c1)
}()
setTimeout(t, "Read/Write assertion timed out", 2*time.Second, func() {
if err := assertPipe("hello\n", "hello", stdout, stdinPipe, 150); err != nil {
t.Fatal(err)
}
})
// Close pipes (simulate disconnect)
if err := closeWrap(stdin, stdinPipe, stdout, stdoutPipe); err != nil {
t.Fatal(err)
}
// as the pipes are close, we expect the process to die,
// therefore CmdRun to unblock. Wait for CmdRun
setTimeout(t, "Waiting for CmdRun timed out", 2*time.Second, func() {
<-c1
})
// Client disconnect after run -i should cause stdin to be closed, which should
// cause /bin/cat to exit.
setTimeout(t, "Waiting for /bin/cat to exit timed out", 2*time.Second, func() {
container := globalRuntime.List()[0]
container.Wait()
if container.State.IsRunning() {
t.Fatalf("/bin/cat is still running after closing stdin")
}
})
}
开发者ID:jhorey,项目名称:docker,代码行数:44,代码来源:commands_test.go
示例15: TestRunAutoRemove
// Expected behaviour: container gets deleted automatically after exit
func TestRunAutoRemove(t *testing.T) {
t.Skip("Fixme. Skipping test for now, race condition")
stdout, stdoutPipe := io.Pipe()
cli := api.NewDockerCli(nil, stdoutPipe, ioutil.Discard, testDaemonProto, testDaemonAddr)
defer cleanup(globalEngine, t)
c := make(chan struct{})
go func() {
defer close(c)
if err := cli.CmdRun("--rm", unitTestImageID, "hostname"); err != nil {
t.Fatal(err)
}
}()
var temporaryContainerID string
setTimeout(t, "Reading command output time out", 2*time.Second, func() {
cmdOutput, err := bufio.NewReader(stdout).ReadString('\n')
if err != nil {
t.Fatal(err)
}
temporaryContainerID = cmdOutput
if err := closeWrap(stdout, stdoutPipe); err != nil {
t.Fatal(err)
}
})
setTimeout(t, "CmdRun timed out", 10*time.Second, func() {
<-c
})
time.Sleep(500 * time.Millisecond)
if len(globalRuntime.List()) > 0 {
t.Fatalf("failed to remove container automatically: container %s still exists", temporaryContainerID)
}
}
开发者ID:jhorey,项目名称:docker,代码行数:37,代码来源:commands_test.go
示例16: TestRunAttachStdin
// TestAttachStdin checks attaching to stdin without stdout and stderr.
// 'docker run -i -a stdin' should sends the client's stdin to the command,
// then detach from it and print the container id.
func TestRunAttachStdin(t *testing.T) {
stdin, stdinPipe := io.Pipe()
stdout, stdoutPipe := io.Pipe()
cli := api.NewDockerCli(stdin, stdoutPipe, ioutil.Discard, testDaemonProto, testDaemonAddr)
defer cleanup(globalEngine, t)
ch := make(chan struct{})
go func() {
defer close(ch)
cli.CmdRun("-i", "-a", "stdin", unitTestImageID, "sh", "-c", "echo hello && cat && sleep 5")
}()
// Send input to the command, close stdin
setTimeout(t, "Write timed out", 10*time.Second, func() {
if _, err := stdinPipe.Write([]byte("hi there\n")); err != nil {
t.Fatal(err)
}
if err := stdinPipe.Close(); err != nil {
t.Fatal(err)
}
})
container := globalRuntime.List()[0]
// Check output
setTimeout(t, "Reading command output time out", 10*time.Second, func() {
cmdOutput, err := bufio.NewReader(stdout).ReadString('\n')
if err != nil {
t.Fatal(err)
}
if cmdOutput != container.ID+"\n" {
t.Fatalf("Wrong output: should be '%s', not '%s'\n", container.ID+"\n", cmdOutput)
}
})
// wait for CmdRun to return
setTimeout(t, "Waiting for CmdRun timed out", 5*time.Second, func() {
<-ch
})
setTimeout(t, "Waiting for command to exit timed out", 10*time.Second, func() {
container.Wait()
})
// Check logs
if cmdLogs, err := container.ReadLog("json"); err != nil {
t.Fatal(err)
} else {
if output, err := ioutil.ReadAll(cmdLogs); err != nil {
t.Fatal(err)
} else {
expectedLogs := []string{"{\"log\":\"hello\\n\",\"stream\":\"stdout\"", "{\"log\":\"hi there\\n\",\"stream\":\"stdout\""}
for _, expectedLog := range expectedLogs {
if !strings.Contains(string(output), expectedLog) {
t.Fatalf("Unexpected logs: should contains '%s', it is not '%s'\n", expectedLog, output)
}
}
}
}
}
开发者ID:jhorey,项目名称:docker,代码行数:65,代码来源:commands_test.go
示例17: TestContainerOrphaning
func TestContainerOrphaning(t *testing.T) {
// setup a temporary directory
tmpDir, err := ioutil.TempDir("", "project")
if err != nil {
t.Fatal(err)
}
defer os.RemoveAll(tmpDir)
// setup a CLI and server
cli := api.NewDockerCli(nil, ioutil.Discard, ioutil.Discard, testDaemonProto, testDaemonAddr)
defer cleanup(globalEngine, t)
srv := mkServerFromEngine(globalEngine, t)
// closure to build something
buildSomething := func(template string, image string) string {
dockerfile := path.Join(tmpDir, "Dockerfile")
replacer := strings.NewReplacer("{IMAGE}", unitTestImageID)
contents := replacer.Replace(template)
ioutil.WriteFile(dockerfile, []byte(contents), 0x777)
if err := cli.CmdBuild("-t", image, tmpDir); err != nil {
t.Fatal(err)
}
img, err := srv.ImageInspect(image)
if err != nil {
t.Fatal(err)
}
return img.ID
}
// build an image
imageName := "orphan-test"
template1 := `
from {IMAGE}
cmd ["/bin/echo", "holla"]
`
img1 := buildSomething(template1, imageName)
// create a container using the fist image
if err := cli.CmdRun(imageName); err != nil {
t.Fatal(err)
}
// build a new image that splits lineage
template2 := `
from {IMAGE}
cmd ["/bin/echo", "holla"]
expose 22
`
buildSomething(template2, imageName)
// remove the second image by name
resp := engine.NewTable("", 0)
if err := srv.DeleteImage(imageName, resp, true, false, false); err == nil {
t.Fatal("Expected error, got none")
}
// see if we deleted the first image (and orphaned the container)
for _, i := range resp.Data {
if img1 == i.Get("Deleted") {
t.Fatal("Orphaned image with container")
}
}
}
开发者ID:jhorey,项目名称:docker,代码行数:65,代码来源:commands_test.go
示例18: TestCmdKill
func TestCmdKill(t *testing.T) {
var (
stdin, stdinPipe = io.Pipe()
stdout, stdoutPipe = io.Pipe()
cli = api.NewDockerCli(stdin, stdoutPipe, ioutil.Discard, testDaemonProto, testDaemonAddr)
cli2 = api.NewDockerCli(nil, ioutil.Discard, ioutil.Discard, testDaemonProto, testDaemonAddr)
)
defer cleanup(globalEngine, t)
ch := make(chan struct{})
go func() {
defer close(ch)
cli.CmdRun("-i", "-t", unitTestImageID, "sh", "-c", "trap 'echo SIGUSR1' USR1; trap 'echo SIGUSR2' USR2; echo Ready; while true; do read; done")
}()
container := waitContainerStart(t, 10*time.Second)
setTimeout(t, "Read Ready timed out", 3*time.Second, func() {
if err := expectPipe("Ready", stdout); err != nil {
t.Fatal(err)
}
})
setTimeout(t, "SIGUSR1 timed out", 2*time.Second, func() {
for i := 0; i < 10; i++ {
if err := cli2.CmdKill("-s", strconv.Itoa(int(syscall.SIGUSR1)), container.ID); err != nil {
t.Fatal(err)
}
if err := expectPipe("SIGUSR1", stdout); err != nil {
t.Fatal(err)
}
}
})
setTimeout(t, "SIGUSR2 timed out", 2*time.Second, func() {
for i := 0; i < 10; i++ {
if err := cli2.CmdKill("--signal=USR2", container.ID); err != nil {
t.Fatal(err)
}
if err := expectPipe("SIGUSR2", stdout); err != nil {
t.Fatal(err)
}
}
})
stdout.Close()
time.Sleep(500 * time.Millisecond)
if !container.State.IsRunning() {
t.Fatal("The container should be still running")
}
setTimeout(t, "Waiting for container timedout", 5*time.Second, func() {
if err := cli2.CmdKill(container.ID); err != nil {
t.Fatal(err)
}
<-ch
if err := cli2.CmdWait(container.ID); err != nil {
t.Fatal(err)
}
})
closeWrap(stdin, stdinPipe, stdout, stdoutPipe)
}
开发者ID:jhorey,项目名称:docker,代码行数:64,代码来源:commands_test.go
示例19: TestAttachDisconnect
// Expected behaviour, the process stays alive when the client disconnects
func TestAttachDisconnect(t *testing.T) {
stdin, stdinPipe := io.Pipe()
stdout, stdoutPipe := io.Pipe()
cli := api.NewDockerCli(stdin, stdoutPipe, ioutil.Discard, testDaemonProto, testDaemonAddr)
defer cleanup(globalEngine, t)
go func() {
// Start a process in daemon mode
if err := cli.CmdRun("-d", "-i", unitTestImageID, "/bin/cat"); err != nil {
utils.Debugf("Error CmdRun: %s", err)
}
}()
setTimeout(t, "Waiting for CmdRun timed out", 10*time.Second, func() {
if _, err := bufio.NewReader(stdout).ReadString('\n'); err != nil {
t.Fatal(err)
}
})
setTimeout(t, "Waiting for the container to be started timed out", 10*time.Second, func() {
for {
l := globalRuntime.List()
if len(l) == 1 && l[0].State.IsRunning() {
break
}
time.Sleep(10 * time.Millisecond)
}
})
container := globalRuntime.List()[0]
// Attach to it
c1 := make(chan struct{})
go func() {
// We're simulating a disconnect so the return value doesn't matter. What matters is the
// fact that CmdAttach returns.
cli.CmdAttach(container.ID)
close(c1)
}()
setTimeout(t, "First read/write assertion timed out", 2*time.Second, func() {
if err := assertPipe("hello\n", "hello", stdout, stdinPipe, 150); err != nil {
t.Fatal(err)
}
})
// Close pipes (client disconnects)
if err := closeWrap(stdin, stdinPipe, stdout, stdoutPipe); err != nil {
t.Fatal(err)
}
// Wait for attach to finish, the client disconnected, therefore, Attach finished his job
setTimeout(t, "Waiting for CmdAttach timed out", 2*time.Second, func() {
<-c1
})
// We closed stdin, expect /bin/cat to still be running
// Wait a little bit to make sure container.monitor() did his thing
err := container.WaitTimeout(500 * time.Millisecond)
if err == nil || !container.State.IsRunning() {
t.Fatalf("/bin/cat is not running after closing stdin")
}
// Try to avoid the timeout in destroy. Best effort, don't check error
cStdin, _ := container.StdinPipe()
cStdin.Close()
container.Wait()
}
开发者ID:jhorey,项目名称:docker,代码行数:69,代码来源:commands_test.go
示例20: TestAttachDetach
// TestAttachDetach checks that attach in tty mode can be detached using the long container ID
func TestAttachDetach(t *testing.T) {
stdin, stdinPipe := io.Pipe()
stdout, stdoutPipe := io.Pipe()
cli := api.NewDockerCli(stdin, stdoutPipe, ioutil.Discard, testDaemonProto, testDaemonAddr)
defer cleanup(globalEngine, t)
ch := make(chan struct{})
go func() {
defer close(ch)
if err := cli.CmdRun("-i", "-t", "-d", unitTestImageID, "cat"); err != nil {
t.Fatal(err)
}
}()
container := waitContainerStart(t, 10*time.Second)
setTimeout(t, "Reading container's id timed out", 10*time.Second, func() {
buf := make([]byte, 1024)
n, err := stdout.Read(buf)
if err != nil {
t.Fatal(err)
}
if strings.Trim(string(buf[:n]), " \r\n") != container.ID {
t.Fatalf("Wrong ID received. Expect %s, received %s", container.ID, buf[:n])
}
})
setTimeout(t, "Starting container timed out", 10*time.Second, func() {
<-ch
})
state := setRaw(t, container)
defer unsetRaw(t, container, state)
stdin, stdinPipe = io.Pipe()
stdout, stdoutPipe = io.Pipe()
cli = api.NewDockerCli(stdin, stdoutPipe, ioutil.Discard, testDaemonProto, testDaemonAddr)
ch = make(chan struct{})
go func() {
defer close(ch)
if err := cli.CmdAttach(container.ID); err != nil {
if err != io.ErrClosedPipe {
t.Fatal(err)
}
}
}()
setTimeout(t, "First read/write assertion timed out", 2*time.Second, func() {
if err := assertPipe("hello\n", "hello", stdout, stdinPipe, 150); err != nil {
if err != io.ErrClosedPipe {
t.Fatal(err)
}
}
})
setTimeout(t, "Escape sequence timeout", 5*time.Second, func() {
stdinPipe.Write([]byte{16})
time.Sleep(100 * time.Millisecond)
stdinPipe.Write([]byte{17})
})
// wait for CmdRun to return
setTimeout(t, "Waiting for CmdAttach timed out", 15*time.Second, func() {
<-ch
})
closeWrap(stdin, stdinPipe, stdout, stdoutPipe)
time.Sleep(500 * time.Millisecond)
if !container.State.IsRunning() {
t.Fatal("The detached container should be still running")
}
setTimeout(t, "Waiting for container to die timedout", 5*time.Second, func() {
container.Kill()
})
}
开发者ID:jhorey,项目名称:docker,代码行数:80,代码来源:commands_test.go
注:本文中的github.com/dotcloud/docker/api.NewDockerCli函数示例整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论