Golang assert.Ok函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Golang中github.com/eleme/banshee/util/assert.Ok函数的典型用法代码示例。如果您正苦于以下问题：Golang Ok函数的具体用法？Golang Ok怎么用？Golang Ok使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了Ok函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Golang代码示例。

示例1: TestAnomalyAfterBigAnomaly

// Case anomaly after an anomaly.
func TestAnomalyAfterBigAnomaly(t *testing.T) {
	wf := 0.05
	leastC := 18
	c := New(wf, leastC)
	l := genMetrics(120.0, 140.0, 100)
	var s *models.State
	for _, m := range l {
		s = c.Next(s, m)
		assert.Ok(t, !m.IsAnomalous())
	}
	// Give a big anomaly
	m := &models.Metric{Value: 2000}
	s = c.Next(s, m)
	assert.Ok(t, m.IsAnomalousTrendUp())
	// Test up and down anomaly
	m = &models.Metric{Value: 190}
	s = c.Next(s, m)
	assert.Ok(t, m.IsAnomalousTrendUp())
	m = &models.Metric{Value: 80}
	s = c.Next(s, m)
	assert.Ok(t, m.IsAnomalousTrendDown())
	// Test normal
	m = &models.Metric{Value: 130}
	s = c.Next(s, m)
	assert.Ok(t, !m.IsAnomalous())
}

开发者ID:nrzipher，项目名称:banshee，代码行数:27，代码来源:cursor_test.go

示例2: TestToFixed

func TestToFixed(t *testing.T) {
	assert.Ok(t, ToFixed(1.2345, 2) == "1.23")
	assert.Ok(t, ToFixed(10000.12121121, 5) == "10000.12121")
	assert.Ok(t, ToFixed(102, 3) == "102")
	assert.Ok(t, ToFixed(102.22, 3) == "102.22")
	assert.Ok(t, ToFixed(100, 3) == "100")
}

开发者ID:orthogonous，项目名称:banshee，代码行数:7，代码来源:util_test.go

示例3: TestPut

func TestPut(t *testing.T) {
	// Open db.
	fileName := "db-testing"
	db, _ := Open(fileName)
	defer os.RemoveAll(fileName)
	defer db.Close()
	// Put.
	m := &models.Metric{
		Name:    "foo",
		Stamp:   1452758773,
		Value:   3.14,
		Score:   0.1892,
		Average: 3.133,
	}
	err := db.Put(m)
	assert.Ok(t, err == nil)
	// Must in db
	key := encodeKey(m)
	value, err := db.db.Get(key, nil)
	assert.Ok(t, err == nil)
	m1 := &models.Metric{
		Name:  m.Name,
		Stamp: m.Stamp,
	}
	err = decodeValue(value, m1)
	assert.Ok(t, err == nil)
	assert.Ok(t, reflect.DeepEqual(m, m1))
}

开发者ID:hit9，项目名称:banshee，代码行数:28，代码来源:db_test.go

示例4: TestHitLimit

func TestHitLimit(t *testing.T) {
	// Currently disable logging
	log.Disable()
	defer log.Enable()
	//New and add rules.
	config := config.New()
	config.Interval = 1
	rule1 := &models.Rule{Pattern: "a.*.c.d"}
	filter := New()
	filter.addRule(rule1)
	filter.SetHitLimit(config)

	for i := 0; i < config.Detector.IntervalHitLimit; i++ {
		//hit rule when counter < intervalHitLimit
		rules := filter.MatchedRules(&models.Metric{Name: "a.b.c.d"})
		assert.Ok(t, 1 == len(rules))

	}
	//counter over limit, matched rules = 0
	rules := filter.MatchedRules(&models.Metric{Name: "a.b.c.d"})
	assert.Ok(t, 0 == len(rules))
	time.Sleep(time.Second * 2)
	//after interval counter is cleared, matched rules = 1
	rules = filter.MatchedRules(&models.Metric{Name: "a.b.c.d"})
	assert.Ok(t, 1 == len(rules))
}

开发者ID:hit9，项目名称:banshee，代码行数:26，代码来源:filter_test.go

示例5: TestExampleConfigParsing

func TestExampleConfigParsing(t *testing.T) {
	config := New()
	err := config.UpdateWithJSONFile("./exampleConfig.json")
	assert.Ok(t, err == nil)
	defaults := New()
	assert.Ok(t, reflect.DeepEqual(config, defaults))
}

开发者ID:nrzipher，项目名称:banshee，代码行数:7，代码来源:config_test.go

示例6: TestDecodeKey

func TestDecodeKey(t *testing.T) {
	key := []byte("foo000001f")
	m := &models.Metric{}
	err := decodeKey(key, m)
	assert.Ok(t, err == nil)
	assert.Ok(t, m.Name == "foo")
	assert.Ok(t, m.Stamp == 36+0xf+horizon)
}

开发者ID:nrzipher，项目名称:banshee，代码行数:8，代码来源:encoding_test.go

示例7: TestOpen

func TestOpen(t *testing.T) {
	fileName := "db-testing"
	db, err := Open(fileName)
	assert.Ok(t, err == nil)
	assert.Ok(t, util.IsFileExist(fileName))
	db.Close()
	os.RemoveAll(fileName)
}

开发者ID:hit9，项目名称:banshee，代码行数:8，代码来源:db_test.go

示例8: TestParseMetric

func TestParseMetric(t *testing.T) {
	line := "foo 1449655769 3.14"
	m, err := parseMetric(line)
	assert.Ok(t, err == nil)
	assert.Ok(t, m.Name == "foo")
	assert.Ok(t, m.Stamp == uint32(1449655769))
	assert.Ok(t, m.Value == 3.14)
}

开发者ID:nrzipher，项目名称:banshee，代码行数:8，代码来源:protocol_test.go

示例9: TestOpen

func TestOpen(t *testing.T) {
	fileName := "db-testing"
	db, err := Open(fileName, &Options{288, 300})
	defer db.Close()
	defer os.RemoveAll(fileName)
	assert.Ok(t, err == nil)
	assert.Ok(t, util.IsFileExist(fileName))
}

开发者ID:nrzipher，项目名称:banshee，代码行数:8，代码来源:db_test.go

示例10: TestDecodeValue

func TestDecodeValue(t *testing.T) {
	m := &models.Metric{}
	value := []byte("1.23:0.72:0.79")
	err := decodeValue(value, m)
	assert.Ok(t, err == nil)
	assert.Ok(t, m.Value == 1.23)
	assert.Ok(t, m.Score == 0.72)
	assert.Ok(t, m.Average == 0.79)
}

开发者ID:nrzipher，项目名称:banshee，代码行数:9，代码来源:encoding_test.go

示例11: TestDecode

func TestDecode(t *testing.T) {
	s := "1450422576:1.2:3.1"
	idx := &models.Index{}
	err := decode([]byte(s), idx)
	assert.Ok(t, err == nil)
	assert.Ok(t, idx.Stamp == 1450422576)
	assert.Ok(t, idx.Score == 1.2)
	assert.Ok(t, idx.Average == 3.1)
}

开发者ID:nrzipher，项目名称:banshee，代码行数:9，代码来源:encoding_test.go

示例12: TestStampLenEnoughToUse

func TestStampLenEnoughToUse(t *testing.T) {
	stamp := uint32(90*365*24*60*60) + horizon
	m := &models.Metric{Name: "foo", Stamp: stamp}
	key := encodeKey(m)
	n := &models.Metric{}
	err := decodeKey(key, n)
	assert.Ok(t, err == nil)
	assert.Ok(t, n.Name == m.Name)
	assert.Ok(t, n.Stamp == m.Stamp)
}

开发者ID:nrzipher，项目名称:banshee，代码行数:10，代码来源:encoding_test.go

示例13: TestMakeEventID

func TestMakeEventID(t *testing.T) {
	// Metric with the same name but different stamps.
	m1 := &models.Metric{Name: "foo", Stamp: 1456815973}
	m2 := &models.Metric{Name: "foo", Stamp: 1456815974}
	assert.Ok(t, makeEventID(m1) != makeEventID(m2))
	// Metric with the same stamp but different names.
	m1 = &models.Metric{Name: "foo", Stamp: 1456815973}
	m2 = &models.Metric{Name: "bar", Stamp: 1456815973}
	assert.Ok(t, makeEventID(m1) != makeEventID(m2))
}

开发者ID:hit9，项目名称:banshee，代码行数:10，代码来源:alerter_test.go

示例14: TestGenerateID

func TestGenerateID(t *testing.T) {
	// Metric with the same name but different stamps.
	ev1 := NewEvent(&Metric{Name: "foo", Stamp: 1456815973}, nil)
	ev2 := NewEvent(&Metric{Name: "foo", Stamp: 1456815974}, nil)
	assert.Ok(t, ev1.ID != ev2.ID)
	// Metric with the same stamp but different names.
	ev1 = NewEvent(&Metric{Name: "foo", Stamp: 1456815973}, nil)
	ev2 = NewEvent(&Metric{Name: "bar", Stamp: 1456815973}, nil)
	assert.Ok(t, ev1.ID != ev2.ID)
}

开发者ID:yoyojacky，项目名称:banshee，代码行数:10，代码来源:event_test.go

示例15: TestEncoding

func TestEncoding(t *testing.T) {
	idx := &models.Index{Stamp: 1450426828, Score: 0.678888, Average: 877.234}
	value := encode(idx)
	idx1 := &models.Index{}
	err := decode(value, idx1)
	assert.Ok(t, err == nil)
	assert.Ok(t, idx1.Stamp == idx.Stamp)
	assert.Ok(t, idx1.Score == 0.67889)
	assert.Ok(t, idx1.Average == 877.234)
}

开发者ID:nrzipher，项目名称:banshee，代码行数:10，代码来源:encoding_test.go

示例16: TestNotEnough

// Case count not enough
func TestNotEnough(t *testing.T) {
	wf := 0.05
	leastC := 18
	c := New(wf, leastC)
	s := &models.State{Count: leastC - 1, Average: 0.1, StdDev: 0.1}
	m := &models.Metric{Value: 0.1}
	n := c.Next(s, m)
	assert.Ok(t, m.Score == 0)
	assert.Ok(t, n.Count == leastC)
}

开发者ID:nrzipher，项目名称:banshee，代码行数:11，代码来源:cursor_test.go

示例17: TestAsFirst

// Case as first
func TestAsFirst(t *testing.T) {
	wf := 0.05
	leastC := 18
	c := New(wf, leastC)
	m := &models.Metric{Value: 1.32}
	s := c.Next(nil, m)
	assert.Ok(t, m.Average == m.Value)
	assert.Ok(t, m.Score == 0)
	assert.Ok(t, s.Count == 1)
	assert.Ok(t, s.StdDev == 0)
}

开发者ID:nrzipher，项目名称:banshee，代码行数:12，代码来源:cursor_test.go

示例18: TestValueEncoding

func TestValueEncoding(t *testing.T) {
	// New DB just for testing
	db := &DB{numGrid: 288, gridLen: 300}
	// Test
	s := &models.State{Average: 182.092, StdDev: 1.3, Count: 18}
	value := db.encodeValue(s)
	n, err := db.decodeValue(value)
	assert.Ok(t, err == nil)
	assert.Ok(t, n.Average == s.Average)
	assert.Ok(t, n.StdDev == s.StdDev)
	assert.Ok(t, n.Count == s.Count)
}

开发者ID:nrzipher，项目名称:banshee，代码行数:12，代码来源:encoding_test.go

示例19: TestEncodeKey

func TestEncodeKey(t *testing.T) {
	// New DB just for testing
	db := &DB{numGrid: 288, gridLen: 300}
	period := db.numGrid * db.gridLen
	// Test
	m := &models.Metric{Name: "foo", Stamp: 1450429041}
	gridNo := db.getGridNo(m)
	s := fmt.Sprintf("foo:%d", gridNo)
	assert.Ok(t, s == string(db.encodeKey(m)))
	m.Stamp += uint32(period)
	assert.Ok(t, s == string(db.encodeKey(m)))
}

开发者ID:nrzipher，项目名称:banshee，代码行数:12，代码来源:encoding_test.go

示例20: TestRuleBuildRepr

func TestRuleBuildRepr(t *testing.T) {
	var rule *Rule
	// TrendUp
	rule = &Rule{TrendUp: true}
	rule.BuildRepr()
	assert.Ok(t, rule.Repr == "trend ↑")
	// TrendDown
	rule = &Rule{TrendDown: true}
	rule.BuildRepr()
	assert.Ok(t, rule.Repr == "trend ↓")
	// TrendUp Or TrendDown
	rule = &Rule{TrendUp: true, TrendDown: true}
	rule.BuildRepr()
	assert.Ok(t, rule.Repr == "trend ↑ || trend ↓")
	// Value >= X
	rule = &Rule{ThresholdMax: 3.1478}
	rule.BuildRepr()
	assert.Ok(t, rule.Repr == "value >= 3.148")
	// Value <= X
	rule = &Rule{ThresholdMin: 3.1478}
	rule.BuildRepr()
	assert.Ok(t, rule.Repr == "value <= 3.148")
	// TrendUp and Value >= X
	rule = &Rule{TrendUp: true, ThresholdMax: 1.29}
	rule.BuildRepr()
	assert.Ok(t, rule.Repr == "(trend ↑ && value >= 1.29)")
	// (TrendUp And Value >= X) Or TrendDown
	rule = &Rule{TrendDown: true, TrendUp: true, ThresholdMax: 2223.8}
	rule.BuildRepr()
	assert.Ok(t, rule.Repr == "(trend ↑ && value >= 2223.8) || trend ↓")
	// (TrendUp And Value >= X) Or (TrendDown And Value <= X)
	rule = &Rule{TrendUp: true, ThresholdMax: 18987, TrendDown: true, ThresholdMin: 781}
	rule.BuildRepr()
	assert.Ok(t, rule.Repr == "(trend ↑ && value >= 18987) || (trend ↓ && value <= 781)")
}

开发者ID:orthogonous，项目名称:banshee，代码行数:35，代码来源:rule_test.go

注：本文中的github.com/eleme/banshee/util/assert.Ok函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。