Golang clientcmd.WriteToFile函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Golang中github.com/GoogleCloudPlatform/kubernetes/pkg/client/clientcmd.WriteToFile函数的典型用法代码示例。如果您正苦于以下问题：Golang WriteToFile函数的具体用法？Golang WriteToFile怎么用？Golang WriteToFile使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了WriteToFile函数的13个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Golang代码示例。

示例1: writePreferences

func writePreferences(configAccess ConfigAccess, newPrefs clientcmdapi.Preferences) error {
	if startingConfig, err := configAccess.GetStartingConfig(); err != nil {
		return err
	} else if reflect.DeepEqual(startingConfig.Preferences, newPrefs) {
		return nil
	}

	if configAccess.IsExplicitFile() {
		file := configAccess.GetExplicitFile()
		currConfig := getConfigFromFileOrDie(file)
		currConfig.Preferences = newPrefs
		if err := clientcmd.WriteToFile(*currConfig, file); err != nil {
			return err
		}

		return nil
	}

	for _, file := range configAccess.GetLoadingPrecedence() {
		currConfig := getConfigFromFileOrDie(file)

		if !reflect.DeepEqual(currConfig.Preferences, newPrefs) {
			currConfig.Preferences = newPrefs
			if err := clientcmd.WriteToFile(*currConfig, file); err != nil {
				return err
			}

			return nil
		}
	}

	return errors.New("no config found to write preferences")
}

开发者ID:chenzhen411，项目名称:kubernetes，代码行数:33，代码来源:config.go

示例2: writeCurrentContext

// writeCurrentContext takes three possible paths.
// If newCurrentContext is the same as the startingConfig's current context, then we exit.
// If newCurrentContext has a value, then that value is written into the default destination file.
// If newCurrentContext is empty, then we find the config file that is setting the CurrentContext and clear the value from that file
func writeCurrentContext(configAccess ConfigAccess, newCurrentContext string) error {
	if startingConfig, err := configAccess.GetStartingConfig(); err != nil {
		return err
	} else if startingConfig.CurrentContext == newCurrentContext {
		return nil
	}

	if configAccess.IsExplicitFile() {
		file := configAccess.GetExplicitFile()
		currConfig := getConfigFromFileOrDie(file)
		currConfig.CurrentContext = newCurrentContext
		if err := clientcmd.WriteToFile(*currConfig, file); err != nil {
			return err
		}

		return nil
	}

	if len(newCurrentContext) > 0 {
		destinationFile := configAccess.GetDefaultFilename()
		config := getConfigFromFileOrDie(destinationFile)
		config.CurrentContext = newCurrentContext

		if err := clientcmd.WriteToFile(*config, destinationFile); err != nil {
			return err
		}

		return nil
	}

	// we're supposed to be clearing the current context.  We need to find the first spot in the chain that is setting it and clear it
	for _, file := range configAccess.GetLoadingPrecedence() {
		if _, err := os.Stat(file); err == nil {
			currConfig := getConfigFromFileOrDie(file)

			if len(currConfig.CurrentContext) > 0 {
				currConfig.CurrentContext = newCurrentContext
				if err := clientcmd.WriteToFile(*currConfig, file); err != nil {
					return err
				}

				return nil
			}
		}
	}

	return errors.New("no config found to write context")
}

开发者ID:chenzhen411，项目名称:kubernetes，代码行数:52，代码来源:config.go

示例3: run

func (o createClusterOptions) run() error {
	err := o.validate()
	if err != nil {
		return err
	}

	config, filename, err := o.pathOptions.getStartingConfig()
	if err != nil {
		return err
	}

	if config.Clusters == nil {
		config.Clusters = make(map[string]clientcmdapi.Cluster)
	}

	cluster := o.modifyCluster(config.Clusters[o.name])
	config.Clusters[o.name] = cluster

	err = clientcmd.WriteToFile(*config, filename)
	if err != nil {
		return err
	}

	return nil
}

开发者ID:vrosnet，项目名称:kubernetes，代码行数:25，代码来源:create_cluster.go

示例4: run

func (o setOptions) run() error {
	err := o.validate()
	if err != nil {
		return err
	}

	config, filename, err := o.pathOptions.getStartingConfig()
	if err != nil {
		return err
	}

	if len(filename) == 0 {
		return errors.New("cannot set property without using a specific file")
	}

	steps, err := newNavigationSteps(o.propertyName)
	if err != nil {
		return err
	}
	err = modifyConfig(reflect.ValueOf(config), steps, o.propertyValue, false)
	if err != nil {
		return err
	}

	err = clientcmd.WriteToFile(*config, filename)
	if err != nil {
		return err
	}

	return nil
}

开发者ID:vrosnet，项目名称:kubernetes，代码行数:31，代码来源:set.go

示例5: ChangeUser

// ChangeUser changes the user used by the current CLI session.
func (c *CLI) ChangeUser(name string) *CLI {
	adminClientConfig, err := testutil.GetClusterAdminClientConfig(c.adminConfigPath)
	if err != nil {
		FatalErr(err)
	}
	_, _, clientConfig, err := testutil.GetClientForUser(*adminClientConfig, name)
	if err != nil {
		FatalErr(err)
	}

	kubeConfig, err := config.CreateConfig(c.Namespace(), clientConfig)
	if err != nil {
		FatalErr(err)
	}

	c.configPath = filepath.Join(c.outputDir, name+".kubeconfig")
	err = clientcmd.WriteToFile(*kubeConfig, c.configPath)
	if err != nil {
		FatalErr(err)
	}

	c.username = name
	fmt.Printf("INFO: configPath is now %q\n", c.configPath)
	return c
}

开发者ID:paulheideman，项目名称:origin，代码行数:26，代码来源:cli.go

示例6: run

func (o unsetOptions) run() error {
	err := o.validate()
	if err != nil {
		return err
	}

	config, filename, err := o.pathOptions.getStartingConfig()
	if err != nil {
		return err
	}

	if len(filename) == 0 {
		return errors.New("cannot set property without using a specific file")
	}

	parts := strings.Split(o.propertyName, ".")
	err = modifyConfig(reflect.ValueOf(config), parts, "", true)
	if err != nil {
		return err
	}

	err = clientcmd.WriteToFile(*config, filename)
	if err != nil {
		return err
	}

	return nil
}

开发者ID:hortonworks，项目名称:kubernetes-yarn，代码行数:28，代码来源:unset.go

示例7: writeClientConfigToKubeConfig

func writeClientConfigToKubeConfig(config kclient.Config, path string) error {
	kubeConfig := &clientcmdapi.Config{
		Clusters:       map[string]clientcmdapi.Cluster{"myserver": {Server: config.Host, CertificateAuthority: config.CAFile, CertificateAuthorityData: config.CAData}},
		AuthInfos:      map[string]clientcmdapi.AuthInfo{"myuser": {Token: config.BearerToken}},
		Contexts:       map[string]clientcmdapi.Context{"mycontext": {Cluster: "myserver", AuthInfo: "myuser"}},
		CurrentContext: "mycontext",
	}
	if err := os.MkdirAll(filepath.Dir(path), os.FileMode(0755)); err != nil {
		return err
	}
	if err := clientcmd.WriteToFile(*kubeConfig, path); err != nil {
		return err
	}
	return nil
}

开发者ID:pombredanne，项目名称:atomic-enterprise，代码行数:15，代码来源:service_account_test.go

示例8: testConfigCommand

func testConfigCommand(args []string, startingConfig clientcmdapi.Config) (string, clientcmdapi.Config) {
	fakeKubeFile, _ := ioutil.TempFile("", "")
	defer os.Remove(fakeKubeFile.Name())
	clientcmd.WriteToFile(startingConfig, fakeKubeFile.Name())

	argsToUse := make([]string, 0, 2+len(args))
	argsToUse = append(argsToUse, "--kubeconfig="+fakeKubeFile.Name())
	argsToUse = append(argsToUse, args...)

	buf := bytes.NewBuffer([]byte{})

	cmd := NewCmdConfig(NewDefaultPathOptions(), buf)
	cmd.SetArgs(argsToUse)
	cmd.Execute()

	// outBytes, _ := ioutil.ReadFile(fakeKubeFile.Name())
	config := getConfigFromFileOrDie(fakeKubeFile.Name())

	return buf.String(), *config
}

开发者ID:RadiusIntelligence，项目名称:kubernetes，代码行数:20，代码来源:config_test.go

示例9: run

func (o createContextOptions) run() error {
	err := o.validate()
	if err != nil {
		return err
	}

	config, filename, err := o.pathOptions.getStartingConfig()
	if err != nil {
		return err
	}

	context := o.modifyContext(config.Contexts[o.name])
	config.Contexts[o.name] = context

	err = clientcmd.WriteToFile(*config, filename)
	if err != nil {
		return err
	}

	return nil
}

开发者ID:vrosnet，项目名称:kubernetes，代码行数:21，代码来源:create_context.go

示例10: run

func (o createAuthInfoOptions) run() error {
	err := o.validate()
	if err != nil {
		return err
	}

	config, filename, err := o.pathOptions.getStartingConfig()
	if err != nil {
		return err
	}

	authInfo := o.authInfo()
	config.AuthInfos[o.name] = authInfo

	err = clientcmd.WriteToFile(*config, filename)
	if err != nil {
		return err
	}

	return nil
}

开发者ID:hortonworks，项目名称:kubernetes-yarn，代码行数:21，代码来源:create_authinfo.go

示例11: run

func (o useContextOptions) run() error {
	err := o.validate()
	if err != nil {
		return err
	}

	config, filename, err := o.pathOptions.getStartingConfig()
	if err != nil {
		return err
	}

	if len(filename) == 0 {
		return errors.New("cannot set current-context without using a specific file")
	}

	config.CurrentContext = o.contextName

	err = clientcmd.WriteToFile(*config, filename)
	if err != nil {
		return err
	}

	return nil
}

开发者ID:hortonworks，项目名称:kubernetes-yarn，代码行数:24，代码来源:use_context.go

示例12: CreateKubeConfig

func (o CreateKubeConfigOptions) CreateKubeConfig() (*clientcmdapi.Config, error) {
	glog.V(4).Infof("creating a .kubeconfig with: %#v", o)

	// read all the referenced filenames
	caData, err := ioutil.ReadFile(o.APIServerCAFile)
	if err != nil {
		return nil, err
	}
	certData, err := ioutil.ReadFile(o.CertFile)
	if err != nil {
		return nil, err
	}
	keyData, err := ioutil.ReadFile(o.KeyFile)
	if err != nil {
		return nil, err
	}
	certConfig, err := crypto.GetTLSCertificateConfig(o.CertFile, o.KeyFile)
	if err != nil {
		return nil, err
	}

	// determine all the nicknames
	clusterNick, err := cliconfig.GetClusterNicknameFromURL(o.APIServerURL)
	if err != nil {
		return nil, err
	}
	userNick, err := cliconfig.GetUserNicknameFromCert(clusterNick, certConfig.Certs...)
	if err != nil {
		return nil, err
	}
	contextNick, err := cliconfig.GetContextNickname(o.ContextNamespace, clusterNick, userNick)
	if err != nil {
		return nil, err
	}

	credentials := make(map[string]clientcmdapi.AuthInfo)
	credentials[userNick] = clientcmdapi.AuthInfo{
		ClientCertificateData: certData,
		ClientKeyData:         keyData,
	}

	clusters := make(map[string]clientcmdapi.Cluster)
	clusters[clusterNick] = clientcmdapi.Cluster{
		Server: o.APIServerURL,
		CertificateAuthorityData: caData,
	}

	contexts := make(map[string]clientcmdapi.Context)
	contexts[contextNick] = clientcmdapi.Context{Cluster: clusterNick, AuthInfo: userNick, Namespace: o.ContextNamespace}

	createPublic := (len(o.PublicAPIServerURL) > 0) && o.APIServerURL != o.PublicAPIServerURL
	if createPublic {
		publicClusterNick, err := cliconfig.GetClusterNicknameFromURL(o.PublicAPIServerURL)
		if err != nil {
			return nil, err
		}
		publicContextNick, err := cliconfig.GetContextNickname(o.ContextNamespace, publicClusterNick, userNick)
		if err != nil {
			return nil, err
		}

		clusters[publicClusterNick] = clientcmdapi.Cluster{
			Server: o.PublicAPIServerURL,
			CertificateAuthorityData: caData,
		}
		contexts[publicContextNick] = clientcmdapi.Context{Cluster: publicClusterNick, AuthInfo: userNick, Namespace: o.ContextNamespace}
	}

	kubeConfig := &clientcmdapi.Config{
		Clusters:       clusters,
		AuthInfos:      credentials,
		Contexts:       contexts,
		CurrentContext: contextNick,
	}

	glog.V(3).Infof("Generating '%s' API client config as %s\n", userNick, o.KubeConfigFile)
	// Ensure the parent dir exists
	if err := os.MkdirAll(filepath.Dir(o.KubeConfigFile), os.FileMode(0755)); err != nil {
		return nil, err
	}
	if err := clientcmd.WriteToFile(*kubeConfig, o.KubeConfigFile); err != nil {
		return nil, err
	}

	return kubeConfig, nil
}

开发者ID:cjnygard，项目名称:origin，代码行数:86，代码来源:create_kubeconfig.go

示例13: ModifyConfig

// ModifyConfig takes a Config object, iterates through Clusters, AuthInfos, and Contexts, uses the LocationOfOrigin if specified or
// uses the default destination file to write the results into.  This results in multiple file reads, but it's very easy to follow.
// Preferences and CurrentContext should always be set in the default destination file.  Since we can't distinguish between empty and missing values
// (no nil strings), we're forced have separate handling for them.  In the kubeconfig cases, newConfig should have at most one difference,
// that means that this code will only write into a single file.
func ModifyConfig(configAccess ConfigAccess, newConfig clientcmdapi.Config) error {
	startingConfig, err := configAccess.GetStartingConfig()
	if err != nil {
		return err
	}

	// We need to find all differences, locate their original files, read a partial config to modify only that stanza and write out the file.
	// Special case the test for current context and preferences since those always write to the default file.
	if reflect.DeepEqual(*startingConfig, newConfig) {
		// nothing to do
		return nil
	}

	if startingConfig.CurrentContext != newConfig.CurrentContext {
		if err := writeCurrentContext(configAccess, newConfig.CurrentContext); err != nil {
			return err
		}
	}

	if !reflect.DeepEqual(startingConfig.Preferences, newConfig.Preferences) {
		if err := writePreferences(configAccess, newConfig.Preferences); err != nil {
			return err
		}
	}

	// Search every cluster, authInfo, and context.  First from new to old for differences, then from old to new for deletions
	for key, cluster := range newConfig.Clusters {
		startingCluster, exists := startingConfig.Clusters[key]
		if !reflect.DeepEqual(cluster, startingCluster) || !exists {
			destinationFile := cluster.LocationOfOrigin
			if len(destinationFile) == 0 {
				destinationFile = configAccess.GetDefaultFilename()
			}

			configToWrite := getConfigFromFileOrDie(destinationFile)
			configToWrite.Clusters[key] = cluster

			if err := clientcmd.WriteToFile(*configToWrite, destinationFile); err != nil {
				return err
			}
		}
	}

	for key, context := range newConfig.Contexts {
		startingContext, exists := startingConfig.Contexts[key]
		if !reflect.DeepEqual(context, startingContext) || !exists {
			destinationFile := context.LocationOfOrigin
			if len(destinationFile) == 0 {
				destinationFile = configAccess.GetDefaultFilename()
			}

			configToWrite := getConfigFromFileOrDie(destinationFile)
			configToWrite.Contexts[key] = context

			if err := clientcmd.WriteToFile(*configToWrite, destinationFile); err != nil {
				return err
			}
		}
	}

	for key, authInfo := range newConfig.AuthInfos {
		startingAuthInfo, exists := startingConfig.AuthInfos[key]
		if !reflect.DeepEqual(authInfo, startingAuthInfo) || !exists {
			destinationFile := authInfo.LocationOfOrigin
			if len(destinationFile) == 0 {
				destinationFile = configAccess.GetDefaultFilename()
			}

			configToWrite := getConfigFromFileOrDie(destinationFile)
			configToWrite.AuthInfos[key] = authInfo

			if err := clientcmd.WriteToFile(*configToWrite, destinationFile); err != nil {
				return err
			}
		}
	}

	for key, cluster := range startingConfig.Clusters {
		if _, exists := newConfig.Clusters[key]; !exists {
			destinationFile := cluster.LocationOfOrigin
			if len(destinationFile) == 0 {
				destinationFile = configAccess.GetDefaultFilename()
			}

			configToWrite := getConfigFromFileOrDie(destinationFile)
			delete(configToWrite.Clusters, key)

			if err := clientcmd.WriteToFile(*configToWrite, destinationFile); err != nil {
				return err
			}
		}
	}

	for key, context := range startingConfig.Contexts {
		if _, exists := newConfig.Contexts[key]; !exists {
//.........这里部分代码省略.........

开发者ID:chenzhen411，项目名称:kubernetes，代码行数:101，代码来源:config.go

注：本文中的github.com/GoogleCloudPlatform/kubernetes/pkg/client/clientcmd.WriteToFile函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。