Golang state.SetAfterHooks函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Golang中github.com/juju/juju/state.SetAfterHooks函数的典型用法代码示例。如果您正苦于以下问题：Golang SetAfterHooks函数的具体用法？Golang SetAfterHooks怎么用？Golang SetAfterHooks使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了SetAfterHooks函数的7个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Golang代码示例。

示例1: assertDyingEnvironTransitionDyingToDead

func (s *ModelSuite) assertDyingEnvironTransitionDyingToDead(c *gc.C, st *state.State) {
	// Add a service to prevent the model from transitioning directly to Dead.
	// Add the service before getting the Model, otherwise we'll have to run
	// the transaction twice, and hit the hook point too early.
	svc := factory.NewFactory(st).MakeService(c, nil)
	env, err := st.Model()
	c.Assert(err, jc.ErrorIsNil)

	// ProcessDyingModel is called by a worker after Destroy is called. To
	// avoid a race, we jump the gun here and test immediately after the
	// environement was set to dead.
	defer state.SetAfterHooks(c, st, func() {
		c.Assert(env.Refresh(), jc.ErrorIsNil)
		c.Assert(env.Life(), gc.Equals, state.Dying)

		err := svc.Destroy()
		c.Assert(err, jc.ErrorIsNil)

		c.Assert(st.ProcessDyingModel(), jc.ErrorIsNil)

		c.Assert(env.Refresh(), jc.ErrorIsNil)
		c.Assert(env.Life(), gc.Equals, state.Dead)
	}).Check()

	c.Assert(env.Destroy(), jc.ErrorIsNil)
}

开发者ID:makyo，项目名称:juju，代码行数:26，代码来源:model_test.go

示例2: TestEnsureMinUnitsDecreaseMinUnitsAfter

func (s *MinUnitsSuite) TestEnsureMinUnitsDecreaseMinUnitsAfter(c *gc.C) {
	s.addUnits(c, 2)
	service := s.service
	err := service.SetMinUnits(5)
	c.Assert(err, jc.ErrorIsNil)
	defer state.SetAfterHooks(c, s.State, func() {
		err := service.SetMinUnits(3)
		c.Assert(err, jc.ErrorIsNil)
	}).Check()
	c.Assert(service.Refresh(), gc.IsNil)
	err = service.EnsureMinUnits()
	c.Assert(err, jc.ErrorIsNil)
	assertAllUnits(c, service, 3)
}

开发者ID:imoapps，项目名称:juju，代码行数:14，代码来源:minimumunits_test.go

示例3: TestProcessDyingEnvironWithMachinesAndServicesNoOp

func (s *ModelSuite) TestProcessDyingEnvironWithMachinesAndServicesNoOp(c *gc.C) {
	st := s.Factory.MakeModel(c, nil)
	defer st.Close()

	// calling ProcessDyingModel on a live environ should fail.
	err := st.ProcessDyingModel()
	c.Assert(err, gc.ErrorMatches, "model is not dying")

	// add some machines and services
	env, err := st.Model()
	c.Assert(err, jc.ErrorIsNil)
	_, err = st.AddMachine("quantal", state.JobHostUnits)
	c.Assert(err, jc.ErrorIsNil)
	service := s.Factory.MakeService(c, &factory.ServiceParams{Creator: env.Owner()})
	ch, _, err := service.Charm()
	c.Assert(err, jc.ErrorIsNil)
	args := state.AddServiceArgs{
		Name:  service.Name(),
		Owner: service.GetOwnerTag(),
		Charm: ch,
	}
	service, err = st.AddService(args)
	c.Assert(err, jc.ErrorIsNil)

	assertEnv := func(life state.Life, expectedMachines, expectedServices int) {
		c.Assert(env.Refresh(), jc.ErrorIsNil)
		c.Assert(env.Life(), gc.Equals, life)

		machines, err := st.AllMachines()
		c.Assert(err, jc.ErrorIsNil)
		c.Assert(machines, gc.HasLen, expectedMachines)

		services, err := st.AllServices()
		c.Assert(err, jc.ErrorIsNil)
		c.Assert(services, gc.HasLen, expectedServices)
	}

	// Simulate processing a dying envrionment after an envrionment is set to
	// dying, but before the cleanup has removed machines and services.
	defer state.SetAfterHooks(c, st, func() {
		assertEnv(state.Dying, 1, 1)
		err := st.ProcessDyingModel()
		c.Assert(err, gc.ErrorMatches, `model not empty, found 1 machine\(s\)`)
		assertEnv(state.Dying, 1, 1)
	}).Check()

	c.Assert(env.Refresh(), jc.ErrorIsNil)
	c.Assert(env.Destroy(), jc.ErrorIsNil)
}

开发者ID:makyo，项目名称:juju，代码行数:49，代码来源:model_test.go

示例4: TestEnsureUpgradeInfoRace

func (s *UpgradeSuite) TestEnsureUpgradeInfoRace(c *gc.C) {
	v100 := vers("1.0.0")
	v200 := vers("2.0.0")

	_, err := s.State.EnsureUpgradeInfo(s.serverIdA, v100, v200)
	c.Assert(err, jc.ErrorIsNil)

	defer state.SetAfterHooks(c, s.State, func() {
		err := s.State.ClearUpgradeInfo()
		c.Assert(err, jc.ErrorIsNil)
	}).Check()

	info, err := s.State.EnsureUpgradeInfo(s.serverIdA, v100, v200)
	c.Assert(err, gc.ErrorMatches, "current upgrade info not found")
	c.Assert(err, jc.Satisfies, errors.IsNotFound)
	c.Assert(info, gc.IsNil)
}

开发者ID:kat-co，项目名称:juju，代码行数:17，代码来源:upgrade_test.go

示例5: TestEnsureUpgradeInfoMultipleServersRace2

func (s *UpgradeSuite) TestEnsureUpgradeInfoMultipleServersRace2(c *gc.C) {
	serverIdB, serverIdC := s.addControllers(c)
	s.provision(c, serverIdB, serverIdC)

	v111 := vers("1.1.1")
	v123 := vers("1.2.3")
	_, err := s.State.EnsureUpgradeInfo(s.serverIdA, v111, v123)
	c.Assert(err, jc.ErrorIsNil)

	defer state.SetAfterHooks(c, s.State, func() {
		_, err := s.State.EnsureUpgradeInfo(serverIdC, v111, v123)
		c.Assert(err, jc.ErrorIsNil)
	}).Check()

	info, err := s.State.EnsureUpgradeInfo(serverIdB, v111, v123)
	c.Assert(err, jc.ErrorIsNil)
	expectReady := []string{s.serverIdA, serverIdB, serverIdC}
	c.Assert(info.ControllersReady(), jc.SameContents, expectReady)
}

开发者ID:kat-co，项目名称:juju，代码行数:19，代码来源:upgrade_test.go

示例6: assertDyingEnvironTransitionDyingToDead

func (s *ModelSuite) assertDyingEnvironTransitionDyingToDead(c *gc.C, st *state.State) {
	env, err := st.Model()
	c.Assert(err, jc.ErrorIsNil)

	// ProcessDyingModel is called by a worker after Destroy is called. To
	// avoid a race, we jump the gun here and test immediately after the
	// environement was set to dead.
	defer state.SetAfterHooks(c, st, func() {
		c.Assert(env.Refresh(), jc.ErrorIsNil)
		c.Assert(env.Life(), gc.Equals, state.Dying)

		c.Assert(st.ProcessDyingModel(), jc.ErrorIsNil)

		c.Assert(env.Refresh(), jc.ErrorIsNil)
		c.Assert(env.Life(), gc.Equals, state.Dead)
	}).Check()

	c.Assert(env.Destroy(), jc.ErrorIsNil)
}

开发者ID:AlexisBruemmer，项目名称:juju，代码行数:19，代码来源:model_test.go

示例7: TestEnsureUpgradeInfoMultipleServersRace4

func (s *UpgradeSuite) TestEnsureUpgradeInfoMultipleServersRace4(c *gc.C) {
	serverIdB, serverIdC := s.addControllers(c)
	s.provision(c, serverIdB, serverIdC)

	v111 := vers("1.1.1")
	v123 := vers("1.2.3")
	v124 := vers("1.2.4")
	_, err := s.State.EnsureUpgradeInfo(s.serverIdA, v111, v123)
	c.Assert(err, jc.ErrorIsNil)

	defer state.SetAfterHooks(c, s.State, nil, func() {
		err := s.State.ClearUpgradeInfo()
		c.Assert(err, jc.ErrorIsNil)
		_, err = s.State.EnsureUpgradeInfo(serverIdC, v111, v124)
		c.Assert(err, jc.ErrorIsNil)
	}).Check()

	_, err = s.State.EnsureUpgradeInfo(serverIdB, v111, v123)
	c.Assert(err, gc.ErrorMatches, "current upgrade info mismatch: expected target version 1.2.3, got 1.2.4")
}

开发者ID:kat-co，项目名称:juju，代码行数:20，代码来源:upgrade_test.go

注：本文中的github.com/juju/juju/state.SetAfterHooks函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。