Golang shared.WebsocketMirror函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Golang中github.com/lxc/lxd/shared.WebsocketMirror函数的典型用法代码示例。如果您正苦于以下问题：Golang WebsocketMirror函数的具体用法？Golang WebsocketMirror怎么用？Golang WebsocketMirror使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了WebsocketMirror函数的11个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Golang代码示例。

示例1: rsyncWebsocket

func rsyncWebsocket(cmd *exec.Cmd, conn *websocket.Conn) error {
	stdin, err := cmd.StdinPipe()
	if err != nil {
		return err
	}

	stdout, err := cmd.StdoutPipe()
	if err != nil {
		return err
	}

	stderr, err := cmd.StderrPipe()
	if err != nil {
		return err
	}

	if err := cmd.Start(); err != nil {
		return err
	}

	shared.WebsocketMirror(conn, stdin, stdout)
	data, err2 := ioutil.ReadAll(stderr)
	if err2 != nil {
		shared.Debugf("error reading rsync stderr: %s", err2)
		return err2
	}
	shared.Debugf("Stderr from rsync: %s", data)

	err = cmd.Wait()
	if err != nil {
		shared.Debugf("rsync recv error %s: %s", err, string(data))
	}

	return err
}

开发者ID:rockstar，项目名称:lxd，代码行数:35，代码来源:rsync.go

示例2: RsyncSend

// RsyncSend sets up the sending half of an rsync, to recursively send the
// directory pointed to by path over the websocket.
func RsyncSend(path string, conn *websocket.Conn) error {
	cmd, dataSocket, stderr, err := rsyncSendSetup(path)
	if dataSocket != nil {
		defer dataSocket.Close()
	}
	if err != nil {
		return err
	}

	readDone, writeDone := shared.WebsocketMirror(conn, dataSocket, dataSocket)

	output, err := ioutil.ReadAll(stderr)
	if err != nil {
		shared.LogDebugf("problem reading rsync stderr %s", err)
	}

	err = cmd.Wait()
	if err != nil {
		shared.LogDebugf("problem with rsync send of %s: %s: %s", path, err, string(output))
	}

	<-readDone
	<-writeDone

	return err
}

开发者ID:vahe，项目名称:lxd，代码行数:28，代码来源:rsync.go

示例3: RsyncSend

// RsyncSend sets up the sending half of an rsync, to recursively send the
// directory pointed to by path over the websocket.
func RsyncSend(path string, conn *websocket.Conn) error {
	cmd, dataSocket, err := rsyncSendSetup(path)
	if dataSocket != nil {
		defer dataSocket.Close()
	}
	if err != nil {
		return err
	}

	shared.WebsocketMirror(conn, dataSocket, dataSocket)

	return cmd.Wait()
}

开发者ID:kostyll，项目名称:lxd，代码行数:15，代码来源:rsync.go

示例4: RsyncRecv

// RsyncRecv sets up the receiving half of the websocket to rsync (the other
// half set up by RsyncSend), putting the contents in the directory specified
// by path.
func RsyncRecv(path string, conn *websocket.Conn, writeWrapper func(io.WriteCloser) io.WriteCloser) error {
	cmd := exec.Command("rsync",
		"--server",
		"-vlogDtpre.iLsfx",
		"--numeric-ids",
		"--devices",
		"--partial",
		".",
		path)

	stdin, err := cmd.StdinPipe()
	if err != nil {
		return err
	}

	stdout, err := cmd.StdoutPipe()
	if err != nil {
		return err
	}

	stderr, err := cmd.StderrPipe()
	if err != nil {
		return err
	}

	if err := cmd.Start(); err != nil {
		return err
	}

	writePipe := io.WriteCloser(stdin)
	if writeWrapper != nil {
		writePipe = writeWrapper(stdin)
	}

	readDone, writeDone := shared.WebsocketMirror(conn, writePipe, stdout)
	data, err2 := ioutil.ReadAll(stderr)
	if err2 != nil {
		shared.LogDebugf("error reading rsync stderr: %s", err2)
		return err2
	}

	err = cmd.Wait()
	if err != nil {
		shared.LogDebugf("rsync recv error for path %s: %s: %s", path, err, string(data))
	}

	<-readDone
	<-writeDone

	return err
}

开发者ID:akshaykarle，项目名称:lxd，代码行数:54，代码来源:rsync.go

示例5: rsyncWebsocket

func rsyncWebsocket(cmd *exec.Cmd, conn *websocket.Conn) error {
	stdin, err := cmd.StdinPipe()
	if err != nil {
		return err
	}

	stdout, err := cmd.StdoutPipe()
	if err != nil {
		return err
	}

	if err := cmd.Start(); err != nil {
		return err
	}

	shared.WebsocketMirror(conn, stdin, stdout)
	return cmd.Wait()
}

开发者ID:kostyll，项目名称:lxd，代码行数:18，代码来源:rsync.go

示例6: RsyncSend

// RsyncSend sets up the sending half of an rsync, to recursively send the
// directory pointed to by path over the websocket.
func RsyncSend(path string, conn *websocket.Conn) error {
	cmd, dataSocket, stderr, err := rsyncSendSetup(path)
	if dataSocket != nil {
		defer dataSocket.Close()
	}
	if err != nil {
		return err
	}

	shared.WebsocketMirror(conn, dataSocket, dataSocket)

	output, err := ioutil.ReadAll(stderr)
	if err != nil {
		shared.Debugf("problem reading rsync stderr %s", err)
	}

	if err := cmd.Wait(); err != nil {
		shared.Debugf("problem with rsync send %s: %s", err, string(output))
	}

	return err
}

开发者ID:rockstar，项目名称:lxd，代码行数:24，代码来源:rsync.go

示例7: rsyncWebsocket

func rsyncWebsocket(path string, cmd *exec.Cmd, conn *websocket.Conn) error {
	stdin, err := cmd.StdinPipe()
	if err != nil {
		return err
	}

	stdout, err := cmd.StdoutPipe()
	if err != nil {
		return err
	}

	stderr, err := cmd.StderrPipe()
	if err != nil {
		return err
	}

	if err := cmd.Start(); err != nil {
		return err
	}

	readDone, writeDone := shared.WebsocketMirror(conn, stdin, stdout)
	data, err2 := ioutil.ReadAll(stderr)
	if err2 != nil {
		shared.LogDebugf("error reading rsync stderr: %s", err2)
		return err2
	}

	err = cmd.Wait()
	if err != nil {
		shared.LogDebugf("rsync recv error for path %s: %s: %s", path, err, string(data))
	}

	<-readDone
	<-writeDone

	return err
}

开发者ID:vahe，项目名称:lxd，代码行数:37，代码来源:rsync.go

示例8: Do

func (s *execWs) Do(id string) shared.OperationResult {
	<-s.allConnected

	var err error
	var ttys []*os.File
	var ptys []*os.File

	if s.interactive {
		ttys = make([]*os.File, 1)
		ptys = make([]*os.File, 1)
		ptys[0], ttys[0], err = shared.OpenPty(s.rootUid, s.rootGid)
		s.options.StdinFd = ttys[0].Fd()
		s.options.StdoutFd = ttys[0].Fd()
		s.options.StderrFd = ttys[0].Fd()
	} else {
		ttys = make([]*os.File, 3)
		ptys = make([]*os.File, 3)
		for i := 0; i < len(ttys); i++ {
			ptys[i], ttys[i], err = shared.Pipe()
			if err != nil {
				return shared.OperationError(err)
			}
		}
		s.options.StdinFd = ptys[0].Fd()
		s.options.StdoutFd = ttys[1].Fd()
		s.options.StderrFd = ttys[2].Fd()
	}

	controlExit := make(chan bool)
	var wgEOF sync.WaitGroup

	if s.interactive {
		wgEOF.Add(1)
		go func() {
			select {
			case <-s.controlConnected:
				break

			case <-controlExit:
				return
			}

			for {
				mt, r, err := s.conns[-1].NextReader()
				if mt == websocket.CloseMessage {
					break
				}

				if err != nil {
					shared.Debugf("Got error getting next reader %s", err)
					break
				}

				buf, err := ioutil.ReadAll(r)
				if err != nil {
					shared.Debugf("Failed to read message %s", err)
					break
				}

				command := shared.ContainerExecControl{}

				if err := json.Unmarshal(buf, &command); err != nil {
					shared.Debugf("Failed to unmarshal control socket command: %s", err)
					continue
				}

				if command.Command == "window-resize" {
					winchWidth, err := strconv.Atoi(command.Args["width"])
					if err != nil {
						shared.Debugf("Unable to extract window width: %s", err)
						continue
					}

					winchHeight, err := strconv.Atoi(command.Args["height"])
					if err != nil {
						shared.Debugf("Unable to extract window height: %s", err)
						continue
					}

					err = shared.SetSize(int(ptys[0].Fd()), winchWidth, winchHeight)
					if err != nil {
						shared.Debugf("Failed to set window size to: %dx%d", winchWidth, winchHeight)
						continue
					}
				}

				if err != nil {
					shared.Debugf("Got error writing to writer %s", err)
					break
				}
			}
		}()
		go func() {
			<-shared.WebsocketMirror(s.conns[0], ptys[0], ptys[0])
			wgEOF.Done()
		}()
	} else {
		wgEOF.Add(len(ttys) - 1)
		for i := 0; i < len(ttys); i++ {
			go func(i int) {
//.........这里部分代码省略.........

开发者ID:pombredanne，项目名称:lxd，代码行数:101，代码来源:container_exec.go

示例9: Do

func (s *execWs) Do(op *operation) error {
	<-s.allConnected

	var err error
	var ttys []*os.File
	var ptys []*os.File

	var stdin *os.File
	var stdout *os.File
	var stderr *os.File

	if s.interactive {
		ttys = make([]*os.File, 1)
		ptys = make([]*os.File, 1)
		ptys[0], ttys[0], err = shared.OpenPty(s.rootUid, s.rootGid)

		stdin = ttys[0]
		stdout = ttys[0]
		stderr = ttys[0]

		if s.width > 0 && s.height > 0 {
			shared.SetSize(int(ptys[0].Fd()), s.width, s.height)
		}
	} else {
		ttys = make([]*os.File, 3)
		ptys = make([]*os.File, 3)
		for i := 0; i < len(ttys); i++ {
			ptys[i], ttys[i], err = shared.Pipe()
			if err != nil {
				return err
			}
		}

		stdin = ptys[0]
		stdout = ttys[1]
		stderr = ttys[2]
	}

	controlExit := make(chan bool)
	var wgEOF sync.WaitGroup

	if s.interactive {
		wgEOF.Add(1)
		go func() {
			select {
			case <-s.controlConnected:
				break

			case <-controlExit:
				return
			}

			for {
				mt, r, err := s.conns[-1].NextReader()
				if mt == websocket.CloseMessage {
					break
				}

				if err != nil {
					shared.Debugf("Got error getting next reader %s", err)
					break
				}

				buf, err := ioutil.ReadAll(r)
				if err != nil {
					shared.Debugf("Failed to read message %s", err)
					break
				}

				command := shared.ContainerExecControl{}

				if err := json.Unmarshal(buf, &command); err != nil {
					shared.Debugf("Failed to unmarshal control socket command: %s", err)
					continue
				}

				if command.Command == "window-resize" {
					winchWidth, err := strconv.Atoi(command.Args["width"])
					if err != nil {
						shared.Debugf("Unable to extract window width: %s", err)
						continue
					}

					winchHeight, err := strconv.Atoi(command.Args["height"])
					if err != nil {
						shared.Debugf("Unable to extract window height: %s", err)
						continue
					}

					err = shared.SetSize(int(ptys[0].Fd()), winchWidth, winchHeight)
					if err != nil {
						shared.Debugf("Failed to set window size to: %dx%d", winchWidth, winchHeight)
						continue
					}
				}
			}
		}()
		go func() {
			readDone, writeDone := shared.WebsocketMirror(s.conns[0], ptys[0], ptys[0])
			<-readDone
//.........这里部分代码省略.........

开发者ID:jsavikko，项目名称:lxd，代码行数:101，代码来源:container_exec.go

示例10: Do


//.........这里部分代码省略.........
				if err := json.Unmarshal(buf, &command); err != nil {
					shared.LogDebugf("Failed to unmarshal control socket command: %s", err)
					continue
				}

				if command.Command == "window-resize" {
					winchWidth, err := strconv.Atoi(command.Args["width"])
					if err != nil {
						shared.LogDebugf("Unable to extract window width: %s", err)
						continue
					}

					winchHeight, err := strconv.Atoi(command.Args["height"])
					if err != nil {
						shared.LogDebugf("Unable to extract window height: %s", err)
						continue
					}

					err = shared.SetSize(int(ptys[0].Fd()), winchWidth, winchHeight)
					if err != nil {
						shared.LogDebugf("Failed to set window size to: %dx%d", winchWidth, winchHeight)
						continue
					}
				} else if command.Command == "signal" {
					if err := syscall.Kill(receivedPid, command.Signal); err != nil {
						shared.LogDebugf("Failed forwarding signal '%s' to PID %d.", command.Signal, receivedPid)
						continue
					}
					shared.LogDebugf("Forwarded signal '%s' to PID %d.", command.Signal, receivedPid)
				}
			}
		}()
		go func() {
			readDone, writeDone := shared.WebsocketMirror(s.conns[0], ptys[0], ptys[0])
			<-readDone
			<-writeDone
			s.conns[0].Close()
			wgEOF.Done()
		}()
	} else {
		wgEOF.Add(len(ttys) - 1)
		for i := 0; i < len(ttys); i++ {
			go func(i int) {
				if i == 0 {
					<-shared.WebsocketRecvStream(ttys[i], s.conns[i])
					ttys[i].Close()
				} else {
					<-shared.WebsocketSendStream(s.conns[i], ptys[i], -1)
					ptys[i].Close()
					wgEOF.Done()
				}
			}(i)
		}
	}

	finisher := func(cmdResult int, cmdErr error) error {
		for _, tty := range ttys {
			tty.Close()
		}

		if s.conns[-1] == nil {
			if s.interactive {
				controlExit <- true
			}
		} else {
			s.conns[-1].Close()

开发者ID:vahe，项目名称:lxd，代码行数:67，代码来源:container_exec.go

示例11: Do


//.........这里部分代码省略.........
				if err := json.Unmarshal(buf, &command); err != nil {
					shared.LogDebugf("Failed to unmarshal control socket command: %s", err)
					continue
				}

				if command.Command == "window-resize" {
					winchWidth, err := strconv.Atoi(command.Args["width"])
					if err != nil {
						shared.LogDebugf("Unable to extract window width: %s", err)
						continue
					}

					winchHeight, err := strconv.Atoi(command.Args["height"])
					if err != nil {
						shared.LogDebugf("Unable to extract window height: %s", err)
						continue
					}

					err = shared.SetSize(int(ptys[0].Fd()), winchWidth, winchHeight)
					if err != nil {
						shared.LogDebugf("Failed to set window size to: %dx%d", winchWidth, winchHeight)
						continue
					}
				} else if command.Command == "signal" {
					if err := syscall.Kill(receivedPid, command.Signal); err != nil {
						shared.LogDebugf("Failed forwarding signal '%s' to PID %d.", command.Signal, receivedPid)
						continue
					}
					shared.LogDebugf("Forwarded signal '%s' to PID %d.", command.Signal, receivedPid)
				}
			}
		}()
		go func() {
			readDone, writeDone := shared.WebsocketMirror(s.conns[0], ptys[0], ptys[0])
			<-readDone
			<-writeDone
			s.conns[0].Close()
			wgEOF.Done()
		}()
	} else {
		wgEOF.Add(len(ttys) - 1)
		for i := 0; i < len(ttys); i++ {
			go func(i int) {
				if i == 0 {
					<-shared.WebsocketRecvStream(ttys[i], s.conns[i])
					ttys[i].Close()
				} else {
					<-shared.WebsocketSendStream(s.conns[i], ptys[i], -1)
					ptys[i].Close()
					wgEOF.Done()
				}
			}(i)
		}
	}

	finisher := func(cmdResult int, cmdErr error) error {
		for _, tty := range ttys {
			tty.Close()
		}

		if s.conns[-1] == nil {
			if s.interactive {
				controlExit <- true
			}
		} else {
			s.conns[-1].Close()

开发者ID:akshaykarle，项目名称:lxd，代码行数:67，代码来源:container_exec.go

注：本文中的github.com/lxc/lxd/shared.WebsocketMirror函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。