Java ScaleDirection类代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› Java›Java编程经验

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Java中eu.hansolo.medusa.Gauge.ScaleDirection类的典型用法代码示例。如果您正苦于以下问题：Java ScaleDirection类的具体用法？Java ScaleDirection怎么用？Java ScaleDirection使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。

ScaleDirection类属于eu.hansolo.medusa.Gauge包，在下文中一共展示了ScaleDirection类的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Java代码示例。

示例1: drawGradientBar

import eu.hansolo.medusa.Gauge.ScaleDirection; //导入依赖的package包/类
private void drawGradientBar() {
    double     xy     = TickLabelLocation.OUTSIDE == tickLabelLocation ? 0.115 * size : 0.0515 * size;
    double     wh     = TickLabelLocation.OUTSIDE == tickLabelLocation ? size * 0.77 : size * 0.897;
    double     offset = 90 - startAngle;
    List<Stop> stops  = getSkinnable().getGradientBarStops();
    Map<Double, Color> stopAngleMap     = new HashMap<>(stops.size());
    for (Stop stop : stops) { stopAngleMap.put(stop.getOffset() * angleRange, stop.getColor()); }
    double                  offsetFactor        = ScaleDirection.CLOCKWISE == scaleDirection ? (startAngle - 90) : (startAngle + 180);
    AngleConicalGradient    gradient            = new AngleConicalGradient(size * 0.5, size * 0.5, offsetFactor, stopAngleMap, getSkinnable().getScaleDirection());

    double barStartAngle  = ScaleDirection.CLOCKWISE == scaleDirection ? -minValue * angleStep : minValue * angleStep;
    double barAngleExtend = ScaleDirection.CLOCKWISE == scaleDirection ? getSkinnable().getRange() * angleStep : -getSkinnable().getRange() * angleStep;
    tickMarkCtx.save();
    tickMarkCtx.setStroke(gradient.getImagePattern(new Rectangle(xy - 0.026 * size, xy - 0.026 * size, wh + 0.052 * size, wh + 0.052 * size)));
    tickMarkCtx.setLineWidth(size * 0.052);
    tickMarkCtx.setLineCap(StrokeLineCap.BUTT);
    tickMarkCtx.strokeArc(xy, xy, wh, wh, -(offset + barStartAngle), -barAngleExtend, ArcType.OPEN);
    tickMarkCtx.restore();
}

开发者ID:HanSolo，项目名称:medusademo，代码行数:20，代码来源:InteractiveGaugeSkin.java

示例2: rotateNeedle

import eu.hansolo.medusa.Gauge.ScaleDirection; //导入依赖的package包/类
private void rotateNeedle(final double VALUE) {
    double startOffsetAngle = 180 - startAngle;
    double targetAngle;
    if (ScaleDirection.CLOCKWISE == gauge.getScaleDirection()) {
        targetAngle = startOffsetAngle + (VALUE - minValue) * angleStep;
        targetAngle = Helper.clamp(startOffsetAngle, startOffsetAngle + angleRange, targetAngle);
    } else {
        targetAngle = startOffsetAngle - (VALUE - minValue) * angleStep;
        targetAngle = Helper.clamp(startOffsetAngle - angleRange, startOffsetAngle, targetAngle);
    }
    needleRotate.setAngle(targetAngle);
    valueText.setText(formatNumber(gauge.getLocale(), gauge.getFormatString(), gauge.getDecimals(), VALUE));
    if (gauge.isLcdVisible()) {
        valueText.setTranslateX((0.675 * width - valueText.getLayoutBounds().getWidth()));
    } else {
        valueText.setTranslateX((width - valueText.getLayoutBounds().getWidth()) * 0.5);
    }
    if (gauge.isAverageVisible()) drawAverage();
}

开发者ID:HanSolo，项目名称:Medusa，代码行数:20，代码来源:HSkin.java

示例3: drawGradientBar

import eu.hansolo.medusa.Gauge.ScaleDirection; //导入依赖的package包/类
private void drawGradientBar() {
    double     scaledWidth = width * 0.9;
    double     xy          = TickLabelLocation.OUTSIDE == tickLabelLocation ? 0.1705 * scaledWidth : 0.107 * scaledWidth;
    double     wh          = TickLabelLocation.OUTSIDE == tickLabelLocation ? scaledWidth * 0.77 : scaledWidth * 0.897;
    double     offsetY     = -0.1 * height;
    double     offset      = 90 - startAngle;
    List<Stop> stops       = gauge.getGradientBarStops();
    Map<Double, Color> stopAngleMap = new HashMap<>(stops.size());
    for (Stop stop : stops) { stopAngleMap.put(stop.getOffset() * angleRange, stop.getColor()); }
    double               offsetFactor = ScaleDirection.CLOCKWISE == scaleDirection ? startAngle - angleRange + 180 : (startAngle + 180);
    AngleConicalGradient gradient     = new AngleConicalGradient(width * 0.5, width * 0.5, offsetFactor, stopAngleMap, gauge.getScaleDirection());

    double barStartAngle  = ScaleDirection.CLOCKWISE == scaleDirection ? -minValue * angleStep : minValue * angleStep;
    double barAngleExtend = ScaleDirection.CLOCKWISE == scaleDirection ? gauge.getRange() * angleStep : -gauge.getRange() * angleStep;
    tickMarkCtx.save();
    tickMarkCtx.setStroke(gradient.getImagePattern(new Rectangle(xy - 0.026 * width, xy - 0.026 * width + offsetY, wh + 0.052 * width, wh + 0.052 * width)));
    tickMarkCtx.setLineWidth(scaledWidth * 0.052);
    tickMarkCtx.setLineCap(StrokeLineCap.BUTT);
    tickMarkCtx.strokeArc(xy, xy + offsetY, wh, wh, -(offset + barStartAngle), -barAngleExtend, ArcType.OPEN);
    tickMarkCtx.restore();
}

开发者ID:HanSolo，项目名称:Medusa，代码行数:22，代码来源:HSkin.java

示例4: drawGradientBar

import eu.hansolo.medusa.Gauge.ScaleDirection; //导入依赖的package包/类
private void drawGradientBar() {
    Pos                knobPosition      = gauge.getKnobPosition();
    TickLabelLocation  tickLabelLocation = gauge.getTickLabelLocation();
    double             scaledSize        = size * 1.9;
    double             xy                = TickLabelLocation.OUTSIDE == tickLabelLocation ? 0.105 * scaledSize : 0.03875 * scaledSize;
    double             wh                = TickLabelLocation.OUTSIDE == tickLabelLocation ? scaledSize * 0.79 : scaledSize * 0.925;
    double             offsetX           = Pos.TOP_LEFT == knobPosition || Pos.BOTTOM_LEFT == knobPosition ? -scaledSize * 0.475 : 0;
    double             offsetY           = Pos.TOP_LEFT == knobPosition || Pos.TOP_RIGHT == knobPosition ? -scaledSize * 0.475 : 0;
    double             offset            = 90 - startAngle;
    ScaleDirection     scaleDirection    = gauge.getScaleDirection();
    List<Stop>         stops             = gauge.getGradientBarStops();
    Map<Double, Color> stopAngleMap      = new HashMap<>(stops.size());
    for (Stop stop : stops) { stopAngleMap.put(stop.getOffset() * ANGLE_RANGE, stop.getColor()); }
    double               offsetFactor = ScaleDirection.CLOCKWISE == scaleDirection ? (Pos.TOP_LEFT == knobPosition || Pos.BOTTOM_RIGHT == knobPosition ? startAngle : 180 - startAngle) : (startAngle + 180);
    AngleConicalGradient gradient     = new AngleConicalGradient(scaledSize * 0.5, scaledSize * 0.5, offsetFactor, stopAngleMap, gauge.getScaleDirection());

    double barStartAngle  = ScaleDirection.CLOCKWISE == scaleDirection ? -minValue * angleStep : minValue * angleStep;
    double barAngleExtend = ScaleDirection.CLOCKWISE == scaleDirection ? gauge.getRange() * angleStep : -gauge.getRange() * angleStep;
    tickMarkCtx.save();
    tickMarkCtx.setStroke(gradient.getImagePattern(new Rectangle(xy - 0.026 * scaledSize + offsetX, xy - 0.026 * scaledSize + offsetY, wh + 0.052 * scaledSize, wh + 0.052 * scaledSize)));
    tickMarkCtx.setLineWidth(scaledSize * 0.052);
    tickMarkCtx.setLineCap(StrokeLineCap.BUTT);
    tickMarkCtx.strokeArc(xy + offsetX, xy + offsetY, wh, wh, -(offset + barStartAngle), -barAngleExtend, ArcType.OPEN);
    tickMarkCtx.restore();
}

开发者ID:HanSolo，项目名称:Medusa，代码行数:26，代码来源:QuarterSkin.java

示例5: rotateNeedle

import eu.hansolo.medusa.Gauge.ScaleDirection; //导入依赖的package包/类
private void rotateNeedle(final double VALUE) {
    double startOffsetAngle = 180 - startAngle;
    double targetAngle;
    if (ScaleDirection.CLOCKWISE == gauge.getScaleDirection()) {
        targetAngle = startOffsetAngle + (VALUE - minValue) * angleStep;
        targetAngle = Helper.clamp(startOffsetAngle, startOffsetAngle + angleRange, targetAngle);
    } else {
        targetAngle = startOffsetAngle - (VALUE - minValue) * angleStep;
        targetAngle = Helper.clamp(startOffsetAngle - angleRange, startOffsetAngle, targetAngle);
    }
    needleRotate.setAngle(targetAngle);
    valueText.setText(formatNumber(gauge.getLocale(), gauge.getFormatString(), gauge.getDecimals(), VALUE));
    valueText.setTranslateX(Pos.CENTER_LEFT == gauge.getKnobPosition() ?
                            width * 0.6 - valueText.getLayoutBounds().getWidth() :
                            width * 0.9 - valueText.getLayoutBounds().getWidth());
    if (gauge.isAverageVisible()) drawAverage();
}

开发者ID:HanSolo，项目名称:Medusa，代码行数:18，代码来源:VSkin.java

示例6: drawGradientBar

import eu.hansolo.medusa.Gauge.ScaleDirection; //导入依赖的package包/类
private void drawGradientBar() {
    TickLabelLocation  tickLabelLocation     = gauge.getTickLabelLocation();
    double             scaledHeight          = height * 0.9;
    double             xy                    = TickLabelLocation.OUTSIDE == tickLabelLocation ? 0.1705 * scaledHeight : 0.107 * scaledHeight;
    double             wh                    = TickLabelLocation.OUTSIDE == tickLabelLocation ? scaledHeight * 0.77 : scaledHeight * 0.897;
    double             offset                = 90 - startAngle;
    double             offsetX               = -0.1 * width;
    double             knobPositionOffsetCW  = Pos.CENTER_LEFT == gauge.getKnobPosition() ? 90 : 270;
    double             knobPositionOffsetCCW = Pos.CENTER_LEFT == gauge.getKnobPosition() ? 180 : 0;
    ScaleDirection     scaleDirection        = gauge.getScaleDirection();
    List<Stop>         stops                 = gauge.getGradientBarStops();
    Map<Double, Color> stopAngleMap          = new HashMap<>(stops.size());
    for (Stop stop : stops) { stopAngleMap.put(stop.getOffset() * angleRange, stop.getColor()); }
    double               offsetFactor = ScaleDirection.CLOCKWISE == scaleDirection ? knobPositionOffsetCW - angleRange * 0.5 : angleRange - (angleRange / 180 * angleRange) + knobPositionOffsetCCW;
    AngleConicalGradient gradient     = new AngleConicalGradient(width * 0.5, width * 0.5, offsetFactor, stopAngleMap, gauge.getScaleDirection());

    double barStartAngle  = ScaleDirection.CLOCKWISE == scaleDirection ? -minValue * angleStep : minValue * angleStep;
    double barAngleExtend = ScaleDirection.CLOCKWISE == scaleDirection ? gauge.getRange() * angleStep : -gauge.getRange() * angleStep;
    tickMarkCtx.save();
    tickMarkCtx.setStroke(gradient.getImagePattern(new Rectangle(xy - 0.026 * height + offsetX, xy - 0.026 * height, wh + 0.052 * height, wh + 0.052 * height)));
    tickMarkCtx.setLineWidth(scaledHeight * 0.052);
    tickMarkCtx.setLineCap(StrokeLineCap.BUTT);
    tickMarkCtx.strokeArc(xy + offsetX, xy, wh, wh, -(offset + barStartAngle), -barAngleExtend, ArcType.OPEN);
    tickMarkCtx.restore();
}

开发者ID:HanSolo，项目名称:Medusa，代码行数:26，代码来源:VSkin.java

示例7: drawGradientBar

import eu.hansolo.medusa.Gauge.ScaleDirection; //导入依赖的package包/类
private void drawGradientBar() {
    double     xy     = TickLabelLocation.OUTSIDE == tickLabelLocation ? 0.115 * size : 0.0515 * size;
    double     wh     = TickLabelLocation.OUTSIDE == tickLabelLocation ? size * 0.77 : size * 0.897;
    double     offset = 90 - startAngle;
    List<Stop> stops  = gauge.getGradientBarStops();
    Map<Double, Color> stopAngleMap     = new HashMap<>(stops.size());
    for (Stop stop : stops) { stopAngleMap.put(stop.getOffset() * angleRange, stop.getColor()); }
    double                  offsetFactor        = ScaleDirection.CLOCKWISE == scaleDirection ? (startAngle - 90) : (startAngle + 180);
    AngleConicalGradient    gradient            = new AngleConicalGradient(size * 0.5, size * 0.5, offsetFactor, stopAngleMap, gauge.getScaleDirection());

    double barStartAngle  = ScaleDirection.CLOCKWISE == scaleDirection ? -minValue * angleStep : minValue * angleStep;
    double barAngleExtend = ScaleDirection.CLOCKWISE == scaleDirection ? gauge.getRange() * angleStep : -gauge.getRange() * angleStep;
    tickMarkCtx.save();
    tickMarkCtx.setStroke(gradient.getImagePattern(new Rectangle(xy - 0.026 * size, xy - 0.026 * size, wh + 0.052 * size, wh + 0.052 * size)));
    tickMarkCtx.setLineWidth(size * 0.052);
    tickMarkCtx.setLineCap(StrokeLineCap.BUTT);
    tickMarkCtx.strokeArc(xy, xy, wh, wh, -(offset + barStartAngle), -barAngleExtend, ArcType.OPEN);
    tickMarkCtx.restore();
}

开发者ID:HanSolo，项目名称:Medusa，代码行数:20，代码来源:GaugeSkin.java

示例8: drawGradientBar

import eu.hansolo.medusa.Gauge.ScaleDirection; //导入依赖的package包/类
private void drawGradientBar() {
    double             xy           = size * 0.1875;
    double             wh           = size * 0.625;
    double             offset       = -ANGLE_RANGE * 0.5 - 90;
    double             startAngle   = 315;
    List<Stop>         stops        = gauge.getGradientBarStops();
    Map<Double, Color> stopAngleMap = new HashMap<>(stops.size());
    for (Stop stop : stops) { stopAngleMap.put(stop.getOffset() * ANGLE_RANGE, stop.getColor()); }
    double               offsetFactor = startAngle - 90;
    AngleConicalGradient gradient     = new AngleConicalGradient(size * 0.5, size * 0.5, offsetFactor, stopAngleMap, ScaleDirection.CLOCKWISE);

    double barStartAngle  = 0;
    double barAngleExtend = 270;
    sectionCtx.save();
    sectionCtx.setStroke(gradient.getImagePattern(new Rectangle(xy - 0.09191176 * size, xy - 0.09191176 * size, wh + 0.18382353 * size, wh + 0.18382353 * size)));
    sectionCtx.setLineWidth(size * 0.18382353);
    sectionCtx.setLineCap(StrokeLineCap.BUTT);
    sectionCtx.strokeArc(xy, xy, wh, wh, -(offset + barStartAngle), -barAngleExtend, ArcType.OPEN);
    sectionCtx.restore();    
}

开发者ID:HanSolo，项目名称:Medusa，代码行数:21，代码来源:TinySkin.java

示例9: normalizeStops

import eu.hansolo.medusa.Gauge.ScaleDirection; //导入依赖的package包/类
private List<Stop> normalizeStops(final double OFFSET, final List<Stop> STOPS) {
    double offset = Helper.clamp(0.0, 1.0, OFFSET);
    List<Stop> stops;
    if (null == STOPS || STOPS.isEmpty()) {
        stops = new ArrayList<>();
        stops.add(new Stop(0.0, Color.TRANSPARENT));
        stops.add(new Stop(1.0, Color.TRANSPARENT));
    } else {
        stops = STOPS;
    }
    List<Stop> sortedStops = calculate(stops, offset);

    // Reverse the Stops for CCW direction
    if (ScaleDirection.COUNTER_CLOCKWISE == scaleDirection) {
        List<Stop> sortedStops3 = new ArrayList<>();
        Collections.reverse(sortedStops);
        for (Stop stop : sortedStops) { sortedStops3.add(new Stop(1.0 - stop.getOffset(), stop.getColor())); }
        sortedStops = sortedStops3;
    }
    return sortedStops;
}

开发者ID:HanSolo，项目名称:Medusa，代码行数:22，代码来源:ConicalGradient.java

示例10: rotateNeedle

import eu.hansolo.medusa.Gauge.ScaleDirection; //导入依赖的package包/类
private void rotateNeedle(double value) {
    double startOffsetAngle = 180 - startAngle;
    double targetAngle;
    if (NeedleBehavior.STANDARD == needleBehavior) {
        if (ScaleDirection.CLOCKWISE == getSkinnable().getScaleDirection()) {
            targetAngle = startOffsetAngle + (value - minValue) * angleStep;
            targetAngle = Helper.clamp(startOffsetAngle, startOffsetAngle + angleRange, targetAngle);
        } else {
            targetAngle = startOffsetAngle - (value - minValue) * angleStep;
            targetAngle = Helper.clamp(startOffsetAngle - angleRange, startOffsetAngle, targetAngle);
        }
    } else {
        if (value < minValue) value = maxValue - minValue + value;
        if (value > maxValue) value = value - maxValue + minValue;
        if (ScaleDirection.CLOCKWISE == getSkinnable().getScaleDirection()) {
            targetAngle = startOffsetAngle + (value - minValue) * angleStep;
            targetAngle = Helper.clamp(startOffsetAngle, startOffsetAngle + angleRange, targetAngle);
        } else {
            targetAngle = startOffsetAngle - (value - minValue) * angleStep;
            targetAngle = Helper.clamp(startOffsetAngle - angleRange, startOffsetAngle, targetAngle);
        }
    }

    needleRotate.setAngle(targetAngle);
    valueText.setText(String.format(locale, formatString, value));
    if (getSkinnable().isLcdVisible()) {
        valueText.setTranslateX((0.691 * size - valueText.getLayoutBounds().getWidth()));
    } else {
        valueText.setTranslateX((size - valueText.getLayoutBounds().getWidth()) * 0.5);
    }

    if (getSkinnable().isAverageVisible()) drawAverage();
}

开发者ID:HanSolo，项目名称:medusademo，代码行数:34，代码来源:InteractiveGaugeSkin.java

示例11: drawAverage

import eu.hansolo.medusa.Gauge.ScaleDirection; //导入依赖的package包/类
private void drawAverage() {
    double centerX = size * 0.5;
    double centerY = size * 0.5;
    // Draw average
    average.getElements().clear();
    double averageAngle;
    if (ScaleDirection.CLOCKWISE == scaleDirection) {
        averageAngle = startAngle - (getSkinnable().getAverage() - minValue) * angleStep;
    } else {
        averageAngle = startAngle + (getSkinnable().getAverage() - minValue) * angleStep;
    }
    double averageSize = Helper.clamp(3.0, 3.5, 0.01 * size);
    double sinValue      = Math.sin(Math.toRadians(averageAngle));
    double cosValue      = Math.cos(Math.toRadians(averageAngle));
    switch (tickLabelLocation) {
        case OUTSIDE:
            average.getElements().add(new MoveTo(centerX + size * 0.38 * sinValue, centerY + size * 0.38 * cosValue));
            sinValue = Math.sin(Math.toRadians(averageAngle - averageSize));
            cosValue = Math.cos(Math.toRadians(averageAngle - averageSize));
            average.getElements().add(new LineTo(centerX + size * 0.34 * sinValue, centerY + size * 0.34 * cosValue));
            sinValue = Math.sin(Math.toRadians(averageAngle + averageSize));
            cosValue = Math.cos(Math.toRadians(averageAngle + averageSize));
            average.getElements().add(new LineTo(centerX + size * 0.34 * sinValue, centerY + size * 0.34 * cosValue));
            average.getElements().add(new ClosePath());
            break;
        case INSIDE:
        default:
            average.getElements().add(new MoveTo(centerX + size * 0.465 * sinValue, centerY + size * 0.465 * cosValue));
            sinValue = Math.sin(Math.toRadians(averageAngle - averageSize));
            cosValue = Math.cos(Math.toRadians(averageAngle - averageSize));
            average.getElements().add(new LineTo(centerX + size * 0.425 * sinValue, centerY + size * 0.425 * cosValue));
            sinValue = Math.sin(Math.toRadians(averageAngle + averageSize));
            cosValue = Math.cos(Math.toRadians(averageAngle + averageSize));
            average.getElements().add(new LineTo(centerX + size * 0.425 * sinValue, centerY + size * 0.425 * cosValue));
            average.getElements().add(new ClosePath());
            break;
    }
    average.setFill(getSkinnable().getAverageColor());
    average.setStroke(getSkinnable().getTickMarkColor());
}

开发者ID:HanSolo，项目名称:medusademo，代码行数:41，代码来源:InteractiveGaugeSkin.java

示例12: getStartAngle

import eu.hansolo.medusa.Gauge.ScaleDirection; //导入依赖的package包/类
private double getStartAngle() {
    ScaleDirection scaleDirection = gauge.getScaleDirection();
    Pos            knobPosition   = gauge.getKnobPosition();
    switch(knobPosition) {
        case TOP_CENTER   : return ScaleDirection.CLOCKWISE == scaleDirection ? angleRange * 0.5 : -angleRange * 0.5;
        case BOTTOM_CENTER:
        default           : return ScaleDirection.CLOCKWISE == scaleDirection ? 180 + angleRange * 0.5 : 180 - angleRange * 0.5;
    }
}

开发者ID:HanSolo，项目名称:Medusa，代码行数:10，代码来源:HSkin.java

示例13: getStartAngle

import eu.hansolo.medusa.Gauge.ScaleDirection; //导入依赖的package包/类
private double getStartAngle() {
    ScaleDirection scaleDirection = gauge.getScaleDirection();
    Pos            knobPosition   = gauge.getKnobPosition();
    switch(knobPosition) {
        case BOTTOM_LEFT : return ScaleDirection.CLOCKWISE == scaleDirection ? 180 : 90;
        case TOP_LEFT    : return ScaleDirection.CLOCKWISE == scaleDirection ?  90 : 0;
        case TOP_RIGHT   : return ScaleDirection.CLOCKWISE == scaleDirection ?   0 : 270;
        case BOTTOM_RIGHT:
        default          : return ScaleDirection.CLOCKWISE == scaleDirection ? 270 : 180;
    }
}

开发者ID:HanSolo，项目名称:Medusa，代码行数:12，代码来源:QuarterSkin.java

示例14: rotateNeedle

import eu.hansolo.medusa.Gauge.ScaleDirection; //导入依赖的package包/类
private void rotateNeedle(final double VALUE) {
    double startOffsetAngle  = 180 - startAngle;
    double targetAngle;
    if (ScaleDirection.CLOCKWISE == gauge.getScaleDirection()) {
        targetAngle = startOffsetAngle + (VALUE - minValue) * angleStep;
        targetAngle = Helper.clamp(startOffsetAngle, startOffsetAngle + ANGLE_RANGE, targetAngle);
    } else {
        targetAngle = startOffsetAngle - (VALUE - minValue) * angleStep;
        targetAngle = Helper.clamp(startOffsetAngle - ANGLE_RANGE, startOffsetAngle, targetAngle);
    }
    needleRotate.setAngle(targetAngle);
    valueText.setText(formatNumber(gauge.getLocale(), gauge.getFormatString(), gauge.getDecimals(), VALUE));
    resizeValueText();
    if (gauge.isAverageVisible()) drawAverage();
}

开发者ID:HanSolo，项目名称:Medusa，代码行数:16，代码来源:QuarterSkin.java

示例15: drawAverage

import eu.hansolo.medusa.Gauge.ScaleDirection; //导入依赖的package包/类
private void drawAverage() {
    double scaledSize = size * 1.95;
    // Draw average
    average.getElements().clear();
    double averageAngle;
    if (ScaleDirection.CLOCKWISE == scaleDirection) {
        averageAngle = startAngle - (gauge.getAverage() - minValue) * angleStep;
    } else {
        averageAngle = startAngle + (gauge.getAverage() - minValue) * angleStep;
    }
    double averageSize = Helper.clamp(3.0, 3.5, 0.01 * size);
    double sinValue      = Math.sin(Math.toRadians(averageAngle));
    double cosValue      = Math.cos(Math.toRadians(averageAngle));
    switch (tickLabelLocation) {
        case OUTSIDE:
            average.getElements().add(new MoveTo(centerX + scaledSize * 0.38 * sinValue, centerY + scaledSize * 0.38 * cosValue));
            sinValue = Math.sin(Math.toRadians(averageAngle - averageSize));
            cosValue = Math.cos(Math.toRadians(averageAngle - averageSize));
            average.getElements().add(new LineTo(centerX + scaledSize * 0.34 * sinValue, centerY + scaledSize * 0.34 * cosValue));
            sinValue = Math.sin(Math.toRadians(averageAngle + averageSize));
            cosValue = Math.cos(Math.toRadians(averageAngle + averageSize));
            average.getElements().add(new LineTo(centerX + scaledSize * 0.34 * sinValue, centerY + scaledSize * 0.34 * cosValue));
            average.getElements().add(new ClosePath());
            break;
        case INSIDE:
        default:
            average.getElements().add(new MoveTo(centerX + scaledSize * 0.465 * sinValue, centerY + scaledSize * 0.465 * cosValue));
            sinValue = Math.sin(Math.toRadians(averageAngle - averageSize));
            cosValue = Math.cos(Math.toRadians(averageAngle - averageSize));
            average.getElements().add(new LineTo(centerX + scaledSize * 0.425 * sinValue, centerY + scaledSize * 0.425 * cosValue));
            sinValue = Math.sin(Math.toRadians(averageAngle + averageSize));
            cosValue = Math.cos(Math.toRadians(averageAngle + averageSize));
            average.getElements().add(new LineTo(centerX + scaledSize * 0.425 * sinValue, centerY + scaledSize * 0.425 * cosValue));
            average.getElements().add(new ClosePath());
            break;
    }
    average.setFill(gauge.getAverageColor());
    average.setStroke(gauge.getTickMarkColor());
}

开发者ID:HanSolo，项目名称:Medusa，代码行数:40，代码来源:QuarterSkin.java

示例16: getStartAngle

import eu.hansolo.medusa.Gauge.ScaleDirection; //导入依赖的package包/类
private double getStartAngle() {
    ScaleDirection scaleDirection = gauge.getScaleDirection();
    Pos            knobPosition   = gauge.getKnobPosition();
    switch(knobPosition) {
        case CENTER_LEFT : return ScaleDirection.CLOCKWISE == scaleDirection ? angleRange * 0.5 + 90 : 90 - angleRange * 0.5;
        case CENTER_RIGHT:
        default          : return ScaleDirection.CLOCKWISE == scaleDirection ? angleRange * 0.5 - 90 : 270 -  angleRange * 0.5;
    }
}

开发者ID:HanSolo，项目名称:Medusa，代码行数:10，代码来源:VSkin.java

示例17: rotateNeedle

import eu.hansolo.medusa.Gauge.ScaleDirection; //导入依赖的package包/类
private void rotateNeedle(double value) {
    double startOffsetAngle = 180 - startAngle;
    double targetAngle;
    if (NeedleBehavior.STANDARD == needleBehavior) {
        if (ScaleDirection.CLOCKWISE == gauge.getScaleDirection()) {
            targetAngle = startOffsetAngle + (value - minValue) * angleStep;
            targetAngle = Helper.clamp(startOffsetAngle, startOffsetAngle + angleRange, targetAngle);
        } else {
            targetAngle = startOffsetAngle - (value - minValue) * angleStep;
            targetAngle = Helper.clamp(startOffsetAngle - angleRange, startOffsetAngle, targetAngle);
        }
    } else {
        if (value < minValue) value = maxValue - minValue + value;
        if (value > maxValue) value = value - maxValue + minValue;
        if (ScaleDirection.CLOCKWISE == gauge.getScaleDirection()) {
            targetAngle = startOffsetAngle + (value - minValue) * angleStep;
            targetAngle = Helper.clamp(startOffsetAngle, startOffsetAngle + angleRange, targetAngle);
        } else {
            targetAngle = startOffsetAngle - (value - minValue) * angleStep;
            targetAngle = Helper.clamp(startOffsetAngle - angleRange, startOffsetAngle, targetAngle);
        }
    }

    needleRotate.setAngle(targetAngle);
    valueText.setText(formatNumber(gauge.getLocale(), gauge.getFormatString(), gauge.getDecimals(), value));
    if (gauge.isLcdVisible()) {
        valueText.setTranslateX((0.691 * size - valueText.getLayoutBounds().getWidth()));
    } else {
        valueText.setTranslateX((size - valueText.getLayoutBounds().getWidth()) * 0.5);
    }

    if (gauge.isAverageVisible()) drawAverage();
}

开发者ID:HanSolo，项目名称:Medusa，代码行数:34，代码来源:GaugeSkin.java

示例18: drawAverage

import eu.hansolo.medusa.Gauge.ScaleDirection; //导入依赖的package包/类
private void drawAverage() {
    double centerX = size * 0.5;
    double centerY = size * 0.5;
    // Draw average
    average.getElements().clear();
    double averageAngle;
    if (ScaleDirection.CLOCKWISE == scaleDirection) {
        averageAngle = startAngle - (gauge.getAverage() - minValue) * angleStep;
    } else {
        averageAngle = startAngle + (gauge.getAverage() - minValue) * angleStep;
    }
    double averageSize = Helper.clamp(3.0, 3.5, 0.01 * size);
    double sinValue      = Math.sin(Math.toRadians(averageAngle));
    double cosValue      = Math.cos(Math.toRadians(averageAngle));
    switch (tickLabelLocation) {
        case OUTSIDE:
            average.getElements().add(new MoveTo(centerX + size * 0.38 * sinValue, centerY + size * 0.38 * cosValue));
            sinValue = Math.sin(Math.toRadians(averageAngle - averageSize));
            cosValue = Math.cos(Math.toRadians(averageAngle - averageSize));
            average.getElements().add(new LineTo(centerX + size * 0.34 * sinValue, centerY + size * 0.34 * cosValue));
            sinValue = Math.sin(Math.toRadians(averageAngle + averageSize));
            cosValue = Math.cos(Math.toRadians(averageAngle + averageSize));
            average.getElements().add(new LineTo(centerX + size * 0.34 * sinValue, centerY + size * 0.34 * cosValue));
            average.getElements().add(new ClosePath());
            break;
        case INSIDE:
        default:
            average.getElements().add(new MoveTo(centerX + size * 0.465 * sinValue, centerY + size * 0.465 * cosValue));
            sinValue = Math.sin(Math.toRadians(averageAngle - averageSize));
            cosValue = Math.cos(Math.toRadians(averageAngle - averageSize));
            average.getElements().add(new LineTo(centerX + size * 0.425 * sinValue, centerY + size * 0.425 * cosValue));
            sinValue = Math.sin(Math.toRadians(averageAngle + averageSize));
            cosValue = Math.cos(Math.toRadians(averageAngle + averageSize));
            average.getElements().add(new LineTo(centerX + size * 0.425 * sinValue, centerY + size * 0.425 * cosValue));
            average.getElements().add(new ClosePath());
            break;
    }
    average.setFill(gauge.getAverageColor());
    average.setStroke(gauge.getTickMarkColor());
}

开发者ID:HanSolo，项目名称:Medusa，代码行数:41，代码来源:GaugeSkin.java

示例19: getStartAngle

import eu.hansolo.medusa.Gauge.ScaleDirection; //导入依赖的package包/类
private double getStartAngle() {
    ScaleDirection scaleDirection = gauge.getScaleDirection();
    switch(scaleDirection) {
        //case COUNTER_CLOCKWISE: return 180 - angleRange * 0.5;
        case CLOCKWISE        :
        default               : return 180 + angleRange * 0.5;
    }
}

开发者ID:HanSolo，项目名称:Medusa，代码行数:9，代码来源:IndicatorSkin.java

示例20: AngleConicalGradient

import eu.hansolo.medusa.Gauge.ScaleDirection; //导入依赖的package包/类
public AngleConicalGradient(final double CENTER_X, final double CENTER_Y, final double OFFSET_ANGLE, final Map<Double, Color> ANGLE_STOP_MAP, final ScaleDirection DIRECTION) {
    final double ANGLE_FACTOR = 1.0 / 360.0;
    double       offset       = Helper.clamp(0, 1, (OFFSET_ANGLE % 360.0) * ANGLE_FACTOR);
    List<Stop>   stops        = new ArrayList<>();
    for (double fraction : ANGLE_STOP_MAP.keySet()) {
        stops.add(new Stop(Helper.clamp(0, 1, (fraction % 360.0) * ANGLE_FACTOR), ANGLE_STOP_MAP.get(fraction)));
    }
    gradient = new ConicalGradient(CENTER_X, CENTER_Y, offset, DIRECTION, stops);
}

开发者ID:HanSolo，项目名称:Medusa，代码行数:10，代码来源:AngleConicalGradient.java

注：本文中的eu.hansolo.medusa.Gauge.ScaleDirection类示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

Java Op1类代码示例发布时间：2022-05-22

Java JhlClientAdapterFactory类代码示例发布时间：2022-05-22

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：17994|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9575|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8130|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8514|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8417|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9314|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8380|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7813|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8368|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7363|2022-11-06

客服电话

电子邮件

Java ScaleDirection类代码示例

示例1: drawGradientBar

示例2: rotateNeedle

示例3: drawGradientBar

示例4: drawGradientBar

示例5: rotateNeedle

示例6: drawGradientBar

示例7: drawGradientBar

示例8: drawGradientBar

示例9: normalizeStops

示例10: rotateNeedle

示例11: drawAverage

示例12: getStartAngle

示例13: getStartAngle

示例14: rotateNeedle

示例15: drawAverage

示例16: getStartAngle

示例17: rotateNeedle

示例18: drawAverage

示例19: getStartAngle

示例20: AngleConicalGradient

请发表评论

全部评论

上一篇：

下一篇：

bradtraversy/iweather: Ionic 3 mobile we

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

微信小程序的加密与解密--java

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053