Java ZNetRxResponse类代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› Java›Java编程经验

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Java中com.rapplogic.xbee.api.zigbee.ZNetRxResponse类的典型用法代码示例。如果您正苦于以下问题：Java ZNetRxResponse类的具体用法？Java ZNetRxResponse怎么用？Java ZNetRxResponse使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。

ZNetRxResponse类属于com.rapplogic.xbee.api.zigbee包，在下文中一共展示了ZNetRxResponse类的9个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Java代码示例。

示例1: processResponse

import com.rapplogic.xbee.api.zigbee.ZNetRxResponse; //导入依赖的package包/类
public void processResponse(XBeeResponse response)
{
    if (response.getApiId() == ApiId.ZNET_RX_RESPONSE)
    {
        ZNetRxResponse rx = (ZNetRxResponse) response;
        XBeeAddress64 addr = rx.getRemoteAddress64();

        int[] payload = rx.getData();

        switch (payload[0]) {
            case 2:
                log.debug("Adding ID: " + payload[1] + " to address " + addr);
                chessbots.add(addr, (Integer) payload[1]);
                break;
        }

        chessbots.updateMessageReceived(addr, rx);
    }
}

开发者ID:utdrobotchess，项目名称:chess-game，代码行数:20，代码来源:ChessbotCommunicator.java

示例2: processResponse

import com.rapplogic.xbee.api.zigbee.ZNetRxResponse; //导入依赖的package包/类
public void processResponse(XBeeResponse response)
{
    if (response.getApiId() == ApiId.ZNET_RX_RESPONSE)
    {
        ZNetRxResponse rx = (ZNetRxResponse) response;
        XBeeAddress64 addr = rx.getRemoteAddress64();

        int[] payload = rx.getData();

        if(payload[0] == 2)
        {
            botAddresses.set(payload[1], addr);
            log.debug(rx);
        }

    }
}

开发者ID:utdrobotchess，项目名称:chess-game，代码行数:18，代码来源:BotFinder.java

示例3: updateMessageReceived

import com.rapplogic.xbee.api.zigbee.ZNetRxResponse; //导入依赖的package包/类
public void updateMessageReceived(XBeeAddress64 addr, ZNetRxResponse msg) {
    ChessbotInfo chessbotInfo = getChessbotInfoFromAddress(addr);
    int chessbotInfoIndex = chessbotArr.indexOf(chessbotInfo);
    chessbotInfo.setLastTimeCommunicated(new Date());
    chessbotInfo.setLastMessageReceived(msg);
    chessbotArr.set(chessbotInfoIndex, chessbotInfo);
    updated = true;
}

开发者ID:utdrobotchess，项目名称:chess-game，代码行数:9，代码来源:ChessbotInfoArrayHandler.java

示例4: processResponse

import com.rapplogic.xbee.api.zigbee.ZNetRxResponse; //导入依赖的package包/类
@Override
public void processResponse(XBeeResponse response) {
	if (response.getApiId() == ApiId.ZNET_RX_RESPONSE) {
		final ZNetRxResponse rxResponse = (ZNetRxResponse) response;
		final String message = ByteUtils.toString(rxResponse.getData());
		final String remoteAddress = FormatUtil.readableAddress(rxResponse.getRemoteAddress64().getAddress());

		processResponse(message, remoteAddress);
	}
}

开发者ID:openhab，项目名称:openhab1-addons，代码行数:11，代码来源:DiyOnXBeeBinding.java

示例5: ZNetReceiverExample

import com.rapplogic.xbee.api.zigbee.ZNetRxResponse; //导入依赖的package包/类
private ZNetReceiverExample() throws Exception {
	XBee xbee = new XBee();		

	try {			
		// replace with the com port of your receiving XBee (typically your end device)
		// router
		xbee.open("/dev/tty.usbserial-A6005uPi", 9600);
		
		while (true) {

			try {
				// we wait here until a packet is received.
				XBeeResponse response = xbee.getResponse();
				
				log.info("received response " + response.toString());
				
				if (response.getApiId() == ApiId.ZNET_RX_RESPONSE) {
					// we received a packet from ZNetSenderTest.java
					ZNetRxResponse rx = (ZNetRxResponse) response;
					
					log.info("Received RX packet, option is " + rx.getOption() + ", sender 64 address is " + ByteUtils.toBase16(rx.getRemoteAddress64().getAddress()) + ", remote 16-bit address is " + ByteUtils.toBase16(rx.getRemoteAddress16().getAddress()) + ", data is " + ByteUtils.toBase16(rx.getData()));

					// optionally we may want to get the signal strength (RSSI) of the last hop.
					// keep in mind if you have routers in your network, this will be the signal of the last hop.
					AtCommand at = new AtCommand("DB");
					xbee.sendAsynchronous(at);
					XBeeResponse atResponse = xbee.getResponse();
					
					if (atResponse.getApiId() == ApiId.AT_RESPONSE) {
						// remember rssi is a negative db value
						log.info("RSSI of last response is " + -((AtCommandResponse)atResponse).getValue()[0]);
					} else {
						// we didn't get an AT response
						log.info("expected RSSI, but received " + atResponse.toString());
					}
				} else {
					log.debug("received unexpected packet " + response.toString());
				}
			} catch (Exception e) {
				log.error(e);
			}
		}
	} finally {
		if (xbee != null && xbee.isConnected()) {
			xbee.close();		
		}
	}
}

开发者ID:andrewrapp，项目名称:xbee-api，代码行数:49，代码来源:ZNetReceiverExample.java

示例6: open

import com.rapplogic.xbee.api.zigbee.ZNetRxResponse; //导入依赖的package包/类
@Override
protected void open(final Map<String, Object> context) throws Exception {

	if (context.get("connectionType") instanceof LocalConnection) {
		LocalConnection localConnection = (LocalConnection) context.get("connectionType");
		xbee.open((String) localConnection.getSerialPort(), localConnection.getBaudRate());
	} else {
		SerialServerConnection ser = (SerialServerConnection) context.get("connectionType");
		xbee.initProviderConnection((XBeeConnection)new SocketXBeeConnection(ser.getHost(), ser.getPort()));
	}

	final boolean verbose = (Boolean) context.get("verbose");
	
	xbee.addPacketListener(new PacketListener() {
		@Override
		public void processResponse(XBeeResponse response) {
			if (response.getApiId() == ApiId.ZNET_RX_RESPONSE || response.getApiId() == ApiId.RX_64_RESPONSE) {	
				if (verbose) {
					System.out.println("Received rx packet from arduino " + response);							
				}

				if (response.getApiId() == ApiId.ZNET_RX_RESPONSE) {
					ZNetRxResponse zb = (ZNetRxResponse) response;
					
					if (zb.getData()[0] == MAGIC_BYTE1 && zb.getData()[1] == MAGIC_BYTE2) {
						addReply(zb.getData());
					} else {
						System.out.println("Ignoring non-programming packet " + zb);
					}						
				} else {
					RxResponse rx64 = (RxResponse64) response;
					
					if (rx64.getData()[0] == MAGIC_BYTE1 && rx64.getData()[1] == MAGIC_BYTE2) {
						addReply(rx64.getData());
					} else {
						System.out.println("Ignoring non-programming packet " + rx64);
					}							
				}
			} else if (response.getApiId() == ApiId.ZNET_TX_STATUS_RESPONSE) {
				ZNetTxStatusResponse zNetTxStatusResponse = (ZNetTxStatusResponse) response;
				
				if (zNetTxStatusResponse.isSuccess()) {
					// yay					
				} else {
					// interrupt thread in case it's waiting for ack, which will never come
					System.out.println("Failed to deliver packet. Interrupting main thread. Response: " + response);
					interrupt();
				}
			} else if (response.getApiId() == ApiId.TX_STATUS_RESPONSE) {
				TxStatusResponse txStatusResponse = (TxStatusResponse) response;
				
				if (txStatusResponse.isSuccess()) {
					// yay					
				} else {
					// interrupt thread in case it's waiting for ack, which will never come
					System.out.println("Failed to deliver packet. Interrupting main thread. Response: " + response);
					interrupt();
				}
			}
		}
	});
}

开发者ID:andrewrapp，项目名称:arduino-remote-uploader，代码行数:63，代码来源:XBeeSketchUploader.java

示例7: ZNetReceiverExample

import com.rapplogic.xbee.api.zigbee.ZNetRxResponse; //导入依赖的package包/类
private ZNetReceiverExample() throws Exception {
	XBee xbee = new XBee();		

	try {			
		// replace with the com port of your receiving XBee (typically your end device)
		// router
		xbee.open("/dev/tty.usbserial-A6005uPi", 9600);
		
		while (true) {

			try {
				// we wait here until a packet is received.
				XBeeResponse response = xbee.getResponse();
				
				log.info("received response " + response.toString());
				
				if (response.getApiId() == ApiId.ZNET_RX_RESPONSE) {
					// we received a packet from ZNetSenderTest.java
					ZNetRxResponse rx = (ZNetRxResponse) response;
					
					log.info("Received RX packet, option is " + rx.getOption() + ", sender 64 address is " + ByteUtils.toBase16(rx.getRemoteAddress64().getAddress()) + ", remote 16-bit address is " + ByteUtils.toBase16(rx.getRemoteAddress16().getAddress()) + ", data is " + ByteUtils.toBase16(rx.getData()));

					// optionally we may want to get the signal strength (RSSI) of the last hop.
					// keep in mind if you have routers in your network, this will be the signal of the last hop.
					AtCommand at = new AtCommand("DB");
					xbee.sendAsynchronous(at);
					XBeeResponse atResponse = xbee.getResponse();
					
					if (atResponse.getApiId() == ApiId.AT_RESPONSE) {
						// remember rssi is a negative db value
						log.info("RSSI of last response is " + -((AtCommandResponse)atResponse).getValue()[0]);
					} else {
						// we didn't get an AT response
						log.info("expected RSSI, but received " + atResponse.toString());
					}
				} else {
					log.debug("received unexpected packet " + response.toString());
				}
			} catch (Exception e) {
				log.error(e);
			}
		}
	} finally {
		if (xbee.isConnected()) {
			xbee.close();
		}
	}
}

开发者ID:allanlang，项目名称:xbee-api-jssc，代码行数:49，代码来源:ZNetReceiverExample.java

示例8: getLastMessageReceived

import com.rapplogic.xbee.api.zigbee.ZNetRxResponse; //导入依赖的package包/类
public ZNetRxResponse getLastMessageReceived() {
    return lastMessageReceived;
}

开发者ID:utdrobotchess，项目名称:chess-game，代码行数:4，代码来源:ChessbotInfo.java

示例9: setLastMessageReceived

import com.rapplogic.xbee.api.zigbee.ZNetRxResponse; //导入依赖的package包/类
public void setLastMessageReceived(ZNetRxResponse lastMessageReceived) {
    this.lastMessageReceived = lastMessageReceived;
}

开发者ID:utdrobotchess，项目名称:chess-game，代码行数:4，代码来源:ChessbotInfo.java

注：本文中的com.rapplogic.xbee.api.zigbee.ZNetRxResponse类示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

Java PropertyChange类代码示例发布时间：2022-05-22

Java EntityComplexPart类代码示例发布时间：2022-05-22

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：17998|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9577|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8131|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8515|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8418|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9315|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8381|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7814|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8369|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7365|2022-11-06

客服电话

电子邮件

Java ZNetRxResponse类代码示例

示例1: processResponse

示例2: processResponse

示例3: updateMessageReceived

示例4: processResponse

示例5: ZNetReceiverExample

示例6: open

示例7: ZNetReceiverExample

示例8: getLastMessageReceived

示例9: setLastMessageReceived

请发表评论

全部评论

上一篇：

下一篇：

librespeed/speedtest: Self-hosted Speedt

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

alexjoverm/typescript-library-starter: S

medfreeman/markdown-it-toc-and-anchor: m

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053