Java MCP23017Pin类代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› Java›Java编程经验

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Java中com.pi4j.gpio.extension.mcp.MCP23017Pin类的典型用法代码示例。如果您正苦于以下问题：Java MCP23017Pin类的具体用法？Java MCP23017Pin怎么用？Java MCP23017Pin使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。

MCP23017Pin类属于com.pi4j.gpio.extension.mcp包，在下文中一共展示了MCP23017Pin类的7个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Java代码示例。

示例1: PumpDiagGuiSingle

import com.pi4j.gpio.extension.mcp.MCP23017Pin; //导入依赖的package包/类
/**
 * Creates new form MainWindow
 *
 * @throws com.pi4j.io.i2c.I2CFactory.UnsupportedBusNumberException
 * @throws java.io.IOException
 */
public PumpDiagGuiSingle() throws I2CFactory.UnsupportedBusNumberException, IOException, IOException, InterruptedException {
    gpio = GpioFactory.getInstance(); // Singleton instance
    mcpProvider = new MCP23017GpioProvider(I2CBus.BUS_1, 0x23);

    // Provision direction control pins as outputs
    System.out.println("Provisioning direction pin");
    dir = gpio.provisionDigitalOutputPin(mcpProvider, MCP23017Pin.GPIO_A7, "Direction", PinState.LOW);

    // Provision step control pins as outputs
    System.out.println("Provisioning step pin");
    step = gpio.provisionDigitalOutputPin(mcpProvider, MCP23017Pin.GPIO_A6, "Step", PinState.LOW);

    // Provision enable pins as outputs. 
    // Note that the pin state "high" means the pump is disabled;
    // the enable pump on the chip is inverted.
    System.out.println("Provisioning enable pin");
    enable = gpio.provisionDigitalOutputPin(mcpProvider, MCP23017Pin.GPIO_A5, "~Enable", PinState.HIGH);
}

开发者ID:uwigem，项目名称:uwigem2017，代码行数:25，代码来源:PumpDiagGuiSingle.java

示例2: initPins

import com.pi4j.gpio.extension.mcp.MCP23017Pin; //导入依赖的package包/类
private void initPins() {
    this.pins = new GpioPinDigitalOutput[16];

    int k = 0;
    for (Pin p : MCP23017Pin.ALL) {
        this.pins[k] = this.pins[k] = gpioCtrl.provisionDigitalOutputPin(provider, p, "MCP " + p.getName(), PinState.LOW);
        k++;
    }
}

开发者ID:uwigem，项目名称:uwigem2017，代码行数:10，代码来源:McpOutputController.java

示例3: addMcp

import com.pi4j.gpio.extension.mcp.MCP23017Pin; //导入依赖的package包/类
/**
 * Add a new MCP23017 GPIO expander chip to the manager. This allows the
 * assignment of 16 additional GPIO pins.
 *
 * Note that each chip assigned must have a different address.
 *
 * @param address The I2C address of the chip, in the range 0x20 to 0x27
 * @throws I2CFactory.UnsupportedBusNumberException If the bus # is invalid.
 * @throws IOException If the chip can't be communicated with.
 */
public void addMcp(int bus, int address)
        throws I2CFactory.UnsupportedBusNumberException, IOException {
    GpioProvider provider = new MCP23017GpioProvider(bus, address);
    for (Pin mcpPin : MCP23017Pin.ALL) {
        String name = mcpPin.getName() + " " + Integer.toHexString(address);
        NamedPin newPin = new NamedPin(name, mcpPin, provider);
        this.availablePins.add(newPin);
    }

}

开发者ID:uwigem，项目名称:uwigem2017，代码行数:21，代码来源:GpioManager.java

示例4: main

import com.pi4j.gpio.extension.mcp.MCP23017Pin; //导入依赖的package包/类
public static void main(String args[]) throws InterruptedException, UnsupportedBusNumberException, IOException {

        System.out.println("<--Pi4J--> MCP23017 GPIO Example ... started.");

        // create gpio controller
        final GpioController gpio = GpioFactory.getInstance();

        // create custom MCP23017 GPIO provider
        final MCP23017GpioProvider provider = new MCP23017GpioProvider(I2CBus.BUS_1, 0x21);

        // provision gpio input pins from MCP23017
        GpioPinDigitalInput myInputs[] = {
                gpio.provisionDigitalInputPin(provider, MCP23017Pin.GPIO_A0, "MyInput-A0", PinPullResistance.PULL_UP),
                gpio.provisionDigitalInputPin(provider, MCP23017Pin.GPIO_A1, "MyInput-A1", PinPullResistance.PULL_UP),
                gpio.provisionDigitalInputPin(provider, MCP23017Pin.GPIO_A2, "MyInput-A2", PinPullResistance.PULL_UP),
                gpio.provisionDigitalInputPin(provider, MCP23017Pin.GPIO_A3, "MyInput-A3", PinPullResistance.PULL_UP),
                gpio.provisionDigitalInputPin(provider, MCP23017Pin.GPIO_A4, "MyInput-A4", PinPullResistance.PULL_UP),
                gpio.provisionDigitalInputPin(provider, MCP23017Pin.GPIO_A5, "MyInput-A5", PinPullResistance.PULL_UP),
                gpio.provisionDigitalInputPin(provider, MCP23017Pin.GPIO_A6, "MyInput-A6", PinPullResistance.PULL_UP),
                gpio.provisionDigitalInputPin(provider, MCP23017Pin.GPIO_A7, "MyInput-A7", PinPullResistance.PULL_UP),
            };

        // create and register gpio pin listener
        gpio.addListener(new GpioPinListenerDigital() {
            @Override
            public void handleGpioPinDigitalStateChangeEvent(GpioPinDigitalStateChangeEvent event) {
                // display pin state on console
                System.out.println(" --> GPIO PIN STATE CHANGE: " + event.getPin() + " = "
                        + event.getState());
            }
        }, myInputs);

        // provision gpio output pins and make sure they are all LOW at startup
        GpioPinDigitalOutput myOutputs[] = {
            gpio.provisionDigitalOutputPin(provider, MCP23017Pin.GPIO_B0, "MyOutput-B0", PinState.LOW),
            gpio.provisionDigitalOutputPin(provider, MCP23017Pin.GPIO_B1, "MyOutput-B1", PinState.LOW),
            gpio.provisionDigitalOutputPin(provider, MCP23017Pin.GPIO_B2, "MyOutput-B2", PinState.LOW),
            gpio.provisionDigitalOutputPin(provider, MCP23017Pin.GPIO_B3, "MyOutput-B3", PinState.LOW),
            gpio.provisionDigitalOutputPin(provider, MCP23017Pin.GPIO_B4, "MyOutput-B4", PinState.LOW),
            gpio.provisionDigitalOutputPin(provider, MCP23017Pin.GPIO_B5, "MyOutput-B5", PinState.LOW),
            gpio.provisionDigitalOutputPin(provider, MCP23017Pin.GPIO_B6, "MyOutput-B6", PinState.LOW),
            gpio.provisionDigitalOutputPin(provider, MCP23017Pin.GPIO_B7, "MyOutput-B7", PinState.LOW)
          };

        // keep program running for 20 seconds
        for (int count = 0; count < 10; count++) {
            gpio.setState(true, myOutputs);
            Thread.sleep(1000);
            gpio.setState(false, myOutputs);
            Thread.sleep(1000);
        }

        // stop all GPIO activity/threads by shutting down the GPIO controller
        // (this method will forcefully shutdown all GPIO monitoring threads and scheduled tasks)
        gpio.shutdown();

        System.out.println("Exiting MCP23017GpioExample");
    }

开发者ID:uwigem，项目名称:uwigem2017，代码行数:59，代码来源:MCP23017GpioExample.java

示例5: main

import com.pi4j.gpio.extension.mcp.MCP23017Pin; //导入依赖的package包/类
public static void main(String args[]) throws InterruptedException, UnsupportedBusNumberException, IOException {

        System.out.println("<--Pi4J--> MCP23017 GPIO Example ... started.");

        // create gpio controller
        final GpioController gpio = GpioFactory.getInstance();

        // create custom MCP23017 GPIO provider
        final MCP23017GpioProvider provider = new MCP23017GpioProvider(I2CBus.BUS_1, 0x20);
        
        
        
        

        // provision gpio input pins from MCP23017
        GpioPinDigitalInput myInputs[] = {
                gpio.provisionDigitalInputPin(provider, MCP23017Pin.GPIO_A0, "MyInput-A0", PinPullResistance.OFF),
                gpio.provisionDigitalInputPin(provider, MCP23017Pin.GPIO_A1, "MyInput-A1", PinPullResistance.OFF),
                gpio.provisionDigitalInputPin(provider, MCP23017Pin.GPIO_A2, "MyInput-A2", PinPullResistance.OFF),
                gpio.provisionDigitalInputPin(provider, MCP23017Pin.GPIO_A3, "MyInput-A3", PinPullResistance.OFF),
                gpio.provisionDigitalInputPin(provider, MCP23017Pin.GPIO_A4, "MyInput-A4", PinPullResistance.OFF),
                gpio.provisionDigitalInputPin(provider, MCP23017Pin.GPIO_A5, "MyInput-A5", PinPullResistance.OFF),
                gpio.provisionDigitalInputPin(provider, MCP23017Pin.GPIO_A6, "MyInput-A6", PinPullResistance.OFF),
                gpio.provisionDigitalInputPin(provider, MCP23017Pin.GPIO_A7, "MyInput-A7", PinPullResistance.OFF),
            };

        // create and register gpio pin listener
        gpio.addListener(new GpioPinListenerDigital() {
            @Override
            public void handleGpioPinDigitalStateChangeEvent(GpioPinDigitalStateChangeEvent event) {
                // display pin state on console
                System.out.println(" --> GPIO PIN STATE CHANGE: " + event.getPin() + " = "
                        + event.getState());
            }
        }, myInputs);

        // provision gpio output pins and make sure they are all LOW at startup
        GpioPinDigitalOutput myOutputs[] = {
            gpio.provisionDigitalOutputPin(provider, MCP23017Pin.GPIO_B0, "MyOutput-B0", PinState.LOW),
            gpio.provisionDigitalOutputPin(provider, MCP23017Pin.GPIO_B1, "MyOutput-B1", PinState.LOW),
            gpio.provisionDigitalOutputPin(provider, MCP23017Pin.GPIO_B2, "MyOutput-B2", PinState.LOW),
            gpio.provisionDigitalOutputPin(provider, MCP23017Pin.GPIO_B3, "MyOutput-B3", PinState.LOW),
            gpio.provisionDigitalOutputPin(provider, MCP23017Pin.GPIO_B4, "MyOutput-B4", PinState.LOW),
            gpio.provisionDigitalOutputPin(provider, MCP23017Pin.GPIO_B5, "MyOutput-B5", PinState.LOW),
            gpio.provisionDigitalOutputPin(provider, MCP23017Pin.GPIO_B6, "MyOutput-B6", PinState.LOW),
            gpio.provisionDigitalOutputPin(provider, MCP23017Pin.GPIO_B7, "MyOutput-B7", PinState.LOW)
          };
        
        

        // keep program running for 20 seconds
        for (int count = 0; count < 1000; count++) {
            gpio.setState(true, myOutputs);
            Thread.sleep(1000);
            gpio.setState(false, myOutputs);
            Thread.sleep(1000);
        }

        // stop all GPIO activity/threads by shutting down the GPIO controller
        // (this method will forcefully shutdown all GPIO monitoring threads and scheduled tasks)
        gpio.shutdown();

        System.out.println("Exiting MCP23017GpioExample");
    }

开发者ID:uwigem，项目名称:uwigem2017，代码行数:65，代码来源:MCP23017E.java

示例6: PumpDiagGui

import com.pi4j.gpio.extension.mcp.MCP23017Pin; //导入依赖的package包/类
/**
 * Creates new form MainWindow
 * @throws com.pi4j.io.i2c.I2CFactory.UnsupportedBusNumberException
 * @throws java.io.IOException
 */
public PumpDiagGui() throws I2CFactory.UnsupportedBusNumberException, IOException, IOException {
    gpio = GpioFactory.getInstance(); // Singleton instance
    mcpProviderOne = new MCP23017GpioProvider(I2CBus.BUS_1, 0x27);
    //mcpProviderTwo = new MCP23017GpioProvider(I2CBus.BUS_1, 0x23);

    // Provision direction control pins as outputs
    GpioPinDigitalOutput dir1 = gpio.provisionDigitalOutputPin(mcpProviderOne, MCP23017Pin.GPIO_A7, "Pump 1 Direction", PinState.LOW);
    GpioPinDigitalOutput dir2 = gpio.provisionDigitalOutputPin(mcpProviderOne, MCP23017Pin.GPIO_B0, "Pump 2 Direction", PinState.LOW);
    GpioPinDigitalOutput dir3 = gpio.provisionDigitalOutputPin(mcpProviderOne, MCP23017Pin.GPIO_A4, "Pump 3 Direction", PinState.LOW);

    // Provision step control pins as outputs
    GpioPinDigitalOutput step1 = gpio.provisionDigitalOutputPin(mcpProviderOne, MCP23017Pin.GPIO_A6, "Pump 1 Step", PinState.LOW);
    GpioPinDigitalOutput step2 = gpio.provisionDigitalOutputPin(mcpProviderOne, MCP23017Pin.GPIO_B1, "Pump 2 Step", PinState.LOW);
    GpioPinDigitalOutput step3 = gpio.provisionDigitalOutputPin(mcpProviderOne, MCP23017Pin.GPIO_A3, "Pump 3 Step", PinState.LOW);

    // Provision enable pins as outputs. 
    // Note that the pin state "high" means the pump is disabled;
    // the enable pump on the chip is inverted.
    GpioPinDigitalOutput enable1 = gpio.provisionDigitalOutputPin(mcpProviderOne, MCP23017Pin.GPIO_A5, "Pump 1 ~Enable", PinState.HIGH);
    GpioPinDigitalOutput enable2 = gpio.provisionDigitalOutputPin(mcpProviderOne, MCP23017Pin.GPIO_B7, "Pump 2 ~Enable", PinState.HIGH);
    GpioPinDigitalOutput enable3 = gpio.provisionDigitalOutputPin(mcpProviderOne, MCP23017Pin.GPIO_A2, "Pump 3 ~Enable", PinState.HIGH);

    // Provision end-stop pins as inputs. 
    // These pins tell the pump when the syringe
    // is in its MINIMUM possible position (empty).
    GpioPinDigitalInput min1 = gpio.provisionDigitalInputPin(RaspiPin.GPIO_07, "Pump 1 Min (BCM 4)", PinPullResistance.PULL_UP);
    GpioPinDigitalInput min2 = gpio.provisionDigitalInputPin(RaspiPin.GPIO_00, "Pump 2 Min (BCM 17)", PinPullResistance.PULL_UP);
    GpioPinDigitalInput min3 = gpio.provisionDigitalInputPin(RaspiPin.GPIO_02, "Pump 3 Min (BCM 27)", PinPullResistance.PULL_UP);

    // Provision end-stop pins as inputs.
    // These pins tell the pump when the syringe
    // is in its MAXIMUM possible position (full).
    GpioPinDigitalInput max1 = gpio.provisionDigitalInputPin(RaspiPin.GPIO_27, "Pump 1 Max (BCM 16)", PinPullResistance.PULL_UP);
    GpioPinDigitalInput max2 = gpio.provisionDigitalInputPin(RaspiPin.GPIO_28, "Pump 2 Max (BCM 20)", PinPullResistance.PULL_UP);
    GpioPinDigitalInput max3 = gpio.provisionDigitalInputPin(RaspiPin.GPIO_29, "Pump 3 Max (BCM 21)", PinPullResistance.PULL_UP);

    pump1 = new SyringePump(step1, dir1, enable1, min1, max1);
    pump2 = new SyringePump(step2, dir2, enable2, min2, max2);
    pump3 = new SyringePump(step3, dir3, enable3, min3, max3);

    pump1.setStepDelay(1);
    pump2.setStepDelay(1);
    pump3.setStepDelay(1);
    
   
    
    initComponents();

}

开发者ID:uwigem，项目名称:uwigem2017，代码行数:55，代码来源:PumpDiagGui.java

示例7: main

import com.pi4j.gpio.extension.mcp.MCP23017Pin; //导入依赖的package包/类
public static void main(String args[]) throws InterruptedException, IOException {
    
    System.out.println("<--Pi4J--> MCP23017 GPIO Example ... started.");
    
    // create gpio controller
    final GpioController gpio = GpioFactory.getInstance();
    
    // create custom MCP23017 GPIO provider
    final MCP23017GpioProvider gpioProvider = new MCP23017GpioProvider(I2CBus.BUS_1, 0x21);
    
    // provision gpio input pins from MCP23017
    GpioPinDigitalInput myInputs[] = {
            gpio.provisionDigitalInputPin(gpioProvider, MCP23017Pin.GPIO_A0, "MyInput-A0", PinPullResistance.PULL_UP),
            gpio.provisionDigitalInputPin(gpioProvider, MCP23017Pin.GPIO_A1, "MyInput-A1", PinPullResistance.PULL_UP),
            gpio.provisionDigitalInputPin(gpioProvider, MCP23017Pin.GPIO_A2, "MyInput-A2", PinPullResistance.PULL_UP),
            gpio.provisionDigitalInputPin(gpioProvider, MCP23017Pin.GPIO_A3, "MyInput-A3", PinPullResistance.PULL_UP),
            gpio.provisionDigitalInputPin(gpioProvider, MCP23017Pin.GPIO_A4, "MyInput-A4", PinPullResistance.PULL_UP),
            gpio.provisionDigitalInputPin(gpioProvider, MCP23017Pin.GPIO_A5, "MyInput-A5", PinPullResistance.PULL_UP),
            gpio.provisionDigitalInputPin(gpioProvider, MCP23017Pin.GPIO_A6, "MyInput-A6", PinPullResistance.PULL_UP),
            gpio.provisionDigitalInputPin(gpioProvider, MCP23017Pin.GPIO_A7, "MyInput-A7", PinPullResistance.PULL_UP),
        };
    
    // create and register gpio pin listener
    gpio.addListener(new GpioPinListenerDigital() {
        @Override
        public void handleGpioPinDigitalStateChangeEvent(GpioPinDigitalStateChangeEvent event) {
            // display pin state on console
            System.out.println(" --> GPIO PIN STATE CHANGE: " + event.getPin() + " = "
                    + event.getState());
        }
    }, myInputs);
    
    // provision gpio output pins and make sure they are all LOW at startup
    GpioPinDigitalOutput myOutputs[] = { 
        gpio.provisionDigitalOutputPin(gpioProvider, MCP23017Pin.GPIO_B0, "MyOutput-B0", PinState.LOW),
        gpio.provisionDigitalOutputPin(gpioProvider, MCP23017Pin.GPIO_B1, "MyOutput-B1", PinState.LOW),
        gpio.provisionDigitalOutputPin(gpioProvider, MCP23017Pin.GPIO_B2, "MyOutput-B2", PinState.LOW),
        gpio.provisionDigitalOutputPin(gpioProvider, MCP23017Pin.GPIO_B3, "MyOutput-B3", PinState.LOW),
        gpio.provisionDigitalOutputPin(gpioProvider, MCP23017Pin.GPIO_B4, "MyOutput-B4", PinState.LOW),
        gpio.provisionDigitalOutputPin(gpioProvider, MCP23017Pin.GPIO_B5, "MyOutput-B5", PinState.LOW),
        gpio.provisionDigitalOutputPin(gpioProvider, MCP23017Pin.GPIO_B6, "MyOutput-B6", PinState.LOW),
        gpio.provisionDigitalOutputPin(gpioProvider, MCP23017Pin.GPIO_B7, "MyOutput-B7", PinState.LOW)
      };
    
    // keep program running for 20 seconds
    for (int count = 0; count < 10; count++) {
        gpio.setState(true, myOutputs);
        Thread.sleep(1000);
        gpio.setState(false, myOutputs);
        Thread.sleep(1000);
    }
    
    // stop all GPIO activity/threads by shutting down the GPIO controller
    // (this method will forcefully shutdown all GPIO monitoring threads and scheduled tasks)
    gpio.shutdown();                 
}

开发者ID:iot-labs，项目名称:communication，代码行数:57，代码来源:MCP23017GpioExample.java

注：本文中的com.pi4j.gpio.extension.mcp.MCP23017Pin类示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

Java RosRuntimeException类代码示例发布时间：2022-05-22

Java ShortParser类代码示例发布时间：2022-05-22

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18231|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9664|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8174|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8546|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8452|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9381|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8423|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7856|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8408|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7393|2022-11-06

客服电话

电子邮件

Java MCP23017Pin类代码示例

示例1: PumpDiagGuiSingle

示例2: initPins

示例3: addMcp

示例4: main

示例5: main

示例6: PumpDiagGui

示例7: main

请发表评论

全部评论

上一篇：

下一篇：

PacktPublishing/Python-Machine-Learning-

sussillo/hfopt-matlab: A parallel, cpu-b

鲁东大学一米网:Win7系统USB驱动器RAM的操

CVE-2022-34571

emersion/go-ostatus: An OStatus library

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053