PHP gen_code函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› PHP›PHP编程经验

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了PHP中gen_code函数的典型用法代码示例。如果您正苦于以下问题：PHP gen_code函数的具体用法？PHP gen_code怎么用？PHP gen_code使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了gen_code函数的3个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的PHP代码示例。

示例1: gen_vm


//.........这里部分代码省略.........
        out($f, "#endif\n");
        out($f, "\n");
        out($f, "\tLOAD_OPLINE();\n");
        out($f, "#if defined(ZEND_VM_FP_GLOBAL_REG) && defined(ZEND_VM_IP_GLOBAL_REG)\n");
        out($f, "\t((opcode_handler_t)OPLINE->handler)(ZEND_OPCODE_HANDLER_ARGS_PASSTHRU);\n");
        out($f, "\tif (EXPECTED(opline)) {\n");
        out($f, "\t\tret = execute_data != ex ? (int)(execute_data->prev_execute_data != ex) + 1 : 0;\n");
        out($f, "\t\tSAVE_OPLINE();\n");
        out($f, "\t} else {\n");
        out($f, "\t\tret = -1;\n");
        out($f, "\t}\n");
        out($f, "#else\n");
        out($f, "\tret = ((opcode_handler_t)OPLINE->handler)(ZEND_OPCODE_HANDLER_ARGS_PASSTHRU);\n");
        out($f, "\tSAVE_OPLINE();\n");
        out($f, "#endif\n");
        out($f, "#ifdef ZEND_VM_FP_GLOBAL_REG\n");
        out($f, "\texecute_data = orig_execute_data;\n");
        out($f, "#endif\n");
        out($f, "#ifdef ZEND_VM_IP_GLOBAL_REG\n");
        out($f, "\topline = orig_opline;\n");
        out($f, "#endif\n");
        out($f, "\treturn ret;\n");
        out($f, "}\n\n");
    } else {
        out($f, "ZEND_API int zend_vm_call_opcode_handler(zend_execute_data* ex)\n");
        out($f, "{\n");
        out($f, "\tzend_error_noreturn(E_CORE_ERROR, \"zend_vm_call_opcode_handler() is not supported\");\n");
        out($f, "\treturn 0;\n");
        out($f, "}\n\n");
    }
    // Export handlers and helpers
    if (count($export) > 0 && ZEND_VM_KIND != ZEND_VM_KIND_CALL) {
        out($f, "#undef OPLINE\n");
        out($f, "#undef DCL_OPLINE\n");
        out($f, "#undef USE_OPLINE\n");
        out($f, "#undef LOAD_OPLINE\n");
        out($f, "#undef LOAD_NEXT_OPLINE\n");
        out($f, "#undef SAVE_OPLINE\n");
        out($f, "#define OPLINE EX(opline)\n");
        out($f, "#define DCL_OPLINE\n");
        out($f, "#define USE_OPLINE const zend_op *opline = EX(opline);\n");
        out($f, "#define LOAD_OPLINE()\n");
        out($f, "#define LOAD_NEXT_OPLINE() ZEND_VM_INC_OPCODE()\n");
        out($f, "#define SAVE_OPLINE()\n");
        out($f, "#undef HANDLE_EXCEPTION\n");
        out($f, "#undef HANDLE_EXCEPTION_LEAVE\n");
        out($f, "#define HANDLE_EXCEPTION() LOAD_OPLINE(); ZEND_VM_CONTINUE()\n");
        out($f, "#define HANDLE_EXCEPTION_LEAVE() LOAD_OPLINE(); ZEND_VM_LEAVE()\n");
        out($f, "#undef ZEND_VM_CONTINUE\n");
        out($f, "#undef ZEND_VM_RETURN\n");
        out($f, "#undef ZEND_VM_ENTER\n");
        out($f, "#undef ZEND_VM_LEAVE\n");
        out($f, "#undef ZEND_VM_DISPATCH\n");
        out($f, "#define ZEND_VM_CONTINUE()   return  0\n");
        out($f, "#define ZEND_VM_RETURN()     return -1\n");
        out($f, "#define ZEND_VM_ENTER()      return  1\n");
        out($f, "#define ZEND_VM_LEAVE()      return  2\n");
        out($f, "#define ZEND_VM_DISPATCH(opcode, opline) return zend_vm_get_opcode_handler(opcode, opline)(ZEND_OPCODE_HANDLER_ARGS_PASSTHRU);\n\n");
        out($f, "\n");
    }
    foreach ($export as $dsk) {
        list($kind, $func, $name) = $dsk;
        out($f, "ZEND_API int {$func}(");
        if ($kind == "handler") {
            out($f, "ZEND_OPCODE_HANDLER_ARGS)\n");
            $code = $opcodes[$opnames[$name]]['code'];
        } else {
            $h = $helpers[$name];
            if ($h['param'] == null) {
                out($f, "ZEND_OPCODE_HANDLER_ARGS)\n");
            } else {
                out($f, $h['param'] . " ZEND_OPCODE_HANDLER_ARGS_DC)\n");
            }
            $code = $h['code'];
        }
        $done = 0;
        if (ZEND_VM_KIND == ZEND_VM_KIND_CALL) {
            if ($kind == "handler") {
                $op = $opcodes[$opnames[$name]];
                if (isset($op['op1']["ANY"]) && isset($op['op2']["ANY"])) {
                    out($f, "{\n\treturn " . $name . (ZEND_VM_SPEC ? "_SPEC" : "") . "_HANDLER(ZEND_OPCODE_HANDLER_ARGS_PASSTHRU);\n}\n\n");
                    $done = 1;
                }
            } else {
                if ($helpers[$name]["param"] == null) {
                    $h = $helpers[$name];
                    if (isset($h['op1']["ANY"]) && isset($h['op2']["ANY"])) {
                        out($f, "{\n\treturn " . $name . (ZEND_VM_SPEC ? "_SPEC" : "") . "(ZEND_OPCODE_HANDLER_ARGS_PASSTHRU);\n}\n\n");
                        $done = 1;
                    }
                }
            }
        }
        if (!$done) {
            gen_code($f, 0, ZEND_VM_KIND_CALL, 1, $code, 'ANY', 'ANY', $name);
        }
    }
    fclose($f);
    echo "zend_vm_execute.h generated successfully.\n";
}

开发者ID:sutandang，项目名称:php-src，代码行数:101，代码来源:zend_vm_gen.php

示例2: gen_vm


//.........这里部分代码省略.........
        out($f, "\t\t\t_UNUSED_CODE, /* 12             */\n");
        out($f, "\t\t\t_UNUSED_CODE, /* 13             */\n");
        out($f, "\t\t\t_UNUSED_CODE, /* 14             */\n");
        out($f, "\t\t\t_UNUSED_CODE, /* 15             */\n");
        out($f, "\t\t\t_CV_CODE      /* 16 = IS_CV     */\n");
        out($f, "\t\t};\n");
        out($f, "\t\treturn zend_opcode_handlers[opcode * 25 + zend_vm_decode[op->op1_type] * 5 + zend_vm_decode[op->op2_type]];\n");
        if (ZEND_VM_OLD_EXECUTOR) {
            out($f, "\t}\n");
        }
    }
    out($f, "}\n\n");
    // Generate zend_vm_get_opcode_handler() function
    out($f, "ZEND_API void zend_vm_set_opcode_handler(zend_op* op)\n");
    out($f, "{\n");
    out($f, "\top->handler = zend_vm_get_opcode_handler(zend_user_opcodes[op->opcode], op);\n");
    out($f, "}\n\n");
    // Export handlers and helpers
    if (count($export) > 0 && !ZEND_VM_OLD_EXECUTOR && ZEND_VM_KIND != ZEND_VM_KIND_CALL) {
        out($f, "#undef OPLINE\n");
        out($f, "#undef DCL_OPLINE\n");
        out($f, "#undef USE_OPLINE\n");
        out($f, "#undef LOAD_OPLINE\n");
        out($f, "#undef SAVE_OPLINE\n");
        out($f, "#define OPLINE EX(opline)\n");
        out($f, "#define DCL_OPLINE\n");
        out($f, "#define USE_OPLINE zend_op *opline = EX(opline);\n");
        out($f, "#define LOAD_OPLINE()\n");
        out($f, "#define SAVE_OPLINE()\n");
        out($f, "#undef CHECK_EXCEPTION\n");
        out($f, "#undef HANDLE_EXCEPTION\n");
        out($f, "#undef HANDLE_EXCEPTION_LEAVE\n");
        out($f, "#define CHECK_EXCEPTION() LOAD_OPLINE()\n");
        out($f, "#define HANDLE_EXCEPTION() LOAD_OPLINE(); ZEND_VM_CONTINUE()\n");
        out($f, "#define HANDLE_EXCEPTION_LEAVE() LOAD_OPLINE(); ZEND_VM_LEAVE()\n");
        out($f, "#undef ZEND_VM_CONTINUE\n");
        out($f, "#undef ZEND_VM_RETURN\n");
        out($f, "#undef ZEND_VM_ENTER\n");
        out($f, "#undef ZEND_VM_LEAVE\n");
        out($f, "#undef ZEND_VM_DISPATCH\n");
        out($f, "#undef ZEND_OPCODE_HANDLER_ARGS_PASSTHRU_INTERNAL\n\n");
        out($f, "#define ZEND_VM_CONTINUE()   return 0\n");
        out($f, "#define ZEND_VM_RETURN()     return 1\n");
        out($f, "#define ZEND_VM_ENTER()      return 2\n");
        out($f, "#define ZEND_VM_LEAVE()      return 3\n");
        out($f, "#define ZEND_VM_DISPATCH(opcode, opline) return zend_vm_get_opcode_handler(opcode, opline)(ZEND_OPCODE_HANDLER_ARGS_PASSTHRU);\n\n");
        out($f, "#define ZEND_OPCODE_HANDLER_ARGS_PASSTHRU_INTERNAL execute_data TSRMLS_CC\n\n");
    }
    foreach ($export as $dsk) {
        list($kind, $func, $name) = $dsk;
        out($f, "ZEND_API int {$func}(");
        if ($kind == "handler") {
            out($f, "ZEND_OPCODE_HANDLER_ARGS)\n");
            $code = $opcodes[$opnames[$name]]['code'];
        } else {
            $h = $helpers[$name];
            if ($h['param'] == null) {
                out($f, "ZEND_OPCODE_HANDLER_ARGS)\n");
            } else {
                out($f, $h['param'] . ", ZEND_OPCODE_HANDLER_ARGS)\n");
            }
            $code = $h['code'];
        }
        $done = 0;
        if (ZEND_VM_OLD_EXECUTOR) {
            if ($kind == "handler") {
                out($f, "{\n\treturn " . $name . "_HANDLER(ZEND_OPCODE_HANDLER_ARGS_PASSTHRU);\n}\n\n");
                $done = 1;
            } else {
                if ($helpers[$name]["param"] == null) {
                    out($f, "{\n\treturn " . $name . "(ZEND_OPCODE_HANDLER_ARGS_PASSTHRU);\n}\n\n");
                    $done = 1;
                }
            }
        } else {
            if (ZEND_VM_KIND == ZEND_VM_KIND_CALL) {
                if ($kind == "handler") {
                    $op = $opcodes[$opnames[$name]];
                    if (isset($op['op1']["ANY"]) && isset($op['op2']["ANY"])) {
                        out($f, "{\n\treturn " . $name . (ZEND_VM_SPEC ? "_SPEC" : "") . "_HANDLER(ZEND_OPCODE_HANDLER_ARGS_PASSTHRU);\n}\n\n");
                        $done = 1;
                    }
                } else {
                    if ($helpers[$name]["param"] == null) {
                        $h = $helpers[$name];
                        if (isset($h['op1']["ANY"]) && isset($h['op2']["ANY"])) {
                            out($f, "{\n\treturn " . $name . (ZEND_VM_SPEC ? "_SPEC" : "") . "(ZEND_OPCODE_HANDLER_ARGS_PASSTHRU);\n}\n\n");
                            $done = 1;
                        }
                    }
                }
            }
        }
        if (!$done) {
            gen_code($f, 0, ZEND_VM_KIND_CALL, 1, $code, 'ANY', 'ANY', $name);
        }
    }
    fclose($f);
    echo "zend_vm_execute.h generated successfully.\n";
}

开发者ID:rrehbeindoi，项目名称:php-src，代码行数:101，代码来源:zend_vm_gen.php

示例3: gen_vm


//.........这里部分代码省略.........
        out($f, "\n");
        out($f, "\tLOAD_OPLINE();\n");
        out($f, "#if defined(ZEND_VM_FP_GLOBAL_REG) && defined(ZEND_VM_IP_GLOBAL_REG)\n");
        out($f, "\t((opcode_handler_t)OPLINE->handler)(ZEND_OPCODE_HANDLER_ARGS_PASSTHRU);\n");
        out($f, "\tif (EXPECTED(opline)) {\n");
        out($f, "\t\tret = execute_data != ex ? (int)(execute_data->prev_execute_data != ex) + 1 : 0;\n");
        out($f, "\t\tSAVE_OPLINE();\n");
        out($f, "\t} else {\n");
        out($f, "\t\tret = -1;\n");
        out($f, "\t}\n");
        out($f, "#else\n");
        out($f, "\tret = ((opcode_handler_t)OPLINE->handler)(ZEND_OPCODE_HANDLER_ARGS_PASSTHRU);\n");
        out($f, "\tSAVE_OPLINE();\n");
        out($f, "#endif\n");
        out($f, "#ifdef ZEND_VM_FP_GLOBAL_REG\n");
        out($f, "\texecute_data = orig_execute_data;\n");
        out($f, "#endif\n");
        out($f, "#ifdef ZEND_VM_IP_GLOBAL_REG\n");
        out($f, "\topline = orig_opline;\n");
        out($f, "#endif\n");
        out($f, "\treturn ret;\n");
        out($f, "}\n\n");
    } else {
        out($f, "ZEND_API int zend_vm_call_opcode_handler(zend_execute_data* ex)\n");
        out($f, "{\n");
        out($f, "\tzend_error_noreturn(E_CORE_ERROR, \"zend_vm_call_opcode_handler() is not supported\");\n");
        out($f, "\treturn 0;\n");
        out($f, "}\n\n");
    }
    // Export handlers and helpers
    if (count($export) > 0 && ZEND_VM_KIND != ZEND_VM_KIND_CALL) {
        out($f, "#undef OPLINE\n");
        out($f, "#undef DCL_OPLINE\n");
        out($f, "#undef USE_OPLINE\n");
        out($f, "#undef LOAD_OPLINE\n");
        out($f, "#undef LOAD_NEXT_OPLINE\n");
        out($f, "#undef SAVE_OPLINE\n");
        out($f, "#define OPLINE EX(opline)\n");
        out($f, "#define DCL_OPLINE\n");
        out($f, "#define USE_OPLINE const zend_op *opline = EX(opline);\n");
        out($f, "#define LOAD_OPLINE()\n");
        out($f, "#define LOAD_NEXT_OPLINE() ZEND_VM_INC_OPCODE()\n");
        out($f, "#define SAVE_OPLINE()\n");
        out($f, "#undef HANDLE_EXCEPTION\n");
        out($f, "#undef HANDLE_EXCEPTION_LEAVE\n");
        out($f, "#define HANDLE_EXCEPTION() LOAD_OPLINE(); ZEND_VM_CONTINUE()\n");
        out($f, "#define HANDLE_EXCEPTION_LEAVE() LOAD_OPLINE(); ZEND_VM_LEAVE()\n");
        out($f, "#undef ZEND_VM_CONTINUE\n");
        out($f, "#undef ZEND_VM_RETURN\n");
        out($f, "#undef ZEND_VM_ENTER\n");
        out($f, "#undef ZEND_VM_LEAVE\n");
        out($f, "#undef ZEND_VM_DISPATCH\n");
        out($f, "#define ZEND_VM_CONTINUE()   return  0\n");
        out($f, "#define ZEND_VM_RETURN()     return -1\n");
        out($f, "#define ZEND_VM_ENTER()      return  1\n");
        out($f, "#define ZEND_VM_LEAVE()      return  2\n");
        out($f, "#define ZEND_VM_INTERRUPT()  return zend_interrupt_helper(ZEND_OPCODE_HANDLER_ARGS_PASSTHRU);\n");
        out($f, "#define ZEND_VM_DISPATCH(opcode, opline) return zend_vm_get_opcode_handler(opcode, opline)(ZEND_OPCODE_HANDLER_ARGS_PASSTHRU);\n\n");
        out($f, "\n");
    }
    foreach ($export as $dsk) {
        list($kind, $func, $name) = $dsk;
        out($f, "ZEND_API int {$func}(");
        if ($kind == "handler") {
            out($f, "ZEND_OPCODE_HANDLER_ARGS)\n");
            $code = $opcodes[$opnames[$name]]['code'];
        } else {
            $h = $helpers[$name];
            if ($h['param'] == null) {
                out($f, "ZEND_OPCODE_HANDLER_ARGS)\n");
            } else {
                out($f, $h['param'] . " ZEND_OPCODE_HANDLER_ARGS_DC)\n");
            }
            $code = $h['code'];
        }
        $done = 0;
        if (ZEND_VM_KIND == ZEND_VM_KIND_CALL) {
            if ($kind == "handler") {
                $op = $opcodes[$opnames[$name]];
                if (isset($op['op1']["ANY"]) && isset($op['op2']["ANY"])) {
                    out($f, "{\n\treturn " . $name . (ZEND_VM_SPEC ? "_SPEC" : "") . "_HANDLER(ZEND_OPCODE_HANDLER_ARGS_PASSTHRU);\n}\n\n");
                    $done = 1;
                }
            } else {
                if ($helpers[$name]["param"] == null) {
                    $h = $helpers[$name];
                    if (isset($h['op1']["ANY"]) && isset($h['op2']["ANY"])) {
                        out($f, "{\n\treturn " . $name . (ZEND_VM_SPEC ? "_SPEC" : "") . "(ZEND_OPCODE_HANDLER_ARGS_PASSTHRU);\n}\n\n");
                        $done = 1;
                    }
                }
            }
        }
        if (!$done) {
            gen_code($f, 0, ZEND_VM_KIND_CALL, 1, $code, 'ANY', 'ANY', $name);
        }
    }
    fclose($f);
    echo "zend_vm_execute.h generated successfully.\n";
}

开发者ID:jimjag，项目名称:php-src，代码行数:101，代码来源:zend_vm_gen.php

注：本文中的gen_code函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

PHP gen_db_date函数代码示例发布时间：2022-05-15

PHP gen_coa_pull_down函数代码示例发布时间：2022-05-15

GitbookIO/gitbook:

1 librespeed/speedtest: Self-hosted Speedt

librespeed/speedtest: Self-hosted Speedtest for HTML5 and more. Easy setup, exam

阅读：1204|2022-08-30

2 CVE-2022-27549

HCL Launch may store certain data for recurring activities in a plain text forma

阅读：585|2022-07-08

3 avehtari/BDA_m_demos: Bayesian Data Anal

avehtari/BDA_m_demos: Bayesian Data Analysis demos for Matlab/Octave

阅读：1108|2022-08-17

4 四维彩超怎么看性别？四维看男孩女孩诀窍

女人怀孕后，为了有一个健康聪明的宝宝，经历各种体检、筛查。其实这些体检和筛查中的

阅读：925|2022-11-06

5 DMTF/python-redfish-library: Python3 lib

DMTF/python-redfish-library: Python3 library for interacting with devices that s

阅读：826|2022-08-15

6 medfreeman/markdown-it-toc-and-anchor: m

medfreeman/markdown-it-toc-and-anchor: markdown-it plugin to add a toc and ancho

阅读：1323|2022-08-18

7 sydney0zq/covid-19-detection: The implem

sydney0zq/covid-19-detection: The implementation of A Weakly-supervised Framewor

阅读：470|2022-08-16

8 CVE-2022-1478

Use after free in SwiftShader in Google Chrome prior to 101.0.4951.41 allowed a

阅读：654|2022-07-29

9 世界上哪个国家离中国最远？

离中国最远的国家是阿根廷。从太平洋直线计算，即往东线走，北京到阿根廷的布宜诺斯艾

阅读：618|2022-11-06

10 shem8/MaterialLogin: Login view with mat

shem8/MaterialLogin: Login view with material design

阅读：718|2022-08-17

客服电话

电子邮件

PHP gen_code函数代码示例

示例1: gen_vm

示例2: gen_vm

示例3: gen_vm

请发表评论

全部评论

上一篇：

下一篇：

GitbookIO/gitbook:

Delphi日期时间UNIX

juleswhite/mobile-cloud-asgn1

kyamagu/matlab-json: Use official API: h

墙壁眼睛膝盖

GitbookIO/gitbook:

Delphi日期时间UNIX

juleswhite/mobile-cloud-asgn1

kyamagu/matlab-json: Use official API: h

墙壁眼睛膝盖

sevenjay/cpp-markdown: Cpp-Markdown is a

关于我们

产品与服务

解决方案

139-2527-9053