• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    迪恩网络公众号

archlinux/archinstall: Arch Linux installer - guided, templates etc.

原作者: [db:作者] 来自: 网络 收藏 邀请

开源软件名称(OpenSource Name):

archlinux/archinstall

开源软件地址(OpenSource Url):

https://github.com/archlinux/archinstall

开源编程语言(OpenSource Language):

Python 99.6%

开源软件介绍(OpenSource Introduction):

drawing

Arch Installer

Lint Python and Find Syntax Errors

Just another guided/automated Arch Linux installer with a twist. The installer also doubles as a python library to install Arch Linux and manage services, packages and other things inside the installed system (Usually from a live medium).

Installation & Usage

$ sudo pacman -S archinstall

Or simply git clone the repo as it has no external dependencies (but there are optional ones).
Or use pip install --upgrade archinstall to use as a library.

Running the guided installer

Assuming you are on an Arch Linux live-ISO:

# archinstall

Some additional options that are not needed by most users are hidden behind the --advanced flag.

Running from a declarative configuration file or URL

Prerequisites:

  1. Edit the configuration file according to your requirements.

Assuming you are on a Arch Linux live-ISO and booted into EFI mode.

# archinstall --config <path to user config file or URL> --disk-layout <path to disk layout config file or URL> --creds <path to user credentials config file or URL>

Available Languages

Archinstall is available in different languages which have been contributed and are maintained by the community.
Current translations are listed below and vary in the amount of translations per language

English                                                                                                                                       
Deutsch
Española                                                                                                                                                 
Française                                                                                                                                                
Italiano                                                                                                                                                 
Nederlands
Polskie                                                                                                                                            
Portugues do Brasil                                                                                                                                      
Português                                                                                                                                                
Svenska                                                                                                                                                  
Türk                                                                                                                                                     
čeština                                                                                                                                                  
русский
اردو

Any contributions to the translations are more than welcome, and to get started please follow the guide

Help?

Submit an issue here on GitHub, or submit a post in the discord help channel.
When doing so, attach the /var/log/archinstall/install.log to the issue ticket. This helps us help you!

Mission Statement

Archinstall promises to ship a guided installer that follows the Arch Principles as well as a library to manage services, packages and other Arch Linux aspects.

The guided installer will provide user-friendly options along the way, but the keyword here is options, they are optional and will never be forced upon anyone. The guided installer itself is also optional to use if so desired and not forced upon anyone.


Archinstall has one fundamental function which is to be a flexible library to manage services, packages and other aspects inside the installed system. This library is in turn used by the provided guided installer but is also for anyone who wants to script their own installations.

Therefore, Archinstall will try its best to not introduce any breaking changes except for major releases which may break backwards compatibility after notifying about such changes.

Scripting your own installation

You could just copy guided.py as a starting point.

However, assuming you're building your own ISO and want to create an automated installation process, or you want to install virtual machines onto local disk images, here is a minimal example of how to install using archinstall as a Python library:

import archinstall, getpass

# Select a harddrive and a disk password
harddrive = archinstall.select_disk(archinstall.all_blockdevices(partitions=False))
disk_password = getpass.getpass(prompt='Disk password (won\'t echo): ')

# We disable safety precautions in the library that protects the partitions
harddrive.keep_partitions = False

# First, we configure the basic filesystem layout
with archinstall.Filesystem(harddrive, archinstall.GPT) as fs:
    # We create a filesystem layout that will use the entire drive
    # (this is a helper function, you can partition manually as well)
    fs.use_entire_disk(root_filesystem_type='btrfs')

    boot = fs.find_partition('/boot')
    root = fs.find_partition('/')

    boot.format('vfat')

    # Set the flag for encrypted to allow for encryption and then encrypt
    root.encrypted = True
    root.encrypt(password=disk_password)

with archinstall.luks2(root, 'luksloop', disk_password) as unlocked_root:
    unlocked_root.format(root.filesystem)
    unlocked_root.mount('/mnt')

    boot.mount('/mnt/boot')

with archinstall.Installer('/mnt') as installation:
    if installation.minimal_installation():
        installation.set_hostname('minimal-arch')
        installation.add_bootloader()

        installation.add_additional_packages(['nano', 'wget', 'git'])

        # Optionally, install a profile of choice.
        # In this case, we install a minimal profile that is empty
        installation.install_profile('minimal')

        user = User('devel', 'devel', False)
        installation.create_users(user)
        installation.user_set_pw('root', 'airoot')

This installer will perform the following:

  • Prompt the user to select a disk and disk-password
  • Proceed to wipe the selected disk with a GPT partition table on a UEFI system and MBR on a BIOS system.
  • Sets up a default 100% used disk with encryption.
  • Installs a basic instance of Arch Linux (base base-devel linux linux-firmware btrfs-progs efibootmgr)
  • Installs and configures a bootloader to partition 0 on uefi. On BIOS, it sets the root to partition 0.
  • Install additional packages (nano, wget, git)

Creating your own ISO with this script on it: Follow ArchISO's guide on how to create your own ISO.

Unattended installation based on MAC address

Archinstall comes with an unattended example which will look for a matching profile for the machine it is being run on, based on any local MAC address. For instance, if the machine that unattended is run on has the MAC address 52:54:00:12:34:56 it will look for a profile called profiles/52-54-00-12-34-56.py. If it's found, the unattended installation will commence and source that profile as its installation procedure.

Testing

Using a Live ISO Image

If you want to test a commit, branch or bleeding edge release from the repository using the vanilla Arch Live ISO image, you can replace the version of archinstall with a new version and run that with the steps described below:

  1. You need a working network connection
  2. Install the build requirements with pacman -Sy; pacman -S git python-pip (note that this may or may not work depending on your RAM and current state of the squashfs maximum filesystem free space)
  3. Uninstall the previous version of archinstall with pip uninstall archinstall
  4. Now clone the latest repository with git clone https://github.com/archlinux/archinstall
  5. Enter the repository with cd archinstall At this stage, you can choose to check out a feature branch for instance with git checkout v2.3.1-rc1
  6. Build the project and install it using python setup.py install

After this, running archinstall with python -m archinstall will run against whatever branch you chose in step 5.

Without a Live ISO Image

To test this without a live ISO, the simplest approach is to use a local image and create a loop device.
This can be done by installing pacman -S arch-install-scripts util-linux locally and doing the following:

# truncate -s 20G testimage.img
# losetup -fP ./testimage.img
# losetup -a | grep "testimage.img" | awk -F ":" '{print $1}'
# pip install --upgrade archinstall
# python -m archinstall --script guided
# qemu-system-x86_64 -enable-kvm -machine q35,accel=kvm -device intel-iommu -cpu host -m 4096 -boot order=d -drive file=./testimage.img,format=raw -drive if=pflash,format=raw,readonly,file=/usr/share/ovmf/x64/OVMF_CODE.fd -drive if=pflash,format=raw,readonly,file=/usr/share/ovmf/x64/OVMF_VARS.fd

This will create a 20 GB testimage.img and create a loop device which we can use to format and install to.
archinstall is installed and executed in guided mode. Once the installation is complete, you can use qemu/kvm to boot the test media.
(You'd actually need to do some EFI magic in order to point the EFI vars to the partition 0 in the test medium, so this won't work entirely out of the box, but that gives you a general idea of what we're going for here)

There's also a Building and Testing guide.
It will go through everything from packaging, building and running (with qemu) the installer against a dev branch.




鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
varigit/linux-imx: i.MX Linux kernel发布时间:2022-08-15
下一篇:
ckjbug/kali-Linux-learning: 发布时间:2022-08-15
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap